How can I make another computer my main computer for sync use

my main computer is going to be the one that generates the change to book marks and tabs. when I first
set up sync I used a secondary computer not realizing it would be the main computer. how can i change
the status of the computers. now that all of my data has merged I need to clean it up and maintain it for
the new main computer. Thank you Miles

If your secondary system don't want to SYNC. then try the following method to stop SYNC
Type '''about:config''' in URL and search for '''services.sync.prefs.sync.''' and set the value as "fasle".

Similar Messages

How can I make a book/podcast listening playlist for a blind person?

How can I make a book/podcast listening playlist for a blind person? How can lots of content be loaded, so that no navigation is required, for hundreds of hours of enjoyment?
I wanted to create a single playlist with hundreds of hours of books and podcasts for my grandmother who is blind. Then I planned to use something like the app CarTunes which basically makes the touch screen simply a gigantic pause/play button for an already created playlist. This is perfect for a blind person. The problem: Apple no longer allows you to have a playlist with Audible Books and Podcasts. I have tried; but the podcasts and books are stripped from the playlist. It seems like all podcast and book players require navigation. (How aggravating!?)
Any help in creating hundreds of hours long spoken (selected between books and podcasts) audio content playlist for a blind person would be much appreciated!!!!

Well, good news and bad news. I found out how to tell iTunes that all my music videos are, in fact, actual "music videos" and categorize them as such. In the "Get Info" screen for a track, there is a dropdown selector where you can pick the "meta" type, such as "Music Video", "Home Video", "Movie", "TV Show", etc. This allows iTunes and iOS to think they are all music videos and play them in the same list.
Unfortunately, this is not compatable with my third party device, which is now refusing to play my music videos in a playlist and will only play them one at a time (in a single-track infinite loop no less). Very frustrating!

How can I make OSX index a network share for spotlight?

How can I make OSX index a network share for spotlight?
I am using a QNAP NAS with SMB network shares, which I mount with OS X Mavericks. They are not searchable, as far as I know because of the indexing of network share is by default not activated.
To force the OS to index them I activated this via mdutils. But this is no solutions. This makes spotlight to index the share once. But I want spotlight to index it always and keep it up to date. I have a huge amount of documents & fotographs, which is very difficult to manage without being searchable.
Unfortunately the only solution I found in the www was the mdutils-way, which seems not to work, maybe only works not for me.
I would appreciate any assistance,
Thank you,
Stefan

My thanks to everyone who has contributed to solving this problem here.
It appears that there still is NOT a good, reliable solution. Please correct me if I'm wrong.
I did find this on http://jonathansblog.co.uk/how-to-enable-spotlight-indexing-on-a-network-drive:
===================================
To enable spotlight indexing on a network drive:
# mdutil /Volumes/name -i on
To disable the indexing of a connected network drive:
# mdutil /Volumes/name -i off
To check the status of indexing on a connected network drive:
# mdutil /Volumes/name -s
===================================
And, I found this on the Synology NAS forums:
cd /Volumes
mdutil shareName -i on
mdimport -Vp ./shareName
where shareName = name of your share
I have used the mdutil /Volumes/name -i on, and it seems to work.
But, if I understand it correctly, it is a one-time indexing -- the index is NOT keep up-to-date with changes.
So, how can we keep the index up-to-date?
My thought was to schedule a Terminal file to execute each night with the mdutil code.
Would this work? If so, how would you setup a scheduled run?
Would it have to be done on each Mac that accesses the Share?

How can I make a 1-Click short cut for a specific tool in Adobe Acrobat 9 Pro?

How can I make a 1-Click short cut for Adobe Acrobat 9 Pro for the function "Create" > "PDF from Scanner" > "Black & White Document"?

No, Acrobat can't do that.

How can we make the ms-word data as read-only using java code?

How can we make the ms-word data as read-only using java code?

MVSK wrote:
By using java code i opened a file in ms-word. But the data i want to display as read-only. that means should not change it.I don't think you can do that. Display pdf documents instead.

In my computer recovery has been deleted so how can i make recovery again in my computer

how can i make recovery in my computer when recovery has been deleted

Hi,
The only way to re-create the Recovery Partition would be to reinstall the operating system using your recovery DVDs - make sure to back-up all your personal files etc first before doing this.
If you don't have these DVDs, you can order a replacement set of Recovery Discs using the link below.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00810334&cc=us&lc=en&dlc=en
If you have any problem with this link, order them directly from HP.
If you live in the US, contact HP Here.
If you are in another part of the world, start Here.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

How can I make multi partitions in my computer with Windows 7??

How can I make multi partitions in my MakBook with Windows 7??

From what I read you can't. If you used Boot Camp to partition the Macintosh hard drive so you could install Win 7 on a boot camp partition you are locked into that one partition.
If you try to RE-partition that BC partition Win 7 won't boot, and IIRC there is a possibility of OS X not booting (Not sure about that). I just went through this myself.
That's one of the big reason I have gone back to Win PCs as my main systems.
Mac's are OK but to restrictive in what you can do with the hardware, and the OS IMHO.

How can I make a folder in the TV for my home movies

How can I make a folder in the TV shows for my home movies collection? I have created a folder in the library in finder and put all the videos in there but they do not appear in itunes.
pshultz

It's best to never move iTunes media around in Finder. Add it to the Library through the iTunes interface by dragging them into the window. Once they've been added to the library, you can try using Get Info on the files in iTunes and change the tag info to make them group together. (A unique album name should do this.) If you want them to be included with TV Shows, you can try using Get Info to set the Kind to TV Show (found under the Options tab in Get Info), but I'm not sure if it will work. Otherwise, you could make a playlist and drag them into to access them all in one convenient spot.
If you add the items as noted above and they still do not appear in your library, it's probably because they are not a compatible format.
Message was edited by: Diane Wordsmith

How can I open my Windows 7 firewall just for FTP use?

I originally tried this question at the regular user forums, but after no success a Microsoft Support Engineer suggested I post here.
On my Mac, if I use FileZilla to connect to an FTP (not sFTP) server, it works fine.
However, in Windows 7 or Windows 8, if I use FileZilla or WinSCP to connect to the same server, when it gets to the point where it starts to list the remote directory I get an ECONNABORT error and get disconnected.
Here is a transcript from FileZilla:
Command:   USER douglerner
Response:   331 User name okay, need password.
Command:   PASS **********
Response:   230 User logged in, proceed.
Command:   SYST
Response:   215 UNIX Type: L8
Command:   FEAT
Response:   502 Command not implemented.
Status:   Server does not support non-ASCII characters.
Status:   Connected
Status:   Retrieving directory listing...
Command:   PWD
Response:   257 "/" is current directory.
Command:   TYPE I
Response:   200 Command okay.
Command:   PASV
Error:   Disconnected from server: ECONNABORTED - Connection aborted
Error:   Failed to retrieve directory listing
However, if I turn off the Windows firewall it works and I can use FileZilla and other FTP clients just fine.
My question is, rather than turning off the firewall altogether, how can I make an exception just for FTP, or just for FileZilla. I believe ports 20 and 21 are used depending on whether the connection is active or passive.
It isn't just me either. I was trying to help somebody else who is experiencing the exact same thing in his Windows 7. If he turns off the firewall completely FTP works. Otherwise it's the same error. He is on a different network altogether, in a different
country. Neither of us are behind proxy servers. In my case, it's just my home network.
I tried the following so far:
1. Make sure that FileZilla was listed as allowed in the firewall control panel. It was by default, so that didn't help.
2. Creating an "inbound rule" in the advanced settings for ports 20-21. That didn't help either.
Just completely turning off the firewall lets it work.
Any suggestions?
Thanks,
Doug

Hi doug,
What is your current situation? Have you solved this issue?
Here I list the several solution:
Use the network monitor the capture package related to FTP as arnavsharma mentioned.
Take a look at the article as Sebastian and Sameer Gawde mentioned.
http://technet.microsoft.com/en-US/en-en/library/dd421710%28v=ws.10%29.aspx#bkmk_1
Best regards,
Fangzhou CHEN
Fangzhou CHEN
TechNet Community Support

How can I make a movable transparent main window (HTML, not FLEX)?

Hi all-
I'm new to AIR and coming up to speed quickly. I got a sample application up and running right away and was able to give it a transparent main window so that the corners are rounded and there is no window title bar.
However, I can't figure out how to make it so the user can drag the application around their desktop when they click on it.
I've seen a few FLEX examples of this but I have to work in HTML.
Does anyone know how to set this up in HTML?
Thanks,
Nicholas

"Works pretty much as I'd expect, except clicking and dragging one of the child controls in my window (e.g. a button) moves the whole window as well."
Most user interface events (mouse up, down, etc.) "bubble" up from child elements to their parents. Since you are listening on the body element, your handler is called for every mouse down in the page since the body is the highest parent in the document.
You can either:
Attach the event listener directly to the element used to drag the window.
Check the event target property to check whether the target of the event (the element moused) is a drag control.

Once iDVD has been used to create a DVD, how can I make another copy?

This may be a rookie question, but because of my bad history with computers, I generally don't like to use too much of my hard drive. I have a lot of family videos in iMovie now, and I want to be able to make a DVD and delete the originals from my hard drive. I also want to be able to make another copy of the DVD later.
Is there a way to do that with just the Mac or is something else needed...since it seems that I am essentially burning DVDs?

If you do a 'Save As Disk Image' from within your iDVD project when you have finished it, you will be making a disk image file for that project. Disk image files are self-contained, thus all the media information is encoded into the disk image file. You can then safely delete all the photos, movies, music files that were used to create your iDVD project and still retain the ability to burn more DVDs of that project in the future.
You use Disk Utility to burn more copies.
I save disk image files for all of my iDVD projects and place those files on a large external hard drive.

How can I make a custom one-line-per-test rpt using TestStand?

I have written a 1-line-per-test report in another LabView application. How can I do the same within TestStand 4.0? I would like to display the usual information: Description, Measurement Reading & Units, Pass/Fail, Lower Limit, and Upper Limit all in a concise, one line rpt. Isn't most of this data available within TestStand?

I would have figured this to be a pretty common use case, so I was wondering if anyone has made/edited a report sequence that does this?
For example, the default report text looks something like:
UUT Report
Serial Number:                MACADDRGoesHere
Date:                         Monday, September 22, 2008
Time:                         9:48:05 PM
Operator:                     administrator
UUT Result:                   Passed
Begin Sequence: MainSequence
(C:\Projects\Corventis\1-08-01641-Corventis-Gen1 PCBA Test System\Engineering\3 - Develop\Sandbox\Report Generation Demo\Report Generation Demo_Main.seq)
V_CPU_2V5 (Device Off):        Passed
   Measurement:              0.3000
   Units:                    V
   Limits:
   Low:                   0.1000
   High:                  0.5000
   Comparison Type:          GELE (>= <=)
   Module Time:              0.0014
Memory DataBus Test POST:      Passed
   Module Time:              0.0012
V_BATT:                        Passed
   Measurement:              3.1200
   Limits:
   Low:                   3.0000
   High:                  3.2000
   Comparison Type:          GELE (>= <=)
   Module Time:              0.0009
End Sequence: MainSequence
End UUT Report
whereas I'd love something like:
UUT Report
Serial Number: MACADDRGoesHere
Date: Monday, September 22, 2008
Time: 9:48:05 PM
Operator: administrator
Execution Time: 0.2188 seconds
Begin Sequence: MainSequence
(C:\Projects\Corventis\1-08-01641-Corventis-Gen1 PCBA Test System\Engineering\3 - Develop\Sandbox\Report Generation Demo\Report Generation Demo_Main.seq)
Test Name Result Measurement Units Limit Low Limit High Comparison Type Module Time
V_CPU_2V5 (Device Off) Passed 0.3000   V   0.1000   GELE (>= <=)   0.0014
Memory DataBus Test POST   Passed   N/A N/A N/A N/A N/A 0.0012
V_BATT      Passed   3.1200   3.0000   3.2000   GELE (>= <=)   0.0009
End Sequence: MainSequence
End UUT Report
Message Edited by crelf on 09-22-2008 10:19 PM
Message Edited by crelf on 09-22-2008 10:19 PM
Copyright © 2004-2015 Christopher G. Relf. Some Rights Reserved. This posting is licensed under a Creative Commons Attribution 2.5 License.

How can I make a spectrogram from a soundwaveform using the intensity chart function?

I want to make a spectrogram for a sound waveform where the x-axis is time, the y-axis is frequency, and the intensity is amplitude. I performed a DFT on the sound waveform, then used it as an input to the intensity chart function. Every time I run my program the x-axis has a scale from 0 to 1 sec, when my sound is longer. The y-axis doesn't give me the same range of frequencies as the DFT. The intensity scale is correct. Can anyone suggest another approach? The labview example did not help since I'm not generating an array and creating the intensity chart at the same time.

Hello -
You could probably use a 3D surface graph.
I am including an attachment to show you what I mean. This example program is available here. I just made a few modifications to make it look as an intensity graph:
1. By right clicking on the graph and going to CWGraph3D >> Properties and selecting the Grid Planes tab in the Graph tab, I unchecked the grids, to show just the graph. Then, I went to the 3D tab in the Graph tab, and selected Towards X-Y Plane in the View Direction section. Click OK.
2. Then, I right clicked on the graph again and went to Advanced >> Enabled State and selected Disabled, so
that the user cannot change the orientation any more.
You can build your own plot using time and frequency as X & Y, and the amplitude will give you the color. You only need to adjust the orientation so that you can see it from �the top� and it looks like an intensity plot.
Hope this helps.
Attachments:
XYZ_Plot_Example.zip ‏57 KB

How can I pass value in status and reason for rejection using BAPI_LEAD_CREATEMULTI when creating multiple lead

Hello,
I want pass value in STATUS and Reason for rejection according to requirement when i am creating multiple lead using BAPI_LEAD_CREATEMULTI. Please help me how can i pass value. Please give some sample code that in which table i have to pass values and please also tell me INPUT_FIELDS values. Please help me
Regards,
Kshitij Rathore

Hello,
Please help me for solve this problem. I am trying to solve problem from last 4 days but i didn't get any solution.
Regards,
Kshitij Rathore

How can i make my macbook my main I tunes computer, I am wanting to get rid of an old one that holds all the songs and video's

I am getting rid of an old computer biut want to transfer all music to my macbook...my music is abouy 90gb in total...

How to use Migration Assistant to transfer files from another Mac

How can I make another computer my main computer for sync use

Similar Messages

Maybe you are looking for