How can I make a master audio in Garageband 10.0.1?

There are any tutorial of the tools of Garageband 10.0.1 for mastering audio?
any advise?
Thanks!!

Apple has not yet released GarageBand tutorials for GarageBand 10.0. There is only the built-in Help, see: http://help.apple.com/garageband/mac/10.0/
The Bullets&Bones FAQ has a few nice videos, see: http://www.bulletsandbones.com/GB/GBFAQ.html
-- Léonie

Similar Messages

When i try to upload a .mts file from my Sony camera to Premiere Pro CC it refuses to play the audio! Ofcourse i could convert every single clip but it takes tons of time. How can i make Pr play audio track properly?

When i try to upload a .mts file from my Sony camera to Premiere Pro CC it refuses to play the audio! Ofcourse i could convert every single clip but it takes tons of time. How can i make Pr play audio track properly?

Does it not play at all or cannot you get the audio in the timeline?
Did you copy the entire card to the hdd and then imported the file via the Media Browser?
Did you source patch the audio tracks?

How can i make my outgoing audio work?

how can i make my outgoing audio work? it works only on speakerphone or headset...

Very vague.
Please explain

How can I make a synced audio track match the length of selected clips in a multicam seq?

I have a continuous multicam sequence of about 13 minutes containing a synced master audio track recorded from seperate microphones. I want to rearrange scenes from it into my final sequence, but when I select a range of clips to nest the entire length of audio gets pasted into the new sequence. I want to trim the audio to match just the clips I've selected but not lose sync. Is there a way to do this or is nesting not the way to chop up a sequence and rearrange the scenes in it?
Thanks.
Mike

Me too!!! I have a multicam sequence from 2 cameras with the audio staying on camera 1. I also have a seperate, continuous audio track recorded from microphones which I have synced to the timeline. I'm trying to select a group of sequential clips of different camera angles from the timeline to create scenes which I can insert into a final sequence but in a different order from how they are on the timeline. Let's say I want to take a series of clips that start at 3:30 on the timeline and go until 4:30 on the timeline. It will contain several cuts between the different cameras and I want to use that section as the first scene of my new sequence. If I select all of the clips in that time period and nest them into a new sequence, I only get the audio from camera 1 on the new TL. If I try window selecting those clips to include the continuous audio track, I get a new TL with 3 minutes and 30 seconds of the desired audio, then the video clips, and then the rest of the audio making a 13 minute TL. I just learned, after searching around, about marking in and out points on my multicam seq. and using the trick of "LIFTing" and then "UNDOing" to keep my multiseq intact, and then pasting into a new sequence. That works, but I'm only getting the audio track from off the camera. It won't select and lift the section of the other audio track that I want. I'm rushed for time so that's the way I've ended up finishing the video for now. The camera audio is just going to have to do although the mic recording is much better. The more I try to explain this the more confused I get and I'm sure everybody reading it does too. Any ideas? Thanks!

How can I make a mixed audio/video playlist?

I would like to make a playlist of music videos. iTunes seems to consider "music videos" as a separate type than video files. The problem is that some of my music videos are detected by iTunes as formal "music videos" while others are detected as "movies". While I can add them all to the same playlist, I can only play the playlist as one of the two types, and it will ignore the files of the other type. For example, if I access the playlist through my music playlists on my iPhone, it will only play the music videos that iTunes thinks are actual "music videos" and will not play the ones that iTunes thinks are "movies". Same problem in the opposite direction if I play the playlist through the movie/video interface.
How can I get them all to play together? They are ALL videos, and all in the same format (.mp4), so I'm not sure why iTunes is so confused.

Well, good news and bad news. I found out how to tell iTunes that all my music videos are, in fact, actual "music videos" and categorize them as such. In the "Get Info" screen for a track, there is a dropdown selector where you can pick the "meta" type, such as "Music Video", "Home Video", "Movie", "TV Show", etc. This allows iTunes and iOS to think they are all music videos and play them in the same list.
Unfortunately, this is not compatable with my third party device, which is now refusing to play my music videos in a playlist and will only play them one at a time (in a single-track infinite loop no less). Very frustrating!

How can i make the Master data extractor to delta enable

Hi,
I am working on 0EQUIPMENT_ATTR(Master data).
I want to load the data to ODS,
By default SAP has not provided delta for this Object.
can anybody know how to make this 0EQUIPMENT_ATTR to delta enable.
or any other solution.
its urgent..
help me
Madhu

Hi dear and welcome on board !
If a std datasource is not available in delta mode, you cannot change it in order to deliver a delta...if you consider your requirement absolutely necessary, you can go for a generic datasource (RSO2) and try to set a generica delta...
Hope it helps!
Bye,
Roberto
...please don't forget to reward the answers...it's THE way to say thanks here...

How can I make an mp audio file of a video clip that I'm working on in iMovie?

I have a video clip residing within an iMovie project. I want to create an audio file of this to take into Audacity so I can make cleaner audio edits (pulling up audio, deleting extraneous audio, etc) to insert as voice over in my movie project. iMovie is not sophisticated enough to do this. I don't see an easy way to "export as MP3" or other audio file. Am I missing something? Thank you.

Free option - Soundflower (http://cycling74.com/products/soundflower/)
Non-free option - Piezo (available from the AppStore)

How can I make all 40 audio clips the same volume?

Hello, all!
I'm finishing up a General Orientation video for new employees in Yellowstone National Park and am-this-close to being finished!
I'm creating the video in Premier Elements 9 with some video footage and some still photos blended together. (Yes, I tried to "Ken Burns" it... he would laugh out loud if he saw my version!)
I've narrated most of it in individual WAV. clips that I've inserted into the audio timeline under each video segment.
I have about 40 audio clips, and even though I used a decent microphone, I still find that each clip has a slightly different volume that is really noticeable when the video DVD plays on TV. I'm realizing that I should have made an effort to keep a standard distance from the mic when recording.   Hindsight is 20-20.
I have been trying to change the volume on each clip to make them all the same volume, and it's making me a little crazy.
Is there any way for me to capture all the audio at one time and make an adjustment that would make all of them the same volume?    I tried CTL-A and then did "normalize" on it, but it seemed to make very little/or no difference when viewing.
Any advice would be really appreciated!
Signed, the lone creative video girl in Yellowstone.

You are most welcome, and it has been a great day. Thanks!
Good luck, and pay close attention to the differences between Clip Keyframes and Track Keyframes. They accomplish the same result, but have differences.
Good luck,
Hunt

How can you make a field "key" in transformation rules - master data maping

Hello ,
We are in the process of creating some custom master data datasources for HR module. In this we are trying to extract fields from particular infotypes. In my situation we are pulling fields from only one table PA0032. From this table I am making a view where in I am selecting all the key fields from that table and including 2 other fields (Buliding name and room number). Now I create an ATTR master datasource with this view and check in RSA3 I see the data very good. All this is time dependent data like for Employee he might be in buliding AB room 32 first and then get moved to Buliding CD room 34. So we need to keep a history of the records. Now I replicate the DS in BW system, and create custom infoobjects for building and room no. I create an infoobject called Zworkaddress and dates I use 0VALIDTO and 0VALIDFROm. I make both the dates, bulding and room as attributes of ZWORKADDRESS. Now I map all the fields from datasource to the infoobject but field ZWORKADDRESS is on,y coming up as KEy field not the dates and subtype. Thats why I am getting only the last record not all the records of the emplyee work address.
We are using BI 7.0, so my question is how can I make the other fields as key's so that I can have all records.
Thanks in advance.

Kiran,
If you make any one time dependant system will create Dateto and date from internally. we don't need to add those.
1. for Employee, add Company Address as attribute. make this as Time Dependant. keep Subtype as Compounding key to your employer. then you will get Employee, Sub Type and Dates as key fields. you can have complete history of Employee Address change.
Hope this helps.
Nagesh Ganisetti.

How can i make audio player with osmf??

i want to know how can i make audio player with osmf and flex4.5 ?

Thanks again...I suppose I'd just like it louder in case the radio is on when the directions are given. The difference between the iPhone & Nokia is like night & day!
BTW, do you know if the Maps program is using data from my cell phone plan as we drive? Or are the corresponding maps downloaded into the phone once for the trip?
Thanks again!!

I do not have master card,visa card to make my apple ID,tell me how can I make my apple ID with out master card and visa card

I do not have master card,visa card to make my apple ID,tell me how can I make my apple ID with out master card and visa card

It will if you follow, exactly, the instructions on the page that lllaass included in the post above yours : Create an iTunes Store, App Store, or iBooks Store account without a credit card or other payment method

How can I make a decorative page border in Pages?

How can I make a decorative page border in Pages?

Hi Janet,
I suppose that you are asking how to include a decorative border of your design into a pages document. How you design that border is rather out of the range of these discussions. So, let's say that you have a graphic that approximates a picture frame and has the required dimensions to frame your content.
If you want to have the graphic appear on every page, Drag or Insert > Choose, to incorporate your design in to the document. The position it as you want it, and then Arrange > Send to Background and Format > Advanced > Move Object to Section Master.
If there is more than one section in your document, there may be more considerations, but if you do this at the outset in the creation of your document, the design of the first section will flow to subsequent sections.
Regards,
Jerry

How can I make a book/podcast listening playlist for a blind person?

How can I make a book/podcast listening playlist for a blind person? How can lots of content be loaded, so that no navigation is required, for hundreds of hours of enjoyment?
I wanted to create a single playlist with hundreds of hours of books and podcasts for my grandmother who is blind. Then I planned to use something like the app CarTunes which basically makes the touch screen simply a gigantic pause/play button for an already created playlist. This is perfect for a blind person. The problem: Apple no longer allows you to have a playlist with Audible Books and Podcasts. I have tried; but the podcasts and books are stripped from the playlist. It seems like all podcast and book players require navigation. (How aggravating!?)
Any help in creating hundreds of hours long spoken (selected between books and podcasts) audio content playlist for a blind person would be much appreciated!!!!

Well, good news and bad news. I found out how to tell iTunes that all my music videos are, in fact, actual "music videos" and categorize them as such. In the "Get Info" screen for a track, there is a dropdown selector where you can pick the "meta" type, such as "Music Video", "Home Video", "Movie", "TV Show", etc. This allows iTunes and iOS to think they are all music videos and play them in the same list.
Unfortunately, this is not compatable with my third party device, which is now refusing to play my music videos in a playlist and will only play them one at a time (in a single-track infinite loop no less). Very frustrating!

How can I make my own ringtone in iTunes 11.0.2?

I used to convert the audio to an ACC file after I cut it. However, there's no longer that button, how can I make them into tones after cutting the audio? The new version of iTunes confuse me

How about creating the ringtone on your iPhone? You may want to check this out:
http://www.macworld.com/article/2010514/how-to-create-a-ringtone-on-your-iphone- with-garageband.html
You need GarageBand 1.3 for iOS - is your iPhone compatible with that?

I need to play a song on a Keynote presentation, how do I do this ? I use to drag and drop the mp3 in Keynote but it stops playing when the slide move to the other one... how can I make the song keep playing through the whole presentation ? Thanks.

I need to play a song in a row in a Keynote presentation, how do I do this ? I use to drag and drop the mp3 in Keynote but it stops playing when the slide move to the other one... how can I make the song keep playing through out the presentation ?
Thanks.

Drag the file into the audio window in the Document inspector...

How can I make a master audio in Garageband 10.0.1?

Similar Messages

Maybe you are looking for