How can I make a text box with 2 columns?
I can't figure out how to make a text box with two columns. I made one in pages and pasted it into iWeb but it seems to have turned it into an image when I published to a folder. I want to keep it text so the search engines will index it.
Any suggestions would be greatly appreciated.
Thanks, David
You will have to create two text boxes, configure them as columns and then paste into the first and cut where you want the columns to end and paste the remainder into the second column as on this page . I've tried saving a two column Word document as a web page and it just converts it to one column.
OT
Similar Messages
-
How can I make a text box in Aperture transparent??
Hello,
After a great trip to Thailand I want to make a book of all my pictures using Aperture 3. At some places in the book I use a title to indicate what will be shown on the image. This title is made by the text box and it is put on the image itself. Now what I would like is to make is a transparent bar of the text box, so that I still can see the details of the image through this bar and also read the text about the image easily.
I have no problems making this text box and putting it in the right place, the thing that I don't understand, after two nights of trying, is how to make this text box transparent.
Any help is appreciated!
Thanks in advance!Perhaps I need to reformulate what I exactly want to do...!
I would like to use transparent text boxes but not as transparent as the image itself. I want to show the text box as a real bar but slightly different than the original image colour. So something between a normal image and a white bar so that it will be a bit transparent but also shown as a real bar..
I think the text boxes of each theme are identical, so yes you are right about the transparent text boxes of art collection but they are the same as photo essay.
Do you understand what I mean? -
How can I make the »Text Box« blend with the background?
I have a problem that my document is almost finished, but still I cannot solve one basic problem. My “Text box” fields are still selectable (I get the blue select/resize buttons around the text) when I click on them when reviewing my document in the reader. In this “Text box” fields there is text that is not meant to be changed by the end user. It should just be shown (blend with the background) and not selectable. This resize buttons around the text box don’t work and don’t allow the end user to change the size but their presence alone drives me crazy.
Should I use the “Stamp” tool in this case or is there a setting (with the text box tool) that I’m missing?It seems that I found the solution. Is the only way to avoid the before mentioned edit box that I use the TouchUp Text tool to add text?
-
How can I find a text box with a specific word in it ?
Hi,
I have hundreds of settlement names on a map created with the text tool. How can I search on the name of one of them and find it on my map ?
I am with FH9 but the method would no doubt be backwards compatible from MX. If it isnt I would launch MX just for this exercise.
Would this also work if the word was part of a text box text ?
I have the luxury of it being the entire text box !
Cheers
EnvirographicsIf you have one large text box to search for the word, select it, then go to EDIT>FIND & REPLACE>TEXT...
Type in your word and click FIND NEXT button. If you have multiple occurances of the name, keep clicking the FIND NEXT button until the word hilites.
If you have scattered text boxes on your map, don't select any of them but still go through the EDIT>FIND & REPLACE>TEXT... routine I mentioned. FreeHand will look through all text boxes to find your word.
Oh yeah, this works the same in FreeHand 8 thru FHMX. -
How can I make a gray box or gray screen in Pages over a few lines of text?
How can I make a gray box or gray screen in Pages over a few lines of text?
Thanks. Almost what I was looking for.
While that makes for a gray over the lines, it still does not form a box.
Any other suggestions to form a solid rectangular gray box? -
How can i make the text bigger?
How can i make the text bigger?
1. press "T" to bring up the text tool.
2. click the text you want to edit
3. highlight the text you want to change size with your cursur
4. If it's not already up, press Command + T to bring up the text tool box and adjust the size under the character group. The value you want to change will have a "TT" next to it.
If this doesn't help. More details will help us help you. -
How can i make the text go vertically in numbers
How can I make the text vertical in numbers? I have merged the cells and cannot find an option for making it go vertical as opposed to horizontal.
I already gave two tools to fit this kind of needs.
tip #1 :
--{code}
--[SCRIPT write_vertically]
Enregistrer le script en tant que Script : write_vertically.scpt
déplacer le fichier ainsi créé dans le dossier
<VolumeDeDémarrage>:Utilisateurs:<votreCompte>:Bibliothèque:Scripts:Applications :Numbers:
Il vous faudra peut-être créer le dossier Numbers et peut-être même le dossier Applications.
Saisir dans une cellule le mot à écrire verticalement puis le sélectionner.
ATTENTION, il ne faut pas sélectionner la cellule mais le mot qui doit apparaitre surligné.
Aller au menu Scripts , choisir Numbers puis choisir “write_vertically”
Le script colle dans la cellule le mot apès avoir inséré un return entre tous les caractères.
Pour mon usage personnel j'associe un raccourci à ce script grace à FastScripts.
--=====
L’aide du Finder explique:
L’Utilitaire AppleScript permet d’activer le Menu des scripts :
Ouvrez l’Utilitaire AppleScript situé dans le dossier Applications/AppleScript.
Cochez la case “Afficher le menu des scripts dans la barre de menus”.
Sous 10.6.x,
aller dans le panneau “Général” du dialogue Préférences de l’Éditeur Applescript
puis cocher la case “Afficher le menu des scripts dans la barre des menus”.
--=====
Save the script as a Script: write_vertically.scpt
Move the newly created file into the folder:
<startup Volume>:Users:<yourAccount>:Library:Scripts:Applications:Numbers:
Maybe you would have to create the folder Numbers and even the folder Applications by yourself.
In a cell, type a word to write vertically then select it.
CAUTION, don’t select the cell but the word which must be highlighted.
Go to the Scripts Menu, choose Numbers, then choose “write_vertically”
The script insert in the cell the word after inserting a return between every characters.
For my own use, I link a shortcut to the script thank to FastScripts.
--=====
The Finder’s Help explains:
To make the Script menu appear:
Open the AppleScript utility located in Applications/AppleScript.
Select the “Show Script Menu in menu bar” checkbox.
Under 10.6.x,
go to the General panel of AppleScript Editor’s Preferences dialog box
and check the “Show Script menu in menu bar” option.
--=====
Yvan KOENIG (VALLAURIS, France)
2011/12/17
2012/01/01 no longer use a local variable, use result
--=====
on run
Clear the clipboard *)
set the clipboard to ""
Copy the selection in the clipboard *)
my raccourci("Numbers", "c", "c")
Loop waiting that the clipboard is really filled *)
repeat
try
if (the clipboard as text) is not "" then exit repeat
on error
end try
end repeat
Extract the clipboard's content *)
the clipboard as text
Insert return between every characters *)
my recolle(every character of result, return)
Fill the clipboard with the edited string *)
set the clipboard to result
Paste in the cell *)
my raccourci("Numbers", "v", "cas")
end run
--=====
on recolle(l, d)
local oTIDs, t
set oTIDs to AppleScript's text item delimiters
set AppleScript's text item delimiters to d
set t to l as text
set AppleScript's text item delimiters to oTIDs
return t
end recolle
--=====
on activateGUIscripting()
(* to be sure than GUI scripting will be active *)
tell application "System Events"
if not (UI elements enabled) then set (UI elements enabled) to true
end tell
end activateGUIscripting
--=====
==== Uses GUIscripting ====
This handler may be used to 'type' text, invisible characters if the third parameter is an empty string.
It may be used to 'type' keyboard raccourcis if the third parameter describe the required modifier keys.
I changed its name « shortcut » to « raccourci » to get rid of a name conflict in Smile.
on raccourci(a, t, d)
local k
tell application a to activate
tell application "System Events" to tell application process a
set frontmost to true
try
t * 1
if d is "" then
key code t
else if d is "c" then
key code t using {command down}
else if d is "a" then
key code t using {option down}
else if d is "k" then
key code t using {control down}
else if d is "s" then
key code t using {shift down}
else if d is in {"ac", "ca"} then
key code t using {command down, option down}
else if d is in {"as", "sa"} then
key code t using {shift down, option down}
else if d is in {"sc", "cs"} then
key code t using {command down, shift down}
else if d is in {"kc", "ck"} then
key code t using {command down, control down}
else if d is in {"ks", "sk"} then
key code t using {shift down, control down}
else if (d contains "c") and (d contains "s") and d contains "k" then
key code t using {command down, shift down, control down}
else if (d contains "c") and (d contains "s") and d contains "a" then
key code t using {command down, shift down, option down}
end if
on error
repeat with k in t
if d is "" then
keystroke (k as text)
else if d is "c" then
keystroke (k as text) using {command down}
else if d is "a" then
keystroke k using {option down}
else if d is "k" then
keystroke (k as text) using {control down}
else if d is "s" then
keystroke k using {shift down}
else if d is in {"ac", "ca"} then
keystroke (k as text) using {command down, option down}
else if d is in {"as", "sa"} then
keystroke (k as text) using {shift down, option down}
else if d is in {"sc", "cs"} then
keystroke (k as text) using {command down, shift down}
else if d is in {"kc", "ck"} then
keystroke (k as text) using {command down, control down}
else if d is in {"ks", "sk"} then
keystroke (k as text) using {shift down, control down}
else if (d contains "c") and (d contains "s") and d contains "k" then
keystroke (k as text) using {command down, shift down, control down}
else if (d contains "c") and (d contains "s") and d contains "a" then
keystroke (k as text) using {command down, shift down, option down}
end if
end repeat
end try
end tell
end raccourci
--=====
--[/SCRIPT]
--{code}
tip #2 :
--{code}
--[SCRIPT rotate_cell_contents]
Enregistrer le script en tant que Script : rotate_cell_contents.scpt
déplacer le fichier ainsi créé dans le dossier
<VolumeDeDémarrage>:Users:<votreCompte>:Library:Scripts:Applications:Numbers:
Il vous faudra peut-être créer le dossier Numbers et peut-être même le dossier Applications.
Sélectionner une cellule dont le texte doit être tourné de 90 degrés.
Aller au menu Scripts , choisir Numbers puis choisir “rotate_cell_contents”
--=====
L’aide du Finder explique:
L’Utilitaire AppleScript permet d’activer le Menu des scripts :
Ouvrez l’Utilitaire AppleScript situé dans le dossier Applications/AppleScript.
Cochez la case “Afficher le menu des scripts dans la barre de menus”.
Sous 10.6.x,
aller dans le panneau “Général” du dialogue Préférences de l’Éditeur Applescript
puis cocher la case “Afficher le menu des scripts dans la barre des menus”.
--=====
Save the script as a Script: rotate_cell_contents.scpt
Move the newly created file into the folder:
<startup Volume>:Users:<yourAccount>:Library:Scripts:Applications:Numbers:
Maybe you would have to create the folder Numbers and even the folder Applications by yourself.
Select a cell whose contents must be rotated for 90 degrees.
Go to the Scripts Menu, choose Numbers, then choose “rotate_cell_contents”
--=====
The Finder’s Help explains:
To make the Script menu appear:
Open the AppleScript utility located in Applications/AppleScript.
Select the “Show Script Menu in menu bar” checkbox.
Under 10.6.x,
go to the General panel of AppleScript Editor’s Preferences dialog box
and check the “Show Script menu in menu bar” option.
--=====
Yvan KOENIG (VALLAURIS, France)
2011/06/23
2011/06/26 -- No longer use an auxiliary text box. Now keep the text attributes.
2012/01/31 -- edited for Lion
--=====
on run
local dName, sName, tName, rowNum1, colNum1, rowNum2, colNum2
local le_texte, la_largeur, la_hauteur, myNewDoc
my activateGUIscripting()
Extract properties of the source/target cell *)
set {dName, sName, tName, rowNum1, colNum1, rowNum2, colNum2} to my get_SelParams()
tell application "Numbers" to tell document dName to tell sheet sName to tell table tName
set selection range to range (name of column colNum1 & name of row rowNum1)
end tell
Cut*)
my raccourci("Numbers", "x", "c")
Trigger Preview *)
tell application "System Events"
if "Preview" is not in (name of every application process) then launch application "Preview"
end tell
delay 0.2 -- required
New document from the clipboard *)
my raccourci("Preview", "n", "c")
Rotate to left *)
my raccourci("Preview", "l", "c")
Copy *)
my raccourci("Preview", "c", "c")
Quit *)
my raccourci("Preview", "q", "c")
(system attribute "sys2") < 7
if result then
Click the [Don't Save] button in the warning sheet *)
tell application "Preview" to activate
tell application "System Events" to tell application process "Preview" to tell window 1
name of buttons
repeat 50 times
delay 0.1
if exists sheet 1 then exit repeat
end repeat
tell sheet 1 to click button 2
end tell
end if
Back to Numbers *)
tell application "Numbers" to tell document dName to tell sheet sName to tell table tName
-- just reset the focus on the table
end tell
Paste in the cell *)
my raccourci("Numbers", "v", "c")
end run
--=====
set { dName, sName, tName, rowNum1, colNum1, rowNum2, colNum2} to my get_SelParams()
tell application "Numbers" to tell document dName to tell sheet sName to tell table tName
on get_SelParams()
local d_name, s_name, t_name, row_num1, col_num1, row_num2, col_num2
tell application "Numbers" to tell document 1
set d_name to its name
set s_name to ""
repeat with i from 1 to the count of sheets
tell sheet i to set maybe to the count of (tables whose selection range is not missing value)
if maybe is not 0 then
set s_name to name of sheet i
exit repeat
end if -- maybe is not 0
end repeat
if s_name is "" then
if my parleAnglais() then
error "No sheet has a selected table embedding at least one selected cell !"
else
error "Aucune feuille ne contient une table ayant au moins une cellule sélectionnée !"
end if -
How can I make a check box active ONLY if another check box is activated?
How can I make a check box active ONLY if another check box is activated?
I have an editable PDF for a client, which contains text fields and check box fields.
There are three main check boxes (let's call them A, B and C) that the user is required to choose from, and I have given all three the same name in the Name tab of the General tab menu but different export values in order that ONLY one of the boxes can be checked at any time. Ticking one will deactivate another if it is already checked, etc.
However, I then have a further two check boxes which I wish to become available ONLY if the second one of the above three boxes is checked. Other than that I do not wish the user to have access to them.
I'm guessing it requires some kind of Action Script or Javascript, which is not my forté! Any help would be much appreciated.
Regards
TonySee Disabling (graying-out) Form Fields by Thom Parker. It covers both Acrobat and LiveCycle forms.
-
How can I make my computer restart with all the same windows that were open when a shut it down?
That is the way Mac OS X 10.8 (aka Mountain Lion) works by default. Are you actually running that system? (See About This Mac in the Apple menu.) If so, make sure the check box in the shut down alert is checked:
-
How can I make the combo box turn to the value of black.
When the show button is pressed (and not before), a filled black square should be
displayed in the display area. The combo box (or drop down list) that enables the user to choose the colour of
the displayed shape and the altering should take effect immediately.When the show button is pressed,
the image should immediately revert to the black square, the combo box should show the value that
correspond to the black.
Now ,the problem is: after I pressed show button, the image is reverted to the black square,but I don't know
how can I make the combo box turn to the value of black.
Any help or hint?Thanks a lot!
coding 1.
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
import javax.swing.event.*;
public class test extends JFrame {
private JPanel buttonPanel;
private DrawPanel myPanel;
private JButton showButton;
private JComboBox colorComboBox;
private boolean isShow;
private int shape;
private boolean isFill=true;
private String colorNames[] = {"black", "blue", "cyan", "darkGray", "gray",
"green", "lightgray", "magenta", "orange",
"pink", "red", "white", "yellow"}; // color names list in ComboBox
private Color colors[] = {Color.black, Color.blue, Color.cyan, Color.darkGray,
Color.gray, Color.green, Color.lightGray, Color.magenta,
Color.orange, Color.pink, Color.red, Color.white, Color.yellow};
public test() {
super("Draw Shapes");
// creat custom drawing panel
myPanel = new DrawPanel(); // instantiate a DrawPanel object
myPanel.setBackground(Color.white);
// set up showButton
// register an event handler for showButton's ActionEvent
showButton = new JButton ("show");
showButton.addActionListener(
// anonymous inner class to handle showButton events
new ActionListener() {
// draw a black filled square shape after clicking showButton
public void actionPerformed (ActionEvent event) {
// call DrawPanel method setShowStatus and pass an parameter
// to decide if show the shape
myPanel.setShowStatus(true);
isShow = myPanel.getShowStatus();
shape = DrawPanel.SQUARE;
// call DrawPanel method setShape to indicate shape to draw
myPanel.setShape(shape);
// call DrawPanel method setFill to indicate to draw a filled shape
myPanel.setFill(true);
// call DrawPanel method draw
myPanel.draw();
myPanel.setFill(true);
myPanel.setForeground(Color.black);
}// end anonymous inner class
);// end call to addActionListener
// set up colorComboBox
// register event handlers for colorComboBox's ItemEvent
colorComboBox = new JComboBox(colorNames);
colorComboBox.setMaximumRowCount(5);
colorComboBox.addItemListener(
// anonymous inner class to handle colorComboBox events
new ItemListener() {
// select shape's color
public void itemStateChanged(ItemEvent event) {
if(event.getStateChange() == ItemEvent.SELECTED)
// call DrawPanel method setForeground
// and pass an element value of colors array
myPanel.setForeground(colors[colorComboBox.getSelectedIndex()]);
myPanel.draw();
}// end anonymous inner class
); // end call to addItemListener
// set up panel containing buttons
buttonPanel = new JPanel();
buttonPanel.setLayout(new GridLayout(4, 1, 0, 50));
buttonPanel.add(showButton);
buttonPanel.add(colorComboBox);
JPanel radioButtonPanel = new JPanel();
radioButtonPanel.setLayout(new GridLayout(2, 1, 0, 20));
Container container = getContentPane();
container.setLayout(new BorderLayout(10,10));
container.add(myPanel, BorderLayout.CENTER);
container.add(buttonPanel, BorderLayout.EAST);
setSize(500, 400);
setVisible(true);
public static void main(String args[]) {
test application = new test();
application.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
coding 2
import java.awt.*;
import javax.swing.*;
public class DrawPanel extends JPanel {
public final static int CIRCLE = 1, SQUARE = 2;
private int shape;
private boolean fill;
private boolean showStatus;
private int shapeSize = 100;
private Color foreground;
// draw a specified shape
public void paintComponent (Graphics g){
super.paintComponent(g);
// find center
int x=(getSize().width-shapeSize)/2;
int y=(getSize().height-shapeSize)/2;
if (shape == CIRCLE) {
if (fill == true){
g.setColor(foreground);
g.fillOval(x, y, shapeSize, shapeSize);
else{
g.setColor(foreground);
g.drawOval(x, y, shapeSize, shapeSize);
else if (shape == SQUARE){
if (fill == true){
g.setColor(foreground);
g.fillRect(x, y, shapeSize, shapeSize);
else{
g.setColor(foreground);
g.drawRect(x, y, shapeSize, shapeSize);
// set showStatus value
public void setShowStatus (boolean s) {
showStatus = s;
// return showstatus value
public boolean getShowStatus () {
return showStatus;
// set fill value
public void setFill(boolean isFill) {
fill = isFill;
// set shape value
public void setShape(int shapeToDraw) {
shape = shapeToDraw;
// set shapeSize value
public void setShapeSize(int newShapeSize) {
shapeSize = newShapeSize;
// set foreground value
public void setForeground(Color newColor) {
foreground = newColor;
// repaint DrawPanel
public void draw (){
if(showStatus == true)
repaint();Hello,
does setSelectedIndex(int anIndex)
do what you need?
See Java Doc for JComboBox. -
How can i make a soft return with pages shift enter does not work!
how can i make a soft return with pages shift plus enter does not work!!
On full keyboards with a numeric keypad, the key above the right shift is "return" & the one on the numeric section is "enter." On a Mac (or Apple IIgs ) they do have separate functions. On the "mini" keyboards, both names are on the same key, but "enter" is written in smaller letters. I'll have to check to see how that works on another Mac later today.
-
How can I make the text bigger in iCal?
How can I make the text bigger in iCal? I've looked at Preferences and View.
Sorry, did not see that you are using 10.6.7
-
How Can I replace newScale Text Strings with Custom Values?
How Can I replace newScale Text Strings with Custom Values?
How can I replace newScale text strings with custom values?
All newScale text is customizable. Follow the procedure below to change the value of any text string that appears in RequestCenter online pages.
Procedure
1. Find out the String ID of the text string you would like to overwrite by turning on the String ID display:
a) Navigate to the RequestCenter.ear/config directory.
b) Open the newscale.properties file and add the following name-value pair at the end of the file:res.format=2
c) Save the file.
d) Repeat steps b and c for the RmiConfig.prop and RequestCenter.prop files.
e) Stop and restart the RequestCenter service.
f) Log in to RequestCenter and browse to the page that has the text you want to overwrite. In front of the text you will now see the String ID.
g) Note down the String ID's you want to change.
2. Navigate to the directory: /RequestCenter.ear/RequestCenter.war/WEB-INF/classes/com/newscale/bfw.
3. Create the following sub-directory: res/resources
4. Create the following empty text files in the directory you just created:
RequestCenter_0.properties
RequestCenter_1.properties
RequestCenter_2.properties
RequestCenter_3.properties
RequestCenter_4.properties
RequestCenter_5.properties
RequestCenter_6.properties
RequestCenter_7.properties
5. Add the custom text strings to the appropriate RequestCenter_<Number>.properties file in the following manner (name-value pair) StringID=YourCustomTextString
Example: The StringID for "Available Work" in ServiceManager is 699.
If you wanted to change "Available Work" to "General Inbox", you would add the following line to the RequestCenter_0.properties file
699=General Inbox
Strings are divided into the following files, based on their numeric ID:
Strings are divided into the following files, based on their numeric ID:
String ID File Name
0 to 999 -> RequestCenter_0.properties
1000 to 1999 -> RequestCenter_1.properties
2000 to 2999 -> RequestCenter_2.properties
3000 to 3999 -> RequestCenter_3.properties
4000 to 4999 -> RequestCenter_4.properties
5000 to 5999 -> RequestCenter_5.properties
6000 to 6999 -> RequestCenter_6.properties
7000 to 7999 -> RequestCenter_7.properties
6. Turn off the String ID display by removing (or commenting out) the line "res.format=2" from the newscale.properties, RequestCenter.prop and RmiConfig.prop files
7. Restart RequestCenter.
Your customized text should be displayed.I've recently come across this information and it was very helpful in changing some of the inline text.
However, one place that seemed out of reach with this method was the three main buttons on an "Order" page. Specifically the "Add & Review Order" button was confusing some of our users.
Through the use of JavaScript we were able to modify the label of this button. We placed JS in the footer.html file that changes the value of the butt -
How can I make Web Photo Gallery with Photoshop CS6 on Mac 10.6.8?
How can I make Web Photo Gallery with Photoshop CS6 on Mac 10.6.8?
You can use Bridge to create a web photo gallery.
Here's a video that shows you how to do it:
Hope this helps!
Julia -
How can I make a bullet item with a custom Bullet character such as a check mark ?
Hi Everyone,
I'd like to make a list with Bullets, but I can find a bullet character which I am looking for. Especially I'd like to make Bullet characters available in PowerPoint, such as check mark, and others. How can I make a bullet item with a custom Bullet character or picture such as a check mark ?
Regards
CemCem777 wrote:
Hi Everyone,
I'd like to make a list with Bullets, but I can find a bullet character which I am looking for. Especially I'd like to make Bullet characters available in PowerPoint, such as check mark, and others. How can I make a bullet item with a custom Bullet character or picture such as a check mark ?
Regards
Cem
Search InDesign help for "change bullet characters" (without quotes,) and use the technique described there with the Zapf Dingbat font as suggested by Peter S.
You can also use InDesign's glyphs panel (Window > Type & Tables > Glyphs) to scroll through all the character sets in all the fonts that InDesign has access to on your system, to look for check mark characters.
After you have created a paragraph style that applies the customized check-mark-bullet that you want, every time you apply that paragraph style, the custom bullet appears. So, while it's a few steps to set up the style the first time, from then on it's automatic.
If you really need a particular bullet that's not in any font you have, you'll need to search for fonts that have check mark characters and buy one or use a free one. Caution: free fonts aren't always created to the same strict standards that commercial fonts from reputable font foundries observe; free fonts sometimes cause problems when printing or exporting to PDF. You can search Google for "fonts with check mark" (without quotes.)
HTH
Regards,
Peter
Peter Gold
KnowHow ProServices
Maybe you are looking for
-
I saw a post here regarding problems with sorting and I am having what I believe is a slightly different issue (or maybe not understanding the question). Anyway, I created a report in Crystal Reports 2008. When I did so, I added sort bindings to a c
-
i want to remove,delete some paid invoices from my account
-
Hi! I dont want to use Document management system. Can I attach *.doc, *.xls , *.pdf files to BOM ?
-
Cannot copy mp4 file to ipad 2
Can anyone shed any light on this. since upgrading iTunes to 10.5 I've been having issues copying MP4 movie files to my iPad 2. I initally thought it was due to the iPad not having ios5. have since upgraded it and am still having the issue. I get th
-
Extreme JTree.expandPath frustration
I've read through about 80 posts on this subject and cannot solve my problem. I am trying to dynamically select a node in a JTree. I'm using a custom TreeModel to model an XML file. I select the node with the following code: jTree.setExpandsSelectedP