How can I make my computer not turn off (sleep mode, or hybernate)? While plugged into the wall.
I have two dogs, and i am trying to see which one is tearing up my couch while im away by recording via my built in camera and "iMovie". But after a few times trying, I relised that my computer "sleeps" or "hybernates" after only a half an hour. It is plugged in, and i went to System Prefrences > energy saver > then clicked on power adapter and moved both "computer sleep and display sleep" to never. turned off my screen saver. and still having issues with this. Am i missing somthing?
Tony
Thank you Courcoul, i appericate your help. but if you would have read my whole description, you would have noticed i already tried that. "It is plugged in, and i went to System Prefrences > energy saver > then clicked on power adapter and moved both "computer sleep and display sleep" to never." i also did check the schedule times, and it is off, both wake up times, and sleep times.
Similar Messages
-
It's a Toshiba Satellite laptop, made this year, Windows vista, yadda yadda. Look my point is, if my battery gets wasted to a point where it won't charge anymore, will my computer still work plugged into the wall? I can't afford to get another battery. I can't afford a pack of cigarettes.
(Friends suggest me to buy a new one, how about the laptop accessories store? www.laptopkeyboardsworld.com
[img]http://www.snshi.com/pic/cheku/xilie/datu/2009052060001593.jpg[/img]
[url=http://www.laptopkeyboardsworld.com/acer_c197]buy acer laptop ac adapter[/url] [url=http://www.laptopkeyboardsworld.com/asus_c189]buy asus laptop ac adapter[/url] [url=http://www.laptopkeyboardsworld.com/acer_c181]buy acer laptop keyboard[/url] ca430097ca120507H,
This is the HP Global English forum not theToshiba Support Forum. We support HP PC products.
The answer to your question about externally powering your notebook PC is yes.
You can safely remove the battery and plug in the power adapter to use it as a desktop PC.
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer -
can someone tell me how i can get my oiphone 4 to turn back on or has any idea what this problem is
Hi gillybabe82,
Welcome to Apple Support Communities.
Take a look at the article linked below, it provides a lot of great suggestions and will help you solve the iPhone power issue that you described.
iPhone: Hardware troubleshooting
Will not turn on, will not turn on unless connected to power, or unexpected power off
Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIs and corrosion.
Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
After at least 30 minutes, if:
The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
If the display turns on, go to step 4.
If the display remains black, go to next step.
Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
My issue is still not resolved. What do I do next?
Contact Apple Support.
I hope this helps.
-Jason -
When I plug my phone into the computer nothing happens. The phone doesn't respond the computer doesn't show anything and ITunes doesn't show anything!
I would not worry too much about the charging aspect of the computer connection for now. I did notice that the last time I connected my iPhone to my computer the iTunes had changed and the only way I could determine that my iPhone was connected was by noticing a box at the upper right on the computer screen vs. the older graphical interface which showed the connected iPhone in a column on the left of screen. My iPhone did not turn on and did not charge. However the iPhone was connected and I could in-fact select Sync from one of the iTunes pull-down menus. Again, for quite some time I though my iPhone was not triggering the computer at all when I connected it. I use an iMac.
-
OSX 10.7.5 How can I make my computer wake up from sleep?
My computer won't wake up from sleep whether I put it to sleep by a hot corner or by closing the lid. Has anyone a solution, plezase?
Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, or by corruption of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including sound output and Wi-Fi on certain iMacs. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test. -
I am talking about any file in windows 98 that has the read only box checked when I look at the properties of the file from Windows Explorer. I can can get rid of the check from the properties box, but I want to do it programmaticaly in LabView.
Hi,
Wire in '448' to the 'New Permissions' of the Access Rights VI. This will set the file as readable, writable and executable. I just tried this (on WinNT, though).
The 'permissions' parameter is a 16-bit integer where the least 9 bits are used. Of these, for Windows, bits 8, 9, and 10 (0-indexed) are important (i.e. if these are set = integer 448). See online Help for full details.
Hope this helps,
Khalid -
Also, it shutdown unexpectedly when I was using an application. I use it regularly.
Have you tried plugging the charger into a different electrical outlet?
Troubleshooting: My computer won't turn on -
I have a MacBook. It went to sleep and I could not wake it up. I shut it off by holding the power button so it shut off. Now I can't get it to start at all.
Julie...
It went to sleep and I could not wake it up
Try Resetting the System Management Controller (SMC) -
How can I make my computer only recognize my network and not that of one of my neighbors?
How can I make my computer only recognize my network and not that of one of my neighbors? This is for when I am at home, and everytime the computer goes to sleep it essentially loses the connection, only to pick up my neighbors network when it is awaken.
I am on Comcast (Xfinity) Highspeed Cable wireless modem/router
Thanks in advance!
MarkYou can make your network the preferred network.
> System Preferences... > Network > Advanced... > Drag your preferred network name to the top of the list. -
How can I get dock connector to turn off on air play. There is no longer a choice for sound to be displayed on iPad. I do not own outside speakers. Have already reset. Thanks
Slow, intermittent. Sometimes bootable sometime not. Odd behavior.
Sounds to me like a classic case of your HD failing.
Your SMART status may still show verified, with no errors on the Apple Hardware Test, Disk Utility shows no problems on Disk Repair- this is of no help.
I trust you have a good back-up and a bootable clone.
http://eshop.macsales.com/shop/hard-drives/2.5-Notebook/ -
how can i make my keyboard not to appear on my i pad, how can i make my keyboard not to appear on my i pad? couse i want to play a game and is coming on the screen is really iritating ..
You cannot have the keyboard gone altogether, because it has to come up when an app needs input. The best way to do what you want to do is make sure that no apps are running when you are to go gaming: double click the Home button, swipe up all pages that show (not the app icon but the app page). then start the gaming. It it then still comes up, you look at what app is asking for it and set push notifiactions and autotarting off for that app in the settings.
-
How can I make my computer restart with all the same windows that were open when a shut it down?
That is the way Mac OS X 10.8 (aka Mountain Lion) works by default. Are you actually running that system? (See About This Mac in the Apple menu.) If so, make sure the check box in the shut down alert is checked:
-
i updated my 4s yesterday, but my phone will not work at all now, and will not turn off. It has a itunes image on the screen with an arrow underneath and what looks like the charger lead. i've had it on charge! is there anything else i can do?
Cconnect it to your computer with the latest version of iTunes installed.
-
My iPhone turned off by itself and says to plug into iTunes and won't turn on. Is this something I can have fixed at te store? I don't have a computer with iTunes..
You should be able to restore the iPhone, just connect it to the computer and open iTunes.
Make sure you have the latest version of iTunes installed and take a look at this, if you run in to a problem. -
My iPhone 6plus will no longer connect to my Dodge UConnect system. Phone calls get a beep "phone call completed" message. Music will play though. Just can't make calls. Tried turning off iCloud and repairing but nothing works. It did work a few days
Hi Jpcbew,
The article linked below provides a lot of great information and troubleshooting tips that can help you resolve the issue with your iPhone 6 Plus connecting to you car stereo system.
Get help using your iPhone, iPad, or iPod touch with your car stereo - Apple Support
So long,
-Jason
Maybe you are looking for
-
Quicktime Broadcaster 1.5 and Darwin Streaming Server 5.5
Since i upgraded to Quicktime Broadcaster 1.5 (as i want to use H264) i can't use any more the Automatic Unicast (Announce). It says 'Broadcast error disconnected (-3285). I updated to Darwin Streaming Server 5.5 (on SuSE 9.1 Linux on a hired server
-
I want to add panel in applet in which an image is painted in the center and i want to display a panel as popup window in the applet
-
Screeching sound from Mac Mini
hello, ok for a while know there has been a screeching sound emitted from my mac mini. Its like a high pitched squeak, the only way I can describe it is that its like something metal not oiled. Getting worried about it as I dont know if its a warning
-
Photoshop CS4 Serial Truncated
Please help. I have Photoshop CS4 extended which was installed as part of Design Premium CS4. I wish to delete it off one machine and install it on a new machine and can only find a 20 digit serial number in Photoshop>Help>System Info. I have no boxe
-
How to append data runtime in Table in MIDlet
Hi Friends, i am having 2 queries.. 1st:: How can i append data runtime in table in MIDlet ( like web )which are coming from Database. 2: requirement is that 1st row of table should for headings like StartDate,EndDate,Resources and Status. From the 2