How can I make a pull down menu in I web

how can I make a pull down menu in I web?

You can't do this directly in iWeb itself and it is quite complex - you need to use third party software and it is a matter of pasting code into the html snippet in iWeb and then uploading certain things to your host/server and then connecting them. It can get quite fiddly if you don't really know what you are doing and it only takes you to upload the wrong thing and get some code wrong and your menu will not show up.
Why not ditch iWeb in favour of newer software - try EverWeb at http://www.everwebapp.com and in EverWeb you can create drop down menus from within the app and it is very easy to do.
I would change now as iWeb has not been supported by Apple or sold for the last 2 years, so now might be a good time to look elsewhere and ditch iWeb for good.
I already have and purchased EverWeb and re-built one of my sites using this app and have moved my other site to Drupal so that I can do more with it and make it a members site - this can be done more easily if you use a Content Management System like Drupal.

Similar Messages

Director 8 - how do I create a pull down menu

I have only been using Director for a short while and I am
trying to figure out how to create an interactive pull down menu.
There would be a title (click on title) then a series of Chapters
would show up under the title. By clicking on a chapter (or
releasing the mouse button) the viewer would be taken to the
beginning of that chapter. I have seen the pull down button in the
Library but have no idea on how to use it.

To use the Dropdown Menu behavior from the Controls pane of
the Library Palette:
1) Create a field member
2) Place it on the Stage
3) Open the Library Palette at the Controls pane
4) Drag the Dropdown Menu behavior onto the field sprite
5) Select the appropriate* choices in the Behavior Parameters
dialog
6) Run your movie
7) Click on the field sprite.
* What are the appropriate choices? That depends on how you
plan to design your project. You might like to start by creating a
marker label for each of your chapters, and using "Markers in this
movie" as the value for the "Contents" property.

How can I make invoice when down payment is bigger than item value ?

Dear all,
please, I need make invoice with bigger down payment than the item value.
How can I make invoice when down payment clearing value is bigger than the item value ?
When I do Release To Accounting, I have got a massage:
"Total of down payment to be billed too high. See billing document item XXXXX"
Please, how can I solve this problem?
Thank you
Peter

Hello,
I would like to underline that this is not a problem, but a standard, and in my opinion rightful behaviour of SAP: in a dowpayment process, when you create the invoice document, you should deduct only an amount less or equal to the invoice amount. And in the following invoices you will deduct the remaining downpayment amounts still open.
Also under al legal and fiscal point of view, I guess how would you print the invoice? With a minus value?
Best regards,
Andrea

Can you make a drop down menu in muse

can you make a drop down menu in muse

Yes, you can create main menu and sub menu items , with default menu the sub pages will auto create sub menu items (you should select all pages from menu type option).
These videos will help you :
https://www.youtube.com/watch?v=hncVlzYuuvQ
https://www.youtube.com/watch?v=kziCEqQpF9s
Thanks,
Sanjit

HT3576 nt work. how can i my notification pull down bar doesfix this?

my notification pull down bar does not work. how can i my notification pull down bar doesfix this?

Norton says they are going to update 360 in April for the Firefox 4.0.
You can get Firefox 3.6.16 here: <br />
http://www.mozilla.com/en-US/firefox/all-older.html
http://support.mozilla.com/en-US/kb/Installing+a+previous+version+of+Firefox

How can I get the drop down menu on the internet to work, which shows most visited websites? It was working on Firefox, and now doesn't.

On the internet when using Firefox, the drop down menu on recently visited sites (where you type in web addresses), does not work. How can I get it drop down and show websites that I recently visited, so I can click on them there instead of retyping them every time?

Make sure that the Location Bar is not set to "Nothing":
* Firefox (Tools) > Options > Privacy > Location Bar: When using the location bar, suggest: History, Bookmarks, History and Bookmarks
Another possible cause is a problem with the file places.sqlite that stores the bookmarks and the history.
*http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox

How can I locate the drop down menu to select thumbnails for viewing my photos?

I am using Microsoft Windows Vista. I select Files> Get photos and Videos> From Files and Folders. I select my photos and In my views I have a choice of different size icons, list, details and tiles. The icons are a flower image. When I select an image to view it only appears as an extra large icon on the middle right side of the moniter. I would like to view the thumbnail of the photo bfore I bring to my organizer. The drop down menu doesn't have a choice for thumbnail.

Perhaps I need to supply more details. I am using PSE9. I haven't any problem importing the images into the Organizer as I just select the Icons and select "Get Media" or "Open" and they transfer over to the Organizer. I would like to see the image as a thumbnail not an icon when when making the selection. If I right click them, the Icon, and select open they will open in "Windows Live Photo Gallery".
The icons are now listed on the left side of the monitor about the right middle it states "Select A File To Preview". When I select a file (icon) a large file (icon) appears in that area and it should be a thumbnail of the image. Somehow I can't locate the drop down menu taht permits me to make that selection. I think it has something to do with my files being able to open in Windows Live Photo Gallery when right clicking and select Open. Is the drop down menu only available in Windows 7?

How to deactivate the forms-pull-down menu?

Hi folks,
My problem is, that I can't deactivate the main pull down menu in the oracle forms runtime. There is allt the time leaving the "window" option.
Regards
Steffen

The windows option is a requierment of MS windows.
You can hide it by specifying a null label for the windows option

How can I create a drop down menu from an array

Hello all,
I am attempting to create a subvi that allows the end user to add a part number to an .txt file, and assigns that part number a value than can be used to select one of two modes of communication to be used to write to a EEPROM. I am using the "write key.vi" and the "read key.vi" to create and read the .txt file. What I would like to do is is use "get section names.vi" to read all of the part numbers and dump them into a drop down menu after the end user generates the file using the subvi.
I guess my question is how do I dump a 1D string array into a drop down menu.
I have attached some semi-functional .vi's to give an idea of what i am attempting to do.
Erik
Attachments:
FirsttryPN.vi ‏15 KB
PNwrite.vi ‏16 KB

Place a Ring control on your front panel, then create a property node on the block digram. You can wire the output array of "Get Section Names" to populate the Strings[ ] property of the Ring.
Retrieve the specific string selected by the operator by wiring the Ring control to the Index Array function.
Now is the right time to use %^<%Y-%m-%dT%H:%M:%S%3uZ>T
If you don't hate time zones, you're not a real programmer.
"You are what you don't automate"
Inplaceness is synonymous with insidiousness

How can i create a drop down menu for set qty in my store?

I'm wondering how i can create a drop down menu for the qty module that sits on the individual product page. My client sells in quantities of 6 packs. I currently have the minimum order at 6 but i would like to give consumers the option for 6,12,18...and so forth. I was told that it could be accomplished? Hopefully someone can help me.

Hi Chris -
Thank you for your reply! I had seen your article before, and just now again attempted to follow it, but I get stuck. There are two things that I'm confused by.
First off, toward the top, referring to the initial button, you say to add this interaction:
ON CLICK; Play Transition to comboBox: selected
ON ROLL OUT; Play Transition to comboBox normal if comboBox is in over state
ON ROLL OVER; Play Transition to comboBox over if comboBox is in normal
However, I do not see these transition options. When I select the button, the only interactions I have are to Play transistion to state, Play action sequence, Go to URL, and two for videos. So that's the first roadblock for me.
But, trying to get passed that, I went down to the portion of the article that refers to adding interaction to the dataset items. Again, I don't get it, as I see no way to add interaction to a dataset item. When I open my design-time data menu, I do see the items, and am able to rename each item, add additional rows, and change the shape of the datalist layout. However, I see no way to add an interaction to a dataset item. I must be missing a step ... Can you help with this?
Again, thank you!
Amy

How can you change a drop down menu's selection in a case statement?

Hi,
I am trying to an array finding vi. This VI will take an existing xml file and after the user has selected his/her equipment, input, output, and frequency it will put all of those options into a string and search the xml file for that exact array name and display it on an output screen. The problem I am having is that my input and outputs selection needs to be a little different depending upon the equipment selected. I thought that I could use a case statement to change the input and output selectable options, but I have run into many snags with it. For one everytime I place a new Input and Output drop down menu in the case statement it wants to place a new one in the front panel (I only want one input and output not three I have two inputs and outputs hidden right now). I believe I am using the case statement wrong... Can anyone help change my input and output selectable options depending upon the equipment selected. Attached is my xml file, Array Find.vi (the original one), and Array Find_Test.vi (this is the one I am trying to modify).
Thanks,
dlovell
Solved!
Go to Solution.
Attachments:
Find Array.zip ‏126 KB

Hi dlovell,
There are 2 key things I'd recommend for the code - using property nodes to edit the strings in the combo boxes. Something like the following snippet:
Also, check your CPU in task manager when running the code. It will eat a whole core of your machine (25% quad core, 50% dual, 100% single) - that is because you are running the while loop and polling the control as fast as Windows will allow you to. Using Event Structures is a much more efficient way of working in this example.
Check out the MOD attached
Regards,
Peter D
Attachments:
MOD_Find Array.vi ‏28 KB

How do I make a drop down menu selection show up in another web page?

What I am trying to accomplish is this. I have a page with various drop down menu selections that I want to transfer the selection to a secured web page. What happens now is once the selection is made it goes to the secure page but then the user has to again select the choice again. Is there way to keep the selection chosen in the linked page?

You can set the "selected" value in the second page based on the input from the first page.
Ignor the language referance used below for the example and simple use the concept with your desired language.
Second Page form:
<form id="form1" name="form1" method="post" action="">
<select name="testing" id="testing">
<option value="Value 1" <% if ( Passed values == Value 1 ) { %>selected="selected"<% } %>>Lable 1</option>
<option value="Value 2" <% if ( Passed values == Value 2 ) { %>selected="selected"<% } %>>Lable 2</option>
</select>

HT1349 How can I set up drop down menu in a cell of ipad2 numbers?

I want to set up drop down menu in a cell in numbers spreadsheet. Data validation in excel provides that. But what formula should I use in iPad2 numbers?
Thanks!

I dont think it can be done. This thing has been discussed somewhere and so far, no solution yet.

How can i get a drop down menu or check list control

i want to give the user a choice between 7 options on the front panel. i want either a check list or drop down menu.thanks

You can use any of the ring controls to generate a drop down list. The ring controls are found on the Controls >> Ring & Enum palette. You program the drop down items the same way with any of these controls. Type the first drop down item on the control. Right click on the control and select "add item after". The controls text field will blank out and you can enter your second item. Repeat for every item on the list you need to generate. After you are done entering items, click on the control with the application tool and you will see a drop down menu of all the items you entered.

Elements 9 - text, font family - how can I get the drop down menu to work?

I can't change the text fonts in Elements 9. Most everything else seems to work except the font family drop down menu. When I click on the arrow, the menu drops but immediately dissappears. The font size drop down works but not the family menu. Help please.

I think it's usually a restriction of short displays on netbooks and laptops etc. You may have to live with it unless you can change display resolution via the control panel.

How can I make a pull down menu in I web

Similar Messages

Maybe you are looking for