How can I make my wireless keyboard "discoverable" after replacing the batteries?

How can I make my wireless keyboard "discoverable" after replacing the batteries? Bluetooth keyboard setup said my  "keyboard is not connected" when I turned it on today.....assuming the problem was batteries, I replaced them.

I've got it working now.....

Similar Messages

  • How do I make my wireless trackpad discoverable?

    How do I make my wireless trackpad discoverable?

    Hello Shari BSW,
    Welcome to Apple Support Communities.
    You can take a look at the Quick Start Guide:
    Magic Trackpad Quick Start Guide
    http://manuals.info.apple.com/MANUALS/1000/MA1544/en_US/Magic_Trackpad_UG.pdf
    Pg 4 has instructions for pairing and removing a paring. When the Magic Trackpad is not pared with a computer, turning it on puts it into discovery mode automatically (pg 3).
    Regards,
    Jeff D.

  • How can I get my wireless keyboard battery access to open. It's like the bloody thing has seized up and won't open?

    How can I get my wireless keyboard battery access to open. It's like the bloody thing has seized up and won't open? Tried the coin...nope.  Tried a screw driver...nope! Even tried WD-40 - nope! Or does this mean it's now in the boat anchor pile!

    They are designed for coins... is this your first time changing the battery? Make sure you are twisting in the right direction and make sure you are pushing down on it and applying pressure at the same time you turn.

  • How can i connect a Wireless Keyboard and a Trust mouse with a brand new Mac mini?

    How can i connect a Wireless Keyboard and a Trust mouse to a brand new Mac mini?

    Go to the Bluetooth icon on the menu bar and select "Set Up Bluetooth Device". Follow the wizard.
    Alternatively, if you haven't yet unboxed and setup the Mini, you can pair the keyboard to the Mini (and possibly the mouse). However, I would set up with a USB keyboard and mouse and pair the Bluetooth devices afterwards.

  • How can I make Terminal run Java 7 downloaded from the Oracle Website?

    I've downloaded Java 7 from the Oracle website, and I want the Terminal application to run that Java 7 download. I try to run Java programs that require Java 7, but it runs with the Apple Internal Java 6 release. How can I make it so my MacBook Pro runs the download of Java that I downloaded? I know this sounds stupid, but am I routing my machine to run the internal Java 6 version? I have seen many videos in which people with the same software version as me run Java like this with no problem. Could you please let me know why this is happening and how I can fix it? I really want to be able to use the Java 7, particularly because I'm always getting this "Unsupported Major Minor Version 51.0" from many applications that are Terminal based.
    Thanks!

    I think I've answered your question. The Oracle JRE is a web plugin. The JDK is a development kit for applications with embedded Java. Neither one replaces the Apple-distributed Java frameworks for running standalone applications without embedded Java. Any other questions you have should be answered by the Oracle documentation.

  • How can i make apple mail dislay message body to the left not below the mes

    How can i make apple mail display message body to the left not below the messages
    headers pane ? something like outlook

    There is a plugin to do this in Leopard but currently its not compatible with SL however you might like to try the beta release which has preliminary support for 10.6:
    http://www.macupdate.com/info.php/id/21899

  • How can I make my Introduction_mc automatically disappear after 10 Seconds and load Home_mc?

    Hi,
    How can I make my Introduction_mc automatically disappear after 10 Seconds and load Home_mc (automatically)? I don't want user to change by himself this Introduction page. It should be done automatically.
    What is the procedure and code to achieve it, please?
    Thanks.

    Hi,
    I gues you are using AS2.0, then use setInterval, in AS3.0 user Timer Class.
    AS2.0
    var interval:Number = setInterval(doThis,10000);//in milliseconds
    function doThis():Void{
    //do something;
    AS3.0
    var timer:Timer = new Timer(10000, 1);
    timer.addEventListener(TimerEvent.TIMER_COMPLETE, onTimerCompleteHandler, false, 0, true )
    function onTimerCompleteHandler(event:TimerEvent):void{
    //do something;
    For details: http://blogs.adobe.com/pdehaan/2006/07/using_the_timer_class_in_actio.html
    Warm Regards
    Deepanjan Das
    http://deepanjandas.wordpress.com

  • How can I get my safari to open after installing the new Mavericks operating system?

    How can I get my safari to open after installing the new Mavericks operating system?

    Thanks Carolyn. Unfortunately, this didn't work. It turned out to be in my display monitor as I have my computer wired to my tv for streaming. Once I changed the monitor display it worked fine. Go figure

  • How can i install a wireless keyboard to my apple tv

    someone please help me, i really don´t have idea how to make my wireless keyboard work with the apple Tv

    You can't.

  • How can I make Firefox recognise that I have changed the DNS servers to use?

    After I edit /etc/resolv.conf to make my computer use more reliable DNS servers, Firefox doesn't notice until I restart it. How can I make Firefox notice the change without restarting it?

    I discovered that I can do this by ticking Work Offline in the File menu, and then immediately unticking it again.
    (I believe this mimics what would happen if the operating system disconnected and reconnected from a wireless network, which would be a situation where Firefox would need to check for new DNS servers. So that explains why it works.)

  • How can I make a tent with two halves of the info ( and pictures one direction and the other half the opposite direction ( towards each other of course)

    How can I make a table tent in PAGES with both halves of the info and pictures turned towards each other?  I can figure out how to turn just the picture upside down  AND the text sideways, but not upside down with the picture included so that it is at the top and not the bottom! 

    Layout the picture and text (in text boxes) the way you want them in the lower half of the page. Then Select All and Group them. With the Group selected, type Cmnd+D to duplicate it and then hold down the Shift and Command keys and grab a corner box (you’ll see a double headed arrow) and rotate the box until it’s upside down. (Holding down the Shift key will constrain the rotation to 45 and 90 degree positions.) Now drag the box into position in the top half of the page.
    Walt

  • How can I make a report for a mistake in the Dictionary application of the iPhone?

    When you highlight something you've written and then you press on "Define"... there is a mistake in one of the entries of the dictionary....How can I make a report to Apple?

    http://www.apple.com/feedback/iphone.html

  • How can I make playlist changes on my iPhone 6 the default sync with iTunes?

    I'm far more often using my iPhone to make iTunes purchases and make changes to my playlists- how can I make *these* the default settings by which iTunes syncs? I have iTunes match, iCloud, etc. Mainly I'd like to easily have iTunes match my iPhone changes, and then when I sync my iPod nano via usb, have the iTunes (ergo iPhone) changes made to the iPod.
    Thanks in advance!

    I'm far more often using my iPhone to make iTunes purchases and make changes to my playlists- how can I make *these* the default settings by which iTunes syncs? I have iTunes match, iCloud, etc. Mainly I'd like to easily have iTunes match my iPhone changes, and then when I sync my iPod nano via usb, have the iTunes (ergo iPhone) changes made to the iPod.
    Thanks in advance!

  • How can I get my wireless keyboard and my new magic mouse to enter info into a Christmas list app on iphone 3GS? Do I have to move to another room? I have bluetooth on in my iPhone.

    I have wireless keyboard and a new magic mouse. I want to enter data into a Christmas list app on my 3GS iPhone. Too time consuming to just type on iPhone keyboard. How can I get keyboard and mouse to be 'connected' or recognized by my iPhone? I have Bluetooth "on" in my iPhone.

    You cannot connect the mouse.  This is not a feature of iphone
    You can learn about connecting a keyboard in the manual:
    iPhone User Guide (For iOS 5.0 Software)

  • How can I past my wireless keyboard if I can't get last the lock screen?!

    Batteries went dead so I out freshies in...now what ! Can't type cuz the keyboard can't pair! Help please.

    It's always best to have a backup USB keyboard, go to the local office supply store and pick one up.  Just a very inexpensive model will do the trick.
    To learn how to troubleshoot with only the wireless keyboard please click http://support.apple.com/kb/ts3048'
    Good luck.

Maybe you are looking for

  • Deploy app.

    Hi. When I try to deploy my app to standalone Weblogic server then I have error: [Deployer:149140]The task cannot be processed further until the current edit session is activated. When this occurs, task processing will continue. The user can exit the

  • Chris Meyer - Creating Motion Graphics CS5 vs CS3

    I am looking at purchasing the Chris Meyer "Creating Motion Graphics with After Effects" book. The 2007 edition for CS3 is significantly cheaper than the 2010 edition for CS5. Since the CS5 version is already out of date, would I be missing any signi

  • File system cache on APO for ATP

    Hi, aces, Do you have any recommendation percentage of file system cache on AIX for APO/ATP environment?  My system was configured to be 20% min -80% max.  But I am not sure if this is good for APO/ATP. I suspect the file system cache takes a lot of

  • RotoBrush Tool (Applications & Techniques) ~ HELP WANTED ~

    I have recently been attempting to use the rotobrush tool to apply a background in some video footage. I am having trouble making the effect last over time. I want the effect that I map out to apply throughout the composition and it seems to just be

  • No users available in the change period (Create Business Partner)

    Hello! I would like to set up the business partners for Service Desk. If I choose the solution and execute "Edit --> Create Business partner" no useres are shown under the system. If I change the data selection for an earlier time or blank, the situa