How can I make a line at 40 degree angle in Keynote 6

How can you make a line of 40 degrees (or anywhere between 40 to 45) angle in the new Keynote 6.2.2. It seems they took away that nice feature from the previous version. When I move one end of a line, it locks onto 45 when I get near that angle, and jumps off directly to 34 when I try to move away. Previously you could click on a line to transform the ends into red spots, and move them independently to any angle or length. Now it locks onto 45, or 135 or 90 etc. I don't have any of the guides on or any other feature. This is supposed to happen only when holding shift key (which is also a great feature). If it locks onto the magic angles without holding shift, then there is no sense if having that feature at all.

Press the command key when dragging, this switches off snapping and allows continuous placement.
If you like numerical control: Inspector > Format > Arrange > Rotate

Similar Messages

How can I make the line segment tool repeat several times?

How can I make the line segment tool repeat several times?

If this is what you want, hold the ~ key on your keyboard while dragging with the tool.
If you want spaced copies of the completed line, use the Transform Effects from the Effects menu.

How can I make command line interface (CLI)

Hi All,
How can I make command line interface ( CLI ) In Java using JTextArea or JTextField.
Thanks In advance..
Vikas Sahu

We do agree with your assessment and have plans to improve all of these aspects. Unfortunately, it takes a long time and a lot of work to turn "working" software into "simple to use" software, but we are working on it, and it is a high priority for us to make it simpler to use and develop for and administer Coherence.
Peace,
Cameron Purdy | Oracle Coherence

How can i make Trend lines in numers for iPad

Does numbers support trend lines? How can i make them?
Thank you in advance

Numbers on ipad does not give you the option of adding trend lines to your graphs at this time.
Jason

How can I make grid lines in ICAL darker?

How can I make the grid lines darker in I CAL ?

Numbers on ipad does not give you the option of adding trend lines to your graphs at this time.
Jason

How can I make a line appear on each page in exactly the same position?

Hello,
I have created a simple line at the top and bottom of my page that I would like to be replicated on every other page in the document.
Is there anyway in which I can make it recognise that I want these two lines to be used on every single page?
Thanks,
Matt

Select the lines > Format menu > Advanced > Move Object to Section Master

How can I make a gray box or gray screen in Pages over a few lines of text?

How can I make a gray box or gray screen in Pages over a few lines of text?

Thanks. Almost what I was looking for.
While that makes for a gray over the lines, it still does not form a box.
Any other suggestions to form a solid rectangular gray box?

How can I make my user input on the same line as the question?

The only way I know of doing it is
System.out.println ("Please enter an uppercase letter of the English Alphabet: ");
letter = dataIn.readLine ();But that makes Please enter an uppercase letter of the English Alphabet:
**User input here, a line down**So how can I make it all fit into one line with this sort of layout:
Please enter an uppercase letter of the English Alphabet: **USER INPUTS HERE, SAME LINE**

change your call from println to print.
check the API docs for this stuff, it tells you everything you need to know.
Good Luck
Lee

How can i make it auto line alignment in ScriptUI?

I want that form recognize new line character. (like '\n')
So I programmed like this. But it's not working.
var win =new Window ("dialog", "test");
win.orientation = "column";
var form1 = win.add ("edittext", undefined, "");
form1.onChanging = function(){
if(form1.text.search("\n") == true){
form2.active = true;
var form2 = win.add ("edittext", undefined, "");
var form3 = win.add ("edittext", undefined, "");
win.show();
How can i make it auto line alignment in ScriptUI?
Is it possible?

Your answer is not exactely I want.
But I got hint from your answer.
All I want is "How I can split multilined text into dozen edittext field?"
So I can make this from your sourcecode.
Your answer is so helpful.
Thank you.
var win = new Window ("dialog", "test");
win.orientation = "column";
var charLen=30;
var copytext = [];
var form0 = win.add ("edittext", [0, 0, 150, 200], "", {multiline:true});
form0.height = 100;
var form1 = win.add ("edittext", undefined, "",{readonly:true});
form1.characters = charLen;
var form2 = win.add ("edittext", undefined, "",{readonly:true});
form2.characters = charLen;
var form3 = win.add ("edittext", undefined, "",{readonly:true});
form3.characters = charLen;
form1.active = true;
form0.onChanging = function(){
form1.text = form0.text.split('\n')[0]
form2.text = form0.text.split('\n')[1]
form3.text = form0.text.split('\n')[2]
win.show();

How can I make an ant file that launches an AS project app in a debug flash player that traces to the flex console?

How can I make an ant file that launches an AS project app in a debug flash player that traces to the flex console?
Basically I like the control over the compiling process that I get by using Ant - but I really want traces to come up immediately without having to switch contexts.
I have an ant file that successfully launches a swf in the flashplayer - but I don't know how to make the flex console start displaying the trace output. I assume that I will have to point it to the appropriate trace output file - but I am not sure how to have ant even address the console. Is this possible?
Here is the the target node from my ANT file:
    <target name="launch">
        <exec executable="${FLASHPLAYER_EXE}" errorproperty="trace.output">
            <arg line="'${DEPLOY_DIR}\test.swf'" />
        </exec>
    </target>
Thanks for any thoughts, or alternatives!

For the record, I ended up using Logwatcher - it worked perfectly.
http://graysky.sourceforge.net/

How can i make my scrollpane in a way that at the opening of a frame it doe

How can i make my scrollpane in a way that at the opening of a frame it does not scroll down automatically?
code is below
import java.awt.*;
import javax.swing.*;
import javax.swing.*;
import java.awt.event.*;
import java.net.*;
import javax.swing.JOptionPane.*;
import java.io.*;
import javax.swing.colorchooser.*;
import javax.swing.filechooser.*;
import javax.accessibility.*;
import javax.swing.border.*;
import java.sql.*;
public class Signup extends JFrame
     JLabel p1,p2,p3,p4,p5,p6,uid,upass,cpass,fname,sname,hint,sl,ed,age,adr,cit,zip;
     JTextField uname,fnamet,snamet,hintt,adrt,adrt1,city,zipcode;
     JPasswordField upassw,cpassw;
     JComboBox sex,education,agegr;
     Signup()
     Container c=getContentPane();
     c.setLayout(null);
     c.setBackground(Color.white);
     /** JPanel c = new JPanel();
     c.setBackground(Color.white);
     int v = ScrollPaneConstants.VERTICAL_SCROLLBAR_ALWAYS;
     int h = ScrollPaneConstants.HORIZONTAL_SCROLLBAR_AS_NEEDED;
     JScrollPane jsp = new JScrollPane(c, v, h); ***/
p1=new JLabel("Create Your Icafe!ID",10);
     p2=new JLabel("Personal Information");
     p3=new JLabel("User Address");
     p4=new JLabel("Tell Us About Your Hobbiess (Optional) ");
     p5=new JLabel("Tell us something about what you like. This will help us choose the kind of content to display on           your pages.");
     p6=new JLabel("--------------------------------------------------------------------------------");
uid=new JLabel("User Id");
     upass=new JLabel("Password");
     cpass=new JLabel("Confirmation Password");
     fname=new JLabel("UserName");
     sname=new JLabel("SurName");
     hint=new JLabel("Hint Question");
sl=new JLabel("Sex");
     ed=new JLabel("Education");
     age=new JLabel("Age Group");
     adr=new JLabel("Address");
cit=new JLabel("City");
zip=new JLabel("ZipCode");
     uname=new JTextField(10);
     uname.requestFocus();
     uname.setToolTipText("UserName");
upassw=new JPasswordField(10);
     upassw.setToolTipText("Password");
     upassw.setEchoChar('*');
     cpassw=new JPasswordField(10);
     cpassw.setToolTipText("Confirmation Password");
     cpassw.setEchoChar('*');
     fnamet=new JTextField(10);
     fnamet.setToolTipText("FullName");
     snamet=new JTextField(10);
     snamet.setToolTipText("SurName");
     hintt=new JTextField(10);
     hintt.setToolTipText("Hint Question");
String[] gender={"[Select one]","Male","Female"};
     sex = new JComboBox(gender);
String[] edu={"[Select one]","S.S.C","Inter","Graduate","Post Graduate"};
     education= new JComboBox(edu);
String[] ageg={"[Select one]","0 - 15","16 - 35","36 - 70","70 - 100"};
     agegr= new JComboBox(ageg);
adrt=new JTextField(15);
     adrt.setToolTipText("Address");
     adrt1=new JTextField(15);
     adrt1.setToolTipText("Address");
     city=new JTextField(15);
     city.setToolTipText("City");
zipcode=new JTextField(15);
     zipcode.setToolTipText("ZipCode");
     p1.setBounds(200,70,160,30);
     uid.setBounds(350,100,160,30);
     uname.setBounds(400,100,160,30);
     upass.setBounds(335,140,160,30);
     upassw.setBounds(400,140,160,30);
     cpass.setBounds(260,180,160,30);
     cpassw.setBounds(400,180,160,30);
     p2.setBounds(200,220,160,30);
     fname.setBounds(330,260,160,30);
     fnamet.setBounds(400,260,160,30);
     sname.setBounds(335,300,160,30);
     snamet.setBounds(400,300,160,30);
hint.setBounds(315,340,160,30);
hintt.setBounds(400,340,160,30);
     sl.setBounds(370,380,160,30);
     sex.setBounds(400,380,160,30);
     ed.setBounds(335,420,160,30);
     education.setBounds(400,420,160,30);
age.setBounds(330,460,160,30);
agegr.setBounds(400,460,160,30);
p3.setBounds(200,500,160,30);
     adr.setBounds(340,540,160,30);
     adrt.setBounds(400,540,160,30);
     adrt1.setBounds(400,580,160,30);
     cit.setBounds(370,620,160,30);
     city.setBounds(400,620,160,30);
zip.setBounds(590,620,160,30);
zipcode.setBounds(640,620,160,30);
     Font font = new Font("SansSerif",Font.BOLD, 12);
     setFont(font);
     c.add(p1);
c.add(uid);
     c.add(uname);
     c.add(upass);
     c.add(upassw);
c.add(cpass);
     c.add(cpassw);
c.add(p2);
c.add(fname);
     c.add(fnamet);
c.add(sname);
c.add(snamet);
     c.add(hint);
c.add(hintt);
c.add(sl);
c.add(sex);
c.add(ed);
     c.add(education);
c.add(age);
     c.add(agegr);
c.add(p3);
c.add(adr);
     c.add(adrt);
     c.add(adrt1);
c.add(cit);
c.add(city);
c.add(zip);
c.add(zipcode);
     setResizable(false);
     //int a=DO_NOTHING_ON_CLOSE;
     //setDefaultCloseOperation(a);
     show();
     setSize(800,500);
// Border raisedBorder = new BevelBorder(BevelBorder.RAISED);
     setContentPane(c);
public static void main (String arg[])
     try{
     UIManager.setLookAndFeel("com.sun.java.swing.plaf.windows.WindowsLookAndFeel");
     }catch(Exception s)
     Signup swu=new Signup();

just try the following:
jsp.getVerticalScrollbar().setValue(0);after inserting and adding all your components. this will set the vertical scrollbar up to the very first line.
regards

How can I make a button that on press the object appears and on second press the object to disappear

Hello,
I'm quite new to flash programing, and I don't know how can I make a button that will make the object appear and disappear.Till now I have this code for the appear:
on (press)
    _root.top1.gotoAndStop(2);
    _root.topp.gotoAndStop(2);
    _root.mm1.gotoAndStop(2);
          _root.m1.gotoAndStop(2);
but from here I'm stuck.
Thank you for your help

What you can do is use the _visible property of the object to make it appear and disappear, or more correctly, use the opoosite of the _visible property. You should not put code "on" objects, keep it in the timeline.
If "object" is the instance name of the object you want to toggle, then in the timeline code you can use...
object._visible = false; // start with the object being invisible
yourButtonName.onRelease = function(){
    object._visible = !object._visible;
That one line in the function sets the object's _visible property to be the opposite of what it currently is.

How can I make new pages software spellcheck a selection like in appleworks?

How can I make new pages software spellcheck a selection like in appleworks?
I just installed pages a new download from apple store.
1. I cannot find any way to activate a spellcheck for a selection in a document.
2. I want to elemenate a red line under a word it doesn't like the spelling of.

How can I make the marker event pulse width longer in NI-FGEN?

I want to generate a marker event on PF0 line using NI-FGEN.I can set the marker event pulse width but when I was trying to make the pulse width units as 65 I was getting an error-1074115931.
How can I make the marker event pulse width longer without using script as I am using PXI-5412 which is not supporting Script.
Can anyone help me out in doing the same?

Unforunately, as you mentioned, the PXI-5412 does not support scripting mode. This will limit you to 1 marker using sequence mode. However, the PXI-5421 and PXI-5422 would allow the functionality.
As far as making the pulse width longer, and as the KnowledgeBase Article that you linked to discusses, I don't think it will be possible to create a marker as long as 1us - 10ms using just the Marker properties and without using scripting. You can still try to do this with property nodes and see if you can get a usable result. Start with an example such as "Fgen Arb Waveform Marker" and use the "Marker Position" value to set the start time (you would want 0 here it looks like), and then "Marker Event Pulse Width Value" to change the pulse length, but again I am afraid you will probably reach the maximum of 640 ns here. If you're not able to get this going with the property node, you will need either a FGEN card that supports scripting or another card that does Digital I/O to accomplish this.
Thanks!
Stephanie S.
Application Engineer
National Instruments

I have created a spreadsheet on numbers for ipad with a list of customers as a drop down menu. How can i make their address appear underneath when i select the customer?

I have created a spreadsheet on numbers for ipad with a list of customers as a drop down menu. How can i make their address appear underneath when I select the customer?
iselect the customer?

Hi bazza,
We won't be able to put the address from a formula into the same cell that you enter the customer's name. We can put the address in the cell under the customers name.
First let's take James advice and concatenate the address in the address table.
Here is the formula in G2
=CONCATENATE(B2&"
",C2&"
",D2&"
",E2)
It shows this way because after I clicked on B2 and typed [&"] (no brackets) I typed option-return
This gives you your new line. Then I typed the closing ". I repeated this for the rest of the address.
Next we want to bring this to your order sheet. I prefer using the two formulas OFFSET and MATCH instead of VLOOKUP.
base tells OFFSETwhere to start counting from. Click A1.
row-offset is for the row. we will use MATCH() -1 to give us the row.
What MATCH does is give you the row number where something is found and you can specify an exact match. I usually construct the MATCH formula first and then cut and paste it into OFFSET. MATCH looks like this: MATCH(A2,Table 1::A,0). A2 is what we are looking for, Table 1A::A is where we are looking (the entire column A), and 0 means we want an exact match. Can you see it inside the OFFSET formula? Notice that we had to subtract 1 from its result.
column-offset tells OFFSET which column A=0 so we want 6.
we ignore "rows", "colomns" we don't need them.
If this seems like too much, just break it down into small pieces.
quinn

How can I make a line at 40 degree angle in Keynote 6

Similar Messages

Maybe you are looking for