How can I make a pre made vector  outline thiner?

I downloaded a free vector shape, but the outline is to thick, how can i make it thinner so it matche's up with my other vector shape's?

Wade_Zimmerman wrote:
what on earth are you talking about  -0p2 equals 2 pts because there is no such thing as -0 picas so what you are left with is 2.
You’re usually right about a lot of things, especially Illustrator, but you’re wrong about this one, Wade.
Why does -0p3 work in InDesign? Why does -1p0 or -1p6 (ie -18 pt) work in Illustrator? When I use the cursor keys to increment values I can press up to increase the increment by 0p3, but I cannot go below 0p. Press down and the value goes to 0p3.0
to write -0p2 is a bit crazy when you should be writing -2pt. The whole thing you want fixed is a bit strange i can't imagine why you would even need this.
Look at this screen shot of the control panel from Illustrator 15:
If I enter -3pt when the default units are picas, the dialogue changes it to this:
“-0p3’ means -3 points, using the long established convention that PageMaker, InDesign, Photoshop, QuarkXPress, FreeHand, and (except for this bug) Illustrator have supported for years.
Bug.

Similar Messages

  • How can I make one list of all events I have in over 30 libraries I made

    How can I make one list of all events I have in over 30 libraries I made?

    The only way I know of is to take a screenshot of the Photo mode with the View ➙ Show Event Titles selected.  That will give you a list of sorts.  Might take more than one screenshot per library.
                   Click to view full sized
    OT

  • How can iPhone videos sent to another iPhone be made clear like they were recorded even though it sent as a text. with iMessage it's clear but when it's not available the quality *****, how can I make a received vid clear again??? help

    how can iPhone videos sent to another iPhone be made clear like they were recorded even though it sent as a text. with iMessage it's clear but when it's not available the quality *****, how can I make a received vid clear again??? help

    This is determined by your carrier. SMS/MMS is a poor man's email and by that I mean SMS/MMS has major restrictions and limitations compared to email but is a cash cow for cell phone carriers.
    Upload the video to YouTube when connected via wifi and send the YouTube link via text.

  • How can I make a new genius mix? Apple has made two automatically, but I would like one based on other genres within my iTunes library. I have tried updating my genius mixes to no avail.

    How can I make a new genius mix? I do not want to make a genius playlist. Genius has already created two mixes but I would like another based on other genres within my extensive music library. I have tried updating Genius from Store>Update Genius but to no avail. Thank you!

    Hi. The two user tips both describe a sequence of steps that should get your library from the point where it threatens to wipe data from your device to where it is syncing normally, while recovering as much information as possible. It may still be necessary to wipe and reload the device but this should only take place once all the data that can be recovered has been recovered.
    Doing step 1 of 8 and then complaining things aren't the way you want them to be yet strikes me as premature...
    Since you appear to have all your media content, and we are discussing an iPod classic, not an iOS device, the main worries are already taken care of. What's left is ratings, playcounts, playlist membership and checked status. Since your device holds only part of your library at best you could only recover the missing data for the content that is on the device using third party tools.
    Recreating the previous checked/unchecked status of every track in your library from where you are now may not be that easy. Syncing with selected playlists has many advantages, one of which would have been that you would have a named playlist that could have been retrieved by 3rd party software if you had used this method.
    You haven't explained what caused your problem in the first place, but if you have a Previous iTunes Libraries folder holding old copies of your iTunes database (generated with each iTunes update) then it would be possible to restore the most recent of these and then update the library with any changes in your media folder.
    BTW Apple doesn't offer free support for this kind of issue with iTunes.
    tt2

  • How can I make sure iTunes doesn't stop updating my podcasts

    OK I'm subscribed to multiple podcasts, but I don't always get a chance to listen to them so some of them will stop updating and it says something like "iTunes has stopped updating this podcast because you haven't listened to any episodes lately".
    How can I make sure it doesn't do that? When I do get to listen to my podcasts, I would really like it if they weren't 3 weeks old.
    Message was edited by: MacAttakk

    someone made a script that fixes this. It seems to work for me. If you want it to do it automatically just make an iCal even for every 3 days or something that runs this script.
    http://dougscripts.com/itunes/scripts/download.php?sc=updateexpiredpodcasts

  • How can i make the report previewer show a PDF file instead of HTML?

    Hi there,
    i made a report which can be called within a form by a button. This report is a PDF-report.
    I also have an option in the application to start the report from the menu. Then i get the Launch Report Form by Headstart. Here i can fill in for Desformat (in the options) PDF and Output to PREVIEW. Still it generates me a HTML report in my browser. How can i make it work so that the PREVIEWER will show me a PDF-report instead of the HTML?
    Kind regards,
    Dave

    You can not use PREVIEW as output type in webbased forms/reports. Try using as output type CACHE or FILE.

  • How can I make my imap email not take the emails off the server?

    How can I make my imap email not take the emails off the server when I delete them on my iPad?
    Can anyone help me whith this?
    I tried to use the pop account in gmail settings but that was downloading all my emails sice 2008 ( more than 300 deleted emails tha can only be found in the deleted email box), when I just have 5 or 6 email in the inbox .
    How can I solve this????
    Thank u all...

    I have the same problem. For years I have been able to delete emails from my ipad and have them remain on the server so I can deal with them on the desktop. Now they get deleted from the server when deleted from the ipad, which makes the ipad unless for reading mail.
    You answered to delete the email account on the ipad and set up a new one as a pop. I have made many attempts to do that in the  incomping mail server "Host Name" field but it always errors out even when the host name is equal to what my desk top has. So I can see no way to change away from IMAP. I started with an ipad 1 and now have an ipad 2.
    Rachael

  • How can I make a row of cells containing 3-digit decimals, who's values resulted from calculations within the spreadsheet, appear as durations of minutes and seconds?

    Row 6 in this spreadsheet is the result of Row 2/Row 3 as evidenced by the formula listed while Cell Y6 selected. How can I make the values in this row appear as durations of minutes and seconds rather than 3-digit decimals? For example, rather than appearing as 9.84 I would like the value of Cell Y6 to appear as 9:50 or 9min 50sec. (obviously .84x60seconds 50 seconds). I tried changing the cell formats from "number" to "duration," but no change is made. Using the "duration" format does however work if I am manually entering the decimal value into the cell rather than allowing it to result from another caluclation within the spreadsheet. Is there a solution to this within Numbers '09? You can see why I would want the "pace" displayed in minutes and seconds. Thanks in advance!
    Ryan

    Hi Ryan,
    You wrote:
    "The problem is that my "Distance" is a row of automatically generated values resulting from ((Row1/60)*Row 6). Changing the format of Row 1 to minutes causes row two to be expressed as a duration, which obviously it shouldn't because it is a distance. The spreadsheet has to be designed so that all I have to manually input on each entry are Row 1 Values (Time) and Row 6 Values (Average Pace). The rest of the cells must be automatically poulated as a result of formulas."
    I'm assuming that where you say "Row 1" in this you mean "Row 2", which is labeled "Time" in the example in the OP.
    In the original post, you presented a formula from cell Y6. Replacing the Header labels in that formula's cell reference with the Addresses of the referenced cells, the formula was:
    Y6: =Y2/Y3
    In this post, you are saying that Y6 contains entered data: "...all I have to manually input on each entry are Row 1 Values (Time) and Row 6 Values (Average Pace).
    Which is correct?
    Regards,
    Barry

  • How can I make a fade out effect at the end of the song in garageband for iPad?

    I want to made this effect but honestly I have no idea about what I have to do. u.u Please help.

    ClaudioWalrus wrote:
    How can I make a fade out effect at the end of the song in garageband for iPad?
    GB for iPad doesn't have volume automation, you'd need to import the project into GB on a Mac to create the fade with a volume curve.
    as an alt, finish your song and export the audio file, then import the audio file in an audio editor and create a volume fade with that:
    http://www.bulletsandbones.com/GB/GBFAQ.html#audioeditors
    (Let the page FULLY load. The link to your answer is at the top of your screen)

  • How can I make a survey automatically identify the user in the results?

    How can I make a survey automatically identify the user in the results (so that it won't be anonymous)?

    I am not sure what information to provide.  Here is what I am trying to do.  I am trying to create an HR questionnaire with multiple choice questions and several multiline textboxes to capture comments.  I want to send it out by email address and/or embed the questionnaire somewhere on the company's intranet website.  But we don't want the questionnaire to be anonymous. If someone makes a particular comment, we want to be able to communicate with the person who made that particular comment.  How would we be able to trace the person? By email address, or by user ID?

  • How can i make my hyperlinks open in a new window or tab?

    how can i make my hyperlinks open in a new window or tab?

    The program is InDesign… we need to cease links which will open the linked document in a separate window.  Also, the links must be maintained once a pdf is made and the files moved to another computer….

  • How can I make the rolumn and row headers appear on the printed sheet?

    I am working in Numbers'09. I want to print out my chart with the column letters and row numbers showing.
    How can I make the rolumn and row headers appear on the printed sheet?

    g,
    Those annotations are called "Labels", and they are only visible during editing when a cell selection is made within the table. If you need to have the labels on your final output, you can create labels in Text Boxes and position them adjacent to the table.
    Jerry

  • How can I make Calen Mob pick up the right colors

    How can I make Calen Mob pick up the right colors from Google Calendar. In fact, how can I contact the developer that made Calen Mob Pro. I hear it was Blue tag but they either sold it or dropped it because they make no claim for it.  Does anyone kknow of a group calendar for IOS that will report the color choices as well as the  data? Calenmob Pro just brings in one color for every date and appt. Thanks!

    Where did you get LR2.2? The most recent public version is LR2.1!
    Try an external EXIF reader like EXIFReader.
    Don

  • How can I make my buttons be gone forever?

    Just starting out with Flash and have run into a problem. I have several scenes with buttons that can be pressed once and then they disappear using:
    myBtn1.onRelease = function(){ this._visible=false}
    But when I go back to the scene the buttons reappear. How can I make my buttons be gone forever?

    if you have more than 1 button that should be made not visible at any given time, you'll need to use an array to store those button references.  otherwise, you can use:
    var alreadyRemoved:Boolean;
    if(alreadyRemoved){
    myBtn1._visible=false;
    myBtn1.onRelease=function(){
    this._visible=false;
    alreadyRemoved=true;

  • 3D bar charts export as jagged PDFs - how can I make them smooth?

    I want to export my 3D bar charts as PDFs, but they export without anti-aliasing or smooth vector lines. The bars are jaggy, not clean. How can I make them higher quality?
    I've checked my system settings and those in Acrobat 7 Professional, the 'smoothing' is turned on. I can't find any similar posts here either.
    Any ideas?

    I want to export my 3D bar charts as PDFs, but they export without anti-aliasing or smooth vector lines. The bars are jaggy, not clean. How can I make them higher quality?
    I've checked my system settings and those in Acrobat 7 Professional, the 'smoothing' is turned on. I can't find any similar posts here either.
    Any ideas?

Maybe you are looking for