How can I make it so that when I delete an e-mail on my iPhone the e-mail on my MBP is also deleted
I'm trying to figure out how to sync my mail between my iphone and my macbook pro. I am using the mac mail programs on both devices and comcast is my mail server. I would like to be able to delete on both devices at the same time. Right now when I get a new e-mail on my iphone4 and I delete it it still shows up on my macbook pro and vice versa.
Whomever providesyour email account. Would provide eitehr POP or IMAP or both. Check with your e-mail provider.
IMAP vs. POP
Similar Messages
-
How can I make it so that when Safari opens it takes me to the homepage?
Say I am on youtube and I quit safari, when I reopen safari later, it goes to the page last open, in this case, youtube. How can I make it so that when Safari opens it always takes me to the homepage?
Click on the red button (top left) to close the window before quitting.
-
I use my iPhone for work as well as personal. However for work, I have noticed that when someone rings me, for instance Bob Mansfield from Com tec, the phone screen states just 'Bob' and no other details. I have the best part of 6 Bob's in my contacts all with different surnames and company's. Is there a way that I can get my phone to show more info on the person calling. For instance, surname and company if applicable? Any help would be much appreciated.
See deggie's response in this post... https://discussions.apple.com/message/8531821#8531821
-
When I connect my ipod to my computer it opens my documents and won't show up in my itunes and I have unistalled then reinstalled itunes and reset my ipod twice and it stills does the same thing how can I make it so that it shows up in my itunes?
Try
iOS: Device not recognized in iTunes for Windows
I would start with
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
or
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
Before you reinstall the Apple software, also remove iCloud vi Control Panel Remove programs. The reinstall the Apple programs
New cable and different USB port?
Runs this and see if the results help with determine the cause
iTunes for Windows: Device Sync Tests
Try on another computer to help determine if computer or iPod problem -
How would I make it so that when "deleting" an image I can make it so that the delete key does it or a button I put on the application?
I want it so that I can use either a button on the designer window or the delete key. I know how to do the or part but the trouble I'm having is coding the button in.
if (LastImageClicked != null && (e.Key == Key.Delete || Button))
This is the code that I have in the format I'm looking for I just don't know how to do it. Thanks for your help!There are a number of things which are unclear about your question.
I'll tell you one way to approach this though.
Handle Window.PreviewKeyDown.
<Window
Window.PreviewKeyDown="Mainwindow_PreviewKeyDown"
Code behind
private void Mainwindow_PreviewKeyDown(object sender, KeyEventArgs e)
if (e.Key == Key.Delete)
File.Delete("p001.jpg");
I don't know enough about what you mean by LastImageClicked but you need some way of knowing which path you are going to delete.
Then you might well have a problem if it's showing in an image control.
You will need to copy the picture off disk into a new bitmapimage object.
If you just do
<Image Source="p001.jpg"
Then that image will grab the file and you won't be able to delete it - you'll get an error.
In my experimental code p001.jpg is set as content copy always so it ends up next to the exe in the bin when the solution compiles.
You would probably want a full path to a file there.
Hope that helps.
Recent Technet articles:
Property List Editing;
Dynamic XAML -
I updated my iphone to ios 7.1.1 and after that my contact photo when i call or call others to me is a small cycle of that picture i choose ... How can i make a big picture when i call my contant and when others call me ?
It's not clear why Apple made this change; speculation (which is not really allowed in these forums) is that it was done to protect the privacy of the caller.
-
How can I make it so that my songs don't go on her iPod and her songs ....
Me and my mother just got iPods for christmas and hers was a U2 ipod and mine was a 30gb ipod. I have downloaded some songs and have imported some cds but my mother doesn't want those songs on her ipod. How can I make it so that my songs don't go on her iPod and her songs don't go on mine.Do i need to create another itunes?
The computer can tell the difference between your two iPods. When you first plugged each one in, you named them and the computer recognizes each one as a separate disk.
Now, when you plug in your iPod, and you are looking in iTunes at your iPod contents, you will see four buttons in the bottom right corner of iTunes - the first one is to display iPod options. Click on this, and under the music tab, select "Automatically update selected playlists only". Then, you scroll through your playlists and select only those you want to be transferred to your iPod. Your mother can do the same thing. Now you can each make your own playlists from the same music library, and only those songs you want to go onto your iPod will transfer when you plug it in. You can make the same selections for all the other options too (video, podcats. photos, etc), so that you only have to have what you want on each iPod.
I have two iPods, a new 5g video iPod and an ancient 1g iPod, and have no problems syncing each of them with different playlists and options. -
How can i make it so that on messages i can see who is online wihtout having to search their name?
how can i make it so that on messages i can see who is online without having to search their name? When i had ichat i didnt have to search their name... i culd see who was online autimatically.
Firefox, the web browser, doesn't make any decisions about what mail should be considered spam or what senders should be blocked. What email software or webmail site are you using that is rejecting the messages?
If it's a common site like Yahoo! mail, Gmail, Windows Live Hotmail/Outlook.com, then perhaps a volunteer familiar with their specific settings can help.
If it's Thunderbird, the support site is over here: [https://support.mozillamessaging.com/].
If your security/privacy software filters your mail, you will want to check its settings as well. -
My free apps purchased using my cousin's apple id won't open anymore on my iphone but apps donwloaded using my own apple id still works. Why is it like that and how can I make apps purchased using my cousin's apple id work on my iphone? Help!
Welcome to the Apple Community.
Delete the apps purchased by your cousin and purchase your own. -
How can i make a photo that is 10 x 6.6 to 10 x 8 without changing the image in Photoshop CS3?
How can I make a photo that is 10 x 6.6 to 10 x 8 without changing the image in Photoshop CS3?
I could be snarky and say change the image in a different version of Photoshop, but NO...
The only way to make a photo that is one size into another size is to change the image. You have a few choices about how to change it:
One way is to simply expand the height from 6.6 to 8 inches using Image>Canvas Size, using the default setting of having the image centered and leaving the background either black or white, your preference. This will add background color to the top and bottom of your image. This won't change the image itself, but it will change its surroundings.
Another way is to resize the image using Image>Image Size, entering the new dimensions after turning off the aspect ratio lock (resample on). This will stretch the image vertically, however, so it's probably not a good option.
Finally, you could resize the image using Image>Image Size, leaving the aspect ratio lock on and resample on, and increase the height from 6.6 to 8. This will have the secondary effect of enlarging the width from 10" to a greater width. Then you crop the resulting image back down to 10" width, which involves losing some edge areas of the image. -
How can I make a button that on press the object appears and on second press the object to disappear
Hello,
I'm quite new to flash programing, and I don't know how can I make a button that will make the object appear and disappear.Till now I have this code for the appear:
on (press)
_root.top1.gotoAndStop(2);
_root.topp.gotoAndStop(2);
_root.mm1.gotoAndStop(2);
_root.m1.gotoAndStop(2);
but from here I'm stuck.
Thank you for your helpWhat you can do is use the _visible property of the object to make it appear and disappear, or more correctly, use the opoosite of the _visible property. You should not put code "on" objects, keep it in the timeline.
If "object" is the instance name of the object you want to toggle, then in the timeline code you can use...
object._visible = false; // start with the object being invisible
yourButtonName.onRelease = function(){
object._visible = !object._visible;
That one line in the function sets the object's _visible property to be the opposite of what it currently is. -
Now that I have upgraded to iOS 7, how can I make it so that I don't need a password every time I use my iPad?
In v6 airport utility "Join a wireless network" is not available once the TC is setup.
You must reset to factory and try again using the selection options.. and it can fail or not come up.. This is an extremely poor way to setup a TC.. and you should NEVER EVER DO IT.. that is why apple removed it. Since you are joining wireless it makes no difference where the TC is located.. since it would become a dumb AP and turn off its ethernet ports.
Place it right next to your main modem router, plug in by ethernet, and select bridge mode and create a wireless network. Never use Join a wireless network..
However for completeness here is the method.
How do I setup my time capsule with wireless internet?
Never ever do it.
If you need internet by wireless and backup to the TC.. then simply plug the TC directly into the Mac.
Run dual network.. Setup explained here.
Using Time Capsule hardwired to Mac for back-up only. -
How can I make a rule to mark all messages sent to Mail Trash as Read?
How can I make a rule to mark all messages sent to Mail Trash as Read?
When I look at some emails on my phone, I can see from the title that I don't need to read the email so I delete it without opening it. When I go to my Macbook Pro and open mail, the number of unread messages in my Trash shows next to the name. It drives me nuts. Can I just set a rule to mark all messages sent to trash as read? If that isn't possible, I'd take just making the number not show beside the Trash folder.Just in the case that I actually do need to go back to them for some reason. I have some OCD tendencies which is also why the number beside the folder drives me nuts.
-
How can I create a slideshow that depicts only a version of a photo rather than the original? Since the original and new versions are saved together, the aperture slideshow often choices the original rather than the desired version to display.
There are two things we use the name "Slideshow" for in Aperture: a Slideshow Album, used for making Slideshows, and the Slideshow that is made. (Imho, it is a design mistake to not call the containers used to create Slideshows, Books, etc., "Albums".)
The Slideshow will use the Album Pick from any Stack. A good way to use Aperture is to promote the Image you want to regularly use (such as, for example, a Version with adjustments) to the top of the Stack. This makes it the Stack Pick, and will be the default Album Pick. If you haven't done that, you can still change the Album Pick for any Stack in a Slideshow Album. Expand your Stack(s), select the Image in each Stack that you want to be the Album Pick (and thus shown in the Slideshow), and "Stacks➞Set Album Pick". (Note the keyboard shortcut; there is also a Toolbar icon for this.) The change is immediate. The Slideshow will always show the Album Pick (or, if there is not one, the Stack Pick) for every Stack in your Slideshow Album. -
How can I make my query to compare only columns of two tables... not the storage information?
11GR2
=-----------------------------------
I am using below querry to compare two table that has same name, under two different users... But after making storage information false like below and if the storage information is different on column level than it create "Alter modify " statements for the column ... How can I make my query to compare only columns of two tables... not the storage information?
begin
DBMS_METADATA.SET_TRANSFORM_PARAM(DBMS_METADATA.SESSION_TRANSFORM,'PRETTY', TRUE);
DBMS_METADATA.SET_TRANSFORM_PARAM(DBMS_METADATA.SESSION_TRANSFORM,'SQLTERMINATOR',TRUE);
DBMS_METADATA.SET_TRANSFORM_PARAM(DBMS_METADATA.SESSION_TRANSFORM,'SEGMENT_ATTRIBUTES', FALSE);
DBMS_METADATA.SET_TRANSFORM_PARAM(DBMS_METADATA.SESSION_TRANSFORM,'STORAGE', FALSE);
DBMS_METADATA.SET_TRANSFORM_PARAM(DBMS_METADATA.SESSION_TRANSFORM,'TABLESPACE',FALSE);
DBMS_METADATA.SET_TRANSFORM_PARAM(DBMS_METADATA.SESSION_TRANSFORM,'CONSTRAINTS',FALSE);
DBMS_METADATA.SET_TRANSFORM_PARAM(DBMS_METADATA.SESSION_TRANSFORM,'REF_CONSTRAINTS',FALSE);
DBMS_METADATA.SET_TRANSFORM_PARAM(DBMS_METADATA.SESSION_TRANSFORM,'CONSTRAINTS_AS_ALTER',FALSE);
End;
select REGEXP_REPLACE(dbms_metadata_diff.compare_alter('TABLE','TABLE_NAME_A','TABLE_NAME_A','USER1','USER2'),('USER1...'),'', 1, 0, 'i') from dualI am using below querry to compare two table that has same name, under two different users... But after making storage information false like below and if the storage information is different on column level than it create "Alter modify " statements for the column ... How can I make my query to compare only columns of two tables... not the storage information?
If you want help you have to SHOW us what you are doing and how you are doing it; you can't just try to tell us in your own words.
We can't see your computer screen.
Maybe you are looking for
-
My ipod touch wont restore. i get error 21 message Why?
-
ITunes can't find my music files
It appears all my songs have lost the path to their music files. The error message says "cannot find the original file do you want to locate it?" When I look in the Music folder they appear in the artist's folder but still will not play. Any suggesti
-
Unable to register one extract,but the other twos are ok.
Enviroment: OS:Windows Server 2003 64bit GG: Oracle GoldenGate Command Interpreter for Oracle Version 11.2.1.0.6 16211226 OGGCORE_11.2.1.0.6_PLATFORMS_130418.1829 Windows x64 (optimized), Oracle 11g on Apr 19 2013 17:38:40 There are three extract on
-
NullPointer when getting pageFlow bean from backingBean
Hi, I use JDev11g - full ADF stack. In the backing bean of a page, I use this method : public QueryFilterBean getFilterBean() { FacesContext fc=FacesContext.getCurrentInstance(); return (QueryFilterBean) fc.getApplication().getExp
-
My camera is not working on my HTC One (M8). Iv'e tried unistall/re-install, restarting, clearing cache, force stop, and the software is up to date. Any other ideas?