How can I make a Splitting in Cost center accounting by Cost elements?

Hi experts:
I have defined a splitting structure and I would like to split the cost bettew fixed and variables cost.
To to that I have defined two different assignments and in the selection for each assignment I have completed the "Field label" with:
In the first assigment I would like to have only the "fixed cost" and I did the next:
1. Cost element (I have entered a Group) the cost which is in this cost element group is 4.000.0000 euros
2.- Activity type (I have entered a Individual value)
In the second assignment I did the same but with a different Cost element group (the original amount was 6.000.000 euros
The problem is that when I have executed the transaction to do the split, the system split the 50% of the total cost (10.000.000 euros) to each assignment.
How can I make if I want that the system split the cost based only in the "cost element group" which are defined one of them for the "Fixed cost" and the another one for "Variable cost"??
Are there any method which can split a total Cost for a Cost center based only in the cost amount for a cost element group??
Thanks a regards!!
Manuel

sry. im not from the united states, and I never think to spell when posting on forums
Your site's customers will think of it, and they will regard such errors as the mark of a sloppy vendor, not a sloppy webmaster. And I'm not sure what being from the US has to do with anything.
I want to position the container in the center while having absolute positioning, is that possible?
I have doubts, I've seen a lot of people saying that u can't center a container with aboslute position.
Then you should remove those people from your circle of trust. Of course it's possible.
Make the container relatively positioned, and centering with an explicit width and auto left/right margins. The inner absolutely positioned elements will center along with their positioned ancestor.

Similar Messages

How can I make a catalog avaiable for all accounts on a laptop?

At the moment the PSE11 (windows-version) catalog is saved in my pictures folder. Because my wife also uses the laptop (with Win 8.1) I now want to move the catalog from my private folder to a public folder on the laptop that is accessible for both accounts.
1 Question: how can I move the catalog?
2. After moving: are both accounts able to access the catalog with PSE11?
3. After moving the catalog: do I need to move the folder with the pictures too (i suppose: yes)?
Any hints much appreciated.

The inability to merge accounts has been around since they first started using Apple IDs. An issue almost ten years in the making, that one.
What I did was just use my Apple ID for my iTunes purchases and create the @me.com address to go with it. However, you can sign in with both on your devices to use one for your email and sycning and the other for purchases.
Apple did include this article for us in that department: http://support.apple.com/kb/HT4895

How can I make Skype appear in notification Center

Hi, I use Skype a lot, is there someway I can make my Skype notifications appear in notification Center, Thanks.

If the app supports Notification Center it will show up automatically. Try updating Skype and after the update has installed, resart the mac.
If it still doesn't show up in NC, then it doesn't support Notifications.

How can I make QT open movies in center of screen?

I have a 32 inch monitor. When I double click a quicktime movie file, it always opens in the far upper left corner of my screen. Difficult and awkward for viewing. I then have to drag it to the center where it is easier to view. There must be a way to make QT stop defaulting to the upper left, and instead open in the center of the screen. No? Any help, please. Thanks.

Wouldn't it be a useful option in tools->options->tabs to open new tabs at end? That way people can easily choose whatever their working preference is - mine is "at end" as it keep the tabs I'm going to get around to away from the ones I'm working on right now.
A check-box would be much simpler for the general user than hitting the "here there be dragons" area with all the potential pitfalls that lurk there.

How can I make a folder structure for both PSE and Premiere Elements?

I have recently bought bundled PSE 10 and Prem Elements 10 ... (but have been using PSE6 for years)
I have lots of jpeg photos on an external drive in folders with a heirarchical structure eg. Pictures ... Friends ... 2011 ... 2011_12_02_Margate_seagulls.jpg I also have loads of photos that are simply there waiting to be sorted and are in their native format e.g PIC_6120.jpg Additionally I have .MOV files dumped from my JVC standard def camera some of which are custom named, others are left as is. I now own a hi-def lumix which takes great jpgs and also video MTS files. After lots of searching on the net for the best way to get all this organised I am at a standstill. I feel that I need an external folder system (ie one that does not rely 100% on adobe and its categotries and tags) because I have had catastropic losses when using earlier photoshop progs. I also see the benefit of using tags. So...
Is there a simple (and best) way to order my photos and hi-def video while taking into account content I already have shot/videod? I am happy to hear reasons and see examples why I should trust PSE/Prem E - but I would also like to see if it makes sense to use folders. Ideally i would love a practical folder structuring method that incorporates both video and still content. I have posted here because it is important I organise my video better and have a flexible system that allows for drafts and reworking my Hi-def content.
I have tried to find the info but it is so piecemeal and I have faith in the people on here ... Any links and advice would be much appreciated

In generic terms there are three methods of filing just about anything:
Structured by event
Structured by type
Unstructured
Event might be occasion or date or a specific project. For this type of structure you would store all your assets related to that event, regardless of whether it is still, image or audio, in one place.
Type would typically be by the type of asset. All your videos in one place, stills in another, audio in another etc... In business for example in the eighties (when personal computing became prevalent in the workplace) staff would religiously have all their word processor documents in one place, spreadsheets in another, powerpoints in yet another etc.... Dreadfully inefficient.
Unstructured would be a case of storing things wherever you liked and accessing them via tags or albums - but you've said you want to avoid this.
Personally I let the application store things according to the defaults for the different import types but then tag them. Essentially I follow the 'unstructured' style. For anything major I create a project directory and move all the project assets into it (i.e. selective structure by event).
If you search the Tips & Tricks forum I think Bill Hunt (who does this stuff for a living) describes his structured folder flow in great detail.
Cheers,
Neale
Insanity is hereditary, you get it from your children

How can I make my tags applied to BOTH of my email accounts?

My first email account was with comcast.net; I generated a number of tags and all are applied to incoming messages as desired. I later added my gmail.com account and none of the tags are applied to any of the incoming mail.
How can I make the tags work for BOTH accounts?
Thanks in advance.

Read the user manual that came with your camera or contact the vendor. My camera asks me where I want my uploads to go to. There is a setting in its option menu. Desktop is the default upload feature that my camera has.
When I connect the memory card to a reader, the photos automatically upload to my desktop.

Nokia C3 How can I make sure it only connects thro...

Ive just got this phone for my daughter on Vodaphone contract, I am really worried however that it is going to randomly connect itself to the internet like my old Nokia 5800 used to! How can I make sure it doesn't, I don't want it to end up costing me a fortune. Many thanks

Only the website (server or domain) that sets a cookie can read that cookie, but there can be an iframe embedded with a different domain that sets so called third-party cookies.
You can disable third-party cookies.
*https://support.mozilla.org/kb/Disabling+third+party+cookies

How can I make a call from iPad

How can I make a call from IPad

Oh, you have to get the iPhone app.
Seriously, though .... you are aware that it's not a telephone, right? Any calls you make will be using VOIP and any of the apps and/or services (Skype, Google Talk, etc., etc.) which support that. Some of those are US-only, all have various restrictions and cost structures.

How can i make the optimiser to skip this full table scan ??

Hi,
I am trying to tune the below query, I have checked up all the possibilities to skip the full table scan on vhd_calldesh_archive, But am unable to find the predicate in the where clause, which is letting the optimiser to choose the full table scan on vhd_calldesk_archive table, which is very large one. how can i make the optimiser to skip this full table scan.
Please check the below sql script and explain plan ,
SELECT a.call_id, a.entry_date,
NVL (INITCAP (b.full_name), caller_name) AS caller_name,
c.description AS org_desc, a.env_id, i.env_desc, a.appl_id,
d.appl_desc, a.module_id, e.module_desc, a.call_type_id,
f.call_type_desc, a.priority, a.upduserid,
INITCAP (g.full_name) AS lastupdated_username, a.call_desc, h.mode_desc,
a.received_time,a.assignment_team, a.status,
ROUND (lcc.pkg_com.fn_datediff ('MI',
a.entry_date,
a.status_date
) AS elapsed_time,
ROUND (lcc.pkg_com.fn_datediff ('MI',
a.entry_date,
a.status_date
) AS resolved_min,
CASE
WHEN a.orgid in (1,100,200) THEN a.orgid
ELSE j.regionorgid
END AS region
,(SELECT coalesce(MAX(upddate),a.upddate) FROM lcc.vhd_callstatus stat WHERE stat.call_id = a.call_id
) as stat_upddate
,(SELECT team_desc from lcc.vhd_teams t where t.team_id = a.assignment_team) as team_desc
,a.eta_date
,coalesce(a.caller_contact, b.telephone) AS caller_contact
,coalesce(a.caller_email, b.email) as email
,a.affected_users
,a.outage_time
,a.QA_DONE
,a.LAST_ACTION_TEAM
,a.LAST_ACTION_USER
,INITCAP (k.full_name) AS last_action_username
,a.last_action_date
,l.team_desc as last_action_teamdesc
,a.refid
,INITCAP (lu.full_name) AS logged_name
,a.pmreview
,a.status as main_status
FROM lcc.vhd_calldesk_archive a
LEFT OUTER JOIN lcc.lcc_userinfo_details b ON b.user_name = a.caller_id
INNER JOIN lcc.com_organization c ON c.code = a.orgid
INNER JOIN lcc.vhd_applications d ON d.appl_id = a.appl_id
INNER JOIN lcc.vhd_modules e ON e.appl_id = a.appl_id AND e.module_id = a.module_id
INNER JOIN lcc.vhd_calltypes f ON f.call_type_id = a.call_type_id
INNER JOIN lcc.com_rptorganization j ON j.orgid = a.orgid AND j.tree = 'HLPDK'
LEFT OUTER JOIN lcc.lcc_userinfo_details g ON g.user_name = a.upduserid
LEFT OUTER JOIN lcc.vhd_callmode h ON h.mode_id = a.mode_id
LEFT OUTER JOIN lcc.vhd_environment i ON i.appl_id = a.appl_id AND i.env_id = a.env_id
LEFT OUTER JOIN lcc.lcc_userinfo_details k ON k.user_name = a.last_action_user
LEFT OUTER JOIN lcc.vhd_teams l ON l.team_id = a.last_action_user
LEFT OUTER JOIN (select CALL_ID,upduserid FROM lcc.VHD_CALLDESK_HISTORY P where upddate
in ( select min(upddate) from lcc.VHD_CALLDESK_HISTORY Q WHERE Q.CALL_ID = P.CALL_ID
group by call_id)) ku
ON ku.call_id = a.call_id
LEFT OUTER JOIN lcc.lcc_userinfo_details lu ON NVL(ku.upduserid,A.upduserid) = lu.user_name;
| Id | Operation | Name | Rows | Bytes | Cost |
| 0 | SELECT STATEMENT | | 2104 | 3667K| 37696 |
| 1 | UNION-ALL | | | | |
| 2 | NESTED LOOPS OUTER | | 2103 | 3665K| 37683 |
| 3 | VIEW | | 2103 | 3616K| 35580 |
| 4 | NESTED LOOPS OUTER | | 2103 | 823K| 35580 |
| 5 | NESTED LOOPS OUTER | | 2103 | 774K| 33477 |
| 6 | NESTED LOOPS OUTER | | 2103 | 685K| 31374 |
| 7 | NESTED LOOPS | | 2103 | 636K| 29271 |
| 8 | NESTED LOOPS | | 2103 | 603K| 27168 |
| 9 | NESTED LOOPS OUTER | | 2103 | 558K| 25065 |
| 10 | NESTED LOOPS OUTER | | 2103 | 515K| 22962 |
| 11 | NESTED LOOPS | | 2103 | 472K| 20859 |
| 12 | NESTED LOOPS | | 2103 | 429K| 18756 |
| 13 | NESTED LOOPS OUTER | | 4826 | 890K| 13930 |
| 14 | NESTED LOOPS OUTER | | 4826 | 848K| 9104 |
| 15 | NESTED LOOPS | | 4826 | 754K| 4278 |
|* 16 | TABLE ACCESS FULL | COM_RPTORGANIZATION | 75 | 1050 | 3 |
| 17 | TABLE ACCESS BY INDEX ROWID | VHD_CALLDESK | 64 | 9344 | 57 |
|* 18 | INDEX RANGE SCAN | VHD_CALLDSK_ORGID | 2476 | | 7 |
| 19 | VIEW PUSHED PREDICATE | | 1 | 20 | 1 |
|* 20 | FILTER | | | | |
| 21 | TABLE ACCESS BY INDEX ROWID | VHD_CALLDESK_HISTORY | 1 | 20 | 2 |
|* 22 | INDEX RANGE SCAN | VHD_CALLDSK_HIST_CALLID_IDX | 1 | | 1 |
|* 23 | FILTER | | | | |
| 24 | SORT GROUP BY NOSORT | | 1 | 12 | 2 |
| 25 | TABLE ACCESS BY INDEX ROWID | VHD_CALLDESK_HISTORY | 1 | 12 | 2 |
|* 26 | INDEX RANGE SCAN | VHD_CALLDSK_HIST_CALLID_IDX | 1 | | 1 |
| 27 | TABLE ACCESS BY INDEX ROWID | VHD_CALLMODE | 1 | 9 | 1 |
|* 28 | INDEX UNIQUE SCAN | VHD_CALLMOD_MODID_PK | 1 | | |
| 29 | TABLE ACCESS BY INDEX ROWID | VHD_APPLICATIONS | 1 | 20 | 1 |
|* 30 | INDEX UNIQUE SCAN | VHD_APPL_APPLID_PK | 1 | | |
| 31 | TABLE ACCESS BY INDEX ROWID | VHD_CALLTYPES | 1 | 21 | 1 |
|* 32 | INDEX UNIQUE SCAN | VHD_CALLTYP_ID_PK | 1 | | |
| 33 | TABLE ACCESS BY INDEX ROWID | VHD_TEAMS | 1 | 21 | 1 |
|* 34 | INDEX UNIQUE SCAN | VHD_TEAMID_PK | 1 | | |
| 35 | TABLE ACCESS BY INDEX ROWID | VHD_ENVIRONMENT | 1 | 21 | 1 |
|* 36 | INDEX UNIQUE SCAN | VHD_ENV_APLENVID_PK | 1 | | |
| 37 | TABLE ACCESS BY INDEX ROWID | VHD_MODULES | 1 | 22 | 1 |
|* 38 | INDEX UNIQUE SCAN | VHD_MOD_APLMOD_ID_PK | 1 | | |
| 39 | TABLE ACCESS BY INDEX ROWID | COM_ORGANIZATION | 1 | 16 | 1 |
|* 40 | INDEX UNIQUE SCAN | COM_ORG_PK | 1 | | |
| 41 | TABLE ACCESS BY INDEX ROWID | LCC_USERINFO_DETAILS | 1 | 24 |
|* 42 | INDEX UNIQUE SCAN | LCCUSERINFOIND | 1 | | |
| 43 | TABLE ACCESS BY INDEX ROWID | LCC_USERINFO_DETAILS | 1 | 43 |
|* 44 | INDEX UNIQUE SCAN | LCCUSERINFOIND | 1 | | |
| 45 | TABLE ACCESS BY INDEX ROWID | LCC_USERINFO_DETAILS | 1 | 24 | 1
|* 46 | INDEX UNIQUE SCAN | LCCUSERINFOIND | 1 | | |
| 47 | TABLE ACCESS BY INDEX ROWID | LCC_USERINFO_DETAILS | 1 | 24 | 1
|* 48 | INDEX UNIQUE SCAN | LCCUSERINFOIND | 1 | | |
| 49 | NESTED LOOPS OUTER | | 1 | 1785 | 13 |
| 50 | VIEW | | 1 | 1761 | 12 |
| 51 | NESTED LOOPS OUTER | | 1 | 1656 | 12 |
| 52 | NESTED LOOPS OUTER | | 1 | 1632 | 11 |
| 53 | NESTED LOOPS OUTER | | 1 | 1608 | 10 |
| 54 | NESTED LOOPS | | 1 | 1565 | 9 |
| 55 | NESTED LOOPS | | 1 | 1549 | 9 |
| 56 | NESTED LOOPS | | 1 | 1535 | 9 |
| 57 | NESTED LOOPS OUTER | | 1 | 1513 | 8 |
| 58 | NESTED LOOPS OUTER | | 1 | 1492 | 7 |
| 59 | NESTED LOOPS | | 1 | 1471 | 6 |
| 60 | NESTED LOOPS | | 1 | 1450 | 5 |
| 61 | NESTED LOOPS OUTER | | 1 | 1430 | 4 |
| 62 | NESTED LOOPS OUTER | | 1 | 1421 | 3 |
| 63 | TABLE ACCESS FULL | VHD_CALLDESK_ARCHIVE | 1 | 1401 | 2 |
| 64 | VIEW PUSHED PREDICATE | | 1 | 20 | 1 |
|* 65 | FILTER | | | | |
| 66 | TABLE ACCESS BY INDEX ROWID | VHD_CALLDESK_HISTORY | 1 | 20 | 2 |
|* 67 | INDEX RANGE SCAN | VHD_CALLDSK_HIST_CALLID_IDX | 1 | | 1 |
|* 68 | FILTER | | | | |
| 69 | SORT GROUP BY NOSORT | | 1 | 12 | 2 |
| 70 | TABLE ACCESS BY INDEX ROWID| VHD_CALLDESK_HISTORY | 1 | 12 | 2 |
|* 71 | INDEX RANGE SCAN | VHD_CALLDSK_HIST_CALLID_IDX | 1 | | 1 |
| 72 | TABLE ACCESS BY INDEX ROWID | VHD_CALLMODE | 1 | 9 | 1 |
|* 73 | INDEX UNIQUE SCAN | VHD_CALLMOD_MODID_PK | 1 | | |
| 74 | TABLE ACCESS BY INDEX ROWID | VHD_APPLICATIONS | 1 | 20 | 1 |
|* 75 | INDEX UNIQUE SCAN | VHD_APPL_APPLID_PK | 1 | | |
| 76 | TABLE ACCESS BY INDEX ROWID | VHD_CALLTYPES | 1 | 21 | 1 |
|* 77 | INDEX UNIQUE SCAN | VHD_CALLTYP_ID_PK | 1 | | |
| 78 | TABLE ACCESS BY INDEX ROWID | VHD_TEAMS | 1 | 21 | 1 |
|* 79 | INDEX UNIQUE SCAN | VHD_TEAMID_PK | 1 | | |
| 80 | TABLE ACCESS BY INDEX ROWID | VHD_ENVIRONMENT | 1 | 21 | 1 |
|* 81 | INDEX UNIQUE SCAN | VHD_ENV_APLENVID_PK | 1 | | |
| 82 | TABLE ACCESS BY INDEX ROWID | VHD_MODULES | 1 | 22 | 1 |
|* 83 | INDEX UNIQUE SCAN | VHD_MOD_APLMOD_ID_PK | 1 | | |
| 84 | TABLE ACCESS BY INDEX ROWID | COM_RPTORGANIZATION | 1 | 14 | |
|* 85 | INDEX UNIQUE SCAN | COM_RPTORG_PK | 1 | | |
| 86 | TABLE ACCESS BY INDEX ROWID | COM_ORGANIZATION | 1 | 16 | |
|* 87 | INDEX UNIQUE SCAN | COM_ORG_PK | 1 | | |
| 88 | TABLE ACCESS BY INDEX ROWID | LCC_USERINFO_DETAILS | 1 | 43 |
|* 89 | INDEX UNIQUE SCAN | LCCUSERINFOIND | 1 | | |
| 90 | TABLE ACCESS BY INDEX ROWID | LCC_USERINFO_DETAILS | 1 | 24 |
|* 91 | INDEX UNIQUE SCAN | LCCUSERINFOIND | 1 | | |
| 92 | TABLE ACCESS BY INDEX ROWID | LCC_USERINFO_DETAILS | 1 | 24 | 1
|* 93 | INDEX UNIQUE SCAN | LCCUSERINFOIND | 1 | | |
| 94 | TABLE ACCESS BY INDEX ROWID | LCC_USERINFO_DETAILS | 1 | 24 | 1
|* 95 | INDEX UNIQUE SCAN | LCCUSERINFOIND | 1 | | |
Predicate Information (identified by operation id):
16 - filter("J"."TREE"='HLPDK')
18 - access("J"."ORGID"="A"."ORGID")
20 - filter( EXISTS (SELECT /*+ */ 0 FROM "LCC"."VHD_CALLDESK_HISTORY" "Q" WHERE "Q"."CALL_ID"=:B1
"Q"."CALL_ID" HAVING MIN("Q"."UPDDATE")=:B2))
22 - access("SYS_ALIAS_2"."CALL_ID"="A"."CALL_ID")
23 - filter(MIN("Q"."UPDDATE")=:B1)
26 - access("Q"."CALL_ID"=:B1)
28 - access("H"."MODE_ID"(+)="A"."MODE_ID")
30 - access("D"."APPL_ID"="A"."APPL_ID")
32 - access("F"."CALL_TYPE_ID"="A"."CALL_TYPE_ID")
34 - access("L"."TEAM_ID"(+)="A"."LAST_ACTION_TEAM")
36 - access("I"."APPL_ID"(+)="A"."APPL_ID" AND "I"."ENV_ID"(+)="A"."ENV_ID")
38 - access("E"."APPL_ID"="A"."APPL_ID" AND "E"."MODULE_ID"="A"."MODULE_ID")
40 - access("C"."CODE"="A"."ORGID")
42 - access("K"."USER_NAME"(+)="A"."LAST_ACTION_USER")
44 - access("B"."USER_NAME"(+)="A"."CALLER_ID")
46 - access("G"."USER_NAME"(+)="A"."UPDUSERID")
48 - access("LU"."USER_NAME"(+)=NVL("SYS_ALIAS_4"."UPDUSERID_162","SYS_ALIAS_4"."UPDUSERID_25"))
65 - filter( EXISTS (SELECT /*+ */ 0 FROM "LCC"."VHD_CALLDESK_HISTORY" "Q" WHERE "Q"."CALL_ID"=:B1
"Q"."CALL_ID" HAVING MIN("Q"."UPDDATE")=:B2))
67 - access("SYS_ALIAS_2"."CALL_ID"="SYS_ALIAS_1"."CALL_ID")
68 - filter(MIN("Q"."UPDDATE")=:B1)
71 - access("Q"."CALL_ID"=:B1)
73 - access("H"."MODE_ID"(+)="SYS_ALIAS_1"."MODE_ID")
75 - access("D"."APPL_ID"="SYS_ALIAS_1"."APPL_ID")
77 - access("F"."CALL_TYPE_ID"="SYS_ALIAS_1"."CALL_TYPE_ID")
79 - access("L"."TEAM_ID"(+)=TO_NUMBER("SYS_ALIAS_1"."LAST_ACTION_USER"))
81 - access("I"."APPL_ID"(+)="SYS_ALIAS_1"."APPL_ID" AND "I"."ENV_ID"(+)="SYS_ALIAS_1"."ENV_ID")
83 - access("E"."APPL_ID"="SYS_ALIAS_1"."APPL_ID" AND "E"."MODULE_ID"="SYS_ALIAS_1"."MODULE_ID")
85 - access("SYS_ALIAS_1"."ORGID"="J"."ORGID" AND "J"."TREE"='HLPDK')
87 - access("C"."CODE"="SYS_ALIAS_1"."ORGID")
89 - access("B"."USER_NAME"(+)="SYS_ALIAS_1"."CALLER_ID")
91 - access("SYS_ALIAS_1"."UPDUSERID"="G"."USER_NAME"(+))
93 - access("K"."USER_NAME"(+)="SYS_ALIAS_1"."LAST_ACTION_USER")
95 - access("LU"."USER_NAME"(+)=NVL("SYS_ALIAS_3"."UPDUSERID_162","SYS_ALIAS_3"."UPDUSERID_25"))
Note: cpu costing is off

I've tried to look thru your sql and changed it a bit. Of course not testet :-)
Your problem isn't the archive table! I tried to remove the 2 selects from the select-clause. Furthermore you have a lot of nested loops in your explain, which is a performance-killer. Try getting rid of them, perhaps use /*+ USE_HASH(?,?) */.
SELECT a.call_id, a.entry_date,
       NVL (INITCAP (b.full_name), caller_name) AS caller_name, c.description AS org_desc, a.env_id, i.env_desc, a.appl_id,
       d.appl_desc, a.module_id, e.module_desc, a.call_type_id, f.call_type_desc, a.priority, a.upduserid,
       INITCAP (g.full_name) AS lastupdated_username, a.call_desc, h.mode_desc, a.received_time, a.assignment_team, a.status,
       ROUND (lcc.pkg_com.fn_datediff ('MI', a.entry_date, a.status_date)) AS elapsed_time,
       ROUND (lcc.pkg_com.fn_datediff ('MI', a.entry_date, a.status_date)) AS resolved_min,
       CASE
          WHEN a.orgid IN (1, 100, 200)
             THEN a.orgid
          ELSE j.regionorgid
       END AS region,
       COALESCE (stat.upddate, a.upddate) AS stat_upddate,
       t.team_desc, a.eta_date,
       COALESCE (a.caller_contact, b.telephone) AS caller_contact,
       COALESCE (a.caller_email, b.email) AS email, a.affected_users,
       a.outage_time, a.qa_done, a.last_action_team, a.last_action_user,
       INITCAP (k.full_name) AS last_action_username, a.last_action_date,
       l.team_desc AS last_action_teamdesc, a.refid,
       INITCAP (lu.full_name) AS logged_name, a.pmreview,
       a.status AS main_status
FROM lcc.vhd_calldesk_archive a, lcc.lcc_userinfo_details b, lcc.com_organization c,
       lcc.vhd_applications d, lcc.vhd_modules e, lcc.vhd_calltypes f, lcc.com_rptorganization j,
       lcc.lcc_userinfo_details g, lcc.vhd_callmode h, lcc.vhd_environment i, lcc.lcc_userinfo_details k,
       lcc.vhd_teams l,
      (SELECT call_id, upduserid
       FROM lcc.vhd_calldesk_history p
       WHERE upddate IN (SELECT   MIN (upddate)
                         FROM lcc.vhd_calldesk_history q
                         WHERE q.call_id = p.call_id
                         GROUP BY call_id)) ku,
       lcc.lcc_userinfo_details lu,
      (SELECT call_id, MAX (upddate)
       FROM lcc.vhd_callstatus
       GROUP BY call_id) stat,
       lcc.vhd_teams t
WHERE a.caller_id        = b.user_name(+)
    AND a.orgid            = c.code
    AND a.appl_id          = d.appl_id
    AND a.appl_id          = e.appl_id
    AND a.module_id        = e.module_id
    AND a.call_type_id     = f.call_type_id
    AND a.orgid            = j.orgid
    AND j.tree             = 'HLPDK'
    AND a.upduserid        = g.user_name(+)
    AND a.mode_id          = h.mode_id(+)
    AND a.appl_id          = i.appl_id(+)
    AND a.env_id           = i.env_id(+)
    AND a.last_action_user = k.user_name(+)
    AND a.last_action_user = l.team_id(+)
    AND a.call_id          = ku.call_id(+)
    AND NVL (ku.upduserid, a.upduserid) = lu.user_name(+)
    AND a.call_id          = stat.call_id
    AND a.assignment_team = t.team_id;

How can i make magic bullet looks recognize my second graphic card in my mac book pro 2009

how can i make magic bullet looks recognize my second graphic card in my mac book pro 2009

That model MBP gives you a choice of cards to use – one at a time. it is not designed for them to run in tandem - splitting up the workload.
Russ

0sx 10.9.2 says it is installed but latest software shows as 10.9.1. how can i make sure it is installed?

how can i make sure 10.9.2 installs?

I installed 10.9.2 and after restart it still says I am on 10.9.1 also. I tried downloading the aforementioned files, and when I try to open them it says they are not recognized...? ***? I've been a mac user for 20 years, and I'm a split second away from going PC. Anybody have any guesses?

How can I make postings to Profit center in fb01?

Dear All,
I have activated profit center accounting. And I have created dummy profit center in spro.
I want to use profit center as objects for statistical postings. I have opened field profit center in fb01.
Now when I make actual posting for cost center or internal order I can define profit center too. But even if I choose needed profit center the system puts automatically dummy profit center.
How can I avoid this and define profit center I want?
With best regards,
Kamila Zhakenova.

Hi
You can not achieve that... The PC in FI postings cant be changed when you are making posting to a Cost Element
If there is no PC in your CO object, then Dummy PC will be forced into the posting..
However, if you want to change this behaviour, it is as follows:
But note that, SAP wont take the responsibility for the inconsistency that may arise due to this
+++++++++++++++++++++++++++++++++++++++++++++++++++++
LKAIPF1N, form SUBST_FROM_REAL_OBJECT:
GD_ACC_LIST-CO_KAERG = CON_ACC_STAT )
AND NOT SFR_COBL-PRCTR IS INITIAL.
LD_PRCTR = SFR_COBL-PRCTR.
ENDIF.
IF LD_PRCTR IS INITIAL. "<<<<<<<<<<<<<<<<<<<< delete
IF LD_PRCTR IS INITIAL and "<<<<<<<<<<<<< insert
not ( not SFR_COBL-PRCTR is initial and "<<<<<<<<<<<<< insert
GD_ACC_LIST-CO_KAKST = CON_ACC_REAL ). "<<<<<<<<<<<<< insert
LD_PRCTR = TKA01-DPRCT.
ENDIF.
IF LD_PRCTR <> SPACE.
sending of message moved to Form PROFIT_CENTER_CHECK "DEL 569565
SFR_COBL-PRCTR = LD_PRCTR.
ENDIF.
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
With this modification, the profit center entered won't be changed for postings coming into the CO-interface. All other, especially
internal postings, cannot be changed.
br, Ajay M

How can i make it auto line alignment in ScriptUI?

I want that form recognize new line character. (like '\n')
So I programmed like this. But it's not working.
var win =new Window ("dialog", "test");
win.orientation = "column";
var form1 = win.add ("edittext", undefined, "");
form1.onChanging = function(){
if(form1.text.search("\n") == true){
form2.active = true;
var form2 = win.add ("edittext", undefined, "");
var form3 = win.add ("edittext", undefined, "");
win.show();
How can i make it auto line alignment in ScriptUI?
Is it possible?

Your answer is not exactely I want.
But I got hint from your answer.
All I want is "How I can split multilined text into dozen edittext field?"
So I can make this from your sourcecode.
Your answer is so helpful.
Thank you.
var win = new Window ("dialog", "test");
win.orientation = "column";
var charLen=30;
var copytext = [];
var form0 = win.add ("edittext", [0, 0, 150, 200], "", {multiline:true});
form0.height = 100;
var form1 = win.add ("edittext", undefined, "",{readonly:true});
form1.characters = charLen;
var form2 = win.add ("edittext", undefined, "",{readonly:true});
form2.characters = charLen;
var form3 = win.add ("edittext", undefined, "",{readonly:true});
form3.characters = charLen;
form1.active = true;
form0.onChanging = function(){
form1.text = form0.text.split('\n')[0]
form2.text = form0.text.split('\n')[1]
form3.text = form0.text.split('\n')[2]
win.show();

How can I make biscuit and then break it to two parts and have some small pieces?

Hello there,
please tell me ..
How can I make biscuit in AE and then break it to two parts and have some small pieces fall down ?
any help would be so much appreciated ..

Strictly inside AE you have two options. Shatter using custom shatter maps and masking + particle effects. Neither would be as conviceing as Dave's solution.
If you have access to a 3D app (blender is free) you can do it there.
Here's a 2 minute project in AE with a stock image:
with a shot of the broken buscuit top animated to fit the split it might be kind of convincing.
Here's the CS6 AEP project file for you to play with. Take a look at all of the elements to see how this worked by selecting all layers and then pressing the u key twice to see everything I changed.

How can I make the X axis temporally proportional?

I have a very simple line chart with decimal values on the Y axis and dates on the X axis. The dates are one per row in my source spreadsheet but they are not "evenly spaced". How can I make the chart reflect linear time, plotting the date categories irregulary along a smooth timeline?

Look forward to the real experts' comments on chart overlays.
As for date-format for X-axis it took some fiddling for me (sometimes it was greyed out) but it does work.
Either leave it as Same as Source Data or pick Date and Time and choose one of the many formats available, some shorter than the source data format.
I haven't figured out how to make specific dates show up on the axis, e.g. in my example it would be nicer to show mid-month and/or month-end dates. Numbers seems to split into intervals based on the number of Steps, with little (no?) control over where intervals begin/end.

How can I make a Splitting in Cost center accounting by Cost elements?

Similar Messages

Maybe you are looking for