How can I make invoice when down payment is bigger than item value ?

Dear all,
please, I need make invoice with bigger down payment than the item value.
How can I make invoice when down payment clearing value is bigger than the item value ?
When I do Release To Accounting, I have got a massage:
"Total of down payment to be billed too high. See billing document item XXXXX"
Please, how can I solve this problem?
Thank you
Peter

Hello,
I would like to underline that this is not a problem, but a standard, and in my opinion rightful behaviour of SAP: in a dowpayment process, when you create the invoice document, you should deduct only an amount less or equal to the invoice amount. And in the following invoices you will deduct the remaining downpayment amounts still open.
Also under al legal and fiscal point of view, I guess how would you print the invoice? With a minus value?
Best regards,
Andrea

Similar Messages

How can I make a pull down menu in I web

how can I make a pull down menu in I web?

You can't do this directly in iWeb itself and it is quite complex - you need to use third party software and it is a matter of pasting code into the html snippet in iWeb and then uploading certain things to your host/server and then connecting them. It can get quite fiddly if you don't really know what you are doing and it only takes you to upload the wrong thing and get some code wrong and your menu will not show up.
Why not ditch iWeb in favour of newer software - try EverWeb at http://www.everwebapp.com and in EverWeb you can create drop down menus from within the app and it is very easy to do.
I would change now as iWeb has not been supported by Apple or sold for the last 2 years, so now might be a good time to look elsewhere and ditch iWeb for good.
I already have and purchased EverWeb and re-built one of my sites using this app and have moved my other site to Drupal so that I can do more with it and make it a members site - this can be done more easily if you use a Content Management System like Drupal.

How can i make my ipad tv out picture bigger on samsung led tv?

How can i make my ipad 2 picture bigger when outputing on samsung LED TVwith HDMI adapter?I have been watching a film but the picture is small in the middle of the screen. Can anyone help? My TV is a Samsung UE40B7020WW.
Thanks Jim

Welcome to the Apple Community.
In the lower RH corner of iTunes is the Airplay device selctor.
Click on it, select multiple speakers and check the computer and Apple TV from the list.

How to deal with Invoice after Down Payment

HI ,
I am testing Down payment for vendor and We have activated withholding tax in our company code . I was just wonder how system will behave if we have suppose 50 % of down payment   .
Complete process is as below
Create a request in F-47 for 50 % of Invoice before Invoice comes
then Run f110 and paid to vendor
Now after this Invoice will come and get posted .
Now I have some concerns
1) I have set up Tax codes on payment and enter in f-47 can see tax amount is deducted there .
2 ) How invoice will be processed whether we will deduct whole Wh.Tax or need to set up .
3 how we will deal with rest 50% of payment
Many Thanks

Hi Preeti,
The process is as follows:-
1. 50% Down Payment on Invoice - F-47/F-48/F110
     Vendor (with SPL GL A) - Dr.   50
          To bank A/C                       45
          To TDS A/c                          5
2. Invoice booking of Vendor         - FB60
     Expenses A/C......Dr.           100
          To Vendor                         90
          To TDS                              10
3. Down Payment Clearing - F-54
         Vendor A/C..... Dr                           45
          TDS A/c .... Dr                                 5
                To Vendor With Special GL A    50
TDS also gets adjusted here ( The setting required in SPRO is that you need to tick the " Cent Invoice prop" in withholding tax type for Payment posting)
4. Vendor Payment
      Vendor Dr. 45
        To Bank      45
Regards
Kavita

How can Logic make tracks slow down like an old record slowing down?

If anyone skilled know this, I need to get my entire tracks to " slows down" as a record that just loosing the motor....I have audio tracks and some spectronics /ESX24 also in the set.
I need to make this goes down and efter 1 second to speed up again...
I am working in 48Khz and Logic 9.1.1 and 5.1 sorround.
Maybe I am missing something easy, or maybe it is are harder to get.....
Hopefully a "mastermind" can help me out!
Message was edited by: Host (to clarify subject)

Danke, thank you....!!
I was messing around with flex and felt it was not really obvious to make it there.....
I will do this!
Thanks for helping me out here!

How can I make one entity attribute change trigger another's default value?

Guys and Gals,
Using JDev 11.1.2.1.0
I have an order form which has a LOV (Customers) and an address field. The address field should contain the default address associated with the selected key in the LOV.
To do this, I have an entity (Order) with two attributes (CustomerID & Address). Address has its default value set to "adf.object.getDefaultAddress" which returns the default address for the CustomerID. This only works on initial load.
How would I make this adf.object.getDefaultAddress trigger when I select a different LOV CustomerID in the View Object?
I've tried various things but am a little confused. Is there something akin to partial triggers for entity objects?
I can provide pictures, code, etc.
Thanks,
Will

you can try this.
go the the setter method in your EntityImpl class for the LOV attribute
public void setCustomerID(Number value) {
        setAttributeInternal(CustomerID, value);
        //here call the setAddress() method
    }in your page, set the customerID autosubmit to true and make the Address field PPR the customer Id.
<af:selectOneChoice value="#{bindings.CustomerID.inputValue}"
                           id="soc1"
                           autoSubmit="true">
        </af:selectOneChoice>
        <af:inputText value="#{bindings.Address.inputValue}"
                               partialTriggers="soc1">
        </af:inputText>

How can i make the end of a text higher than the rest in 3D?

I'm designing a 3D text for the outlet store of www.badkamermarkt.nl/ and would like to know how I can make the end of the text higher than the rest in 3D.

Hi,
Can you attach a comp of what you're trying to accomplish, instead of a live link to a commercial home page?
Are you wanting to make the country code of the url bigger like this?
regards,
steve

How can I make the Dependant Dashboard Prompt to auto select first value

Hi all,
I have an City prompt and creating a presentation variable with another prompt which is limited with the City prompt. But I want the second prompt to select the very first value whenever the city prompt changes.
How can I achive this to make a prompt to auto select the first value?
OR, is there a way to create a presentation variable as a result of an SQL using the value of the prompt?
Thank you so much.
Ganim

You can definitely have a prompt with SQL referring to the presentation variable as @{pv} where pv is the Presentation Variable. Also, you could assign a default value to the prompt in question.
Please assign points if helpful/correct.

Down Payment request more than PO value

Hi All
How I can stop making a down payment Request of more amount than the P.O
Value?
I have changed the Message control and made the warning as error.....Now if
I make a downpayment more than the P.O amount in a single posting, it gives me error message. But, if I create partial payment requests against a PO, it exceeds the value of PO.
For example, suppose I have P.O of Rs 50000
and still I make two downpayments of 40,000 and 50,000 system accepts
I have tried for the user exits, BADi also, but I am unable to get a solution.
Kindly help me in finding a proper solution to this.
Regards
Debasis Panda

Hi Jaya Jaga
As per my knowledge, this is finance related Anyway, I can answer this question and please configure accordingly. Please give feed back.
Follow the Configuration Path
SPRO u2013 Financial Accounting u2013 Accounts Receivable and Accounts Payable - Outgoing Invoices/Credit Memos - Carry Out and Check Document Settings - Maintain Field Status Variants
Then Double click
(OR)
Transaction Code OBC4
Change Radio button option from Suppress to Required. Entry option in Purchase Order field. Then SAVE
Hope this can be clear.
Thanks
Vijay

How can one make the drop down list of bookmarks disappear when selecting an item?

I want the list to close automatically when selecting a bookmark to open the page (as it does with favourites in Internet Explorer 8). Is it possible to set this up or does the list always have to be closed manually?

I am closing this prompt as now I am seeing that it is getting refreshed.

How can i make a Web application with listboxes as the column value

Hi,
I have two tables,one is employeees the other is devices.(Devices is the table for department notebooks).I want to implement an applicatiion for employees in order for them to book department laptops,so everyone will know which devices are in use and book the vacant notebooks.I want to make a view,such that it has a names column with static employee names and a devices column with list boxes for every employees such that they can select pre-registered notebook labels.
Thanks for your help.
Best regards,
Edited by: ebaris on 13.Eki.2008 12:50

Hi,hello, excuse the delay, the way is the following, I assume you have Application Express.
In any page of your application click on List of Values.
Click-on to create.
Name-list: LOV_NAME.
Select-type dynamics.
With the generator creates the SQL queries.
Click on creating Values list.
Select the item you want to convert into a selection list (ComboBox).
In the Show-like property, click on the Selection List.
Click on the link LOV, select the list of values created.
Apply changes.
Roberto.

How can I make the magic mouse screen ARROW bigger?

I need to enlarge the screen ARROW from the magic mouse - it is way too small for me to find it! Is this possible?

Yes it is possible. Go into settings>accessibility>display> then adjust the cursor size slider.

How can I make a chart ignore cells until their value is changed from 0?

In the corresponding table, I used conditional formatting to hide zeros in the highlighted row by conditionally changing the text color to that of the table background. However, the zero value's are still represented in the corresponding chart as you can see in the attached photo . How can I make the chart ignore certain cells only until their values are changed from zero? Thanks in advance!
Ryan

Hi Ryan,
Leave the cells empty until they're needed, or, if the cells' contents are determined by a formula, revise the formula to insert a null string if the value is zero.
=IF(your formula = 0, "", your formula)
Regards,
Barry

I down loaded sygic on my iPhone 3s but the icon is missing even in the search but when I want to download it again ,it say this application is present, how can I make the icon to show up

I down loaded sygic on my iPhone 3s but the icon is missing even in the search but when I want to download it again ,it say this application is present, how can I make the icon to show up

- Have you tried a reset. Nothing is lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Try syncing the iPod to your computer. Then delete from iTunes and sync. that should delete it from the iPod. Then redownload it.

I have created a spreadsheet on numbers for ipad with a list of customers as a drop down menu. How can i make their address appear underneath when i select the customer?

I have created a spreadsheet on numbers for ipad with a list of customers as a drop down menu. How can i make their address appear underneath when I select the customer?
iselect the customer?

Hi bazza,
We won't be able to put the address from a formula into the same cell that you enter the customer's name. We can put the address in the cell under the customers name.
First let's take James advice and concatenate the address in the address table.
Here is the formula in G2
=CONCATENATE(B2&"
",C2&"
",D2&"
",E2)
It shows this way because after I clicked on B2 and typed [&"] (no brackets) I typed option-return
This gives you your new line. Then I typed the closing ". I repeated this for the rest of the address.
Next we want to bring this to your order sheet. I prefer using the two formulas OFFSET and MATCH instead of VLOOKUP.
base tells OFFSETwhere to start counting from. Click A1.
row-offset is for the row. we will use MATCH() -1 to give us the row.
What MATCH does is give you the row number where something is found and you can specify an exact match. I usually construct the MATCH formula first and then cut and paste it into OFFSET. MATCH looks like this: MATCH(A2,Table 1::A,0). A2 is what we are looking for, Table 1A::A is where we are looking (the entire column A), and 0 means we want an exact match. Can you see it inside the OFFSET formula? Notice that we had to subtract 1 from its result.
column-offset tells OFFSET which column A=0 so we want 6.
we ignore "rows", "colomns" we don't need them.
If this seems like too much, just break it down into small pieces.
quinn

How can I make invoice when down payment is bigger than item value ?

Similar Messages

Maybe you are looking for