How can I make my MacBook Pro work faster?

MacBook Pro
13-inch, Mid 2010
Processor  2.4 GHz Intel Core 2 Duo
Memory  4 GB 1067 MHz DDR3
Software  OS X 10.9.4 (13E28)
I'm not sure what should I do. Should I upgrade certain parts? Should I do something with the software?
I am lost. I am not familiar with CPU knowledge.
Help. Please. Thank you.

Your particular model can handle up to 16GB of RAM - I would suggest at least 8GB as the 'sweet spot' for current and future versions of OS X.
You could also upgrade to a SSD to see a real speed increase - see -> Upgrading Your MacBook Pro with a Solid State Drive.
Both of these upgrades are jobs that you can DIY. There are tons of videos online showing you how to install both. No need for the pros - just two screwdrivers and you can accomplish the upgrades.
Good luck,
Clinton
MacBook Pro (15-inch Late 2011), OS Mavericks 10.9.4, 16GB Crucial RAM, Crucial M500 960GB SSD, 27” Apple Thunderbolt Display

Similar Messages

  • How can i make my macbook pro run faster? seems slower then usual. :(

    okay, so my macbook pro lately seems to be going slow, well, its been gradually getting worse and worse.
    i am getting the rainbow wheel thingy just about every time i click onto a new button.
    i have SOPHOS (antivirus) installed, have never installed any antivirus or mackeeper ****.
    i usually only have safari and maybe itunes open.
    2.2GHz Intel Core i7     8 GB 1333 MHz DDR3 RAM (MEMORY)      OSX 10.8.4     15 inch screen     350GB free hard drive space
    ANY HELP WILL BE GREATLY APPRECIATED!

    First, back up all data immediately, as your boot drive might be failing.
    There are a few other possible causes of generalized slow performance that you can rule out easily.
    Reset the System Management Controller.
    If you have many image or video files on the Desktop with preview icons, move them to another folder.
    If applicable, uncheck all boxes in the iCloud preference pane.
    Disconnect all non-essential wired peripherals and remove aftermarket expansion cards, if any.
    Check your keychains in Keychain Access for excessively duplicated items.
    Boot into Recovery mode, launch Disk Utility, and run Repair Disk.
    If you're booting from an aftermarket SSD, see whether there's a firmware update for it.
    Otherwise, take the steps below when you notice the problem.
    Step 1
    Launch the Activity Monitor application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Activity Monitor in the icon grid.
    Select the CPU tab of the Activity Monitor window.
    Select All Processes from the menu in the toolbar, if not already selected.
    Click the heading of the % CPU column in the process table to sort the entries by CPU usage. You may have to click it twice to get the highest value at the top. What is it, and what is the process? Also post the values for % User, % System, and % Idle at the bottom of the window.
    Select the System Memory tab. What values are shown in the bottom part of the window for Page outs and Swap used?
    Next, select the Disk Activity tab. Post the approximate values shown for Reads in/sec and Writes out/sec (not Reads in and Writes out.)
    Step 2
    If you have more than one user account, you must be logged in as an administrator to carry out this step.
    Launch the Console application in the same way you launched Activity Monitor. Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
    View ▹ Show Log List
    from the menu bar.
    Select the 50 or so most recent entries in the log. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V). You're looking for entries at the end of the log, not at the beginning.
    When posting a log extract, be selective. Don't post more than is requested.
    Please do not indiscriminately dump thousands of lines from the log into this discussion.
    Important: Some personal information, such as your name, may appear in the log. Anonymize before posting. That should be easy to do if your extract is not too long.

  • How can i make my macbook pro run faster?

    My macbook is running super slow. The spinning beach ball appears every thirty seconds and it's annoying. I ran the verify disk permissions and verify disk twice and nothing helps. Please help me

    Verily only checks the disks. It does nothing beyond that.
    How much free space does the system disk have?
    Alaln

  • How can I make my macbook pro go to sleep when I close the lid? Currently it doesn't sleep when on battery.

    How do I make my macbook pro go to sleep when I close the lid?

    For this and other power related issues the best first step to try is resetting the System Management Controller.
    Best of luck.

  • How can I make by MB Pro work on 802.11n wireless?

    A month ago we bought a new MacBook and in conjunction with that purchase we upgraded from a Linksys 802.11g to the AirPort Extreme 802.11n Wi-Fi Wireless Base Station. We wanted to have the 802.11n access for the new MacBook and for our other laptop (mine) - a MacBook Pro 1.83 GHz Intel Core Duo 15" purchased in March 2006.
    I just figured there would be some downloadable upgrade to take my MacBook Pro from 802.11g to 802.11n ... but that does not appear to be the case. (Boy, do I feel stupid.)
    So - the question: What do i need to do to get my MacBook Pro to work fully on the 802.11n standard? Do I need something new physically installed in the laptop? Is there a downloadable upgrade or something on the CD that came with the Airport Extreme unit that I can install? Help!
    I really hope I didn't buy a $200 router that I can never fully utilize - there has to be some way to upgrade from a/b/g to a/b/g/n, right?
    Thanks to any and all who can provide guidance on this.
    MacBook Pro 1.83 GHz Intel Core Duo   Mac OS X (10.4.10)   puchased in March 2006

    Thanks for the tip on the upgrade. I upgraded to Airport Utility 5.1 (I had 5.0) and then did the firmware upgrade at the link you provided. So, all is installed, and I restarted the MB Pro, but my Network Utility still shows that I have only 802.11 a/b/g capability.
    Do I need to take other steps? Do I need to anything like turn my cable modem or Airport Extreme unit on or off or something like that?
    I am really frustrated and confused on this. Is it possible that my MB Pro that is all of 15 months old can't upgrade to 802.11n? I know that the new Inel Core 2 Duo MB Pros have the 802.11n built in. My MB Pro is the older Intel Core Duo (not "Core 2 Duo").
    Anyone else have ideas? Thanks!
    MacBook Pro 1.83 GHz Intel Core Duo   Mac OS X (10.4.10)   puchased in March 2006

  • How can I make my MacBook Pro 15" run faster

    My computer seems to be running much slower now
    than when I purchased it over 1 1/2 years ago,
    I always empty the cache and reset safari,
    is there any thing else that I need to do the make sure that my computer is running great and isn't freezing up so often,
    please help.

    Kappy's Personal Suggestions for OS X Maintenance
    For disk repairs use Disk Utility.  For situations DU cannot handle the best third-party utilities are: Disk Warrior;  DW only fixes problems with the disk directory, but most disk problems are caused by directory corruption; Disk Warrior 4.x is now Intel Mac compatible. TechTool Pro provides additional repair options including file repair and recovery, system diagnostics, and disk defragmentation.  TechTool Pro 4.5.1 or higher are Intel Mac compatible;  Drive Genius is similar to TechTool Pro in terms of the various repair services provided.  Versions 1.5.1 or later are Intel Mac compatible.
    OS X performs certain maintenance functions that are scheduled to occur on a daily, weekly, or monthly period. The maintenance scripts run in the early AM only if the computer is turned on 24/7 (no sleep.) If this isn't the case, then an excellent solution is to download and install a shareware utility such as Macaroni, JAW PseudoAnacron, or Anacron that will automate the maintenance activity regardless of whether the computer is turned off or asleep.  Dependence upon third-party utilities to run the periodic maintenance scripts had been significantly reduced in Tiger and Leopard.  These utilities have limited or no functionality with Snow Leopard and should not be installed.
    OS X automatically defragments files less than 20 MBs in size, so unless you have a disk full of very large files there's little need for defragmenting the hard drive. As for virus protection there are few if any such animals affecting OS X. You can protect the computer easily using the freeware Open Source virus protection software ClamXAV. Personally I would avoid most commercial anti-virus software because of their potential for causing problems.
    I would also recommend downloading the shareware utility TinkerTool System that you can use for periodic maintenance such as removing old logfiles and archives, clearing caches, etc.  Other utilities are also available such as Onyx, Leopard Cache Cleaner, CockTail, and Xupport, for example.
    For emergency repairs install the freeware utility Applejack.  If you cannot start up in OS X, you may be able to start in single-user mode from which you can run Applejack to do a whole set of repair and maintenance routines from the commandline.  Note that AppleJack 1.5 is required for Leopard. AppleJack 1.6 is compatible with Snow Leopard.
    When you install any new system software or updates be sure to repair the hard drive and permissions beforehand. I also recommend booting into safe mode before doing system software updates.
    Get an external Firewire drive at least equal in size to the internal hard drive and make (and maintain) a bootable clone/backup. You can make a bootable clone using the Restore option of Disk Utility. You can also make and maintain clones with good backup software. My personal recommendations are (order is not significant):
    Backuplist
    Carbon Copy Cloner
    Data Backup
    Deja Vu
    iBackup
    JaBack
    Silver Keeper
    MimMac
    Retrospect
    Super Flexible File Synchronizer
    SuperDuper!
    Synchronize Pro! X
    SyncTwoFolders
    Synk Pro
    Synk Standard
    Tri-Backup
    Visit The XLab FAQs and read the FAQs on maintenance, optimization, virus protection, and backup and restore.
    Additional suggestions will be found in Mac Maintenance Quick Assist.
    Referenced software can be found at CNet Downloads or MacUpdate.
    You may need to consider adding more RAM.  How much RAM is presently installed?  It would also help to include this information in your forum profile.

  • How can I make my MacBook Pro wake up faster?

    Dear all, I have a MacBook Pro 13" Mid 2012. It is awfully slow when waking up after being in sleep mode for a long time (> 1 h). I read that other people here in the community are having the same trouble, and that it seems to be related to the standby mode (my computer does not have Power Nap). In the threads, I saw a variety of suggestions, poiting in different directions. Is there an "official" solution to this issue? Thank you very much for the attention.

    Back up all data.
    If you have more than one user account, you must be logged in as an administrator to carry out these instructions.
    Launch the Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Choose the standby delay. In the example below, I use 28,800 seconds, which is 8 hours, Modify as desired. To disable standby mode, use 0.
    Triple-click the line below to select it, then drag or copy into the Terminal window — do not type — and press return:
    sudo pmset –a standbydelay 28800
    You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up. If you don’t have a login password, you’ll need to set one before you can run the command.
    After entering the command, quit Terminal.

  • How can I make my movies pro for mac work?

    How can I make my movies pro for mac work?
    I have downloaded it i click on the icon but I cant make it work

    Delete the app using this free utlity > Download AppCleaner for Mac
    Then re download the app using the same Apple ID it was originally purchased from. You won't be charged again.
    How to re download apps from the Mac App Store:
    Open the App Store. From the menu bar click Store > Sign In
    Click Purchases from the top of the App Store window.
    Select which apps you want to re download. Then right or control click where you see Installed  then click Install.
    If you still have problems, I located the app developer's website. Contact details for help here >   http://www.mymovies.dk/about.aspx

  • How can i reset my macbook pro without not deleting ilife pack?

    Hello ! my macbook pro(13) stars more slowly then before . i am sure there are many unnecessary files that should be deleted. i want my macbook pro to be lke the fist day. So how can i reset my macbook pro without not deleting the ilife pack. ?

    çağrı şahaplıoğlu wrote:
    Hello ! my macbook pro(13) stars more slowly then before .
    Your issue may not have anything to do with your files, it could be a corrupted cache file, reinstalling your OS and files from backup could be overkill and too much work.
    Run ALL of the free OnyX's checks, cleaning and maintainence aspects (not the log files) and reboot at the end.
    http://www.titanium.free.fr/
    Your machine will act a bit slow until the caches and spotlight are rebuilt, but it should act faster
    Your next step is to use OnyX Verify Preferences and "show only corrupt plist" files
    If you find some, make a note of their location and remove then to your desktop and reboot and start the programs responsible, reset your preferences.

  • How can I make a .gif file work in Keynote on my iPad Mini?

    How can I make a .gif file work in Keynote on my iPad Mini?
    Have saved a .gif file to my Camera Roll, and it works fine as I have checked it through mail. When I import it into Keynote however it won't animate. Even when I play slide. Any suggestions?

    The can use apps such as Apple's Pages app for Word documents and Numbers for Excel spreadsheets, and from third-parties apps such as Documents To Go ('premium' version) and QuickOffice Pro HD.

  • How can i change my macbook pro keyboard buttom english to arabic

    How can i change my macbook pro keyboard buttom english to arabic

    Apple does make and sell MacBook Pros with Arabic keyboards but, as far as I know, they're only sold in the Arabic market. You may be able to special order one: I don't know. You may even be able to order the keyboard only online or at your local Apple Store and have your English keyboard replaced. Again, I don't know.
    The best thing to do, if you're in the US, is to call Apple at 1-800-MYAPPLE. Tell them what you need and see how they might go about fulfilling your needs.
    Good luck,
    Clinton

  • How can I backup my MacBook Pro to an external hard drive

    How can I backup my MacBook Pro to an external hard drive?

    Basic Backup
    For some people Time Machine will be more than adequate. Time Machine is part of OS X. There are two components:
    1. A Time Machine preferences panel as part of System Preferences;
    2. A Time Machine application located in the Applications folder. It is
         used to manage backups and to restore backups. Time Machine
         requires a backup drive that is at least twice the capacity of the
         drive being backed up.
    Alternatively, get an external drive at least equal in size to the internal hard drive and make (and maintain) a bootable clone/backup. You can make a bootable clone using the Restore option of Disk Utility. You can also make and maintain clones with good backup software. My personal recommendations are (order is not significant):
      1. Carbon Copy Cloner
      2. Get Backup
      3. Deja Vu
      4. SuperDuper!
      5. Synk Pro
      6. Tri-Backup
    Visit The XLab FAQs and read the FAQ on backup and restore.  Also read How to Back Up and Restore Your Files. For help with using Time Machine visit Pondini's Time Machine FAQ for help with all things Time Machine.
    Although you can buy a complete external drive system, you can also put one together if you are so inclined.  It's relatively easy and only requires a Phillips head screwdriver (typically.)  You can purchase hard drives separately.  This gives you an opportunity to shop for the best prices on a hard drive of your choice.  Reliable brands include Seagate, Hitachi, Western Digital, Toshiba, and Fujitsu.  You can find reviews and benchmarks on many drives at Storage Review.
    Enclosures for FireWire and USB are readily available.  You can find only FireWire enclosures, only USB enclosures, and enclosures that feature multiple ports.  I would stress getting enclosures that use the Oxford chipsets especially for Firewire drives (911, 921, 922, for example.)  You can find enclosures at places such as;
      1. Cool Drives
      2. OWC
      3. WiebeTech
      4. Firewire Direct
      5. California Drives
      6. NewEgg
    All you need do is remove a case cover, mount the hard drive in the enclosure and connect the cables, then re-attach the case cover.  Usually the only tool required is a small or medium Phillips screwdriver.

  • How can i charge my macbook pro with a inverter

    how can i get my macbook pro to charge using a inverter sometimes it will charge and sometimes it wont works fine when plugged into a ac outlet in my home

    pennbank wrote:
    The macbook has to be in sleep or shutdown mode if using an inverter
    more possible fixes here
    https://discussions.apple.com/thread/3026063?start=0&tstart=0
    Although that may be true with some inverters it is not for all of them. If the inverter can get enough power to invert you can run a power saw off them, depending on the size of the inverter.
    Problems start because people buy the lowest cost unit they "THINK" will work based on the printed specs when in fact they need a bigger unit.

  • How can i get my macbook pro too stay on and not sleep when lid is closed?

    how can i get my macbook pro too stay on and not sleep when lid is closed?

    If the machine is asleep, lid closed, and you plug in to an external monitor and an external USB keyboard, the machine will wake, anbd reconfigure the screen resolution for the external monitor, Once it has made this configuration change, you can open the lid and it will continue to address only the external monitor.  At least that's how my early MacBook Pro unibody 13" works. It seems to run a bit cooler this way. It gets quite toasty with the lid closed while doing anything demanding and you are more likely to hear the fan come on.  I have not seen any temps that would cause alarm, but I do get a high speed (6000 rpm), noisy fan sometimes with the lid closed, .
    If you operate in the open-lid, external monitor only mode, if you deactivate the monitor for any reason, when it reactivates it will be running both screens, with all the navigation hassles this entails, so I generally set it not to deactivate the screen when in this mode.
    Thus I agree with those who say that some of the cooling air is drawn in around the keyboard, the difference in cooling performance is observable.  If you activate istat pro, get the computer hot running in clamshell mode, and open the lid, you can watch the CPU temp drop by a few degrees C within a couple minutes.  It isn't a huge difference, but enough the lower the fan speeds.

  • How can I mirror my macbook pro desktop through Airport Extreme to a digital projector with only VGA and DVI inputs?

    How can I mirror my Macbook Pro desktop through Airport Extreme to a digital projector with only a DVI & VGA inputs?? Want to use it for presantation like Keynote/ Pages.

    Never mind, I solved it.  Didn't know the converter needed a power source to operate (duh!)  Now I have that, it works just fine.......

Maybe you are looking for

  • On screen Icon

    I have got a small icon(alert) at the top left hand side of  my screen. It looks like a battery with a number by the side of it.This morning the number was 9 then it went to 12 and now its on 19 can anyone tell me what it is how to view if its an ale

  • Why are my matched songs with downward arrow using mac disk space

    I have 1159 songs in my iTunes library which takes up over 16 GB of space on my macbook air SSD. Of those 499 are matched with 451  showing "matched" as well as the cloud icon with a downward arrow which I thought meant that they were not stored loca

  • UCS integration with vSphere - invalid URI error

    Hi, I am struggling to integrate UCS Manager with vSphere vCenter. The vCenter extension is being exported from UCSM without any errors, but when trying to install the plugin via vCenter Plug-in Manager I am getting this error: "Invalid URI: The URI

  • Need a help on TableModelListener.

    Hi, I need a help on TableModelListener. I have a table in which i have some Double vaules and in a textfield i am summing up the values. This table have thousands of record. Already i am summing up the values using for loop and same when i update an

  • Storage on iCloud

    , I bought more storage on iCloud but I'm unable to access the storage. Anyone know how?