How can I make my phone switch to 3g/4g from wifi automatically?

my internet at home drops out all the time, and my phone stays connected to the wifi even though it isnt working (full wifi signal just no data going through), is there a way to make the phone switch back to 3g/4g/lte at this time???
thanks

Sounds l,e a problem with your router. The iPhone switches automatically to cellular when a Wi-Fi signal is not present. But in your case the Wi-Fi signal is there but the router seems to have lost the connection to the Internet.
Try rebooting your router bye wearing off for thirty seconds then turn it back on. Also reset your device. Press and hold the Home and Sleep buttons simultaneously ignoring the red slider should one appear until the Apple logo appears. Let go of the buttons and let the device restart. See if that fixes your problem.

Similar Messages

  • How can I make my phone number active when viewing from a mobile device. My phone number is in my header in CSS

    How can I make my phone number active when viewing from a mobile device. My phone number is in my header in CSS

    See this support document http://support.apple.com/kb/HT5661

  • How can i make my phone die faster if the screen is black

    how can i make my phone die faster if the screen is black?

    There are some misconceptions that open apps consume battery power.  This is generally incorrect.  Read: http://speirs.org/blog/2012/1/2/misconceptions-about-ios-multitasking.html

  • I want to know how can I make my playlist in my iPhone be from oldest to newest?

    I want to know how can I make my playlist in my iPhone be from oldest to newest?

    You cannot do that from your phone. You can do that from your computer.

  • How can I make my phone run faster?

    anytime I have to download or upload or search the web it is very very slow .

    ray miranda wrote:
    I have my iMac purchased in 2008 and it is running very slow.  I have a time capsule.  I believe it only has 1 GB of SD Ram.  Will it run faster/better if I increase the Ram?
    YUP!
    How large is you HD and how much space do you have left?
    Care to share which OS you are using?
    How can I make my iMac run faster?

  • How can i make my e-mail account private on my wife's ipad

    How can I make my .mac account and my wife's gmail account private for each of us on the IPad?

    You can't - the iPad is essentially a single-user device. You could try providing feedback here to see if it makes it into a future iOS release http://www.apple.com/feedback/ipad.html - you aren't the first person to enquire about this, and it's possibe that the more people who request it the more likely it is to appear.

  • How can i make a graph y is unmber pasing from UDP port,x is the time stamp.and in the same time this graph can display several numbers to compare.

    how can i make a graph
    y is number(the blue wire)pasing from UDP port,
    x is the time stamp.
    plus in the same time this graph can display several differenr numbers to compare.

  • How can I make "Call Phones" my default view? Skype 7.6

    Hello,Does anyone know how I can make CALL PHONES my default view. Skype defaults to the SKYPE HOME which is pretty useless.Thank you.Bruce

    Hi ..
    For a specific region, that requires a third party add on called Glims. It's free   > Glims for Safari
    Tutorial | Glims:   Adding a new search engine to Safari
    Frequently Asked Questions | www.MacHangout.com
    To access Glims settings, from your Safari menu bar click Safari > Preferences then select the Glims tab.

  • How can I make a dropdown box populate with values from other fields?

    I am trying to create a NCAA bracket where they select teams from a dropdown menu. For example, they choose which teams win in game 1 and 2 through a dropdown box. The winner of games 1 and 2 then play each other, so how can I populate the dropbox with their selections for game 1 and 2?
    Game 1 winner --
         (game 9)        |--- Game 9 winner
    Game 2 winner --
    Game 9 winner needs to populate with their selections from game 1 winner and game 2 winner.

    I would look at using the setItems Acrobat JavaScript method.
    Have you considered using  a Mouse Up action for "Game 1" and "Game 2" to fill "Game 9"

  • How can I make a member of one class accessible from another class?

    I thought by making a data member protected it was available to all members of the package, but the compiler is giving me an error. If I put the class name dot the data object it thinks it is a function and gives an error.

    I can't post actual code or I'll get in trouble.
    I can't create an instance of A because the class
    needing to call the structure is a Thread and there
    will be multiple instances of it.
    I need one solid structure and it can't be static
    because it has to be ablet o change.So you can't use a static and you can't use an instance. So how exactly do you ever access A?
    BTW you are describing the impossible so you need to take a deep breath and give an explanation that makes even a modicum of sense. Hint: what you have described thus far is nonsensical enough that nobody is going to want to steal your precious code trust me.

  • How can you make it so that when a person from a company calls me it shows their name and company on the screen

    I use my iPhone for work as well as personal. However for work, I have noticed that when someone rings me, for instance Bob Mansfield from Com tec, the phone screen states just 'Bob' and no other details. I have the best part of 6 Bob's in my contacts all with different surnames and company's. Is there a way that I can get my phone to show more info on the person calling. For instance, surname and company if applicable? Any help would be much appreciated.

    See deggie's response in this post... https://discussions.apple.com/message/8531821#8531821

  • How can I make a homemade video on iDVD transition from one chapter to the next?

    For example, I usually have 4 chapters for my projects.  I coach basketball so each chapter represents a quarter.  When quarter 1 ends, it goes back to the menu...rather then going right into quarter?

    Hi
    Not 100% on Your question - but may be this helps.
    Play all resp. one chapter at a time
    Play All Button
    1. There are NO - Play All - button in any version of iDVD
    2. It can be faked in several ways
    Easiest and most fault proof way is to make a doublet movie containing All and with
    Chapters set to match. It will take up x2 space but is easy to understand and produce.
    Cons: Tried this in iMovie’11 by Exporting out each part as a full Quality QT.mov then Importing back into new events and putting these into a new project (Play All project). Resulting DVD had Audio that was OK (as parts) - BUT the picture was very bad and standing photo were cut of in height. So the Play All movie has to be created from same material and exactly in the same way as the individual parts + then Chapters has to be set to match.
    • It's said that one can put all movies into a Photo/SlideShow and this will also
    give the function of a Play All button - Tested - and ONE HAS TO un-cheque - Scale pictures to TV-Safe area else it will be a black frame all around and a small picture !
    Mike Evangelist1
    You might be able to get close to what you want by using a slideshow in iDVD. (It's not widely known, but you can put videos in a slideshow.) If you set the slide duration to manual, playback will pause after each movie/slide, and you can continue with the 'next' button.
    3. Using another program to do this e.g.. Roxio Toast™ where there is a Play All button option.
    Summary
    a. Making a Play All movie with same care as the individual Part movies - gives a very Good Result
    b. Using Roxio Toast™ - also an usable way to go
    Yours Bengt W

  • How can I make a change on one computer effect other compujters automatically

    If I change a bookmark on one computer, I want that bookmark reflected on all the other computers. It seems as if I have to do the sync on system A to get the change to the server; then I must go on System B, change the sync type to copy from the server and do a sync. This is way too cumbersome. If synch means to have the same data everywhere, why isn't the default to make this happen as one logs into each system? right now if I make a change on one system and do a synch, it will get overwritten when I go to another sysem and synch.

    We use test sites on our remote server. We purchase a cheap $2.99 .info domain and give it a unique domain name. We then make it an addon domain on our remote server.
    When we're building sites we then make a unique subdomain to the addon domain. We upload our files to each unique site's subdomain so we can see and test them live,.then we can contact the client
    and tell them to take a look at their site live, which at the time is a subdomain, etc.and uploaded.
    Once we have the site completed and uploaded to the designated subdomain we then contact the client and ask them to test their site and see if it's ready or do we need to make more changes.
    We use a hosting package for this that cost us less than $30.00 a year with unlimited domains and subdomains. We've got about 30 subdomains on it now and they're not even making the usage wiggle because of taking very few hits.
    Once the site is completed and approved we then delete that particular site's subdomain and upload to the clients remote server.
    We don't test our sites locally, we test all our sites live as we build them using a subdomain to the .info tld domain on our remote server. You can also buy hosting packages for around $12.00 a year to test your sites on.

  • How can i make a 'publish preview' in a browser from a jsfl script?

    I created a jsfl script that modifies and after publishes a .html file. I would like to be able to test this html file in a browser. Window.open doesnt seem to work in jsfl. Is there another solution that i can use?

  • How can I make the keyboard not to appear on the screen automatically ?

    .

    Hi Parrotever,
    Welcome to the Support Communities!
    The onscreen keyboard usually appears anytime you tap in a field to enter text.  If you tap in another area of the document or web page, it should disappear.   There should also be an area in the bottom right corner of the onscreen keyboard that you can tap to hide it.  See the information in the iPad User Guide below:
    Enter text - iPad User Guide
    http://help.apple.com/ipad/7/#/iPad997da459
    Hide the onscreen keyboard. Tap the Keyboard key.
    If that option isn't available, I would suggest closing the app and restarting the iPad to refresh it.
    iOS: Force an app to close
    http://support.apple.com/kb/ht5137
    Turn your iOS device off and on (restart) and reset
    http://support.apple.com/kb/ht1430
    Cheers,
    - Judy

Maybe you are looking for

  • How do I move my photos out of Media Smart to another file on my computer, like My Pictures?

    I uploaded my photos from my camera for the first time using HP Mediasmart, and now I cannot get them into my normal photo file called, My Pictures. I normally use a windows program to upload to my computer, but thought I would try something new. Now

  • Running 10.6.8 on Macbook after new hard drive installed. Issues now.

    Original hard drive died. Replaced it and installed 10.6.8. Iphoto is not on device nor a few others. Will not upgrade even when 10.6.8 is upgradeable. Just not running with full capabilities. Should I wipe it and start over? Bring it to Apple store?

  • Embed pdf and print (redux)

    This continues this discussion in this community which got sidetracked into an interesting discussion of Hebrew and other RTL books. My problem: I want to embed a pdf "handout" into an iBook. (1) The reader should be able to see it as a thumbnail and

  • Where is the Pages Icon?

    I am trying to move pages around in a pdf using Acrobat Pro 8.1.5, and between multiple pdfs.  I do not have a pages icon in my navigation panel, nor do I have thumbnails of the pages in the navigation panel.  When I go to View > Navigation > Pages,

  • Conf.

    Dear SAP Guru, Plz tell the How the configuration clearing account?