How can I make a synced audio track match the length of selected clips in a multicam seq?

I have a continuous multicam sequence of about 13 minutes containing a synced master audio track recorded from seperate microphones. I want to rearrange scenes from it into my final sequence, but when I select a range of clips to nest the entire length of audio gets pasted into the new sequence. I want to trim the audio to match just the clips I've selected but not lose sync. Is there a way to do this or is nesting not the way to chop up a sequence and rearrange the scenes in it?
Thanks.
Mike

Me too!!!  I have a multicam sequence from 2 cameras with the audio staying on camera 1. I also have a seperate, continuous  audio track recorded from microphones which I have synced to the timeline. I'm trying to select a group of sequential clips of different camera angles from the timeline to create scenes which I can insert into a final sequence but in a different order from how they are on the timeline. Let's say I want to take a series of clips that start at 3:30 on the timeline and go until 4:30 on the timeline.  It will contain several cuts between the different cameras and I want to use that section as the first scene of my new sequence. If I select all of the clips in that time period and nest them into a new sequence, I only get the audio from camera 1 on the new TL. If I try window selecting those clips to include the continuous audio track, I get a new TL with 3 minutes and 30 seconds of the desired audio, then the video clips, and then the rest of the audio making a 13 minute TL. I just learned, after searching around, about marking in and out points on my multicam seq. and using the trick of "LIFTing" and then "UNDOing" to keep my  multiseq intact, and then pasting into a new sequence. That works, but I'm only getting the audio track from off the camera. It won't select and lift the section of the other audio track that I want. I'm rushed for time so that's the way I've ended up finishing the video for now. The camera audio is just going to have to do although the mic recording is much better. The more I try to explain this the more confused I get and I'm sure everybody reading it does too. Any ideas?   Thanks!

Similar Messages

  • When i try to upload a .mts file from my Sony camera to Premiere Pro CC it refuses to play the audio! Ofcourse i could convert every single clip but it takes tons of time. How can i make Pr play audio track properly?

    When i try to upload a .mts file from my Sony camera to Premiere Pro CC it refuses to play the audio! Ofcourse i could convert every single clip but it takes tons of time. How can i make Pr play audio track properly?

    Does it not play at all or cannot you get the audio in the timeline?
    Did you copy the entire card to the hdd and then imported the file via the Media Browser?
    Did you source patch the audio tracks?

  • How can i make my outgoing audio work?

    how can i make my outgoing audio work? it works only on speakerphone or headset...

    Very vague.
    Please explain

  • How do i make a still image (photo) fit the length of the music? I record music and want to put the tracks to a video file with a still image of my business logo in the background. Any help?

    How do I make a still image (photo) fit the length of the music? I record music and want to convert the tracks to a video file with a still image of my business logo in the background. On windows movie maker you could just select "fit to music" but this program isnt as easy to figure out! Any help?

    Double-click on the still image in the project timeline to open the Inspector. In the Inspector, adjust the duration by typing in a new duration to match the length of your music. I think the limit for a still image is 10 minutes. If you need more than this, simply drag the image into the timeline again then adjust its duration. The two images will play seamlessly (no gap will be visible).
    See this iMovie Help topic:
    http://help.apple.com/imovie/#mov3a883915
    You can achieve more precision when entering durations by changing a preference in the menu item iMovie Preferences. Check (tick) the preference for Show Time As HH:MM:SS:frames. This will enable you to enter the duration of stills down to the frame level, rather than full seconds (NTSC is 30 frames per second; PAL is 25 fps). When entering times, type a colon between each time segment, such as 2:50:15, which represents 2 minutes 50 seconds and 15 frames. For 5 seconds 20 frames you would enter 5:20 and so forth.
    Note that the music will only run to the length of the video in the timeline (in your case, the still images). So, after increasing the stills duration you will need to drag the end of the music track as far as required. The stills can be dragged inwards to reduce the duration if necessary.
    John
    Message was edited by: John Cogdell - added Note

  • How can I make a fade out effect at the end of the song in garageband for iPad?

    I want to made this effect but honestly I have no idea about what I have to do. u.u Please help.

    ClaudioWalrus wrote:
    How can I make a fade out effect at the end of the song in garageband for iPad?
    GB for iPad doesn't have volume automation, you'd need to import the project into GB on a Mac to create the fade with a volume curve.
    as an alt, finish your song and export the audio file, then import the audio file in an audio editor and create a volume fade with that:
    http://www.bulletsandbones.com/GB/GBFAQ.html#audioeditors
    (Let the page FULLY load. The link to your answer is at the top of your screen)

  • How can I make signature darker when I print the report?

    I need to put my manager's signature on the report. The signature is too light, How can I make it darker when I print the report?
    I used file link and OLE, both did't make it.
    Thanks.

    No way to do it directly in the report. You need to work with signature image file using any graphic software to increase its contrast. The easiest probably would be to use Paintbrush and change the image to black-and-white, then save back as jpeg file.

  • How can I make my imap email not take the emails off the server?

    How can I make my imap email not take the emails off the server when I delete them on my iPad?
    Can anyone help me whith this?
    I tried to use the pop account in gmail settings but that was downloading all my emails sice 2008 ( more than 300 deleted emails tha can only be found in the deleted email box), when I just have 5 or 6 email in the inbox .
    How can I solve this????
    Thank u all...

    I have the same problem. For years I have been able to delete emails from my ipad and have them remain on the server so I can deal with them on the desktop. Now they get deleted from the server when deleted from the ipad, which makes the ipad unless for reading mail.
    You answered to delete the email account on the ipad and set up a new one as a pop. I have made many attempts to do that in the  incomping mail server "Host Name" field but it always errors out even when the host name is equal to what my desk top has. So I can see no way to change away from IMAP. I started with an ipad 1 and now have an ipad 2.
    Rachael

  • How can I Make just one color pop and the rest a black and white photo??

    How can I make just one color pop and the rest of the photo black and white?? I'm using iphoto...

    3rd party image editors like Photoshop Elements for Mac can do it:
    Click to play video screenshot
    Or use it to keep an object in color and the rest B/W.
    Click to view full size
    OT

  • When I attach a file to outgoing mail it shows up in the body of the e-mail. How can i make it only show up at the end or elsewhere?

    When I attach a file to outgoing mail it shows up in the body of the e-mail. How can i make it only show up at the end or elsewhere?

    Edit > Attachments > Insert Attachments at End of Message. If a new message is the active window, the option applies only to that message. If you don't have a new message open, then the option becomes Always Insert Attachments at End of Message.

  • How can i make voiceover read paragraphs than reading the entire page

    how can i make voiceover read paragraphs than reading the entire page of an ebook

    If you are using rectangle as layer or accordion menu then you can use 100% width for these page items.
    In control strip options , when you select the rectangle you can view 100% width button which would make it browser width.
    http://tv.adobe.com/watch/muse-feature-tour/muse-design-for-flexible-browser-width/
    Thanks,
    Sanjit

  • How can I make my computer restart with all the same windows that were open when a shut it down?

    How can I make my computer restart with all the same windows that were open when a shut it down?

    That is the way Mac OS X 10.8 (aka Mountain Lion) works by default. Are you actually running that system? (See About This Mac in the Apple menu.) If so, make sure the check box in the shut down alert is checked:

  • How can i make my phone die faster if the screen is black

    how can i make my phone die faster if the screen is black?

    There are some misconceptions that open apps consume battery power.  This is generally incorrect.  Read: http://speirs.org/blog/2012/1/2/misconceptions-about-ios-multitasking.html

  • HT201250 When Time Machine starts backingup, It popsup a small window that stays up the whole time it is backingup.  How can I make it do its job in the background without the popup?

    When Time Machine starts backingup, It popsup a small window that stays up the whole time it is backingup.  How can I make it do its job in the background without the popup?

    just let it do it for the first time.  actually you might want to option click the little symbol next to the time representing timemachine then click verify bacups
    Message was edited by: Carlo TD

  • How can I add a dip to white at the beginning of a clip?

    How can I add a dip to white at the beginning of a clip?  I know where to find it on Pr, but I'm new to AE.  I have 2 clips that need to transition one to the other.  The first clip ends by dipping to white; therefore, I need to either dip to white at the beginning of the 2nd clip & line them up so they overlap well, OR I need to find a white transition to place between them like in Pr.

    Make a whote solid.  Animate its opacity from 0 to 100 and back again.
    You'll use couple-three layers -- no automatic transitions in AE.  That's what Premiere's for.

  • When using imovie for Ipad, how can I fast forward a project to cut the length down?

    When using imovie for Ipad, how can I fast forward a project to cut the length down to fit under the 15 minutes required for Youtube? My current project is 23 minutes, and need to cut it down below 15 minutes. I was hoping to speed up the video. The content would actually be better viewed in at a faster speed anyhow.

    Jon,
    It sounds like you did, just as you should, Save_As and Delete everything that is unwanted. If you did the Deletion from the Timeline, there should be nothing from the old Project, that should be included. A DVD is Transcoded and burned from the Timeline. If the Assets are not there, they will not included in the DVD, even if you did not Delete anything from the Project Panel.
    Tell us about the Clips now on your Timeline. Also, can you check the Timeline, by hitting the \ (Backslash key), and looking near the end of the Timeline. Do you have any "orphans" out there? Check all Video Tracks, even if you have to scroll to see them all. Does the Duration of the Timeline (viewed in the Program Monitor) match what you think that it should? If not, then you most likely have orphans, that you missed Deleteing.
    Good luck,
    Hunt

Maybe you are looking for