How can i make network between two databases ?

Good Morning to all ;
Going to configure oracle 10g - ( I trying to exchange data between two different databases.
Each database is configured in different operating systems.
For ex : one database from windows XP(seperate virtual machinne)
one database from linux rhel (seperate virtual machinne)
I am waiting for some suggestions ..
Thanks ..
Edited by: 969352 on Mar 19, 2013 10:04 AM

969352 wrote:
What virtualization product are you using?*#* vmware-toolbox-cmd -v
8.1.3.9911 (build-203739)
VMWARE Product Information :
Version : 7.0.0 build - 203739
OK. You will need to make sure the ip addresses you assign to your vms are in the same subnet as the adapter create by the installation of vmware. Once you get the fundamental network setup fixed, you can treat these vms just like any machine in your data center. Forget the vm console and access them exactly like you would any remote server -- putty for the linux machine and Windows Remote Desktop for the Windows machine.
At a command prompt on the host, issue this:
c:> ipconfig -allYou will get back info on several net adapters, two of which are identified as being with vmware -- vmNet1 and vmNet8. Note the IP addresses of both. We'll need it later.
You will also need to know how you configured the network adapters on your vm's -- NAT, bridged, hostonly, ???
Note that these issues are out of scope for this forum. I don't mind helping, but I no longer have a vmware installation to reference details.
What have you actually tried to do? ( Data Transfer )I tried to exchange data from windows database to linux DB
That's pretty vague. Exactly how did you try to "exchange data"? A sql statement using a db_link? export/import? Carrier Pigeon?
>
Where are you stuck?
I don't know , how to configure ip and necessary information for windows database.
Configuring an IP address is purely an OS admin issue and is out of scope for this database forum.
Google is your friend, but only if you use it: [url http://lmgtfy.com/?q=configure+windows+ip+address]http://lmgtfy.com/?q=configure+windows+ip+address
>
That's it Edstevens .. thanks ..

Similar Messages

How can i make iphone mobile website, database in Sql Server 2005 ?

how can i make iphone mobile website, database in Sql Server 2005 ?
Thanks & Regards
Jamshed Ali
Email id: [email protected]

You need to be a little clearer in what you're asking.
You can't make any web site in SQL Server - it's a database engine, not a website tool.
What you can do is create web sites that pull data from a back-end SQL Server, but the SQL server doesn't handle the client connection at all (that's handled by a web server such as Apache, IIS, or similar).
There are many ways to build such a site including .NET, PHP, Perl and more (although I don't know all the options for Windows servers because they're not as common outside of corporate/enterprise networks).
In either case, given your choice of development language (HTML, plus one of the PHP/Perl/.NET/etc. options), plus your database (SQL Server) plus your web server (IIS, Apache, etc.) you can make any web site you like (or, at least, you're capable of developing).
If you want to opimize that web site for iPhones then there are many references on how mobile browsing differs from the desktop. I'd recommend this book as a reference (and, yes, I understand the irony of linking to a paperback book for web design guidance ). Googling mobile web design (or iPhone web design) might yield more results.

How can i make calculation in two file using two parameter

how can i make calculation in two file using two parameter
Solved!
Go to Solution.

i am having two differnt file, both file having no and time , i want to make programme that when, number and tiome is same in both file give that index onle in , i am going to attached the file
Attachments:
iisc11-jan2010extract.txt ‏1253 KB
sp3.xlsx ‏12 KB

How can i get report between two dates?

Hi
how can i get report between two dates?
for example i want get reports between 20/4/2002 & 27/4/2002.
my table has date column and i can get first date( exam : .... where date:=a and/or ....i don't know this part)
thanks alot.
Regards
The Oracle Reports Team
http://otn.oracle.com/

where exam_date between :from_date and :to_date
from_date and to_date are user_parameter

How to to make Cluster between two server 2012 Datacenter with share storage and Hyper-V role then install Exchange 2013 on each server datacenter then make DAG between Exchange servers

Dears,
I have IBM Flex server with built in storage,
HOW to to make Cluster between two server 2012 Datacenter with share storage and Hyper-V role then install Exchange 2013 on each server datacenter then make DAG between Exchange servers?
If there any prerequisites of the Share storage types ?and any configuration guide to deploy Cluster between two Server 2012 datacenter ?

Microsoft Failover Clusters require shared storage. If you wish to create a failover cluster with local storage, you need to use third party software to mirror the disks and present it to the hosts (siog.com, datacore.com, starwind.com). If you
use third party software, you will need to follow their instructions for configuring the environment.
Questions on how to configure Exchange environments are better asked in an Exchange forum.
.:|:.:|:. tim

How to ...synchronization between two databases

Hi,
I want to set up automatic synchronization between two databases. For example, database DB1 and DB2 have table t1 and t2 with the same columns. If someone updates a record in table t1, I want automatically update the record in t2 or vice-versa.
How can I make an automatic system like that?

1) What is the business goal you're trying to satisfy? Failover, reporting, replication, geographic co-location, etc. each have their own set of technologies. Explaining what you're trying to accomplish from a business perspective will help us identify which technology (or technologies) to focus on.
2) Are you synchronizing a single table? Or multiple tables? Or all the tables in a schema? Or all the tables in a database?
3) Is there a stable network connection between the boxes?
4) What version of Oracle do you have (10.2, 10.1, 9.2, 9.0.1, etc)? What edition (standard, express, enterprise, etc)?
5) How quickly after a change has been made on DB1 does the change need to reflect on DB2?
6) Am I correct in understanding that you want to be able to change the same row of data on either DB1 or DB2? So the replication needs to go in both directions?
Justin

How can i use eyedropper between two different art board.

Hi
How can i apply the same color for the images in two different art boards with eyedropper.
I am trying to apply the same color from the image in one art board to another image in another art board.
Can any one help me please. Thanks
Steve
I am using Mac

apresslink,
Presuming you are unable to use the Eyedropper Tool normally, in other words keep the target object selected while you pick up the colour, by having the Artboards open in adjacent windows to ClickDrag between (I am still with 10 which may explain at least part of my ignorance for which I apologize):
Until someone presents a smarter solution, you may cheat and create a carrier object beside the source object, drop the colour in that, cut and paste it to be beside the target object, and drop the colour there. With multiple colours to drop multiple times, you may create a palette to hold them, to use just like a painter working on several canvases at the same time. Or you could paste diminshed copies of the source objects.

How can I share data between two forms on different lists

Using a custom content type, I created two lists that I want to share the same data - one is a calendar. Our employees complete a form from the "Out of Office Request" list that has workflow functionality that sends an email to that person's
manager. If the manager approves the request, the item automatically populates the "Out of Office Calendar." The problem is that the only information from the request list that populates the calendar is the Title field and date/time fields.
I need the manager name in order to create a view for each manager.
How can I connect the other information in the request list to the calendar list. It seems to me that if the title and date fields carry over the information, there should be a way to connect the other information. I'm using Designer.
I've tried to connect the two lists' webparts with the wizard, but when I get to the page that maps the two lists, there are no column names and the "Next >" button is grayed out. This seems like the logical place to connect the two lists,
but it isn't working.

Hi,
According to your post, my understanding is that you wanted share data between two forms on different lists.
To show external information on the calendar event, there are two methods: Calculated column, workflow. You can refer to:
A Simple Guide to Show More Information on a Calendar Event
I recommend to use workflow to achieve what you want. But you need to create a people column to display the manager.
You can create a workflow associated to the "Out of Office Request" list, add action to Start Approve Process. If the manager approves the request, you can create a item in the calendar, and then update the people column and the title column.
Then the calendar will display the Title, date/time and the manager.
To create a view for each manager, you need to modify the Filter. You can use the people column is equal to the manager name or the Title contains the manager name.
Thank you for your understanding.
Best Regards,
Linda Li
Linda Li
TechNet Community Support

How can I pass value between two pages or fragments?

Hi,
I am learning ADF nowadays. Now I come across the following problem.
There are two pages or fragments in a bounded task flow, e.g. PageA&PageB. There is an inputtext on PageA.When I press an button on PageA with an action jumpping to PageB I want pass the value of this inputtext to annother inputtext, which is shown on PageB. Moreover, the inputtext on PageB comes from a ViewObject. How can I achieve this goal? Any ideas or suggestions?
Best wishes!
Eleven.Xu
Mar 27th.2009
Edited by: Eleven.Xu on 2009-3-26 下午7:03

RequestContext requestContext = RequestContext.getCurrentInstance();
requestContext.getPageFlowScope().put("var_name", value);
String value = (String)requestContext.getPageFlowScope().get("var_name");
if you open a new window, the value will be null.

How can I communicate between two computer via RS 232 port?

I would like to communicate between two computer in order to servo a motor motion to an acquisition.
Thank you in advance for your answer an your solutions

PreScript: I did not rate the above answer!
Here's a VI I use to test my instruments - if you have it running on both PCs, you should be able to communicate (with the help of a Null modem between them - cross Rx and Tx) - hopefully this will get you started.
cheers,
Christopher
Christopher G. Relf
Certified LabVIEW Developer
[email protected]
International Voicemail & Fax: +61 2 8080 8132
Australian Voicemail & Fax: (02) 8080 8132
EULA
1) This is a private email, and although the views expressed within it may not be purely my own, unless specifically referenced I do not suggest they are necessarily associated with anyone else including, but not limited to, my employer(s).
2) This email has NOT been scanned for virii - atta
ched file(s), if any, are provided as is. By copying, detaching and/or opening attached files, you agree to indemnify the sender of such responsibility.
3) Because e-mail can be altered electronically, the integrity of this communication cannot be guaranteed.
Copyright © 2004-2015 Christopher G. Relf. Some Rights Reserved. This posting is licensed under a Creative Commons Attribution 2.5 License.
Attachments:
Test_RS-232_Serial_Communications.vi ‏118 KB

How can I share calendars between two different people?

I am trying to share my ICAL with my wife and she wants to do the same with me. For some reason I cannot find the path to allow us to see each otjer's calendars. Any ideas?
Thanks
Don

Hi,
According to your post, my understanding is that you wanted share data between two forms on different lists.
To show external information on the calendar event, there are two methods: Calculated column, workflow. You can refer to:
A Simple Guide to Show More Information on a Calendar Event
I recommend to use workflow to achieve what you want. But you need to create a people column to display the manager.
You can create a workflow associated to the "Out of Office Request" list, add action to Start Approve Process. If the manager approves the request, you can create a item in the calendar, and then update the people column and the title column.
Then the calendar will display the Title, date/time and the manager.
To create a view for each manager, you need to modify the Filter. You can use the people column is equal to the manager name or the Title contains the manager name.
Thank you for your understanding.
Best Regards,
Linda Li
Linda Li
TechNet Community Support

How can I transfer data between two while loops in parallel

Hello,
I have two while loops in parallel and I want to transfer data from the first to the second loop. The problem isthat data are transfered only when the first loop ends. I tried with queue but it doesn't work. How can I do, preferentially without global variable ?
Thanks.

I join a very simplified VI's because the real works with PXI, RT, ...
When you run the "secondVI.vi", no data comes in array from the "firstVI.vi".
As I said in my first message, I tried with queue too but it doesn't work, because when the terminal go out from the while loop, while loop have to be ended to send data.
Attachments:
transfer_data.zip ‏20 KB

How can you remove clustering between two BO XI 3.1 Servers

Hi,
Servers A and B have been clustered before and because we have done so many changes to each of the servers, we thought of uninstalling everything from both servers and reinstall BO XI 3.1 server on each.
Installed BO XI 3.1 server on Server A, applied SP2 and this worked fine.
Installed BO XI 3.1 server on Server B, applied SP2 and this worked fine too.
We performed the installation using most of the default settings e.g. port number on both servers (nothing on setting them up as clusters).
However, when we checked the Settings on both CMCs of our BO XI 3.1Servers, there was information under the Cluster Tab as follows and these were on both servers' CMCs:
CMS Name: ServerA.cms (ServerA.ourdomain:6400)
Cluster Name: @ServerB.ourdomain:6400
Cluster Members:
ServerA.cms (ServerA.ourdomain:6400)
ServerB.CentralManagementServer (ServerB.ourdomain:6400)
Question: How can we remove clustering from both servers (we do not want it in the first place and we did not think we set it up when we reinstalled BO XI 3.1 on each).
Hope someone can help us.
Thanks.
Edited by: boxidhf on Apr 14, 2010 8:18 AM
Edited by: boxidhf on Apr 14, 2010 8:19 AM
Edited by: boxidhf on Apr 14, 2010 8:19 AM

This is the high level procedure.
1. STOP SIA on the server to be removed say X.
2. Delete all the servers that belong to X from CMC.
3. Delete the SIA on X and un-install.
There are some key points to watch out for- you can check the admin guide..but at a high level this is the process i have followed in the past.

How can I sync firefox between two macs: cannot fond the add a device buttom!

In the instructions found in help in order to set up firefox sync a device must be added. However in the preferences <I do not finf the Add device buttom. Any suggestion?

Hi!
Unfortunately your message is incomplete.
Take a look to this article and let me know if it doesn't help: [[How to sync Firefox settings between computers]]

How can i use cmr between two EJB which are belong to different database?

Perhaps, on the EJB's Entity tabs, in the Deployment settings dialog, you could make sure each bean references a different DB (Change the JNDI name, under Database settings).
However, I don't know this for sure - you may have to use bean-managed persistence.

How can i make network between two databases ?

Similar Messages

Maybe you are looking for