How can I make my toshiba c55-8350 windows7 laptop touchpad to work again?

I uninstalled my toshiba c55-8350 touchpad after experiencing BSOD. I replaced it with a current version of the driver, but to my surprise, the touchpad is no longer responding. I really need the help of this forum please.

Use the Toshiba application installer to install the original touchpad driver.

Similar Messages

My free apps purchased using my cousin's apple id won't open anymore on my iphone but apps donwloaded using my own apple id still works. Why is it like that and how can I make apps purchased using my cousin's apple id work on my iphone? Help!

My free apps purchased using my cousin's apple id won't open anymore on my iphone but apps donwloaded using my own apple id still works. Why is it like that and how can I make apps purchased using my cousin's apple id work on my iphone? Help!

Welcome to the Apple Community.
Delete the apps purchased by your cousin and purchase your own.

How can I make an invalid dynamic disk Array available to the OS again

Hello Storage Pros
The setup
I have a Promise VTrak E610f head unit with 2 VTrak 610j expansion units attached to it together giving me over 27 TB of usable storage space.
At the hardware level I slip the storage into 6 parts containing 7
1TB disks and had the parts configured into 6 RAID 6 arrays. In the end; each of the 6 arrays gives me 4.6TB of usable storage space.
On the OS level, I have the storage attached to 2 servers: Windows server 2008 and windows server 2008 R2 over a Qlogic fiber channel switch. Each of the 6 arrays are viewable as basic disks of 4,6Tb which I went on to configure as a single RAID 0
spanned volume of 27TB and for that all the disks had to be converted to dynamic.
The problem
Now comes the problem: On my first attempt to do a firmware update on the VTrak E610f storage; all the volumes were rendered foreign and I had to import them to be able to use them. Although the import was successful, I lost all the set NTFS permissions
and SMB share and I had to manually reconfigure them. Upon doing so The OS registered some inconsistencies in the storage and recommended that I ran chkdsk. Since the storage is that big I reluctantly complied and restarted the server.
The first server was restarted BUT chkdsk did not commence as scheduled, the server powered right up. After logging in to inspect; I discovered - to my surprise, that the disks were now shown as invalid in Disk Manager and were no longer visible to
the OS. Assuming that maybe a restart of the other server and the storage would set things right, I went ahead to do so but to no avail. After rebooting the entire system (including the storage), the other server also displayed the disks as invalid and were
no longer visible to the OS as well.
My question is; how can I make the disk available again from this ‘invalid’ state without losing data?
What I tried but did not help:
Taking the disks offline and then online again did not work, after the disks were online again, they still appeared as invalid.
Reactivating the disks threw an error “operation not allowed on an invalid disk pack”
Calling support of the storage manufacturer: they did not find anything wrong with the system, after 5 hours we had to stop.
I fear converting the array from dynamic to basic will destroy all the data.
HxD is showing no errors in the disks
If there is any expert out there with helpful tips; your assistance will be greatly appreciate.
Cheers
John

Hello Shoan
Thanks a lot for your response and tips. Sorry I could not get back to you in good time for I had to run some of the tests you provided, it took some time to
thoroughly re-test the system.
The summary
The initial firmware upgrade attempt forced 3 disks offline and the other 3 became foreign. I had to re-import them to have access again. after re-importing
the disks I realized all NTFS permissions and SMB shares of the folders on the disks had disappeared, but at least the disk was visible and accessible at that point - but not fault free. It was recommened that I let chkdsk run. However rebooting the
system to allow chkdsk to run did not result in chkdsk running, instead chkdsk did not run and after restart, the OS showed the disks as invalid. And that is still the case now.
Response to your questions:
Yes the storage array was (and is still) connected to another server 2008 R2 server when the problem occurred. The second server is also displaying the same problem: the disks are shown as invalid.
The loss of SMB shares and NTFS permissions occurred after the initial firmware upgrade attempt, some disks (3 out of 6 of them) were forcibly offlined and the other 3 were, suddenly, marked as foreign. In the end, and to have access to the disks
I had to online the offlined 3 disks and then reimport the rest of them. From the way I understand it, if the upgrade was not the cause, then at least it was the trigger.
In as far as converting disks from dynamic to basic, I was not in luck so far:
Three of the companies I have contacted (recommended by promise Technology technician) so far only work with smaller disks like 2TB, 27 TB like I have is so
far too big.
I’m not sure converting the disks to basic will help much though, since that would break the single 27 TB volume which the OS was working with into 6 individual
disks of 4.6 TB. Will I be able to get the data back that was written to just one volume from those 6 individual and unrelated disks?
Above all, I have connected the RAID storage system to a newly installed Server 2008 R2, the disks are also shown as invalid.
I have spent more than 17 hours in remote sessions with a Promise Technology technician trying the resolve the issue. From the technician’s side all seems in place with the exception
that the disks are invalid in the OS.
I have contacted Microsoft Customer Support service with the issue. Given that Microsoft did not manufacture the storage unit, can they help at this point – or am I better off
putting my hopes else?
Your help is always appreciated and again, thanks for your response and advice.
JohnV

How can I make my pages a smaller size after completing my work?

I have finished making some newspaper styled pages, however they are too big (due to poor calculations). How can I make my pages smaller, or to be the size I want?
Thanks!

As DOD and Peter have suggested, Layout Adjustment is probably the way to go. You will have to do some manual adjustments, but this tool can help save you some time.
If you are using CS5 or earlier this explains the process:
For CS6 you can use the Liquid Layout menu to do this:

How can I make an icon that links to a webpage that works with Mac and Windows??

Hi!
I burn CDs with my photos and send them to clients. Besides the photos folder, I would like to include a file (similar to the .webloc files on the Mac Desktop) that can be clicked and it will be linked to my website - it will open up a browser window and go to my website . Is it posssible to make one of these icons that works with both Macs and Windows machines? Thanks!

Now it works! Thanks, Denico!
The reason I saved to text: The first time I followed your instructions, it did not work. I tried to figure out what I did wrong and saw that you wrote to "save as plain text." I did not know what this means and there was no option available to save a plain text. So I looked around and saw "save as stationery" and I guessed that maybe that was what you meant. And after that, it worked! But the next thing you know, the icons started duplicating themselves.
I guess I had made a different mistake in the beginning and I fixed it without knowing what it is.
Thanks for clearing that up.
But just one question. WHY does saving as "stationery" make an icon duplicate itself?

I pre ordered an album. One of the songs was released early but it won't download. It says purchased by it. How can I make it download without buying the song or the album again?

I pre ordered midnight memories (a one direction album) a couple months ago. One of the songs was released early and was available to be downloaded. Because I had already purchased the album I figured that the song would automatically download but it isn't downloading. It says that it is purchased. Please explain how I can get the song to download without having to purchase the song or the album again.

Download previous purchases from the iTunes Store - Support - Apple

My Apple TV is having problems with slideshows for photos synced from iTunes. How can I make it play thew whole slideshow without starting the loop again half way through?

My Apple TV randomly returns to the beginning in the middle of the slideshow for no reason. I don't habve the photos on shuffle
I started the slide show many times and somtimes it got through 20 photos, other times 50. Then all of a sudden, it goes back to the beginning and starts again. It's so frustrating as there is no reason for this and it doesn't loop back to the start on the same photo each time. I have about 350 photos in the album and they all loaded fine as thumbnails before I played the slideshow.
Can anyone help please?
Thanks, Adam

Have solved my own problem. My PC sits on the floor so I have a four-port USB hub on my desktop with one port in use. I use one of the other three ports for USB-related task. As I was shutting down for the night I had a - what turned out to be inspired - thought about whether there was an adequate power supply from the hub. I then tried the iPod USB connection directly into the front of my machine and everything worked. It seems that an inadequate power supply was the cause of this strange set of conditions.

HT4392 My macbook air goes to sleep mode after 2 minutes, how can I make this longer? It's frustrating trying to work.

Hello,
I am struggling to get my macbook air on a longer sleep mode, i have searched through the settings and trying putting the saver onto a longer time, however this does nothing. Now my macbook keeps going to skeep after two minutes and its really quite frustrating, can anyone help me?

Go to Apple menu / System Preferences / Energy Saver.
Change the settings for computer sleep and display sleep to what you want them to be.
Next - important step - reset the PRAM.
Shut down your Mac.
Locate the following keys on the keyboard: Command (⌘), Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys.

How can I make firefox move my images in development mode - it works from the web and with IE

Viewing web pages with Firefox from local files does not permit images to be moved. IE does allow this. Moving images from the web are fine. Why is this - code is shown below
== This happened ==
Every time Firefox opened
== I first tried it ==
== Troubleshooting information ==
Moving an Image
Hmove=-100;
function moveObjRight(obj)
obj.style.left=Hmove;
Hmove+=2;
if(Hmove

Do you have that problem when running in the Firefox SafeMode?
[http://support.mozilla.com/en-US/kb/Safe+Mode]
''Don't select anything right now, just use "Continue in SafeMode."''
If not, see this:
[http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes]

When i plug in my ipod a message says I can only have one ipod per computer, but my last computer broke. How can I make my new computer my actual Itunes library?

when i plug in my itouch, a message pops up and says my ipod is already registered on another computer (my old computer that broke). How can I make it so that the message won't pop up again and i can freely sync songs from my computer to my itouch and vice versa?

Copy everything from your old computer, or your backup copy of your old computer, to your new one.

How can i make audio player with osmf??

i want to know how can i make audio player with osmf and flex4.5 ?

Thanks again...I suppose I'd just like it louder in case the radio is on when the directions are given. The difference between the iPhone & Nokia is like night & day!
BTW, do you know if the Maps program is using data from my cell phone plan as we drive? Or are the corresponding maps downloaded into the phone once for the trip?
Thanks again!!

Re: How I would make the Toshiba AC100 successful

Hi All,
I post my ideas for improvements here, maybe someone from Toshiba reads this.
The original blog post is here:
http://soltesza.wordpress.com/2011/05/09/how-i-would-make-the-toshiba-ac100-successful/
Please feel free to contribute here or at the blog post.
The AC100 is an early attempt from Toshiba to create an ARM based netbook (a smartbook) with Nvidia's successful Tegra2 chipset.
Although, the AC100 looks like proper hardware design, it became only
mildly successful. Some of the reasons may have to do with the primary
operating system, Android ([see my earlier article about this|http://soltesza.wordpress.com/2010/06/27/toshiba-a100-smartbook-with-android-but-why/]) but even more can be attributed to the design decisions Toshiba made.
Since these machines are now available in my home country (Hungary)
at quite attractive price points (~$250 USD, some people seem to be
trying to get rid of it soon after purchase) I can't help bumping into
it all the time. Sinc[View post|http://soltesza.wordpress.com/2011/05/09/2011/05/09/how-i-would-make-the-toshiba-ac100-successful/]e
I am a gadget fan, I always have my hand trembling seeing those prices
and I need to cool myself down before doing some impulse-buy I regret
later.
What could make me click on the "Buy" button?
*More memory*
First of all, 1-2GB of RAM instead of the measly 512MB the AC100
hosts. Why the heck tried Toshiba sell a netbook with 512MB of RAM when
ALL of the Atom N450 netbooks seemed to come with 2 GB at that time?
This amount of RAM would allow to slap Ubuntu onto the machine and not
worry about running out of memory when loading up OpenOffice. Ubuntu has
been demonstrated on the AC100 and even looks snappy. (see this [site dedicated to Ubuntu on the AC100|http://tosh-ac100.wetpaint.com/]). Toshiba could easily put 2GB of RAM into the machine without major cost-increase.
*Desktop OS and/or Android*
Putting 1-2GB of RAM into the AC100 would open the gate for using a
proper, netbook-oriented desktop OS which can take advantage of the
form-factor. They should use Ubuntu, since that could be fixed up on
this hardware in no time (especially if they purchase some consultancy
from Canonical).
I don't think that Android needs to stay on the machine but if
Toshiba still thinks it is such a good idea for any user-group, they
could make the AC100 dual-boot, or even better, run both OSes in
parallel (2GB of RAM would make this absolutely possible). Android would
be the light-and-easy OS on the device but the user could any time
switch to a full Ubuntu desktop with an Android launcher icon and start
using OpenOffice or other decent desktop software. The
paravirtualization developed by B-labs would be an [instant solution |http://armdevices.net/2011/04/04/android-virtualization-on-ti-omap4-processors-dual-core-cortex-a9/]for this problem and would future proof the machine for a possible Windows8 scenario later.
*More battery*
The 8 hour runtime of the AC100 is decent enough but more
battery-time is always welcome. The enclosure has a LOT of free/empty
space under the keyboard due to the ultra-compact nature of Tegra2 and
its supporting circuitry. Toshiba should again take advantage of the
form-factor and add one or more extra battery docking bays under the
keyboard which could extend the runtime to 16-24 hours. (Admittedly,
they would make the unit weight much more but since these batteries
would be optional, this decision would be up to the user. A 24-hour
runtime with a 3-battery arrangement would make the AC100 extremely
appealing for a large-set of users. It would be acceptable that the
batteries are charged in series (so the recharge process is lengthier)
so that Toshiba doesn't have to switch to a more expensive power supply.
(Although the power supply issue is probably not a serious cost
factor).
*What else*
Of course, there would be a lot of things to be improved (more USB
ports, higher-resolution display...etc) but I tried to draw up things
which require smaller redesign so that an improved version could be
implemented faster.
I believe the AC100 line could be made really successful and Toshiba should take steps to make this happen.

hi there,
I'm new here and I need support from someone...
I buy notebook toshiba ac100 3 weeks before and I suffer major problem...
something happened with my screen , I press the power button and notebook is running /I can tell from turning on play-multimedia button for music and it plays music/ but the screen is not running !
I try many many things, like only on A/C , only on battery , pushing button for switch between screen and ext.monitor , but unfortunately - the screen was still black !
so I connect to flat tv with HDMI cable, and there you go - i have the screen ot the TV , but only there !
my question is this is problem with the screen or something I do wrong ?!
thank you in advance.
regards.

How can I make a backup from my Macbook Pro?

How can I make a backup from my Macbook Pro?

Basic Backup
For some people Time Machine will be more than adequate. Time Machine is part of OS X. There are two components:
1. A Time Machine preferences panel as part of System Preferences;
2. A Time Machine application located in the Applications folder. It is
     used to manage backups and to restore backups. Time Machine
     requires a backup drive that is at least twice the capacity of the
     drive being backed up.
See Mac Basics- Time Machine. Please visit Pondini's Time Machine FAQ for help with all things Time Machine.
Alternatively, get an external drive at least equal in size to the internal hard drive and make (and maintain) a bootable clone/backup. You can make a bootable clone using the Restore option of Disk Utility. You can also make and maintain clones with good backup software. My personal recommendations are (order is not significant):
1. Carbon Copy Cloner
2. Get Backup
3. Deja Vu
4. SuperDuper!
5. Synk Pro
6. Tri-Backup
Visit The XLab FAQs and read the FAQ on backup and restore. Also read How to Back Up and Restore Your Files. For help with using Time Machine visit Pondini's Time Machine FAQ for help with all things Time Machine.
Although you can buy a complete external drive system, you can also put one together if you are so inclined. It's relatively easy and only requires a Phillips head screwdriver (typically.) You can purchase hard drives separately. This gives you an opportunity to shop for the best prices on a hard drive of your choice. Reliable brands include Seagate, Hitachi, Western Digital, Toshiba, and Fujitsu. You can find reviews and benchmarks on many drives at Storage Review.
Enclosures for FireWire and USB are readily available. You can find only FireWire enclosures, only USB enclosures, and enclosures that feature multiple ports. I would stress getting enclosures that use the Oxford chipsets especially for Firewire drives (911, 921, 922, for example.) You can find enclosures at places such as;
1. Cool Drives
2. OWC
3. WiebeTech
4. Firewire Direct
5. California Drives
6. NewEgg
All you need do is remove a case cover, mount the hard drive in the enclosure and connect the cables, then re-attach the case cover. Usually the only tool required is a small or medium Phillips screwdriver.

My Macbook Pro has become slow and sometimes it hangs. How can I make it work fast and normal.

My Macbook Pro has become very slow and it sometimes hangs. How can I make it work faster and normal? I used Etrecheck and got the report below;
EtreCheck version: 1.9.12 (48)
Report generated June 16, 2014 at 18:05:25 GMT+1
Hardware Information:
    MacBook Pro (13-inch, Mid 2012) (Verified)
    MacBook Pro - model: MacBookPro9,2
    1 2.5 GHz Intel Core i5 CPU: 2 cores
    4 GB RAM
Video Information:
    Intel HD Graphics 4000 - VRAM: (null)
        Color LCD 1280 x 800
System Software:
    OS X 10.9.3 (13D65) - Uptime: 0 days 1:50:52
Disk Information:
    APPLE HDD TOSHIBA MK5065GSXF disk0 : (500.11 GB)
        EFI (disk0s1) <not mounted>: 209.7 MB
        Machintosh HD (disk0s2) / [Startup]: 499.25 GB (465.33 GB free)
        Recovery HD (disk0s3) <not mounted>: 650 MB
    MATSHITADVD-R   UJ-8A8
USB Information:
    Apple Inc. FaceTime HD Camera (Built-in)
    Apple Inc. Apple Internal Keyboard / Trackpad
    Apple Inc. BRCM20702 Hub
        Apple Inc. Bluetooth USB Host Controller
    Apple Computer, Inc. IR Receiver
Thunderbolt Information:
    Apple Inc. thunderbolt_bus
Gatekeeper:
    Mac App Store and identified developers
Launch Daemons:
    [loaded]    com.adobe.fpsaud.plist Support
    [loaded]    com.microsoft.office.licensing.helper.plist Support
User Login Items:
    iTunesHelper
    Dr.Web Light
    Dropbox
Internet Plug-ins:
    SharePointBrowserPlugin: Version: 14.0.0 Support
    FlashPlayer-10.6: Version: 14.0.0.125 - SDK 10.6 Support
    Flash Player: Version: 14.0.0.125 - SDK 10.6 Support
    QuickTime Plugin: Version: 7.7.3
    Default Browser: Version: 537 - SDK 10.9
Safari Extensions:
    iGetter Extension: Version: 2.9.2
Audio Plug-ins:
    BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
    AirPlay: Version: 2.0 - SDK 10.9
    AppleAVBAudio: Version: 203.2 - SDK 10.9
    iSightAudio: Version: 7.7.3 - SDK 10.9
iTunes Plug-ins:
    Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
User Internet Plug-ins:
    iGetter Plugin: Version: 2.9.2 Support
    iGetterScriptablePlugin: Version: 2.9.2 Support
3rd Party Preference Panes:
    Flash Player Support
Time Machine:
    Time Machine not configured!
Top Processes by CPU:
         4%    Dropbox
         3%    WindowServer
         0%    fontd
         0%    Microsoft Word
         0%    Microsoft Excel
Top Processes by Memory:
    242 MB    drwebd
    176 MB    Dropbox
    147 MB    Dr.Web Light
    86 MB    WindowServer
    82 MB    App Store
Virtual Memory Information:
    43 MB    Free RAM
    1.68 GB    Active RAM
    1.65 GB    Inactive RAM
    641 MB    Wired RAM
    421 MB    Page-ins
    0 B    Page-outs

Meli070,
uninstall Dr.Web Light.

How can i make an restore disk on Satellite L850-10J

Hello,
Iv'e bought an Toshiba Satellite L850-10J.
In the box it doesnt come with an CD...
So i tought it was in my PC an image of the DVD for me to burn on a blank DVD.
I didnt find it, please tell me where can i find it.
Thanks.

Hi
>How can i make an restore disk
This should be mentioned in user manual which is always preinstalled.
In my case I used the preinstalled +Toshiba Recovery Medium Creator+ software.
This Toshiba software allows you to create either an recovery disk or an recovery flash memory stick.

How can I make my toshiba c55-8350 windows7 laptop touchpad to work again?

Similar Messages

Maybe you are looking for