How can I make sucesfuly a DVD on Final Cut Pro

Hi I wonder wo can help with this problem

If you have finished a project export it as a quicktime movie...the higher the quality of this movie, the better will be the quality of the DVD you get. I have found out that the codec Pro Ress 4444 gives a high quality of DVD than a movie with a Pro Ress 422 {HQ} codec.
After you have your exported movie, right click upon the file and click the option burn to disc...see the screenshots given below:
Happy burning!
DR.SOMANNA

Similar Messages

I can't burn a normal dvd from final cut pro.Help would be much appreciated!

Hi.I am having great difficulty burning my final cut pro project to dvd.It is shot in HD and I have compressed it but when I burn a dvd it will not play in a normal/standalone dvd player.Could someone please tell me how to burn my project to dvd.Can HD film be burned to a normal dvd?The final cut pro file is only 1.3 GB.Any help/advice is much appreciated.Thank you.

>Could you please tell me what the best settings to use when compressing to quicktime or if infact it has to be done at all?
Matt has already told you twice; his first response (above) gave you step-by-step instruction.
I'll spell it out for you again but with slightly more detail:
1. In FCP, render the Sequence fully, then go to File->Export->QuickTime Movie. (do NOT use "Using QuickTime Conversion). In the export window, do NOT Recompress All Frames. You can chose to make the movie self-contained or not.
2. Use the resulting file in Compressor, where you will chose a DVD preset appropriate for your video's duration. If needed, you can duplicate then modify any preset to better suit your needs. Compressor will create two files; an MPEG-2 video file (.m2v) and a Dolby Digital audio file (.ac3).
3. Use the two files created by Compressor in DVD Studio Pro to author and burn a DVD. Do NOT author an HD DVD as these will not play in DVD players.
-DH

How can I publish the "levels" effect to final cut pro x?

Hello,
I'm trying to publish all of the color correction plugins from motion into final cut pro x, the "levels" effect in particular. I have read the instructions in the manual and published all the parameters and then saved it to send it over to final cut pro x but the problem that I'm having is when I open it up in final cut pro x all the parameters are there except for the histogram and its controls, what am I doing wrong and how can I fix it? Thanks.

The short answer is you can't publish the levels graphic UI (you can, but it doesn't work in FCPX - all you get is the collection of the individual slider controls.)
You can create a shape with a gradient fill. Set a middle color tab and a second opacity tab. You can use Link parameter behaviors from the color/opacity tabs to the the filter > Levels parameter controls. Use the color tabs for Black In, Gamma and White In. Use the Opacity tabs for Black Out and White Out.
You can publish the shape's gradient.
The problem is, to publish this UI, you're publishing an actual gradient and people will be able to make alterations to the gradient (it won't change how it operates the levels controls.) The other problem with it is that it is possible for users to accidentally pull off or add new tabs which will immediately break the effect (and immediate "undo" should repair it though). Then, figuring out how to manipulate the Gamma control is going to be a trick (I haven't figured out yet.) The values go from 5 (all the way left) to 0 (all the way right - with 1 the 50% mark) for the Gamma control itself, but the UI controller (the middle tab on the gradient) moves the control in the opposite direction and the values are logarithmic in scale. You can use the mid-tab control on the gradient linked to the gamma parameter value, but it won't behave the same way as you would expect a genuine levels control to behave (left to right goes from black to white when the expectation would be the opposite.)
A gradient with links into the filter is about the only way to go if you want it give it a shot.

How can I automate log and capture in Final Cut Pro

Does anyone know of a way to schedule the log and capture of video in Final Cut Pro with a script or software application, so that it doesn't have to be done manually?
I am using a capture card in my Mac to record college lectures for our department and it's not always possible for me to be there to start the capture. Our lectures occur on a regular schedule.
I am a new Mac user and I'm also new to Final Cut Studio 2. Thanks for any help on this topic!

In Automator, all the apps you can automate are listed in the far left hand pane. Click on the QT Player icon there to see the "Actions" available for it. In that list you should see "New Video Capture" and "Start Capture". First drag "New Video Capture" to the big pane on the right, where you assemble your workflow. Then drag the "Start Capture" action beneath that. You're basically done.
How to Save and Schedule this can be found in the Automator Help, when you search on "iCal":
1. Choose File menu > Save As Plug-in.
2. Choose iCal from the "Plug-in for" pop-up menu.
3. Click Save. Automator opens iCal and creates an event that calls the workflow at the scheduled time.
4. Name your event and set the date and time for the workflow to run using the pop-up menus in the info drawer.
You'll need to do another "workflow" to Stop the recording. All you need is the "Stop Record" action in the workflow - then save the same way as listed above.
Just note - I've used this process before and the QT movie generated, despite being recorded as "Camera Native" - was not editable in FCP. In fact, I don't even think I could import the final QT into FCP - let alone edit it. If editing's necessary maybe someone else can offer up another step to enable it. It was not necessary for my exact application, so I never explored it.
Good luck.

How can I get MPEG-2 video into Final Cut Pro X?

Hello! I have several MPEG-2 video files on which I need to perform some edits. When I tried to import them into Final Cut Pro, I learned that Final Cut Pro can't import MPEG files. Okay, so I went into QuickTime and exported one as 720p. 20 minutes later, I had a video that I could load in FCP. Awesome. Except that when I watched the video, the audio was waaaaaaaay out of sync. So, is there a different way I could get this MPEG-2 video into a format that FCP will like while keeping video and audio together?
I would keep trying a few different things without direction, but these videos are like 90 minutes long and the conversion process is lengthy.
Thanks!

Although I looked up the equipment, I couldn't find what kind of MPEG2. I'm assuming program stream.
I don't know why you had the sync problem with QT. You could bring it into FCP and detach the audio and manually line it up it's off by a constant amount.
Or you can use MEG Streamclip. You will also need the playback component, which is $20. Follow the instructions on the Squared 5 site to install it. Streamclip is worth having even if you don't use it this time around.
Good luck.
Russ

How can you fix corrupt Project Files in Final Cut Pro X?

Hello All,
I have reason to believe that one of my project files in Final Cut Pro X is corrupt.
How may I begin to resolve this issue? Is there a third party software someone could recommend, like Digital Rebellion (if they have software for FCP X, I'm not sure) that may improve, if not hopefully solve this issue?
Many thanks!!
Molly

Had a similar problem.
Follow it here:
http://www.fcp.co/forum/4-final-cut-pro-x-fcpx/11076-freeze-during-export
among other steps taken I used Corrupt Clip Finder to isolate/remove the culprit and all was OK after that
no idea how/why the file ( which I''d been using over 5 previous versions) became corrupted

How Can I do an export that from Final Cut Pro 7 that is specific to these settings?

Hi
I am current trying to export out a movie from Final Cut Pro 7 but the settings that are required are very specific and I was going to try it through compressor as well but I wasn't sure if that would work either.
Here are the settings:
HD:
1 Video CODEC                 XDCAMHD50
2 Wrapper format           QuickTime Self-Contained
3 Bit rate                              50 Mbit/s Constant Bit Rate (CBR)
4 GOP                                   Long GOP
                                             Closed GOP
5 Time code                       Must include embedded time code. Start-timecode: 10:00:00:00
6 Movie version               UK Home Video Version
7 Delivery time                 As per contract. Supplier to specify filename, delivery format and estimated time of arrival via email at least 60 days before                                                           transmission unless otherwise specified in contract. This should be accompanied by an IMDB link.
1 HD video format           720 line progressively scanned (720p) @ 50Hz (25 FPS)
                                          1080 line interlace scanned (1080i) @ 50Hz (25 FPS)
2 Resolution                      1280 x 720
                                           1920 x 1080
3 Aspect ratio                    Content should be 16:9, however 4:3 will be accepted on exception (such as for older movies shot in 4:3)
4 Graphics                           Must be within 16:9 safe graphics area (EBU R95-2000)
5 Chroma format              4:2:2
1 HD audio format           24 bits/sample 48 kHz sampling rate
2 Track layout                    Track 1 – 2.0 Stereo L mono
                                            Track 2 – 2.0 Stereo R mono
                                            Track 3 – L
                                            Track 4 – R
                                            Track 5 – C
                                            Track 6 - Low frequency effects LFE
                                            Track 7 – L Surround
                                            Track 8 – R Surround

First of all, what are your sequence settings? Looks like they want stereo AND dolby 5.1 audio tracks embedded in the quicktime (I've delivered a few films like this). Do you have a surround sound mix?
You will almost always have more options and control in compressor over fcp so that's the way I'd go, but not sure compressor will give you the ability to match these specs.
Do you understand about safe zones for graphics? If not, post back.
I don't see any option to set the GOP in xdcam in compressor. This may be built in to the xdcam format.
I don't see any option for 720 xdcam hd in compressor.
There are many other tools available for this kind of work, but they may be out of your price range. You might want to just find a facility with experience in deliverying this sort of thing.

How can I change the folder where the Final Cut Pro X files?

I've tried dragging it to the new destination, but the program doesn't seem to recognize the moving process and lost the thumbnails and the reference to the files. Is there any other way?

Tom,
Thank you for your fast answer.
Not copying folders... well I did not copy folders, I copied 4 entire drives of 4 Tb. I don't imagine moving events and projects one by one with FCPX tools. Unless it is the only way but that will take me 4 days.
Here is a screenshot of the root level of the Pegasus.
No, i do not copy the media files in the event folders.
Yes the Pegasus drive appears in FCP. I use it for actual new project with the media in specific folders for each project. Everything works fine.
Playback is set to original media.

S10e: How can I make my external DVD being detected to boot Recovery System

I bought an IDE-USB Adapter and connected a DVD to the Netbook. But the device is not found even by the BIOS, too.
So I can not install the System. In addition there will be no BIOS update available for LINUX to detect DVD drives if this is the problem.
How can I make my Recovery DVD run on my Lenovo Ideapad S10e?
Solved!
Go to Solution.

You use a normal 5 1/4 " DVD/CD drive,.it needs 12V dc did you powered the drive... ?
So the adapter is not recognized, thats bad ....the usb-ide adapter is defective....
The second question is...
Linux cant use any .exe files ...its not windows... thats normal...
so what will you install on it ?
Biosupdate ? is the only one .. i think.. but that is a problem for lenovo... i didnt see an biosupdater under linux
Why you buy those expensive ide-usb adapter ?
you can get a slimline cd usb drive is available for 25 $ (or 25€) on online shopper...
and you dont need a power adapter ...
Greets KalvinKlein
Thinkies 2x X200s/X301 8GB 256GB SSD @ Win 7 64
Ideas Centre A520 ,Yoga 2 256GB SSD,Yoga 2 tablet @ Win 8.1

I have a DVD Acrobat Pro 9. I upgraded laptops and trying to install but the DVD is not readable. How can I get a new DVD or Download Acrobat Pro 1. The product is registered and I have the serial number. PS: Contacting Adobe on this issue is impossible..

I have a DVD Acrobat Pro 9. I upgraded laptops and trying to install but the DVD is not readable. How can I get a new DVD or Download Acrobat Pro 1. The product is registered and I have the serial number. PS: Contacting Adobe on this issue is impossible... direct support stinks.

Download AA 9 Pro from http://helpx.adobe.com/acrobat/kb/acrobat-downloads.html. Make a new backup for your archive. You might also take the DVD to your library to see if it is a drive problem. You might also carefully clean the DVD with water and soap (do not use anything that would scratch the surface or you have destroyed it for sure) and see if that solves the problem. This is particularly an issue if you have finger prints or other crud on the DVD. However, it could also be a bad drive as I mentioned. Hopefully the download solves your problem in any case (I would backup the download to CD and/or backup HD).

How can I make ringtone longer before answer machine cuts in?

How can I make ringtone longer before answer machine cuts in?

Doesn't matter, carriers determine time before voicemail kicks in.

When exporting to a DVD from Final Cut Pro X, what settings are there to make sure you making the highest quality DVD possible?

When exporting to a DVD from Final Cut Pro X, what settings are there to make sure you making the highest quality DVD possible?

There have been a lot of recent reports of difficulties sharing to DVD, but haven't been hearing about unreadable disks. Posibly there was an encoding error. Or it could have been bad media (blank disk).
Does it play in your Mac?
What brand of disks are you using?
Russ

How do i burn a dvd using final cut pro x

how do i burn a dvd using final cut pro x?

Use the Share button at the far right end of the Toolbar or File>Share>DVD.

How can you create a swish pan in Final Cut X?

How can you create a swish pan in Final Cut X?

Andy's - http://andymees.wordpress.com/swish-transitions/
How's that for service?
Cheers!

Trouble burning DVD in Final Cut Pro X (stops at 66%)

I have been trying to burn a DVD on Final Cut Pro 10.1.4, but I find that it always stops the burning process at 66%. An error does not pop up; it just simply stops at the same place every time. I have tried burning different projects of different lengths, I have tried updating Final Cut, I've restarted the computer, and multiple other things that I've seen others have said worked for them, but every time it always stops at 66%. I have been able to burn about 6 or 7 DVDs successfully before this problem started happening, but now I can't get a single one to work.
I seen where some said that this was a common problem in Final Cut when FCP X will hand the job to Create Disc to actually start the burn process, but I don't know how to fix it.
I've tried so many different processes to make it work; could someone please help!

Thank you for the reply! I've been trying to burn each disk without an image for the menu, but I actually even seen where someone had said just to go into it and add a small picture for the background and then delete it and then hit share and that might get it to work. I've tried doing that multiple times, and it hasn't made a difference. It still stops at 66%. I didn't know if there was anything else I could try that might fix it.

How can I make sucesfuly a DVD on Final Cut Pro

Similar Messages

Maybe you are looking for