How can I make a homemade video on iDVD transition from one chapter to the next?

For example, I usually have 4 chapters for my projects. I coach basketball so each chapter represents a quarter. When quarter 1 ends, it goes back to the menu...rather then going right into quarter?

Hi
Not 100% on Your question - but may be this helps.
Play all resp. one chapter at a time
Play All Button
1. There are NO - Play All - button in any version of iDVD
2. It can be faked in several ways
Easiest and most fault proof way is to make a doublet movie containing All and with
Chapters set to match. It will take up x2 space but is easy to understand and produce.
Cons: Tried this in iMovie’11 by Exporting out each part as a full Quality QT.mov then Importing back into new events and putting these into a new project (Play All project). Resulting DVD had Audio that was OK (as parts) - BUT the picture was very bad and standing photo were cut of in height. So the Play All movie has to be created from same material and exactly in the same way as the individual parts + then Chapters has to be set to match.
• It's said that one can put all movies into a Photo/SlideShow and this will also
give the function of a Play All button - Tested - and ONE HAS TO un-cheque - Scale pictures to TV-Safe area else it will be a black frame all around and a small picture !
Mike Evangelist1
You might be able to get close to what you want by using a slideshow in iDVD. (It's not widely known, but you can put videos in a slideshow.) If you set the slide duration to manual, playback will pause after each movie/slide, and you can continue with the 'next' button.
3. Using another program to do this e.g.. Roxio Toast™ where there is a Play All button option.
Summary
a. Making a Play All movie with same care as the individual Part movies - gives a very Good Result
b. Using Roxio Toast™ - also an usable way to go
Yours Bengt W

Similar Messages

ITunes--can't get a book on CD to go from one track to the next

I have 12.01 and Yosemite on a MacBook Pro. I had no trouble playing audiobooks on CD in previous versions, but now it will only play the same track over and over; I have to manually tell it to proceed to the next track. How do I tell it to play each CD from start to finish?

I'll rephrase my question since there's no response on my previous one.
How come the songs on my iPod play one song only and repeats it again without automatically going to the next song on the cd/collection.
At first, all went accordingly but I don't know what I did that they now don't play automatically but has to be done manually from one song to the next.
Thanks!

How can I make my flash video load faster?

How can I make my flash video created in Flash Pro CC load faster, as of now it takes 2 minutes to load?

This is the source file for video.php:
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd">
<html xmlns="http://www.w3.org/1999/xhtml" lang="en" xml:lang="en">
<head>
<title> VOPVIU Video
</title>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
<style type="text/css" media="screen">

#flashContent { width:750; height:600; }
</style>
</head>
<body style="background-color:#6E9BD2;">
<center>
<div width="100%" height="100%">
<h3 align="center"> Victims of Political Violence in Uganda <br/> (VOPVIU)
</h3>
<table border="0" width="52%">
   <td width="80%" align="center">
    <em>
     <font color="#FFFFFF">
<strong>
<p> Victims Of Political Violence in Uganda
</p>
Number of views 344       </strong>
</font>
    </em>
   </td>
   <td width="20%" align="right">
    <form action="vopviu.php">
     <div>
<input type="submit" value="Exit Video">
</div>
    </form>
   </td>
</table>
<table width="70%" height="70%" border="0">
<td width="70%" height="70%">
<center><div id="flashContent">
<center>
<object classid="clsid:d27cdb6e-ae6d-11cf-96b8-444553540000" width="750" height="423" id="faddu_vopviu" align="middle">
<param name="movie" value="faddu_vopviu.swf" />
<param name="quality" value="high" />
<param name="bgcolor" value="#666666" />
<param name="play" value="true" />
<param name="loop" value="true" />
<param name="wmode" value="window" />
<param name="scale" value="showall" />
<param name="menu" value="true" />
<param name="devicefont" value="false" />
<param name="salign" value="" />
<param name="allowScriptAccess" value="sameDomain" />

<object type="application/x-shockwave-flash" data="faddu_vopviu.swf" width="750" height="423">
<param name="movie" value="faddu_vopviu.swf" />
<param name="quality" value="high" />
<param name="bgcolor" value="#666666" />
<param name="play" value="true" />
<param name="loop" value="true" />
<param name="wmode" value="window" />
<param name="scale" value="showall" />
<param name="menu" value="true" />
<param name="devicefont" value="false" />
<param name="salign" value="" />
<param name="allowScriptAccess" value="sameDomain" />

<a href="http://www.adobe.com/go/getflash">
<img src="http://www.adobe.com/images/shared/download_buttons/get_flash_player.gif" alt="Get Adobe Flash player" />
</a>

</object>

</object>
</center>
</div>
</center>
</td>
</center>
</table>
</div>
</center>
</body>
</html>

How can I make my phone number active when viewing from a mobile device. My phone number is in my header in CSS

How can I make my phone number active when viewing from a mobile device. My phone number is in my header in CSS

See this support document http://support.apple.com/kb/HT5661

How can I get an inserted video (FLV) in Presenter 7 to stay on the screen once it has finished pla

How can I get an inserted video (FLV) in Presenter 7 to stay on the screen once it has finished playing? Right now it disappears once it is done. I'd like it to remain on the screen, or loop if possible, until the user manually moves the presentation forward.

Hi,
You may set the slide setting as 'Advance by user'.
So,
a. Insert flv on a slide.
b. On presenter ribbon goto Slide Manager .
c. Select the slide on which flv is inserted and set Advance by user 'Yes'
Hope this solves your purpose.
Thanks,
Alpi

I want to know how can I make my playlist in my iPhone be from oldest to newest?

I want to know how can I make my playlist in my iPhone be from oldest to newest?

You cannot do that from your phone. You can do that from your computer.

How can I make a global change so all controls and indicators labels on the front panel change to another colour?

How can I make a global change so all controls and indicators labels on the front panel change to another colour?
I need to change the front panel so that it can be used in a dark environment.

Hi
The only way I see, is to use the "Controls[]" property and iterate through all of them. But don't forget about nested elements (i.e. clusters, tab-controls, ...).
Thomas
Using LV8.0
Don't be afraid to rate a good answer...

TS2634 my iphone 4s wont slide from one screen to the next and I have to double tap on an icon to make it work. How do I fix this??

My iphone 4s wont slide from one screen to the next and I have to double tap on each icon to open it. I can hear siri talking and telling me what each icon or button I press is. How do I fix this problem? I have restored my phone to last saved but the problem still remains.

My problem was fixed via your suggestion. Thanks. Then I heard, though it hasn't been substantiated by anyone I know, that pushing the the round "start" button after the unit is on three rapid times will solve the problem. Do you know if this is valid info?
Message was edited by: wallyintouch

How to move apps from one screen to the next?

In order to organize a bit the screens after installing several apps, how can we move them from one screen to the next?
I've found it possible to place them in the lower bar and then replace them into the required screen but that's very slow...
Any other way?
Also, is it possible to place the apps where we want and not get them automatically reorganized (blanks filled)?
Thanks,

Sorry I guess the correct terminology would be 'virtual desktops'.
You pass from one virtual desktop to another swiping left or right on the phone.
I would like to switch conveniently an app (icon) from one virtual desktop to another.

How do I get text to flow from one page to the next in Pages 5?

How do I get text to flow from one page to the next in Pages 5 with the Maverick system?

What may be overlooked in Pages v5 is the notion of combining Text Boxes via the Menu > View > Show Arrange Tools. When you select two Text Boxes, an extra panel unfolds at the bottom of the Arrange Tools window. Uncheck one Text Box and this panel abruptly disappears.
One can achieve text flow effects between Text Boxes differently based on how one positions the Text Box overlap, and choice of effect above. Though not the accustomed flow found in Pages ’09 v4.3, flow does occur. Consider the possibilities of combining a Shape and a Text box to cut an irregular Text box.
If I create two Text Boxes and position them side by side with outline touching and choose Unite, this creates one larger Text Box and text flows across and down. On the otherhand, if I overlap the upper left corner of a lower Text Box over one above and to the left, then choose Union, pasted text fills the first Text Box and then flows across and down into the other box. Here is a Union example:
Intersect will leave a small Text Box where the two overlap, so not much value there. Subtract will cut a chunk out of one Text Box that is the size of the overlapping piece of the second Text Box:
And Intersect will leave an island in the center where the two Text Box overlap, with flow jumping over this bridge.
Clearly, this is not what we were accustomed to in the past, but with imagination, style, and layout tuning, it does offer alternative Text Box creativity and layout. Of course, there is the option of simply returning to the previous Pages version for true Text Box linking that most will want to use.

Can't get iTunes to move from one song to the next

I'm using iTunes 7.3.1 on an iMac with OS X 10.4.10. Everything was working fine, but now I can't get the playlists to move automatically from one song to the next. All the songs play if I double click on them individually, but when a song is finished playing, iTunes does not move automatically to the next song. I have to then double click on the next song I want to play. Furthermore, neither the "next," nor the "previous" track functions work. I have tried fiddling with the control settings (Repeat Off, Repeat All, Repeat One), but nothing I have tried makes a difference. Bottom line: If I want to sit at my computer and hear a playlist on iTunes, I have to manually click on each song I want to hear. Not too convenient when I want to listen while walking on my treadmill! Anyone suggestions would be appreciated.
iMac Mac OS X (10.4.10)

Have the tracks become unchecked? iTunes will skip unchecked tracks, so if they're all unchecked, iTunes will play one and then stop. If this is indeed the case, re-checkmark the tracks - Command-click on any checkbox will select or unselect them all - and you should then have continuous playback.
Hope this helps.

How do I stop iPod on my iPad from automatically advancing from one song to the next in my music library or in a playlist? I want iPod to play one song and then stop.

How do I stop iPod on my iPad 2 from automatically advancing from one song to the next in my music library or in a playlist? I want iPod to play one song and then stop until it's told to play the next song. In iTunes I can uncheck the checkmarks next to songs, but I can't see where to do that on the iPad 2.

How to use your iPod to move your music to a new computer

How to copy data from one transaction to the next (F-43)

All,
I have a situation where it appears the due date of an invoice is being copied from a previous invoice entry. Can anyone tell me is there a process where the user can have data default from one invoice to the next and if so is the due date (planning date) one of those fields?
Thanks
Sandra

I understand how it is supposed to work. However, I have production examples of that not happening and I'm trying to figure out how. The only way I have been able to replicate the issue is when I manually enter the due date when entering the invoice the calculation of baseline date + #of days does not happen. Users say they are not manually entering a date so I'm trying to find a way the date could be entered without the users knowledge.
Regards
Sandra

Why can't I save Tab Groups from one session to the next? When I restart, tab groups are cleared.

Why can't I save Tab Groups from one session to the next? Is there a way to save Tab Groups from the last session to the next time I start up?
Mark Kipperman

Yeah, if this is the way it's supposed to work its a useless and, dare I say, stupid "feature". Wouldn't the whole point of this be to have quick access to groups of pages. If I have to select them each time to create the group what is it doing for me?

How can I make a weekly 'to do' list? I don't want the list associated with a particular date and time; just a list of things to get done!

How can I make a weekly 'to do' list? I don't want it associated with a particular day or or time, just the week, preferably with the ability to check off or remove when done.

Thank you for the excellent reference Peddi. I had played with the OAMessageChoiceBean component yesterday, but I was able to tell from your instructions that "Picklist Display Attribute" and "Picklist Value Attribute" really are not for binding to the database EO. That was the key piece of information that had me confused.
In addition to adding the messageChoice component to the page, I needed to write some code to synchronize the picklist value with the corresponding code value, which I placed in am OAFormValueBean (hidden form field) which I could then bind to my application's database EO in the controller, running in the processFormRequest procedure:
/** Synchronize the catalog code with the selected catalog name */
protected void syncCatalogValues(OAPageContext pageContext,
OAWebBean webBean, MyApplicationAMImpl am) {
OAMessageChoiceBean mcb =
(OAMessageChoiceBean) webBean.findChildRecursive("CatalogName");
OAFormValueBean cc =
(OAFormValueBean) webBean.findChildRecursive("CatalogCode");
String catalogDescription = mcb.getText(pageContext);
if (catalogDescription != null) {
String catalogCode = am.getCatalogCode(catalogDescription);
cc.setValue(pageContext, catalogCode);
Along with a little code to get the catalogCode value from the LOVVO, that's all it took.
Thanks again. This was a great help.
Pete

How can I make a homemade video on iDVD transition from one chapter to the next?

Similar Messages

Maybe you are looking for