How can I make multiple TV episodes play continuously?

My child likes the show "Peppa Pig" but the episodes are only 10 mins long. I'm tired of hitting a button every 10 minutes so how can I queue up several tv shows to play uninterrupted?

Does anyone have an answer to this?!? ios7 is killing me!! My kiddo needs consecutive play in the car too :(

Similar Messages

How can I make multiple pictures slowly fade to white in FCP X ?

I am new to FCP X and I'm creating a picture slideshow. How can I make multiple pictures slowly fade to white in FCP X ?
For example, I would like to have 10 pictures all play in 5 seconds, and starting off with the 1st one being little light; 2nd lighter; 3rd lightter; etc., to 10th being completly white screen...
Can anyone help ?

Here is what I would do. Add a 5 second white generator solid to your storyline. Add your 10 half second clips as attached clips. Select them all, right click and make a compound clip. Then keyframe the compound clips opacity from 100% t0 0% with one keyframe at the beginning and one at the end. That will give you a linear reduction in opacity over the 5 seconds(10 pics). You can play with the keyframes to get the effect you want if linear isn't doing it.

How can I make my Apple tv play the music I am listening on my iMac?

How can I make my Apple tv play the music I am listening on my iMac? The idea is having same music in two rooms.

Welcome to the Apple Community.
In the lower RH corner of iTunes is the Airplay device selctor.
Click on it, select multiple speakers and check the computer and Apple TV from the list.

I need to play a song on a Keynote presentation, how do I do this ? I use to drag and drop the mp3 in Keynote but it stops playing when the slide move to the other one... how can I make the song keep playing through the whole presentation ? Thanks.

I need to play a song in a row in a Keynote presentation, how do I do this ? I use to drag and drop the mp3 in Keynote but it stops playing when the slide move to the other one... how can I make the song keep playing through out the presentation ?
Thanks.

Drag the file into the audio window in the Document inspector...

How can I combine multiple animations. (Play another animation after one has finished with a click?)

How can I combine multiple animations. (Play another animation after one has finished with a click?) Like a slideshow but with animations. any ideas?

You can do this by calling up the different edge Animate composition html pages using buttons and an iframe:
To get a general idea, put this in the body of an html page and insert your own URLs where indicated
<iframe id="iframeID" src="yourFirstURL" width="640" height="480">
<p>Your browser does not support iframes.</p>
</iframe>
<button onclick='loadIframe("iframeID", "firstAnimURL")'>First Animation</button>
<button onclick='loadIframe("iframeID", "secondAnimURL")'>Second Animation</button>
<button onclick='loadIframe("iframeID", "thirdAnimURL")'>Third Animation</button>
<script>
function loadIframe(iframeID,url) {
//alert("Hello");
document.getElementById("iframeID").src = url;
</script>
Peter Small

How can we make quick time player play all formats like AVI, MKV, MPEG etc?

How can we make quick time player play all formats like AVI, MKV, MPEG etc?

QuickTime supports many different file types & codecs, but not all. In many cases you can lookup, download & install specific codecs if you need them.
The following may be helpful:
Perian
QuickTime: About Playing AVI Files
QuickTime X: Playback of MPEG2 video
QuickTime 7.6.6 (you may need this if QT X won't play old videos)
QuickTime MPEG2 Playback Component (for QT 7.x)
Windows Media Components for QuickTime
Flip4Mac Player/Pro/Studio/StudioProHD

How can I make my tv series play consecutively?

I set my ipad up for my daughter while traveling. Before this new update I was able to select a tv series I purchased from ITunes and select the first episode and it would just play through till the last episode. Now with the new update it will only play one at a time! How can I play an entire series from beginning to end? I have tried making a play list in iTunes but it won't let me use my tv series I have purchased only home videos on the ipad. Please help!! (My daughter is spoiled and has become used to traveling with tv playing it easier this way)

Does anyone have an answer to this?!? ios7 is killing me!! My kiddo needs consecutive play in the car too :(

How can I make multiple computers share one iBooks library?

I have several computers with which I sync my iPad. I loaded a bunch of PDFs into iBooks onto my iPad from one of them *but* the PDFs do not show up in the iBooks library on the other computers. If I click on "Sync Books" on one of hte others it asks me if I want to remove all the existing books on the iPad which I most certainly do not. How can I keep the iBooks library in sync on these multiple computers?

Books and pdfs aren't synced. Bookmarks, highlights and collections can be synced across devices. pdfs downloaded onto an iPad can be transferred to a computer when connected using the USB cable.
iTunes Store: Transfer purchases from your iOS device or iPod to a computer

How can I make multiple quizzes within one Captivate project?

Hi guys! Really liking Captivate 5.5, especially the way random question slides can lift questions out of a question pool...very elegant!
Sadly though, I've come up against a bit of a wall. In my project, I want to have 3 separate quizzes that all use the same question pool; a 10, 30 and 50 question-long quiz. Each one needs to have its own results page.
It's easy enough to see what I mean by looking at the screenshot below:
The idea was to have about 105 slides in total, with slides 10 - 20 being the 10 quiz slide, 21 - 51 being the 30 question quiz and 52 - 102 being the 50 question quiz.
There are three invisible buttons placed over those 10, 30, 50 text boxes. In the picture, the '10 question' button would jump to slide 10, the '30 question' button would jump to slide 21, and the '50 question' button would jump to slide 52, jumping the user to the start of their designated tests.
Though I can create the 10 random question "block" easy enough, when it comes to adding the 30 question "block" it just adds the new random questions to the existing random questions. I want three separate quizzes, each with their own results screens please. (I don't want to daisy-chain to external projects, because the results of each test need to be used within the homepage.)
It just adds them on to the existing block!! Argh!!
Little bit ticked off with Adobe...the reason their products are so incredible is because they put no constraints on the user, and you can use their tools to create things even the developers never dreamed of. Like in Photoshop for example, I bet when the dropshadow fx was created, the developers never realised that it would be used to give a metallic 'stamped' look to text by turning it to white and applying it just inside the text.
Captivate, though amazing most of the time, has a nasty habit of stomping on my toes. You can't set grade boundaries and have quizzes give out grades A+ to F- for example. You can only have 'pass' and 'fail', thus making it rather pointless for use in schools, contrary to how the program is advertised. Another example would be when I wanted to create a replay button. I thought that a button that jumped to the slide it was on would be a simple, no-BS replay button, but for some reason you can't make a button jump to its current slide. I downloaded a widget that worked in the end, but I wish Adobe would get off my back and let me do what I want!
Anyway, if you could help me out here it would be grand

I must say I have a little sympathy for the Captivate developers on this occasion. As you say, they've created an application that does so much, that when you eventually run into a hard boundary of some kind, the effect is somewhat jarring. However, every application, no matter how good, has limits. I'm probably one of the worst offenders when it comes to asking the Adobe Captivate Development Team for enhancements (I think I've logged over 70 enhancement requests for Captivate 6 alone).
In your case, you want to have three different quizzes in one project file, each with it's own separate Quiz Results page. Lilybiri's blog explains how to set up your own faux Quiz Results pages using system variables and custom user variables, but you're going to find this to be quite a lot of trouble. Even if YOU want to consider these as three separate quizzes, as far as Captivate is concerned they're just one big quiz with 50 questions. So Captivate will calculate it's internal results based on a 50 question quiz, even if your users select the 10 question version. So achieving a final Pass/Fail result is going to be problematic at best.
As Lilybiri suggested, your better strategy would be to break this up into separate modules so that you can get your three separate quiz results (all done in standard Captivate) as well as correct results based on the actual number of questions done by the user.
As far as grades A-F is concerned, there's nothing to stop you from using Advanced Actions and User Variables to calculate the user's score as a grade. You need a user variable that stores the user's grade (e.g. var_Grade). And you need a fairly complex Conditional Advanced Action (e.g. caa_CalculateGrade) with several clauses each of which goes something like:
If
cpQuizInfoPointsscored is lesser or equal to [highest score for a particular grade]
AND
greater or equal to [lowest score for a particular grade]
Actions
Assign var_Grade with [the appropriate grade for that range of scores]
Your conditional action will need one of these clauses for each separate grade. Once your variable has been assigned a grade based on the user's score, you can display it in a text caption somewhere on the quiz results page or on a slide thereafter with suitable commendations/ commiserations.

How can i make multiple oracle homes co-exsist on windows

I have a windows box on which I have just installed oracle 9i and 10g.
Whenever I connect through the sqlplus , it defaults to the first one installed which is oracle10g every attempt to connect to the second database which is 9i keeps coming with “ORA-12154: TNS: could not resolve the connect identifier specified”
I know on unix I can easily set my environment, I will like to know how to get my environment set on windows for me to connect easily to the two databases.
Thank you for your time
bekky

Yes, they must be in different homes. The 'definition' of an ORACLE_HOME is the software for one product at one version/patch-level.
The easiest way to do what you want - search for all the TNSNAMES.ORA files and make them the same. They will be in each ORACLE_HOME/network/admin directory.
If you intend to have multiple homes for a while, the smartest way (IMO) to do what you want is to study the custom installation capabilities of the 10g installer and install just a listener in a new ORACLE_HOME. Then add a TNS_ADMIN variable to point to the central LISTENER and TNSNAMES.ORA and keep just that one TNSNAMES.ORA file up to date.
Takes a lot more effort up front but is easiest administrative effort in the long run. There is a lot of information in the Oracle Network User's Guide and Reference at http://www.oracle.com/pls/db102/homepage

How can I make multiple backups for other mac computers?

I have multiple mac computers and I need to know how to make separate backup disks for them.

http://pondini.org/TM/33.html
Related thread here from a year ago
Multiple Time Machine Backups On A Single NAS Device

How can I make multiple quizzes with their own results slides within one project of Captivate 7?

In one Captivate 7 project I want to create multiple quizzes with their own results slide.
Currently I have 5 quizzes that all are linked to 1 results slide.
Is there a way to give each set of questions their own results slide?
(I saw a response to a similar question for Captivate 5 from 2012, but I couldn't get much use out of is and I figured there was an easier way in Captivate 7).
Any help would be appreciated!
Thanks!

Thanks for the reply Lilybiri!
I checked out the link and it's useful, however your other plan might work better for me:
Either you link to separate CP-files that have each their quiz, or you can show intermediate results slides (see link below), but you have to know that the score that will be transmitted to a LMS is the total score of all the quizzes.
But how exactly do I link separate CP-files? Do I have to publish them first and then link them, or can I link them before I publish?
If you could shoot me a link or some advice I'd greatly appreciate it. I'm finishing up a huge project that is due at the end of the day and this quiz issue is one of the last things keeping me from being finished.
Thanks!

TS1389 How can I make a song automatically play when I turn my Mac Mini?

I want for my computer to play a song automatically when I turn my computer on. Is this possible?

As long as you don't mind doing a little post publish editing of your .js files, it's fairly easy to do. You will find them in this path on your iDisk, using the Go menu in Finder:
Go/iDisk/MyiDisk/Sites/iWeb/Nameofsitefolder/Page_filesFolder/Page.js
Open the .js files for that particular page on your iDisk with any text editor (I like Taco, and it's free) and make the following changes to the script code that controls your movie: (you will find the movie code near the top of the page in the .js file)
Change autoplay="false" to autoplay="true"
Change loop="false" to loop="true"
Changing controller value="true" to controller value="false" will remove the controller from the page entirely. Make these changes in both sets of tags, (object and embed).
Make the changes and just "Save". Clear your browser cache and you should see the changes take effect immediately. Bear in mind you will have to make this modification each time you republish your site. You can also save this modified .js file and replace the republished file with it, as long as no other changes were made to the page in iWeb.
-Mark

How can I make multiple PDF links open in the same second tab, instead of a 3rd, 4th etc.

I am working on a project for my Universities 125 year anniversary. Essentially I've created a 125 year long digital yearbook, with a link to the University's actual digital yearbook for each individual year. I'm wondering if there is a way that I can make all of the yearbook links open in the same second page.
IE: Main Project open in a window, when I click the 1939 Yearbook pdf hyperlink, the 1939pdf will open in the second window. I then want to find a way so that after this, on the main page, I can click the 1940 yearbook pdf link and have the 1940 yearbook load on the second window, replacing the 1939pdf, instead of just opening the 1940pdf on a third new tab/window?
Note: I have all of the yearbook PDF's online and downloaded, so I can make the hyperlink send you to the site, or do a download style thing.
Thank for any help, and if anyone needs further information just ask me!

Hi
Please take a look to this thread Re: Can I refresh the browser rather than open a new tab?

How can I make iTunes 11 automatically play the next album?

Before iTunes 11, I could just double-click on a cover art to start the album and everything would flow from there, playing the next album in the library once it was finished and so on.
Now, if I do that (in Album view or Artist view), it plays only that album and stops. If I press que Play button at the top of the Artist view, it plays all the albums. But I can't just start listening to an artists' albums from, example, the third one or fourth one. It's either all or one at a time.
And yeah, I know about playlists. I didn't used them before because I didn't have to.

I agree, this is a ridiculous change. The "play" arrow next to the title of the album on the expanded view does nothing; neither does the play option from the context menu when I right click on an album cover. I'm using iTunes 11 on a Windows 7 laptop. Does anyone else have this issue? Very lame.

How can I make multiple TV episodes play continuously?

Similar Messages

Maybe you are looking for