How can I make multiple quizzes with their own results slides within one project of Captivate 7?

In one Captivate 7 project I want to create multiple quizzes with their own results slide.
Currently I have 5 quizzes that all are linked to 1 results slide.
Is there a way to give each set of questions their own results slide?
(I saw a response to a similar question for Captivate 5 from 2012, but I couldn't get much use out of is and I figured there was an easier way in Captivate 7).
Any help would be appreciated!
Thanks!

Thanks for the reply Lilybiri!
I checked out the link and it's useful, however your other plan might work better for me:
Either you link to separate CP-files that have each their quiz, or you can show intermediate results slides (see link below), but you have to know that the score that will be transmitted to a LMS is the total score of all the quizzes.
But how exactly do I link separate CP-files? Do I have to publish them first and then link them, or can I link them before I publish?
If you could shoot me a link or some advice I'd greatly appreciate it. I'm finishing up a huge project that is due at the end of the day and this quiz issue is one of the last things keeping me from being finished.
Thanks!

Similar Messages

How can I make multiple quizzes within one Captivate project?

Hi guys! Really liking Captivate 5.5, especially the way random question slides can lift questions out of a question pool...very elegant!
Sadly though, I've come up against a bit of a wall. In my project, I want to have 3 separate quizzes that all use the same question pool; a 10, 30 and 50 question-long quiz. Each one needs to have its own results page.
It's easy enough to see what I mean by looking at the screenshot below:
The idea was to have about 105 slides in total, with slides 10 - 20 being the 10 quiz slide, 21 - 51 being the 30 question quiz and 52 - 102 being the 50 question quiz.
There are three invisible buttons placed over those 10, 30, 50 text boxes. In the picture, the '10 question' button would jump to slide 10, the '30 question' button would jump to slide 21, and the '50 question' button would jump to slide 52, jumping the user to the start of their designated tests.
Though I can create the 10 random question "block" easy enough, when it comes to adding the 30 question "block" it just adds the new random questions to the existing random questions. I want three separate quizzes, each with their own results screens please. (I don't want to daisy-chain to external projects, because the results of each test need to be used within the homepage.)
It just adds them on to the existing block!! Argh!!
Little bit ticked off with Adobe...the reason their products are so incredible is because they put no constraints on the user, and you can use their tools to create things even the developers never dreamed of. Like in Photoshop for example, I bet when the dropshadow fx was created, the developers never realised that it would be used to give a metallic 'stamped' look to text by turning it to white and applying it just inside the text.
Captivate, though amazing most of the time, has a nasty habit of stomping on my toes. You can't set grade boundaries and have quizzes give out grades A+ to F- for example. You can only have 'pass' and 'fail', thus making it rather pointless for use in schools, contrary to how the program is advertised. Another example would be when I wanted to create a replay button. I thought that a button that jumped to the slide it was on would be a simple, no-BS replay button, but for some reason you can't make a button jump to its current slide. I downloaded a widget that worked in the end, but I wish Adobe would get off my back and let me do what I want!
Anyway, if you could help me out here it would be grand

I must say I have a little sympathy for the Captivate developers on this occasion. As you say, they've created an application that does so much, that when you eventually run into a hard boundary of some kind, the effect is somewhat jarring. However, every application, no matter how good, has limits. I'm probably one of the worst offenders when it comes to asking the Adobe Captivate Development Team for enhancements (I think I've logged over 70 enhancement requests for Captivate 6 alone).
In your case, you want to have three different quizzes in one project file, each with it's own separate Quiz Results page. Lilybiri's blog explains how to set up your own faux Quiz Results pages using system variables and custom user variables, but you're going to find this to be quite a lot of trouble. Even if YOU want to consider these as three separate quizzes, as far as Captivate is concerned they're just one big quiz with 50 questions. So Captivate will calculate it's internal results based on a 50 question quiz, even if your users select the 10 question version. So achieving a final Pass/Fail result is going to be problematic at best.
As Lilybiri suggested, your better strategy would be to break this up into separate modules so that you can get your three separate quiz results (all done in standard Captivate) as well as correct results based on the actual number of questions done by the user.
As far as grades A-F is concerned, there's nothing to stop you from using Advanced Actions and User Variables to calculate the user's score as a grade. You need a user variable that stores the user's grade (e.g. var_Grade). And you need a fairly complex Conditional Advanced Action (e.g. caa_CalculateGrade) with several clauses each of which goes something like:
If
cpQuizInfoPointsscored is lesser or equal to [highest score for a particular grade]
AND
greater or equal to [lowest score for a particular grade]
Actions
Assign var_Grade with [the appropriate grade for that range of scores]
Your conditional action will need one of these clauses for each separate grade. Once your variable has been assigned a grade based on the user's score, you can display it in a text caption somewhere on the quiz results page or on a slide thereafter with suitable commendations/ commiserations.

How can I make PSE open with a blank slate - nothing in the Projects Bin?

When I open PSE 10, I want and expect a blank workspace. But when PSE opens, the last open file always appears, even if I saved or closed it before closing PSE.
I don't see any pref to correct this, and I shouldn't have to close a file before I can begin working.

This is a lion thing, not a PSE thing. First go to system preferences>General and turn off restore windows:
Then go to your username>library>saved application states and delete the one(s) for PSE. You will need to option-click the Go menu in the Finder to see this library, since it's normally hidden in Lion.
EDIT If you want to turn it off only for PSE, it doesn't work that way. You will need to delete the saved state every time you want to start PSE if you don't want to disable this feature for all programs.

How can I make multiple pictures slowly fade to white in FCP X ?

I am new to FCP X and I'm creating a picture slideshow. How can I make multiple pictures slowly fade to white in FCP X ?
For example, I would like to have 10 pictures all play in 5 seconds, and starting off with the 1st one being little light; 2nd lighter; 3rd lightter; etc., to 10th being completly white screen...
Can anyone help ?

Here is what I would do. Add a 5 second white generator solid to your storyline. Add your 10 half second clips as attached clips. Select them all, right click and make a compound clip. Then keyframe the compound clips opacity from 100% t0 0% with one keyframe at the beginning and one at the end. That will give you a linear reduction in opacity over the 5 seconds(10 pics). You can play with the keyframes to get the effect you want if linear isn't doing it.

I have a large number of photos imported into iPhoto with the dates wrong. How can I adjust multiple photos (with varying dates) to the same, correct, date?

I have a large number of photos imported into iPhoto with the dates wrong. How can I adjust multiple photos (with varying dates) to the same, correct, date?

If I understand you correctly, when you enter a date in the Adjust Date and Time window, the picture does not update with the date you enter. If that is the case then something is wrong with iPhoto or your perhaps your library.
How large a date change are you putting in? iPhoto currently has an issue with date changes beyond about 60 years at a time. If the difference between the current date on the image and the date you are entering is beyond that range that may explain why this is not working.
If that is not the case:
Remove the following to the trash and restart the computer and try again:
Home > Library > Caches > com.apple.iphoto
Home > Library > Preferences > com.apple.iPhoto (There may be more than one. Remove them all.)
---NOTE: to get to the "home > library" hold down option on the keyboard and click on "Go" > "Library" while in the Finder.
Let me know the results.

How can I return multiple values with PL/SQL Web Services

Hi,
I'm new to developping Web Services. I'm doing some tests with JDeveloper and OC4J on my local machine with a Web Services based on a PL/SQL function within a package. Right now that function only returns one value. So the xml response only has one output.
I'd like to know how can I return multiple values with my PL/SQL Web Service. For example, if I want to return an employee's name and id? And that the xml contains two output : <employee>, <empid>?
Reginald
ps : I have searched the forum and I couldn't find an answer to this question, if that has been discussed AND answered before, can you please post the link? Thanks

Alright, I actually found my answer. Since this was asked I think as a followup somewhere else I'll give my answer.
It is very simple, all you have to do is create an Object Type and then Return that object type. After that, JDeveloper will take care of everything and you will have an xml response with multiple values. Here
{color:#ff0000}
create or replace TYPE person AS OBJECT
( id_interv number,
first_name VARCHAR2(50),
last_name VARCHAR2(50),
date_birth date
);{color}
Then your function used in your Web Service should look something like this :
{color:#ff0000}
function info_emp (p_empno IN VARCHAR2) RETURN person AS
l_emp person := person(-1,'','','');
BEGIN
SELECT first_name
,last_name
,emp_no
INTO l_emp.first_name
,l_emp.last_name
,l_emp.emp_no
FROM emp
WHERE upper(emp_no) = upper (emp_no);
{color}
{color:#ff0000}
RETURN l_emp;
EXCEPTION WHEN NO_DATA_FOUND THEN
l_emp := person (-1,'n/a','n/a','n/a');
RETURN l_emp ;
END info_emp;{color}
{color:#ff0000}{color:#000000}After that, this is what the xml response looks like :{color}{color}
<first_name xsi:type="xsd:string">John</first_name>
<last_name xsi:type="xsd:string">Doe</last_name>
<emp_no xsi:type="xsd:string">0250193</emp_no>

How can I edit multiple clips with different frame rates on the same timeline

how can I edit multiple clips with different frame rates on the same timeline

You do not want to edit material from different frame rates on one timeline. You CAN do this, but it is a very bad idea - and this is why.
Once you establish the sequence frame rate - lets say it is PAL material at 25fps, any material that you drop into the sequence other than 25 fps will have to be changed to play at 25 fps. If the material you add is NTSC (29.97), FCP will DROP 5 frames per sec to bring the frame rate down to 25 fps. Which 5 get thrown away? Every 6th one. This yields a funky cadence that becomes even more complex as as there are also interlaced fields (DV/NTSC is an interlaced format). Oh, and by the way, the image sizes are different as well. DV/PAL has 576 lines of resolution and DV/NTSC has 480. FCP has to scale up the NTSC to fit the PAL frame.
You do not want FCP adjusting these things on the fly. You want to do a thoughtful (and time consuming) conversion so that you end up with all your material in one format with the best possible image from the conversion process. Compressor can do an adequate job with Frame Controls turned on. The Natress Standards Conversion FCP plugin is another way to go. A third option is to find a post house that can do the conversion for you using a hardware based process.
The good news is, once everything is in the same format, editing it will be painless and the output process very quick.
Whatever frame rate/ image size you select, I'd suggest using ProRes for the codec. It is 4:2:2 color and will withstand color correction and composting with much more grace than any variant of DV based codecs.
Have fun.
x

How can i make audio player with osmf??

i want to know how can i make audio player with osmf and flex4.5 ?

Thanks again...I suppose I'd just like it louder in case the radio is on when the directions are given. The difference between the iPhone & Nokia is like night & day!
BTW, do you know if the Maps program is using data from my cell phone plan as we drive? Or are the corresponding maps downloaded into the phone once for the trip?
Thanks again!!

How can I make textedit start with a new (blank) document?

How can I make textedit start with a new (blank) document?
Instead of it starting up with a dialogue box to select an existing or start a new document.

@Alley_Cat thanks for the ideas.
I turned off System Preferences > iCloud > Documents&Data - problem solved.
I'll use DropBox instead - it provides the options for a better experience. I hope Apple keep working on iCloud so that it doesn't go the way of Moble Me.

How can I make the popup with empty fileds and create new record?

I would like to use a popup to create new record.
I created a af:popup by drag and drop a VO from data control to jsff. then, I created a button and place a af:showPopupBehavior. I was able to popup window by click the button.
however, the window filled with the information from the 1st record. and when I select a record in table and click popup, the popup is filled with that record.
How can I make the popup with empty fileds and create new record by saving the popup?
Thanks

You can have edit and new buttons, in the PopupFetchEvent identify button source (using popupFetchEvent.getLaunchSourceClientId()) if new button clicked clear the binding using below code.
If you want to see empty fields, in the popup PopupFetchEvent clear the input component bindings.
resetBindingValue("#{bindings.<componentid>.inputValue}", null);
    public static void resetBindingValue(String expression, Object newValue) {
        FacesContext ctx = FacesContext.getCurrentInstance();
        Application app = ctx.getApplication();
        ExpressionFactory elFactory = app.getExpressionFactory();
        ELContext elContext = ctx.getELContext();
        ValueExpression valueExp = elFactory.createValueExpression(elContext,expression,Object.class);
        Class bindClass = valueExp.getType(elContext);
        valueExp.setValue(elContext,newValue);
    }

How can I make a slideshow with pictures and burn it to a dvd? what program to use?

how can i make a slideshow with my pictures and then burn it to a dvd?

Apple's builtin "iPhoto" application can do that easily. Open iPhoto and click on "Help" at the top of the screen for assistance in creating it.
Hope this helps

I have created a Muse site for a client that wishes to host with Business Catalyst. How do I publish the site with their account rather than using one of my free sites?

I have created a Muse site for a client that wishes to host with Business Catalyst. How do I publish the site with their account rather than using one of my free sites? This is so I can keep my free ones for personal projects but also so they can pay for their own hosting. I am happy to set it all up for them but not sure what to do.

Hi
You can use their BC login details and use them , which on publish the site will be under their account.
Please change the BC login from Edit > Preferences > Publish > Switch Accounts , for Mac it would Adobe Muse > Preferences
Thanks,
Sanjit

HT2534 how can my daughter and i have our own itunes accounts on one computer because it automatically logs on with mine?

how can my daughter and i have our own itunes accounts on one computer because it automatically logs in with mine?

Hi theirmimi,
Go to Manage your Apple ID (on a computer) and sign in with your Apple ID. Then you can edit the email information on your account:
https://appleid.apple.com/cgi-bin/WebObjects/MyAppleId.woa/
Cheers,
GB

How can i plot a histogram with using the results of Line Length

PLS HELP.How can i prepare a histogram with using the results of line length code(It is somewhere in the middle).
This is a final exam take-home question. I would appreciate if you can help?
import java.awt.*;
import java.awt.event.*;
import java.io.*;
import javax.swing.*;
import java.text.*;
import java.io.File;
public class WordAnalyser extends JFrame implements ActionListener
private JMenuItem jmiAc, jmiSil, jmiCikis, jmiAnaliz, jmiHakkinda, jmiKullanim;
private JTextArea jta1, jta2;
private JFileChooser jFileChooser = new JFileChooser();
File hafizada;
File aktarilan = new File("Sonuc.txt");
// Main method
public static void main(String[] args)
WordAnalyser frame = new WordAnalyser(); /* Ana ekran olusturulur */
frame.setSize(400, 300); /* Degerleri belirlenir */
frame.setVisible(true); /* Gorunebilirligi ayarlanir */
frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
public WordAnalyser()
setTitle("Serkan Ozgen Dosya Inceleme Programina Hos Geldiniz");
JMenuBar mb = new JMenuBar();
setJMenuBar(mb);
JMenu fileMenu = new JMenu("Dosya");
fileMenu.setMnemonic('F');
mb.add(fileMenu);
JMenu helpMenu = new JMenu("Degerlendirme");
helpMenu.setMnemonic('H');
mb.add(helpMenu);
JMenu kullanimMenu = new JMenu("Kullanim Kilavuzu");
mb.add(kullanimMenu);
fileMenu.add(jmiAc = new JMenuItem("Ac", 'A'));
fileMenu.add(jmiSil = new JMenuItem("Sil", 'S'));
fileMenu.add(jmiCikis = new JMenuItem("Cikis", 'C'));
helpMenu.add(jmiAnaliz = new JMenuItem("Analiz", 'D'));
helpMenu.add(jmiHakkinda = new JMenuItem("Hakkinda", 'H'));
kullanimMenu.add(jmiKullanim = new JMenuItem("Kullanim"));
getContentPane().add(new JScrollPane(jta1 = new JTextArea()), BorderLayout.CENTER);
getContentPane().add(jta2 = new JTextArea(), BorderLayout.SOUTH);
jmiAc.addActionListener(this);
jmiSil.addActionListener(this);
jmiCikis.addActionListener(this);
jmiAnaliz.addActionListener(this);
jmiHakkinda.addActionListener(this);
jmiKullanim.addActionListener(this);
public void actionPerformed(ActionEvent e)
String actionCommand = e.getActionCommand();
if (e.getSource() instanceof JMenuItem)
if ("Ac".equals(actionCommand))
Ac();
else if ("Sil".equals(actionCommand))
Sil();
else if ("Cikis".equals(actionCommand))
System.exit(0);
else if ("Analiz".equals(actionCommand))
sayim();
else if ("Hakkinda".equals(actionCommand))
JOptionPane.showMessageDialog(this,
"!!!! Bu program text analizi gerceklestirir. Her hakki saklidir SERKAN OZGEN!!!!",
"Bu program hakkinda",
JOptionPane.INFORMATION_MESSAGE);
else if ("Kullanim".equals(actionCommand))
     JOptionPane.showMessageDialog(this,
     " Ilk once dosya menusunden Ac i tiklayarak analiz etmek istediginiz Dosyayi seciniz (Lutfen uzantisi *.txt \nveya *.log olsun). Daha sonra Degerlendirme menusunden analizi tiklarsaniz dosyanizda kac adet rakam, harf, \ncumle ve kelime oldugunu gorebilirsiniz. Simdiden kolay gelsin",
     "Programin kullanim detaylari",
     JOptionPane.INFORMATION_MESSAGE);
private void Ac()
if (jFileChooser.showOpenDialog(this) == JFileChooser.APPROVE_OPTION)
hafizada = jFileChooser.getSelectedFile();
Ac(hafizada);
// Acilan Dosyayi ana ekranda gostermeye yariyan bir method
private void Ac(File file)
try
// Acilan dosyayi okuma ve ana ekranda gosterme
BufferedInputStream in = new BufferedInputStream(new FileInputStream(file));
byte[] b = new byte[in.available()];
in.read(b, 0, b.length);
jta1.append(new String(b, 0, b.length));
in.close();
catch (IOException ex)
// Temizle tusunun hangi ekranlara etki edecegini secme
private void Sil()
jta1.setText("");
jta2.setText("");
private void sayim()
int buff;
int sayac = 0;
int Cumleler = 0;
int Kelimeler = 0;
int Karakterler = 0;
int Satirlar = 0;
int Rakamlar = 0;
boolean start = true;
int linenum = 0;
try
FileInputStream instream = new FileInputStream(hafizada);
FileOutputStream outstream = new FileOutputStream(aktarilan);
     BufferedReader infile = new BufferedReader(new InputStreamReader(new FileInputStream(hafizada)));
PrintStream out = new PrintStream(outstream);
     out.println("---Kelime Avcisinin Sonuclari---");
     String line = infile.readLine();
     while (line != null){
     int len = line.length();
     linenum++;
     line = infile.readLine();
     out.println("Line Length :"     + linenum + "\t" +len);
while ((buff=instream.read()) != -1)
switch((char)buff)
case '?': case '.': case '!': /* Eger "?", "." veya "!" gorurse program cumleleri ve kelimeleri arttirir*/
if (start == false)
Cumleler++;
Kelimeler++;
start = true;
break;
case ' ': case '\t': case ',': case ';': case ':': case'\"': case'\'': /* Eger /t,;:\ ve \" bu isarteleri goruruse program kelimeleri arttirir */
if (start == false)
Kelimeler++;
start = true;
break;
          case 'n': case '\n': /* Eger \n gorurse satirlari arttirir */
          if (start == false)
               Satirlar++;
               Kelimeler++;
               start = true;
          break;
default:
if (((char)buff >= 'a' && (char)buff<='z')|| /*a-z, A-Z veya - degerlerini gorurse karakterler arttirilir */
((char)buff >= 'A' && (char)buff<='Z')||
((char)buff == '-'))
Karakterler++;
if ((Kelimeler % 50) == 49)
if (start == true)
               out.println();
out.print((Kelimeler+1) + " ");
out.print((char)buff);
start = false;
          if ((char)buff >='0' && (char)buff <='9') { /* 0-9 gorurse rakamlari arttiri */
               Rakamlar++; }
}// switch
     }//while
instream.close();
out.println();
out.println();
out.println("Karakter sayisi: " + Karakterler);
     out.println("Kelime sayisi: " + Kelimeler);
out.println("Cumle sayisi: " + Cumleler);
     out.println("Satir sayisi: "+ Satirlar);
     out.println("Rakam sayisi: "+ Rakamlar);
outstream.close();
try
BufferedInputStream in = new BufferedInputStream(new FileInputStream(aktarilan));
byte[] b = new byte[in.available()];
in.read(b, 0, b.length);
jta2.append(new String(b, 0, b.length));
in.close();
catch (IOException ex)
catch (Exception e)
System.out.println(e);
}

Why is it that you're not interested in IOExceptions?
catch (IOException ex)
} Empty catch blocks is a hallmark of foolish Java code. At least print out the stack trace.
%

How can I make the iPhone podcast app automatically stop playing after one episode?

How can I make the iPhone podcast app automatically stop playing after one episode?

When playing a song, are the controls at the top of the screen there? (Genius, Shuffle, Loop?)
If not, tap the center of the page once to expose them
now keep tapping the circle on the left part of the exposed controls untill a one (1) appears...

How can I make multiple quizzes with their own results slides within one project of Captivate 7?

Similar Messages

Maybe you are looking for