How can I make a text box in Aperture transparent??
Hello,
After a great trip to Thailand I want to make a book of all my pictures using Aperture 3. At some places in the book I use a title to indicate what will be shown on the image. This title is made by the text box and it is put on the image itself. Now what I would like is to make is a transparent bar of the text box, so that I still can see the details of the image through this bar and also read the text about the image easily.
I have no problems making this text box and putting it in the right place, the thing that I don't understand, after two nights of trying, is how to make this text box transparent.
Any help is appreciated!
Thanks in advance!
Perhaps I need to reformulate what I exactly want to do...!
I would like to use transparent text boxes but not as transparent as the image itself. I want to show the text box as a real bar but slightly different than the original image colour. So something between a normal image and a white bar so that it will be a bit transparent but also shown as a real bar..
I think the text boxes of each theme are identical, so yes you are right about the transparent text boxes of art collection but they are the same as photo essay.
Do you understand what I mean?
Similar Messages
-
How can I make a text box with 2 columns?
I can't figure out how to make a text box with two columns. I made one in pages and pasted it into iWeb but it seems to have turned it into an image when I published to a folder. I want to keep it text so the search engines will index it.
Any suggestions would be greatly appreciated.
Thanks, DavidYou will have to create two text boxes, configure them as columns and then paste into the first and cut where you want the columns to end and paste the remainder into the second column as on this page . I've tried saving a two column Word document as a web page and it just converts it to one column.
OT -
How can I make the »Text Box« blend with the background?
I have a problem that my document is almost finished, but still I cannot solve one basic problem. My “Text box” fields are still selectable (I get the blue select/resize buttons around the text) when I click on them when reviewing my document in the reader. In this “Text box” fields there is text that is not meant to be changed by the end user. It should just be shown (blend with the background) and not selectable. This resize buttons around the text box don’t work and don’t allow the end user to change the size but their presence alone drives me crazy.
Should I use the “Stamp” tool in this case or is there a setting (with the text box tool) that I’m missing?It seems that I found the solution. Is the only way to avoid the before mentioned edit box that I use the TouchUp Text tool to add text?
-
How can I make a gray box or gray screen in Pages over a few lines of text?
How can I make a gray box or gray screen in Pages over a few lines of text?
Thanks. Almost what I was looking for.
While that makes for a gray over the lines, it still does not form a box.
Any other suggestions to form a solid rectangular gray box? -
How can i make the text bigger?
How can i make the text bigger?
1. press "T" to bring up the text tool.
2. click the text you want to edit
3. highlight the text you want to change size with your cursur
4. If it's not already up, press Command + T to bring up the text tool box and adjust the size under the character group. The value you want to change will have a "TT" next to it.
If this doesn't help. More details will help us help you. -
How can i make the text go vertically in numbers
How can I make the text vertical in numbers? I have merged the cells and cannot find an option for making it go vertical as opposed to horizontal.
I already gave two tools to fit this kind of needs.
tip #1 :
--{code}
--[SCRIPT write_vertically]
Enregistrer le script en tant que Script : write_vertically.scpt
déplacer le fichier ainsi créé dans le dossier
<VolumeDeDémarrage>:Utilisateurs:<votreCompte>:Bibliothèque:Scripts:Applications :Numbers:
Il vous faudra peut-être créer le dossier Numbers et peut-être même le dossier Applications.
Saisir dans une cellule le mot à écrire verticalement puis le sélectionner.
ATTENTION, il ne faut pas sélectionner la cellule mais le mot qui doit apparaitre surligné.
Aller au menu Scripts , choisir Numbers puis choisir “write_vertically”
Le script colle dans la cellule le mot apès avoir inséré un return entre tous les caractères.
Pour mon usage personnel j'associe un raccourci à ce script grace à FastScripts.
--=====
L’aide du Finder explique:
L’Utilitaire AppleScript permet d’activer le Menu des scripts :
Ouvrez l’Utilitaire AppleScript situé dans le dossier Applications/AppleScript.
Cochez la case “Afficher le menu des scripts dans la barre de menus”.
Sous 10.6.x,
aller dans le panneau “Général” du dialogue Préférences de l’Éditeur Applescript
puis cocher la case “Afficher le menu des scripts dans la barre des menus”.
--=====
Save the script as a Script: write_vertically.scpt
Move the newly created file into the folder:
<startup Volume>:Users:<yourAccount>:Library:Scripts:Applications:Numbers:
Maybe you would have to create the folder Numbers and even the folder Applications by yourself.
In a cell, type a word to write vertically then select it.
CAUTION, don’t select the cell but the word which must be highlighted.
Go to the Scripts Menu, choose Numbers, then choose “write_vertically”
The script insert in the cell the word after inserting a return between every characters.
For my own use, I link a shortcut to the script thank to FastScripts.
--=====
The Finder’s Help explains:
To make the Script menu appear:
Open the AppleScript utility located in Applications/AppleScript.
Select the “Show Script Menu in menu bar” checkbox.
Under 10.6.x,
go to the General panel of AppleScript Editor’s Preferences dialog box
and check the “Show Script menu in menu bar” option.
--=====
Yvan KOENIG (VALLAURIS, France)
2011/12/17
2012/01/01 no longer use a local variable, use result
--=====
on run
Clear the clipboard *)
set the clipboard to ""
Copy the selection in the clipboard *)
my raccourci("Numbers", "c", "c")
Loop waiting that the clipboard is really filled *)
repeat
try
if (the clipboard as text) is not "" then exit repeat
on error
end try
end repeat
Extract the clipboard's content *)
the clipboard as text
Insert return between every characters *)
my recolle(every character of result, return)
Fill the clipboard with the edited string *)
set the clipboard to result
Paste in the cell *)
my raccourci("Numbers", "v", "cas")
end run
--=====
on recolle(l, d)
local oTIDs, t
set oTIDs to AppleScript's text item delimiters
set AppleScript's text item delimiters to d
set t to l as text
set AppleScript's text item delimiters to oTIDs
return t
end recolle
--=====
on activateGUIscripting()
(* to be sure than GUI scripting will be active *)
tell application "System Events"
if not (UI elements enabled) then set (UI elements enabled) to true
end tell
end activateGUIscripting
--=====
==== Uses GUIscripting ====
This handler may be used to 'type' text, invisible characters if the third parameter is an empty string.
It may be used to 'type' keyboard raccourcis if the third parameter describe the required modifier keys.
I changed its name « shortcut » to « raccourci » to get rid of a name conflict in Smile.
on raccourci(a, t, d)
local k
tell application a to activate
tell application "System Events" to tell application process a
set frontmost to true
try
t * 1
if d is "" then
key code t
else if d is "c" then
key code t using {command down}
else if d is "a" then
key code t using {option down}
else if d is "k" then
key code t using {control down}
else if d is "s" then
key code t using {shift down}
else if d is in {"ac", "ca"} then
key code t using {command down, option down}
else if d is in {"as", "sa"} then
key code t using {shift down, option down}
else if d is in {"sc", "cs"} then
key code t using {command down, shift down}
else if d is in {"kc", "ck"} then
key code t using {command down, control down}
else if d is in {"ks", "sk"} then
key code t using {shift down, control down}
else if (d contains "c") and (d contains "s") and d contains "k" then
key code t using {command down, shift down, control down}
else if (d contains "c") and (d contains "s") and d contains "a" then
key code t using {command down, shift down, option down}
end if
on error
repeat with k in t
if d is "" then
keystroke (k as text)
else if d is "c" then
keystroke (k as text) using {command down}
else if d is "a" then
keystroke k using {option down}
else if d is "k" then
keystroke (k as text) using {control down}
else if d is "s" then
keystroke k using {shift down}
else if d is in {"ac", "ca"} then
keystroke (k as text) using {command down, option down}
else if d is in {"as", "sa"} then
keystroke (k as text) using {shift down, option down}
else if d is in {"sc", "cs"} then
keystroke (k as text) using {command down, shift down}
else if d is in {"kc", "ck"} then
keystroke (k as text) using {command down, control down}
else if d is in {"ks", "sk"} then
keystroke (k as text) using {shift down, control down}
else if (d contains "c") and (d contains "s") and d contains "k" then
keystroke (k as text) using {command down, shift down, control down}
else if (d contains "c") and (d contains "s") and d contains "a" then
keystroke (k as text) using {command down, shift down, option down}
end if
end repeat
end try
end tell
end raccourci
--=====
--[/SCRIPT]
--{code}
tip #2 :
--{code}
--[SCRIPT rotate_cell_contents]
Enregistrer le script en tant que Script : rotate_cell_contents.scpt
déplacer le fichier ainsi créé dans le dossier
<VolumeDeDémarrage>:Users:<votreCompte>:Library:Scripts:Applications:Numbers:
Il vous faudra peut-être créer le dossier Numbers et peut-être même le dossier Applications.
Sélectionner une cellule dont le texte doit être tourné de 90 degrés.
Aller au menu Scripts , choisir Numbers puis choisir “rotate_cell_contents”
--=====
L’aide du Finder explique:
L’Utilitaire AppleScript permet d’activer le Menu des scripts :
Ouvrez l’Utilitaire AppleScript situé dans le dossier Applications/AppleScript.
Cochez la case “Afficher le menu des scripts dans la barre de menus”.
Sous 10.6.x,
aller dans le panneau “Général” du dialogue Préférences de l’Éditeur Applescript
puis cocher la case “Afficher le menu des scripts dans la barre des menus”.
--=====
Save the script as a Script: rotate_cell_contents.scpt
Move the newly created file into the folder:
<startup Volume>:Users:<yourAccount>:Library:Scripts:Applications:Numbers:
Maybe you would have to create the folder Numbers and even the folder Applications by yourself.
Select a cell whose contents must be rotated for 90 degrees.
Go to the Scripts Menu, choose Numbers, then choose “rotate_cell_contents”
--=====
The Finder’s Help explains:
To make the Script menu appear:
Open the AppleScript utility located in Applications/AppleScript.
Select the “Show Script Menu in menu bar” checkbox.
Under 10.6.x,
go to the General panel of AppleScript Editor’s Preferences dialog box
and check the “Show Script menu in menu bar” option.
--=====
Yvan KOENIG (VALLAURIS, France)
2011/06/23
2011/06/26 -- No longer use an auxiliary text box. Now keep the text attributes.
2012/01/31 -- edited for Lion
--=====
on run
local dName, sName, tName, rowNum1, colNum1, rowNum2, colNum2
local le_texte, la_largeur, la_hauteur, myNewDoc
my activateGUIscripting()
Extract properties of the source/target cell *)
set {dName, sName, tName, rowNum1, colNum1, rowNum2, colNum2} to my get_SelParams()
tell application "Numbers" to tell document dName to tell sheet sName to tell table tName
set selection range to range (name of column colNum1 & name of row rowNum1)
end tell
Cut*)
my raccourci("Numbers", "x", "c")
Trigger Preview *)
tell application "System Events"
if "Preview" is not in (name of every application process) then launch application "Preview"
end tell
delay 0.2 -- required
New document from the clipboard *)
my raccourci("Preview", "n", "c")
Rotate to left *)
my raccourci("Preview", "l", "c")
Copy *)
my raccourci("Preview", "c", "c")
Quit *)
my raccourci("Preview", "q", "c")
(system attribute "sys2") < 7
if result then
Click the [Don't Save] button in the warning sheet *)
tell application "Preview" to activate
tell application "System Events" to tell application process "Preview" to tell window 1
name of buttons
repeat 50 times
delay 0.1
if exists sheet 1 then exit repeat
end repeat
tell sheet 1 to click button 2
end tell
end if
Back to Numbers *)
tell application "Numbers" to tell document dName to tell sheet sName to tell table tName
-- just reset the focus on the table
end tell
Paste in the cell *)
my raccourci("Numbers", "v", "c")
end run
--=====
set { dName, sName, tName, rowNum1, colNum1, rowNum2, colNum2} to my get_SelParams()
tell application "Numbers" to tell document dName to tell sheet sName to tell table tName
on get_SelParams()
local d_name, s_name, t_name, row_num1, col_num1, row_num2, col_num2
tell application "Numbers" to tell document 1
set d_name to its name
set s_name to ""
repeat with i from 1 to the count of sheets
tell sheet i to set maybe to the count of (tables whose selection range is not missing value)
if maybe is not 0 then
set s_name to name of sheet i
exit repeat
end if -- maybe is not 0
end repeat
if s_name is "" then
if my parleAnglais() then
error "No sheet has a selected table embedding at least one selected cell !"
else
error "Aucune feuille ne contient une table ayant au moins une cellule sélectionnée !"
end if -
How can I make a check box active ONLY if another check box is activated?
How can I make a check box active ONLY if another check box is activated?
I have an editable PDF for a client, which contains text fields and check box fields.
There are three main check boxes (let's call them A, B and C) that the user is required to choose from, and I have given all three the same name in the Name tab of the General tab menu but different export values in order that ONLY one of the boxes can be checked at any time. Ticking one will deactivate another if it is already checked, etc.
However, I then have a further two check boxes which I wish to become available ONLY if the second one of the above three boxes is checked. Other than that I do not wish the user to have access to them.
I'm guessing it requires some kind of Action Script or Javascript, which is not my forté! Any help would be much appreciated.
Regards
TonySee Disabling (graying-out) Form Fields by Thom Parker. It covers both Acrobat and LiveCycle forms.
-
How can I make the combo box turn to the value of black.
When the show button is pressed (and not before), a filled black square should be
displayed in the display area. The combo box (or drop down list) that enables the user to choose the colour of
the displayed shape and the altering should take effect immediately.When the show button is pressed,
the image should immediately revert to the black square, the combo box should show the value that
correspond to the black.
Now ,the problem is: after I pressed show button, the image is reverted to the black square,but I don't know
how can I make the combo box turn to the value of black.
Any help or hint?Thanks a lot!
coding 1.
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
import javax.swing.event.*;
public class test extends JFrame {
private JPanel buttonPanel;
private DrawPanel myPanel;
private JButton showButton;
private JComboBox colorComboBox;
private boolean isShow;
private int shape;
private boolean isFill=true;
private String colorNames[] = {"black", "blue", "cyan", "darkGray", "gray",
"green", "lightgray", "magenta", "orange",
"pink", "red", "white", "yellow"}; // color names list in ComboBox
private Color colors[] = {Color.black, Color.blue, Color.cyan, Color.darkGray,
Color.gray, Color.green, Color.lightGray, Color.magenta,
Color.orange, Color.pink, Color.red, Color.white, Color.yellow};
public test() {
super("Draw Shapes");
// creat custom drawing panel
myPanel = new DrawPanel(); // instantiate a DrawPanel object
myPanel.setBackground(Color.white);
// set up showButton
// register an event handler for showButton's ActionEvent
showButton = new JButton ("show");
showButton.addActionListener(
// anonymous inner class to handle showButton events
new ActionListener() {
// draw a black filled square shape after clicking showButton
public void actionPerformed (ActionEvent event) {
// call DrawPanel method setShowStatus and pass an parameter
// to decide if show the shape
myPanel.setShowStatus(true);
isShow = myPanel.getShowStatus();
shape = DrawPanel.SQUARE;
// call DrawPanel method setShape to indicate shape to draw
myPanel.setShape(shape);
// call DrawPanel method setFill to indicate to draw a filled shape
myPanel.setFill(true);
// call DrawPanel method draw
myPanel.draw();
myPanel.setFill(true);
myPanel.setForeground(Color.black);
}// end anonymous inner class
);// end call to addActionListener
// set up colorComboBox
// register event handlers for colorComboBox's ItemEvent
colorComboBox = new JComboBox(colorNames);
colorComboBox.setMaximumRowCount(5);
colorComboBox.addItemListener(
// anonymous inner class to handle colorComboBox events
new ItemListener() {
// select shape's color
public void itemStateChanged(ItemEvent event) {
if(event.getStateChange() == ItemEvent.SELECTED)
// call DrawPanel method setForeground
// and pass an element value of colors array
myPanel.setForeground(colors[colorComboBox.getSelectedIndex()]);
myPanel.draw();
}// end anonymous inner class
); // end call to addItemListener
// set up panel containing buttons
buttonPanel = new JPanel();
buttonPanel.setLayout(new GridLayout(4, 1, 0, 50));
buttonPanel.add(showButton);
buttonPanel.add(colorComboBox);
JPanel radioButtonPanel = new JPanel();
radioButtonPanel.setLayout(new GridLayout(2, 1, 0, 20));
Container container = getContentPane();
container.setLayout(new BorderLayout(10,10));
container.add(myPanel, BorderLayout.CENTER);
container.add(buttonPanel, BorderLayout.EAST);
setSize(500, 400);
setVisible(true);
public static void main(String args[]) {
test application = new test();
application.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
coding 2
import java.awt.*;
import javax.swing.*;
public class DrawPanel extends JPanel {
public final static int CIRCLE = 1, SQUARE = 2;
private int shape;
private boolean fill;
private boolean showStatus;
private int shapeSize = 100;
private Color foreground;
// draw a specified shape
public void paintComponent (Graphics g){
super.paintComponent(g);
// find center
int x=(getSize().width-shapeSize)/2;
int y=(getSize().height-shapeSize)/2;
if (shape == CIRCLE) {
if (fill == true){
g.setColor(foreground);
g.fillOval(x, y, shapeSize, shapeSize);
else{
g.setColor(foreground);
g.drawOval(x, y, shapeSize, shapeSize);
else if (shape == SQUARE){
if (fill == true){
g.setColor(foreground);
g.fillRect(x, y, shapeSize, shapeSize);
else{
g.setColor(foreground);
g.drawRect(x, y, shapeSize, shapeSize);
// set showStatus value
public void setShowStatus (boolean s) {
showStatus = s;
// return showstatus value
public boolean getShowStatus () {
return showStatus;
// set fill value
public void setFill(boolean isFill) {
fill = isFill;
// set shape value
public void setShape(int shapeToDraw) {
shape = shapeToDraw;
// set shapeSize value
public void setShapeSize(int newShapeSize) {
shapeSize = newShapeSize;
// set foreground value
public void setForeground(Color newColor) {
foreground = newColor;
// repaint DrawPanel
public void draw (){
if(showStatus == true)
repaint();Hello,
does setSelectedIndex(int anIndex)
do what you need?
See Java Doc for JComboBox. -
How can I make the text bigger in iCal?
How can I make the text bigger in iCal? I've looked at Preferences and View.
Sorry, did not see that you are using 10.6.7
-
How can I make the annotation box show in the printed word version on the pages app?
I want to insert annotation box on the side of the text. But I found that i cannot do that, and the annotation box disappear on the printed version of my document. How can I make that appear on my printed verison? Thank you!
You are referring to Comments and Apple has removed the old method from Pages 5.
If it is important to you go back to using Pages '09 which should still be in your Applications/iWork folder.
Peter -
How can I add linked text boxes to Contents?
I have a lot of sections in my chapters, and I think they are all coming in to the TOC, but the automatic text box doesn't have a blue tab, so I cannot add a new text box to continue showing the sections. How can I make this show up? There's no layout I can manipulate for the TOC, so I cannot make the text editable, which is the suggestion that I have seen for regular linked text boxes.
Hello,
If you want to add image to it's background then you can select the SubMenu and use the fill option to fill an image to it.
Make sure you uncheck "Edit together" option in Menu properties so that you can add different images to different submenus.
And if you want to edit the text and add images to it, I would suggest you to use Manual menu. Where you can customize your own Menu and add links to the Menus and Submenus.
Please have a look at the screenshot showing how to create Manual menu :
Hope this helps.
Regards,
Sachin -
The email that I am reading is very large with a lot of stuff that I do not need to see. How can I make my box smaller?
''hhennes [[#question-1047185|said]]''
<blockquote>
The email that I am reading is very large with a lot of stuff that I do not need to see. How can I make my box smaller?
</blockquote> -
When I print a webpage from FF how can I make the text and images bigger?
I am trying to print an eticket for a flight. The text on the schedule comes out too small and the UPC symbol's black lines look ganged together. I know I can view it zoomed up, but how do I make the text and images stay zoomed so they will print out that way?
I upgraded but the problem remains. At least with Firefox I do have the option to print a selection even if it mangles the top and bottom lines. With Safari or Chrome I have no option to print a selection. At the moment the only way to get a complete copy of the selection is to copy to openoffice etc and print from there.
-
How can i pin a text box to the bottom of a VBOX
Hi,
Thank you in advance for your time, the question is how do i pin a text box to the bottom of a VBox, i dont know what code to add kindly help me out. The code i have with me is
VBox {
translateX: 10
translateY: 10
spacing: 20
content: [
Label {
text: "TextBox:"
TextBox {
layoutInfo: LayoutInfo { minWidth: 100 width: 150 maxWidth: 200 }
] //contents
//VBox
now the text box has to go to the bottom of the VBox even if the VBox has other objects or if its resized.
Regards,
KibuVbox, acts much like a linear layout like in other languages.
Just keep your declared textbox at the bottom of your content (content :[] ), then the text box will continue to get pushed further down your view, as you add other controls to your content.
layoutX and layoutY will just increase your spacing from the previous declared control in that content. -
How do I use metadata text box in Aperture Book
When I hit the button for a text box, I get a text box. Likewise for a new photo box. What I really want is a metadata text box and when I hit that button nothing happens. I have tried it with a photo selected and on a blank page.
How do I use the metadata text box in Aperture books? BTW I am working on a small sized soft cover book.
Powerbook G4 1.5 Mac OS X (10.3.6)Do you have a copy of Illustrator installed?
Then just begin at page 1, read it and practice what you read. Step by step.
If you don't understand parts of it, dive into the manual as well or ask a question in this forum. But mind that not everybody has a copy of the Classroom in a book. So you need to ask your questions precisely and post screenshots of your artwork.
Maybe you are looking for
-
I'm unable to successfully get the SOA server up and running on Vista using Oracle database 10.2.0.4. When starting the SOA or BAM server, the system responds after a while that the server started ok, but the deployments apparently fail. I have the f
-
Hello Friends, When we are trying to create a TO (transfer order ) using FM 'L_TO_CREATE_MULTIPLE' for greater then pallet quantity/size of a material it is given me message in u201Cinsufficient quantityu201D. But there are many pallets for the ma
-
Hi All, Here the linked server is created between sql server 2012 64 bit and sql server 2005 32 bit. I am getting the below error when i try to access linked server from third server. I have created linked from Instance 1 to Instance 2. When i acces
-
we have done a query in sq01.i have downloaded it from production to development. now i am trying to execute the query , but it is sowing a dialog box to select the variant. i am selecting variant as standard.after executing the query it is giivng me
-
I've been trying to sync my iPod Touch to my computer for a while. Wanted to add new songs to my playlists and now it's saying no content found after every sync. I'm so confused.