How can I make a second copy so I can make some changes, but lose the original document?

How can I make a copy of my new pdf convert to word document without losing the original document?

Hi mariponce,
Is it the Word document that you want to make a copy of, or the PDF? In either case, you can choose File > Save As (in the appropriate application), and give the file a new name. For example, if you have a file named "HappyTimes.docx," you could choose File > Save As, and name the file "HappyTimes2.docx." Then, you'll have two Word files, and you can edit one and leave the other intact.
Best,
Sara

Similar Messages

I've just found the keyboard shortcut in Garageband for 'copy region' had changed from cmdC to ctrlC. I went to Preferences and clicked Restore Defaults for shortcuts. Now its altC . How can I get it back to the original commands.

I've just found the keyboard shortcut in Garageband for 'copy region' had changed from cmdC to ctrlC. I went to Preferences and clicked Restore Defaults for shortcuts. Now its altC . How can I get it back to the original commands.

When I use find file http://www.macupdate.com/app/mac/30073/find-file (which does tend to find files that "Finder" can't), it's not coming up with any other itunes library files that have been modified in the past week, which I know it would have been - unfortunately, I don't have a very recent backup of the hard drive. It would be a few months old so it wouldn't have the complete library on it....any ideas? I'm wondering if restarting the computer might help but have been afraid to do so in case it would make it harder to recover anything...I was looking at this thread https://discussions.apple.com/thread/4211589?start=0&tstart=0 in the hopes that it might have a helpful suggestion but it's definitely a different scenario.

HT4901 I have HughesNet with a capped amount of Internet capacity. How can I use iCloud but adjust the time it is on to conserve my Internet allowance and not have to backup my information all the time????

I have HughesNet satellite for an ISP with a capped amount of Internet capacity. How can I use iCloud but adjust the time it is on to conserve my Internet allowance and not have to back up my information all the time?

Thanks Roger W1,
Yes, I was using iTunes to sync over cable without problems since orinigal purchase in 2011 and using 10.6 w/o problem. There was an "update" in Nov 2012 that crashed the sync service. I went to the Apple Store and reviewed the problem with the Geniuses there. It was discovered at that time that the update included mandated use of iCloud but enough of the un-updated code remained that he was able to patch functions to allow Microsoft Office to still sync over iTunes.
This March (+/-) there was another "update" to 10.6 that totally destroyed the patch that was in place so there was no sync service available between Microsoft and iTunes what-so-ever. Then recently, because of some unknown process, all my notes, contacts, and calendars were erased in both my Apple utilities and Microsoft utilities.
After many hours of frustration I was able to recover most of the information to the Apple utilities only, but those were unstable. At my visit to the Apple store it was suggested that an upgrade to 10.8 might solve the stability problem. That it did but being connected to the iCloud all the time keeps using up all my Internet time and I have nothing left to check emails or do research.
This, to me, is not my problem but one created by Apple. I have searched the Internet and support groups and there doesn't seem to be a solution.
The "aircraft mode" turns off all other communication functions and is not acceptable. Neither is disconnecting/turning off Airport on my MBP.
Thanks,
Jay

How can I open and listen to the PDF documents with audio in my iPad?

How can I open and listen to the PDF documents with audio in my iPad?

You need to use a PDF reader that supports multimedia. Adobe Reader 10.3 does not. Adobe has not stated whether it will support multimedia in the future.
In the meantime, you could buy an application that does like PDF Expert. Read about it here:
Finding the Best Tablet PDF Reader

Using the retouch tool, how do you make it change color? The old iPhoto one did, this one seems to be flesh-tone only, which is not how I need it to be. In old iPhoto, used the local color to blend, it was great.

Using the retouch tool, how do you make it change color? The old iPhoto one did, this one seems to be flesh-tone only, which is not how I need it to be. In old iPhoto, used the local color to blend, it was great.

I don't know which old version you're referring to but iPhoto 6's, 7's and 8's retouch tool works exactly the same as iPhoto 9's. The color of the enhance tool's area while applying is a light brown color but the retouch works on any color using the surrounding colors as a basis.
During retouching:
After retouching:
OT

Hey, im really sick of this, how can i open folders but in the same windows, when i open a folder which is inside of another one, it just open me a new window, its so annoying, could anyone tell me what to do? im using mac os 10.7.2

hey, im really sick of this, how can i open folders but in the same windows, when i open a folder which is inside of another one, it just open me a new window, its so annoying, could anyone tell me what to do? im using mac os 10.7.2

Finder > Preferences > General > Always open folders in a new window: uncheck

Hie guys..how can i activate my iphone without the original sim card coz it says SIM not valid if i insert it.....im in south africa thanks for your help

hie guys..how can i activate my iphone without the original sim card coz it says SIM not valid if i insert it.....im in south africa thanks for your help

Sorry, you can't. If your phone is carrier locked, you will need a sim card from that carrier, to activate it.

How can I activate my iPhone without the original sim

how can I activate my iPhone without the original sim

If using a phone locked to a carrier, you must have the original SIM or one from that carrier to activate your iPhone.

How can FRT be backordered but not the phone ???

So I ordered my iPhone through direct fullfillment on 7/19. This morning (7/28) I checked the status of my order, and it showed that the phone is no longer back-ordered but the FRT is. From what I understand, the FRT is the shipping. How can that be back-ordered if the phone isn't any longer.
Do you think this means my phone will ship soon ?

Well yes I guess an AT&T forum would probably be the best for this question.
I have seen many other board members though QUESTION, GRIPE, & COMPLAIN about their woes of trying to actually get their iPhone. I figured this is like one big family, your allowed to complain about things slightly off topic to get some answers.

How can I import a photo at the original size into a book page without iPhoto stretching it out?

I have photos that are different sizes but cannot be cropped or stretched or the whole image can't be seen. Is there a way to import photos without ibook manipulating them?
Also, How does one make a PDF of the book?
Matthew

Are you talking about iBooks Author? To make a PDF: File > Export or Share > Email PDF
To constrain an image open metrics inspector and select constrain proportions.
I just downloaded the programme and had a quick squiz of the Help menu.

My pc broke, and now i need to trnsfer again to itune, how can i do this without lose the info

My pc were broken, and now i want to sincronize again my ipod, but i don´t want to lose the info that i have it, how can i do?????

you have a new iphone and an old iphone right? take both to your cellular provider and tell them you need back up assistance on your new phone to get your contacts. Make sure to bring both phones

Need to open .fcp project from FCP7 in FCPX 10.0.3. How can I achieve this without exporting the original from FCP7 to a QT movie? I need the original timeline in FCPX.

I have been working on a scholarship short film for a couple of months now (am a senior in high school) and have been using my school's Mac Pros with OSX 10.7 and FCP7 to edit it. Yesterday I bought a Macbook Pro and got FCPX, and am having trouble moving everything over (the computers at school are going to be wiped for the end of the year soon and I must continue to edit it on my MacBook). The project file "MattsShort.fcp" from FCP7 at school isn't even being recognized as a project file by the newest version of FCPX, so obviously I cannot open it and get to work connecting the media. How can I open this file in FCPX? Excluding exporting the project at school to a quicktime movie, I need to be able to further edit the timeline.

Cool, thanks! I was able to import the timeline into FCPX but all of the files are offline, even though I imported the same exact clips that were in the original FCP7 project, into the same 'event' that I have the new FCPX timeline in. I believe the problem lies in that FCPX imported the clips and named them after the date and time they were created, rather than the "Clip #XXX" that FCP7 assigned to the timeline. Does this sound correct? And if so, is the only way to solve this problem to go back to FCP7 and rename all of the clips assigned to the timeline to the names FCPX gave them? I really hope there is a simpler solution but given all of the work it takes to even import a FCP7 project into FCPX, I wouldn't be surprised if that was the only solution.
A little more info: When I use 7toX to convert the XML file, it says that my media will be offline.
EDIT: I just watched a youtube video that explained that 7toX brings over the required media.....why isn't it doing that for me? I am on two different computers if I hadn't already said.
Message was edited by: MattMadoni

When i cropped a picture using the crop tool to 9x6" when it was printed everyone was stretched looking tall and thiner how can i crop pictures but keep the people looking as they do in real life?

oops put the while question in the wrong place!!! but I'm at a loss on how to do this every picture I took everyone looks stretched when I use the crop tool any help would be much appreciated,
I have PS6
thank you

suzukidi wrote:
I have been trying so hard to try and get my head round this since your last comment so what I think I know is with my Nikon d80 having 3:2 aspect ratio pictures that I wanted printed can only be the sizes you mentioned above which is fine as the pictures I got printed were 9x6" but it's from now I'm still bit lost when I use the crop tool and pre set the size to 9x6" with a resolution of 240 and crop out all the bits I don't want it comes back from printers stretched so i'm still lost as I don't know the point where I'm doing something that causes the stretching? thank you for your patience
Lets separate this into topics Aspect Ratio, resolution and size ... etc
Aspect Ratio is just the ratio of an image's two sides. Your camera captures an image with a 3:2 Aspect Ratio. If you want to print the whole image your camera captures it can be printed and image size that has sides the have a 3:2 ratio without distorting the image.
Images are re-sized two ways:
One way is to keep the pixels your camera captures and print them at different resolutions. Resolution is nothing more then pixel size. Pixels have no size till there is a resolution set. Pixels themselves may have a aspect ratio themselves. These days most devices use square pixel. Some video standards use non square pixels. So if you have square pixels and an image with 1800px by 1200px and set the resolution to 300DPI the print size will be 6" by 4" if you set the to 200DPI the print size will be 9" by 6". Its simple math. 300DPI means pixels are 1/300"x1/300" there are 90,000px/inch 200DPI 1/200"x1/200" 40,000px/inch 100DPI 1/100"x1/100" 10,000. Note how quickly the pixel count climes as resolution increase doubling an image resolution requires four times as many pixels not two timas as many.
The other way is to create a new image using the pixels you camera captures. Your Camera pixels are resampled(interpolated) into a totally new image not a single camera captured pixel remains intact the new image has a different numbers of pixels it a different image. There are different interpolation methods some work better then others depending on image content and the direction of the re-size. Any time you resample an image you loose some image quality. The pixels are generated they are not captured using optics and a sensor.
Normally I do not resample when printing I just set the DPI so the image prints the size I want. In the Image size Dialog I un-check resample and the set the print width or height I want to print. Photoshop will calculate the DPI and set the other side size. If you crop without setting a DPI resolution in the crop tool the crop tool will not resample the crop to a particular DPI it should just set the appropriate DPI.
I resample image for the web Cameras capture more pixels then can be display by displays. So in the image size dialog I check resample and constrain the width and height to the image current aspect ratio then I set the number of pixels I want the width or height to be. Photoshop will calculate the number of pixels the other side will be. The DPI is meaningless for web images for Web images are displayed on screens at the resolution a displays has. Your images will display large on a large Low DPI resolution HDTV screen and small on a high resolution cell phone display.
If you want to print you image a size that does not have a 3:2 aspect ratio without distortion you need to crop you image to the aspect ratio you want to print at. You need to discard part of your image. The Crop Tool does not distort it discards part of you image. It may or may not resample the crop selected. I do not use the crop tool but if I did I would not use it to resample the crop I would not set in a DPI resolution in the crop tool.
Photoshop can also resize an image from one aspect ratio to and other aspect ratio a non constrained resize. The resulting image will be distorted. However Photoshop does have have a content aware re-size that tries to maintain recognizable objects perspective during the distortion process. This process can also be aided by user masking.
Cropping:
A 3:2 aspect ratio image can in theory be cropped to an infinite number of smaller images that have any aspect ratios including an infinite number of images that have a 3:2 aspect ratio. All crops can be resampled to a particular DPI resolution. However digital pixels can not be sliced up so there are a finite numbers of crops you can hack form a digital image

How can I reactivate my iPad without the original apple-id?

Hello Community,
I bought my iPad (3rd gen) two years ago (64GB WiFi Cellular).
After using it for a year i gave it to the son of a friend for some some month to use.
When I got it back, it was locked and the boy forgot the code. So we did a reset to factory defaults.
Now the iPad asks to be activated again with the apple id of the boy.
The problem is: He has no access to his apple id anymore. He cant remember his apple id, his apple id password nor the password he used for the mail account for the apple-id. He doesn't use them anymore. We tried to reset the apple id, but it didn't work.
How can i reactivate my deleted iPad without the original apple-id that was used to lock/link/configure it?
Any help appreciated

You're in a tough spot. Activation lock was enabled on your iPad, so without the unknown ID's you won't be able to reactivate the iPad. You're only option is to take the iPad to an Apple Store Genius Bar and maybe it's possible if you prove you are the original owner of the iPad, they'll help you. If you can't prove you are the original owner, you're really out of luck.

How can I insert an image at the original resolution into a PDF using Acrobat Pro XI

Got an image created in Photoshop at 300DPI 2480 pixels wide by xx high. Saved as a TIFF.
When I insert that image in my PDF (A4 210mm x 297mm) using Acrobat Pro XI via "Content Editing->Add Image" it appears smaller than the page width of the PDF, and I must manually resize the inserted image by dragging with my mouse.
Documentation says the image is inserted at the original image resolution, but it doesn't seem to be the case.
Also tried creating another image in Photoshop using 210mm width @ 300 DPI (instead of 2480 pixels @ 300DPI), got the same results.
Can anyone help? Cheers.

You should maybe take a step back. Nobody composes pages in Acrobat.

How can I make a second copy so I can make some changes, but lose the original document?

Similar Messages

Maybe you are looking for