How can I make a projection of an image (diaporama) with LabView?

Hi, I would like to project an image (or better a matrix stored in a table) on a second screen (or videoprojector, or whatever) connected to the computer. In two words I would like to do what PowerPoint does by pressing on "diaporama".
Does somebody knows if that is possible with LabView (without scrolling the LabView window on the second screen since that doesn't make a FULL SCREEN projection of the image)?
Hope somebody can help
Thanks
TonyMontana

Tony,
I am not sure I understand exactly what you are trying to do as I never use PowerPoint.
At NIWeek in 1999 (if I recall correctly) David Moore gave a presentation that used a program he wrote entirely in LV.
I have a program which runs a slide show on a second monitor (projector). All the controls are on the main screen and the display on the second monitor consists of a simple subVI with a picture indicator sized to fit the projector window. The subVI keeps its front panel open and gets called every time the image updates.
This is a work in progress and has not yet been used in public.
Lynn

Similar Messages

How can i make a picture from a video file with final cut pro x?

how can i make a picture from a video file with final cut pro x?

Go to the "share" menu, select "save current frame"

HT201343 How can I make my 2013 Mac Pro been compatible with airplay & mirroring display

How can I make my 2013 Mac Pro been compatible with airplay & mirroring display ?
Thanks for any help !

2013 Mac Pro would be compatible
http://support.apple.com/kb/ht5404

In snow leopard, 2 fingers to the left on the mouse went back to the previous page. In Lion, it opens the dashboard. How can i make firefox go back to previous page with two fingers left on the mouse??

In snow leopard, 2 fingers to the left on the mouse went back to the previous page. In Lion, it opens the dashboard. How can i make firefox go back to previous page with two fingers left on the mouse??

Hi,
I don't know of a preference, but have you used ⌘-T in iCal?
Best wishes
John M

HT1218 How can I make my first generation AirPort Express work with Mountain Lion? I have a 13" MacBook Pro (non-retina).

How can I make my first generation AirPort Express work with Mountain Lion? I have a 13" MacBook Pro (non-retina).

Hi guys, recently had the same issue. You require an older version of Airport Utility to configure the older Airport Express. It can be found here.
http://www.google.com/url?sa=t&rct=j&q=airport%20utility%205.6%20for%20lion&sour ce=web&cd=1&ved=0CFMQFjAA&url=http%3A%2F%2Fsupport.apple.com%2Fkb%2FDL1482&ei=Ip MBUPLwLoq42wW4puXMBA&usg=AFQjCNGOFUPMM0ZjsKeyj5CcL2oe9Eaf7A

How can I make my Apple tv remote stop interacting with my MacBook and my iMac? Everytime I press the reote, the sound will go up or down on my computers or they will wake up.

How can I make my Apple tv remote stop interacting with my MacBook and my iMac? Everytime I press the reote, the sound will go up or down on my computers or they will wake up.

Welcome to the Apple community.
If you don't want to use a remote with your computer the easiest thing to do is just to turn the IR off. (System Preferences/Security/General)
If you still want to use your computer remote then you must pair your computers remote with the computer AND the Apple TV remote with the Apple TV.
To pair a remote with a device hold down the menu and FF buttons together for six seconds or until you see a chain icon on screen (best take the computer into another room, or turn it off, when you do this)

How can I make a PDF file from each folders with layers, where each page is a each folder?

How can I make a PDF file from each folders with layers, where each page is a each folder?

I found an answer to my own question. A work around of sorts.
Download Photoshop Elements 6 for Macintosh. With PSE6 I made a slide show with 550 images 1920x1200, without thumbs. I ran into one problem making the slide show. My images contained 4 images which had not ben created by Photoshop and could not be included in the slide show. Opening the images in Photoshop CS4 and re-saving them still did not make then acceptable. Not a big deal. I probably could have fixed the four images by stripping all EXIF data before opening them in Photoshop. BTW, PSE6 made the slide show in demo mode.
I hope the bug in Photoshop CS4 will be fixed in Photoshop CS5.

How can I make the voice very loud when navigating with my google gps app?

How can I make the navigation voice on my google gps app VERY loud?

I did a search for the Citibank virtual credit card and other similar words and could find nothing.

How can I make the project into 16:9 when using 2 4:3 aspect ratio videos in project

I want to make a project that is 16:9 but am adding a video of a talking head (speaker) fimed in 4:3 and I want to place that in upper left corner of project and then add a video of the powerpoint they were speaking to also filmed in 4:3

There are a number of challenges to doing this, including the fact that doing so will require lots of rendering and the even bigger fact that, if you're planning to show this on a TV, up to 10% of the edge gets cut off, which means that any text you've got outside of the "safe zone" might be off the screen.
But, with those caveats, place the upper left corner video on Video 1, select it and open Applied Effects. Open Motion and set the Position and Scale so that your video sits in the upper right corner.
Add your images to Video 2 and do the same thing, setting Position and Scale so that it is in the lower left of your screen. Then add you main video to Video 3 and set its Position and Scale so that it is in the right 2/3 of your video frame.
As I say, there are a number of potential problems with this kind of composite, so I'd recommend you do a very short test composition first, then output it and show it on the device or web site you hope to display it. That way you'll get the bugs out before you go investing a week's work into something that has you scrambling to fix at the last minute.

How Can I Make Smooth Moves of Still Images?

I'm doing a lot of moving stills in a current project, but I can't figure out how to add acceleration curves to the moves. I know the pen tool has a "smooth point" to add curves to keyframes, but I don't know where to apply them. I can apply them in the "scale" setting in the viewer, but not "center."
I'm sure there's an easy way, but I can't figure it out. Id prefer to do it in the canvas if possible. I want to reposition, slide, and zoom my photos so they don't "clunk" on the keyframes.

In the Canvas, make sure you're in Image + Wireframe mode.
Set up the basic move:
- position the layer at one end of the motion
- set one keyframe on Center
- move the playhead to the other end of the intended motion and move the layer again.
Right-click on the closing keyframe and choose Linear. Look really closely at the motion path (a series of small purple squares) in the Canvas. Connected to the currently selected keyframe (green square) are two circles, one dark purple and one light purple.
The lighter circle controls the curve of the motion. Adjusting this will change the path the object moves along.
The darker circle controls the acceleration. You'll see the smaller purple squares bunch up or spread out as you drag the darker purple circle; the further away the squares are from one another, the faster the motion.
Since you want to keep the path the same but change the acceleration, just move the darker circles. Ease In/Ease Out will start the process for you but with less control.
If all that doesn't give you the results you're looking for, consider using Motion or iPhoto instead. Some third-party plug-ins can also help if you're doing this a lot.

How can i make changes from the user in TabBar with more button persistent? I´m using the Storyboard.

I have build an App with more than 5 Tabs, the user can change the order of the items, but this is not persitent.
How can i fix this on iOS 7 and i´m using the Storyboard.

Can I do it afterwards ?
Yes. In addition to what Bee Jay said, here are some other tips.
First record a pattern that's a few bars long, and don't tweak any knobs while you're doing this. Set a Cycle Range, because we want to play this pattern over and over again. Press A to make Automation visible (although there isn't any yet).
Find the channel strip for this track, either in the Inspector or in the Mixer window. Just above the meter, look for the button that says "Off." Hold down this button and a menu will appear. Select "Touch." Press Play. As the pattern plays the first time, pick a knob in the ABL2 window, and mess with that knob. At the end of the pattern, let go of the knob, and then watch what the knob does as the pattern plays again. Then as the pattern plays some more, mess with another knob. You'll notice that curves are being drawn in the Arrange window as you mess with the knobs.
This should help get you started.

How can I make a simple 1 channel I/O with RS232?

Hy all,
I just want make a simple 1/0 output over RS232. How can I programme it in LabView? Noemaly we send datas over RS232, but I want just a High or a Low on the TxD (or may on DSR or CTS).
Thanks
Petric

You are lucky, here is a 6.0 version ... I hope it works
CC
Chilly Charly (aka CC)
E-List Master - Kudos glutton - Press the yellow button on the left...
Attachments:
DTR control 2.vi ‏10 KB

How can I make my 4.2.1 ipod compatible with my system and itunes

I have an older ipod that I like and use (4.2.1) A newer version of itunes installed itself into my computer (11.1.4) and now when I plug in my ipod to sync and open itunes I get a pop up box stating that "The file itunes itl. can not be read because it was created by a newer version of itunes". Now I can not sync, add pictures or music to my ipod. How can I correct this situation so I can once again use itunes as my main library? I have tried everything...please help

Try the following user tip:
Empty/corrupt iTunes library after upgrade/crash

With Java8, how can I make my tooltips behave as they did with Java7?

Since some of my customers may want to run Java8, I decided to try my application with Java8. There were quite a few problems most of which were resolved when I decided to do a revamp in anticipation having to have the system run on Android and ios platforms.
I now have everything working except Tooltips.
With Java7, Tooltips were not styled and the default was satisfactory. On Java8, the Tooltips had a black background with white lettering with too small a font size. Also, since I was defining a background in .root, there was an addition rectangle to the right and below the tooltip. After much trial and error, I was able to get a satisfactory Tooltip in Java8 although I cannot see how to implement the page corner. To remove the background rectangle (which also appeared on my ChoiceBoxes, I had to style .root.popup). Below is the relative section of my css file.
However, when I run this under Java7, I get a Tootip with a transparent background and black lettering.
Is there anyway I can get the same tooltip styling to work with both Java versions?
Thanks for the help.
Alex
    Document   : e3css
    Created on : Jul 25, 2012, 12:12:40 PM
    Author     : Admin
    Description:
        Purpose of the stylesheet follows.
.root {
    -fx-base: rgb(50,250,50) ;
    -fx-background-color: linear-gradient(to bottom, rgb(0,227,0), rgb(50,160,50));
    -fx-focus-color: green ;
    -fx-accent: green ;
    -fx-border-color: black ;
    -fx-border-width: 2 ;
    -fx-border-style: solid ;
    -fx-border-radius: 10,10,10,10 ;
    -fx-background-radius: 10,10,10,10 ;
.root.popup {
   -fx-background-color: transparent ;
   -fx-border-color: transparent ;
.tooltip {
    -fx-background-color: gold ;
    -fx-font-family: Verdana,Arial,Helvetica,sans-serif;
    -fx-font-size: 12px;
    -fx-font-weight: bold;
    -fx-fill: white;
    -fx-background-radius: 10,10,10,10 ;
    -fx-border-color: black ;
    -fx-border-width: 2 ;
    -fx-border-style: solid ;
    -fx-border-radius: 10,10,10,10 ;

See:
styles - How can I keep the JavaFX 7 skin with JavaFX 8? - Stack Overflow
Which I replicate here:
Simply put:
setUserAgentStylesheet(STYLESHEET_CASPIAN);
...as the first line of your program (in the start() method), or run it with the JVM flag -Djavafx.userAgentStylesheetUrl=caspian.
Note the above method isn't present in JavaFX 2.x, so if you want to do this in code that compiles and runs on both Java 7 and 8, unfortunately the only way around it is via reflection.
The above demonstrates how to keep the entire look and feel of caspian (from Java 7) for Java 8.
If you want the default JavaFX 8 style (modena) for everything but tooltips, you can probably just copy and paste the tooltip styling css from caspian.css and put it in your application stylesheet (though I have not tried that so I'm not 100% sure it will work correctly for you). You can find modena.css and caspian.css in the JavaFX sources: java - Where to get the JavaFX sources? - Stack Overflow. For example caspian.css is here and it's tooltip styling code is copy and pasted below:
.tooltip {
-fx-skin: "com.sun.javafx.scene.control.skin.TooltipSkin";
-fx-background-color:
linear-gradient(#cec340, #a59c31),
linear-gradient(#fefefc, #e6dd71),
linear-gradient(#fef592, #e5d848);
-fx-background-insets: 0,1,2;
-fx-background-radius: 0 0 13 0;
-fx-padding: 0.333333em 0.666667em 0.333333em 0.666667em; /* 4 8 4 8 */
-fx-effect: dropshadow( three-pass-box , rgba(0,0,0,0.6) , 8, 0.0 , 0 , 0 );
.page-corner {
-fx-padding: 4.5 4.5 4.5 4.5;
-fx-background-color: linear-gradient( from 0% 0% to 50% 50%, #fcf7b6, #a59c31);
-fx-shape: "M0,0H9L0,9Z";
-fx-effect: dropshadow( three-pass-box , rgba(0,0,0,0.6) , 4 , 0.0 , 0 , 0 );

How can embed fonts into a PDF? Additionally, how can I make so that the PDF then opens with the embedded font?

I need to embed a standard font (such as Times New Roman) and make it so that the document opens with this font presented. I see information on embedding fonts, but nothing related to the second part of my question. Thanks.

The second part is automatic. If you manage to embed a font (for example with Preflight in Acrobat Pro), then a PDF viewer should use that. In some cases a locally installed font of the SAME NAME might take preference, which is only a difficulty if a private edited font is used.

How can I make a projection of an image (diaporama) with LabView?

Similar Messages

Maybe you are looking for