How can i make my officejet 6500a print in black and white only?

I just bought an officejet 6500a and I can't figure out how to make it print in black in white only. I print a lot of stuff that doesn't need color and want to save my ink. On some prints it gives me that option when I print. but for the most part it doesn't allow me to change to black and white on things i am printing off the web

Pages 30-34 of the user manual for the Officejet 6500A covers how to change print preferences for the printer with both Mac and Windows. It covers documents, brochures and photos and covers finding the gray scale option. Here is a link to that manual http://goo.gl/6J61R .
I hope that this helps.
I am a former employee of HP...
How do I give Kudos?| How do I mark a post as Solved?

Similar Messages

How can I print in black and white only from mobile device

I print coupons from the coupons.com app. I can change the settings on my printer through my computer to print in black and white only so as not to use up all of my color ink. How can I change this on my iphone to print in black and white?

Hi,
HP ePrint app on a modile device allows you to print Grayscale mode
Regards
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

HP 8500 All-in-one printer - how can I print in black and white only (to save color ink)?

I want to be able to select the option of printing in black and white only to save color ink. How can I do that?

What operating system? You can generally find an option for "Print in grayscale" and "Black ink only" in the Color or Advanced tab of the Printer Settings.
Some color ink will still be used to keep the printheads from clogging, see here for information. (The Officejet 8500 is an IIC printer in the vocabulary of that page.)
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Why can't I print in black and white only?

Why is the HP Officejet Pro 8600 Plus not able to print black and white only if the black cartridge is still not empty?
What I mean is I went into the settings to set the printer to print black and white only as well as print text only in black. Yet I am FORCED to replace the cyan, magenta, and yellow cartridges because they are depleted. What does cyan, magenta, and yellow ink have anything to do with printing black considering a SEPARATE black cartridge exists and is still full?
I am aggravated at how the driver for this printer is designed TO FORCE me to purchase nonblack cartridges when I purposefully set the printing to be BLACK ONLY. I am unable to go forward with my printing. This is considered a show stopper and is unacceptable considering that the setting I assigned and the cartridge(s) depleted message contradict each other. If the setting is made to print in black and white only including text, then print black and white since I know the black ink is still available.
Take into consideration that printing can take place at anytime. Not being able to use black as my alternate color (WHICH IS NOT EMPTY AND IS A SEPARATE CARTRIDGE) forces me to stop. I am unable to go forward until the store opens. WalMart is not always an option. That is time lost.
The inability to switch to use the black cartridge only is a time waster.
Let's call it for what it is, a form of ransom. HP wants me to spend money on color cartridges that have nothing to do with printing black and white. When I am ready to print in color, that should be a time of my choosing.
Incidentally, the form I am trying to print is black and white only. No color is on this form. It makes no sense to force color printing of a black and white document.
This question was solved.
View Solution.

Hi,
To protect itself specially the printheads, many printers NEED other inks even they only print black. During the warming up process, printers require all inks therefore they may stop before we can continue. Some printers allow user to print (specially the ones which have tri-color ink tank) but they may print at a baby snail speed.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

How to print in black and white only?

Hello,
I have HP Color Laserjet cp1515n. I downloaded and installed "HP_CP1510_series_full_solution_EMEA3-v4.0" from HP's website for the driver.
When printing (in the properties for the printer) there is no option whether to print in black and white only or not. Please help me get that option. And please tell me how I can save toner.
Thank You
I have windows xp

Hello!
You can get this accomplished within most word/printing applications or preferences by selecting 'Greyscale' printing or black and white only.
You can find an article related to this function with more details here:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01514143&tmp_task=useCategory&cc=us&dlc=en&lang...
Hope this helps!
Help the community by marking this post as a solution if it solved your issue!.
If my post helped you in any way, please click the blue KUDOS star under my name! It would mean a great deal.

Hp 6100 printer. how do i print in black and white only?

Just bought an HP6100 Printer and can't get it to print in black and white only. I clicked "Gray" in the setting but didn't seem to help. Still prints a yellow smile face. Thanks, Larry

Hi,
Which application are you using ? Based on its manual (page #65):
Most print settings are automatically handled by the software application. You need to change the settings manually only when you change print quality, print on specific types of paper or transparency film, or use special features.
You need to set this up from the application(s) and you can set as default too.
More info is in the following link:
http://h10032.www1.hp.com/ctg/Manual/c00753187.pdf
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

How to print in black and white only on hp photosmart 6520

Cannot find a place to select print in black and white only on my HP Photosmart 6520 printer.
It prints color just fine, but sometimes I do not want to use my color cartridges. I selected B&W instead of gray scale, but cannot stop the color printing.
Thanks

Hi,
Please try (for Windows):
Double click printer icon on desktop,
Clich Set Preferences
Click Advanced
Under Grayscale, select Black ink only
Click Ok/Apply ..
Please note: the printer still need color inks during warming up process.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Printing in black and white only - looking for a definitive solution

Hi
I've been trying to find out once and for all how to make sure my black and white text documents are printing only from the large pigment-based cartridge (525 PGBK), rather than using the smaller black dye-based cartridge (526BK), or from a combination of the dye-based colour cartridges. I've trawled through endless forums, and finally in frustration I recently called Canon's Australian phone support team.
I thought I'd nailed it. The phone support person told me that if the document I'm printing is definitely black only, then all I need to do is print normally, with grayscale DE-selected. He said nothing about also de-selecting duplex. But I've since read online advice that contradicts this in relation to other models (I haven't found any advice based specifically on the MG6150, apart from the phone guy from Canon). Some say you need to SELECT grayscale and DE-select duplex; others say to DE-select both grayscale and duplex; others say to select grayscale, DE-select duplex, and also select dither (on my screen that's under Main > Print Quality > Custom). I'm now wondering whether I've nailed it after all.
If anyone from Canon is reading this, can you please give a definitive answer to these questions:
1. How do I ensure that my black and white text documents print only from the large pigment cartridge?
2. Can I print in automatic duplex using this method, or do I have to do manual duplex?
2. Will this also work for purely black and white NON-text documents as well (e.g., photos that have been converted from colour to B&W)?
3. If not, is there another way of forcing B&W NON-text documents to print from the pigment cartridge? What about a way of forcing colour documents to print from the pigment cartridge?
4. If my smaller black dye cartridge (526BK) isn't being used up at the same rate as the other dye cartridges, is there a way of forcing the printer to use this instead of the pigment cartridge for B&W text documents, but NOT to mix in any of the colour cartridges at the same time?
5. Does this procedure work for all other Canon printer models in addition to the MG6150, or just a limited range?
Many thanks for your patience in reading this -- I'm really trying to get the best out of my printer rather than give up and buy a different brand, and I'm sure others would appreciate a definitive answer to these questions as well.

I have at MG8100 and it seems that there is no solution to this. I have scoured the web for one and it seems that there is no way to print in black and white only. The grayscale option uses all the colours including black to print.
I have gone through a ton of colour ink just printing black and white documents. Its cost me a fortune and I've worked out that I can get it done cheaper by going to the print shop.
As far as I am concerned this unbelievable. A printer that doesn't give you the option to print using black ink only! And its not advertised or made known in any way. You have to buy the product and then find out later that it does not have a black and white print option. It seems there are a lot of people out there that are unhappy about this, and the "problem" seems to go quite far back. Why haven't Canon responded by adding this feature?! I wont say it here, but I think it must be obvious. Brings to mind the story of housecleaning product manufacturers that increase the size of the closures so that consumers will use more of the product, which is actually wasteful, so as to increase the purchase cycle.
This leaves a really bad taste in my mouth. I'm flogging mine now, and I am done with Canon for good!

Print in black and white only at hp desktjet 1515

Hello
I've a problem with printing in black and white only
I don't found any tutor in manual or at internet how to print black and white only.
I mean black and white not grayscale
Thank you

hi, where did you change the color profile? I have a Hp Photosmart printer too and if I remember rightly, when you click 'print' in whatever application you are printing in there should be an option in one of the dropdown menus that comes up to change everything to black and white.

How can I print in black and white only directly from apps on hp screen?

My printer preference from my pc is set to print in black and white from my computer. How do I set the same black and white settings from the HP Photosmart Plus printer, when printing directly from Apps on Home screen?

Hello AdrianaSFleury,
At this time there is not an option or a default to set black and white only from the front panel of the printer. Some applications may give you settings in the Application itself for color or black and white but that would be the only place to change the color of the document/photo for your print jobs.
**Click the KUDOS star on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.
(Although I am employed by HP, I am speaking for myself and not for HP)

HP Officejet wont print in black and white!

I have had an HP OfficeJet 6600 printer for a couple of years now and it has shocked me how many times I have had to replace color cartridges that I really never use. I am a high school teacher who does a lot of work from home and I only need to print in black and white, yet I am not permitted to do that because everytime a color runs out, I cant use my printer AT ALL. This comes off as a scheme for HP to make more money because everytime this message comes up, I am offered the oppurtunity to buy color cartridges at a high price. I will never be buying another hp product again!

HP and other printer manufacturers have different printer technologies for different needs. For inkjet printers:
Some have printheads built into the ink cartridges. These printers can typically print with one or more of the colors completely empty, or even with color or black (but not both) cartridges removed. The Officejet 8040a is an example.
Other printers have separate ink supplies and replaceable printheads. An example would be the Officejet 6600 printer. The printhead in these printers can be replaced if they are damaged by running the printhead with colors out. Some of these printers will allow printing with a color out, other will not. If the printer is run without ink in one or more colors the printer may be damaged, but the user may be able to recover without having to send the printer for service.
Other printers have permanent printheads. To run these without some ink in all the colors would risk causing damage to the printhead due to clogs, air ingested in the printhead or burned out printhead firing resistors. The Officejet 6700 is an example of this type of printer. For printers with fixed printheads this could require service to get the printer to print properly again when the ink is finally replaced.
The document here describes how ink is used. While the document is written for HP Inkjet printers the same principles apply to inkjet printers from other manufacturers.
If you never print in color a laser printer would likely be a better choice. If you occasionally print color but mostly black an IPH printer like those in the first category above may be a good choice.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

How do I make one part of a picture black and white and rest color?

I am working on new campaign for Vi-spring orange county. I need to take a photograph of a woman with a bare back sitting on a mattress and make part of the picture in black and white and the other part in color. I then need to insert an outline of a spine on top in a bright color. I would really appreciate some help on how to start.

I think what we need is a little more information.
When you say you want to make part of the image black and white, do you want to make certain areas of the image black and white or just do away with certain colors in the photo. You can do a selective color and get rid of all but one color ie. A red rose in a green field, take out all the green in the image and the red in the rose is the only thing that has color. Or you can take out one color and leave the rest of the colors in, so basically the oppsite of what I just explained.
If you want certain sections of a image black and white ie. a room with a bed in it make the whole room black and white and keep the bed in color...you need to look into masking.
If you want to do masking I can find you a tutorial for it, but I need to know if i'm on the right track.

How to get my photosmart 7525 to print in black and white on a pc

How do I get the print option on my pc that lets me choose color or black and white in Windows?
This question was solved.
View Solution.

Hi ep43,
Welcome to the HP Support Forums! I understand you would like the options to change from color printing to black and white on your HP Photosmart 7525. I would like you to follow the steps listed below on your computer:
1. Go to your Start Menu
2. Select Devices & Printers
3. Right click on your PS 7525 and select Printing Preferences
4. Click on the Advanced Options
5. Here under Printer Features, you will have the option to Print in Grayscale, Black Ink Only or Off (which would default to color printing)
I hope this helps!
Thank you,
HevnLgh
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

How do I set my printer to black and white ONLY?

I have an HP Photosmart All-In-One C4480. I don't want to have to buy color cartridges, because I only need black and white, and I have three black and white cartridges already. How do I set the printer to print my documents in black and white only?
Thanks,
TW

Hi,
Follow the steps below to print using Black Ink only:
1. From the application used to print, click the File menu and select Print. The Print window appears.
NOTE: The Print window might be minimized: Click the Show Details button to see all available settings.
2. To access the color options, click the lowest selection box listed as the name of the program (e.g. TextEdit)
Will appear as Copies & Pages within Microsoft Office applications.
3. Select Paper Type/Quality from the drop-down menu.
4. Click the triangle next to Color Options to expend the settings.
5. Set the Color field as Grayscale.
6. Set the Grayscale Mode as Black Ink Cartridge Only.
You may save the settings for future use by clicking Presets > Save Current Settings as Preset...
Any used preset will remain default so simply select teh standard preset to print in color.
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Printing in black and white only from the internet with a photosmart 7510

Hi
I have and photosmart 7510 and i cant figure out how to change the setting so that when i print off the internet it is black and white only, that way I can save my color cartridges. In particular when i print coupons from the net, I only need them to be black and white.
Thanks for your help!

@432vero,
Go to your printer preferences on your computer.
1. Click Start menu
2. Choose Devices and Printers
3. Right click on the printer
4. Choose printer preferences
5. Choose ADVANCED
5. Choose "Print in all black text ENABLE" or "grey scale"
**Click the KUDOS star on the left to say 'Thanks'**
Please mark a reply "ACCEPTED AS SOLUTION" if it solved your problem, so others can find it.

How can i make my officejet 6500a print in black and white only?

Similar Messages

Maybe you are looking for