How can I make the edited photo appear in my folder?
Hi! This is my first post here, and I've just acquired Lightroom after having worked with ACDSee Pro (currently v6) for some years. I love taking photos and editing them later if necessary.
I understand that LR works differently to ACDSee, with the catalogue and all, and I've successfully imported my picture folders into my new LR catalogue. What I haven't yet been able to grasp is what LR does with my edited photos. When I edit (develop) a picture in ACDSee, the edited version of that photo appears in my original folder as soon as I have finished editing it.
With LR, after having done my processing all I can see in my folder is the original, unedited picture. The edits are only visible in LR, but not anywhere else. I'd like to see the edited photo in my folder so that I can use it, for example, for screen saver slide shows. I don't want to go and look for this edited picture in any place other than its original folder, and neither do I want to have two copies of it, namely the original and the edited version, in that folder. All I care for at this point is the edited version since the original can be restored at any time from within LR, or at least I think this how it should be since that's how I did it with ACDSee if I wanted to go back to the original picture.
Is there any way I can achieve what I'm looking for with LR?
Thank you very much for your assistance for a total LR beginner.
Hugo
and neither do I want to have two copies of it, namely the original and the edited version, in that folder
I don't think this is possible, given the normal way Lightroom works. You have the original (the image contained in this file is never modified by Lightroom) and you will have the export.
Note: you could instruct Lightroom to overwrite your original (if it was a JPG or TIF or PSD, but not a RAW), however this is extremely discouraged and your original would be gone. Your assumption "since the original can be restored at any time from within LR" is incorrect, that is not how Lightroom works if you overwrite the original JPG TIF or PSD (which of course is just one of several reasons why this approach is extremely discouraged).
Similar Messages
-
Since updating with 7.1 I no longer get a keypad appearing when I try to search, edit or add contacts in the phone - how can I get the keypad to appear?
Hello there, English Springer Spaniel.
The following Knowledge Base article offers some great steps for troubleshooting an app that isn't performing as expected:
iOS: Understanding multitasking
http://support.apple.com/kb/ht4211
If an app doesn't respond to your input, or doesn't perform as expected, do the following, testing after each step:
Check for app updates.
Force the app to close.
Restart your device.
Update your iOS device.
Learn more about troubleshooting apps.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro. -
How can I make the last photo taken display first (Arrangement by date AND time)?
In PSE 3 Organizer, if I choose Arrangement -> Date (Newest First), it puts the photos I took yesterday first, but within a day, it puts the oldest first. In other words, all of yesterday's photos are first, but the ones taken in the morning appear before the ones taken in the afternoon. I really don't think it worked like this when we first got the software, and I'd like to know how to fix it.
If I choose Arrangement -> Date (Oldest First), it seems to work correctly, sorting by date and time so that the oldest photos really are first.
Does anyone know how to fix this? I'd really appreciate the help.
MichelleWhat you are seeing is the default behaviour, which I think is logical - I like to see my latest batch of work near the top, but have them appear in the order I took them. There is an option in Edit/Preferences which lets you have the oldest first.
-
now that I have the status bar back, why won't it show the status messages IN the status bar?
The Status-4-Evar add-on can do this, it makes the add-ons bar behave in a similar way to the status bar in Firefox 3.6 and earlier.
https://addons.mozilla.org/firefox/addon/status-4-evar/ -
How can I make the comments field appear when the operator is debugging a test?
When a test is being written the comments field is being utilized for information relating to what the test is doing and how to solve certain problems that arise. It is basically a quick place for the technician to look at when they are attempting to debug a board. However it appears when you view the sequence files these are off to the right side of the screen but when running the debug engine and the technician sets a break point then these comments are no longer visible to the user off to the right of the screen. Is there any way to have it include the comment in the data displayed when tracing through a test step by step. The technician can double click on each step but it would be alot mor
e user friendly and timly if these could be displayed just to the right of the execution flow column.Hello John,
I assume you are talking about the sequence editor. Unfortunately, there is currently no way to view the comments associated with a step inside of the execution display window (i.e during run-time). If you are using the operator interface, then you may extract the comment associated with a step and post a custom UI message that contains this information. The operator interface can then be modified to respond to this UIMessage and update its display accordingly.
To post a UIMessage with this data, you must first obtain a PropertyObject reference to the step you are trying to extract the comment from. Then use the "Comment" property of the PropertyObject class to obtain the comment value.
Unfortunately, the Sequence Editor discards all custo
m UIMessages, and you will have no way of viewing the comment using the above method.
Hope this helps. -
How can I make the number table appear??
Hi all, I am having problems with the new version 5.5, I receive call all the time asking me to press a number to accept a call or product but the number box does not appear as an opption in the call. I did not nhave that problem with the oldest version because the box number always appear whe I got a call. Please help to solve thi issue, I do not want to downgrade to ealier version.
moncar wrote:
Hi all, I am having problems with the new version 5.5, I receive call all the time asking me to press a number to accept a call or product but the number box does not appear as an opption in the call. I did not nhave that problem with the oldest version because the box number always appear whe I got a call. Please help to solve thi issue, I do not want to downgrade to ealier version.
Using the Call Window Menu, please do: Call -> Show Dialpad
About Me You can also use a IP Camera as your camera for Skype video Example Instructions -
How can I make the playlist column appear on the left side of iTunes?
Help! I'm left handed nearly always set everything up to the left side of the page. I'm having trouble training my brain to navigate on the new iTunes home page. Moving playlist info. etc. to the right said of the page is uncomfortable for me and distracting. Anyone know how to move this column from the right side of the page to the left?
Well, that was easy! Thanks, Steve. Much appreciated!
-
How can I make the message date appear with the time for unread messages?
Mail systems I am moving from display the date & time with the messages. I need this displayed to determine aging and importance of received mail. When archiving/saving old mail it helps filing mail off and not duplicate archived messages.
Thunderbird displays time and date for all messages except for the present day messages. The time only is displayed for today and the date is appended at midnight.
-
How can I make the rolumn and row headers appear on the printed sheet?
I am working in Numbers'09. I want to print out my chart with the column letters and row numbers showing.
How can I make the rolumn and row headers appear on the printed sheet?g,
Those annotations are called "Labels", and they are only visible during editing when a cell selection is made within the table. If you need to have the labels on your final output, you can create labels in Text Boxes and position them adjacent to the table.
Jerry -
Only some of the photos I have taken on my iPhone appear in the photo stream on my iPad even thou they were taken at the same time. Why is this and how can I import the other photos from my iPhone to my iPad?
If older photos are missing it may be because photo stream photos are only held in iCloud for 30 days. After that they are removed from iCloud but will remain (up to 1000 photos) on your device until deleted. Also, only photos taken after enabling photo stream are added to your photo stream, and only when the camera is closed, your device is connected to wifi and you have at least 20% battery life remaining.
To transfer the missing photos you can either create a shared photo stream containing them and invite yourself to it (see http://help.apple.com/icloud/#mmc0cd7e99), import the photos to your computer and sync them to your iPad, or use an app like PhotoSync to transfer them to your iPad over wifi. -
my camera roll in my 5c has over 2000 pics my photo stream only has 900, how can i make the photo stream have the same amount of pics so i can delete some from my roll to free up space
Photostream is not a substitute for importing your photos to your computer.
How long are My Photo Stream photos stored in iCloud?
The photos you upload to My Photo Stream are stored in iCloud for 30 days to give your devices plenty of time to connect and download them."
ow many photos are stored in My Photo Stream on my devices and computers?
iCloud pushes all your photos to the My Photo Stream album on your devices and computers, and manages them efficiently, so you don’t run out of storage space.
Your iOS devices keep a rolling collection of your last 1000 photos in the My Photo Stream album. -
How can I get the edited pictures from the thumbnails to full size?
I upgraded to iPhoto 11, the thumbnail photos show my previous edits, but when I click on the photo to make it bigger, it reverts back to the unedited, original picture. How can I get the edited pictures from the thumbnails to full size?
Verify you are using iPhoto11 ver 9.5
if not run the >Software update or check your apps folder and make sure the correct iPhoto is launched, not an older ver. -
How can i make the text go vertically in numbers
How can I make the text vertical in numbers? I have merged the cells and cannot find an option for making it go vertical as opposed to horizontal.
I already gave two tools to fit this kind of needs.
tip #1 :
--{code}
--[SCRIPT write_vertically]
Enregistrer le script en tant que Script : write_vertically.scpt
déplacer le fichier ainsi créé dans le dossier
<VolumeDeDémarrage>:Utilisateurs:<votreCompte>:Bibliothèque:Scripts:Applications :Numbers:
Il vous faudra peut-être créer le dossier Numbers et peut-être même le dossier Applications.
Saisir dans une cellule le mot à écrire verticalement puis le sélectionner.
ATTENTION, il ne faut pas sélectionner la cellule mais le mot qui doit apparaitre surligné.
Aller au menu Scripts , choisir Numbers puis choisir “write_vertically”
Le script colle dans la cellule le mot apès avoir inséré un return entre tous les caractères.
Pour mon usage personnel j'associe un raccourci à ce script grace à FastScripts.
--=====
L’aide du Finder explique:
L’Utilitaire AppleScript permet d’activer le Menu des scripts :
Ouvrez l’Utilitaire AppleScript situé dans le dossier Applications/AppleScript.
Cochez la case “Afficher le menu des scripts dans la barre de menus”.
Sous 10.6.x,
aller dans le panneau “Général” du dialogue Préférences de l’Éditeur Applescript
puis cocher la case “Afficher le menu des scripts dans la barre des menus”.
--=====
Save the script as a Script: write_vertically.scpt
Move the newly created file into the folder:
<startup Volume>:Users:<yourAccount>:Library:Scripts:Applications:Numbers:
Maybe you would have to create the folder Numbers and even the folder Applications by yourself.
In a cell, type a word to write vertically then select it.
CAUTION, don’t select the cell but the word which must be highlighted.
Go to the Scripts Menu, choose Numbers, then choose “write_vertically”
The script insert in the cell the word after inserting a return between every characters.
For my own use, I link a shortcut to the script thank to FastScripts.
--=====
The Finder’s Help explains:
To make the Script menu appear:
Open the AppleScript utility located in Applications/AppleScript.
Select the “Show Script Menu in menu bar” checkbox.
Under 10.6.x,
go to the General panel of AppleScript Editor’s Preferences dialog box
and check the “Show Script menu in menu bar” option.
--=====
Yvan KOENIG (VALLAURIS, France)
2011/12/17
2012/01/01 no longer use a local variable, use result
--=====
on run
Clear the clipboard *)
set the clipboard to ""
Copy the selection in the clipboard *)
my raccourci("Numbers", "c", "c")
Loop waiting that the clipboard is really filled *)
repeat
try
if (the clipboard as text) is not "" then exit repeat
on error
end try
end repeat
Extract the clipboard's content *)
the clipboard as text
Insert return between every characters *)
my recolle(every character of result, return)
Fill the clipboard with the edited string *)
set the clipboard to result
Paste in the cell *)
my raccourci("Numbers", "v", "cas")
end run
--=====
on recolle(l, d)
local oTIDs, t
set oTIDs to AppleScript's text item delimiters
set AppleScript's text item delimiters to d
set t to l as text
set AppleScript's text item delimiters to oTIDs
return t
end recolle
--=====
on activateGUIscripting()
(* to be sure than GUI scripting will be active *)
tell application "System Events"
if not (UI elements enabled) then set (UI elements enabled) to true
end tell
end activateGUIscripting
--=====
==== Uses GUIscripting ====
This handler may be used to 'type' text, invisible characters if the third parameter is an empty string.
It may be used to 'type' keyboard raccourcis if the third parameter describe the required modifier keys.
I changed its name « shortcut » to « raccourci » to get rid of a name conflict in Smile.
on raccourci(a, t, d)
local k
tell application a to activate
tell application "System Events" to tell application process a
set frontmost to true
try
t * 1
if d is "" then
key code t
else if d is "c" then
key code t using {command down}
else if d is "a" then
key code t using {option down}
else if d is "k" then
key code t using {control down}
else if d is "s" then
key code t using {shift down}
else if d is in {"ac", "ca"} then
key code t using {command down, option down}
else if d is in {"as", "sa"} then
key code t using {shift down, option down}
else if d is in {"sc", "cs"} then
key code t using {command down, shift down}
else if d is in {"kc", "ck"} then
key code t using {command down, control down}
else if d is in {"ks", "sk"} then
key code t using {shift down, control down}
else if (d contains "c") and (d contains "s") and d contains "k" then
key code t using {command down, shift down, control down}
else if (d contains "c") and (d contains "s") and d contains "a" then
key code t using {command down, shift down, option down}
end if
on error
repeat with k in t
if d is "" then
keystroke (k as text)
else if d is "c" then
keystroke (k as text) using {command down}
else if d is "a" then
keystroke k using {option down}
else if d is "k" then
keystroke (k as text) using {control down}
else if d is "s" then
keystroke k using {shift down}
else if d is in {"ac", "ca"} then
keystroke (k as text) using {command down, option down}
else if d is in {"as", "sa"} then
keystroke (k as text) using {shift down, option down}
else if d is in {"sc", "cs"} then
keystroke (k as text) using {command down, shift down}
else if d is in {"kc", "ck"} then
keystroke (k as text) using {command down, control down}
else if d is in {"ks", "sk"} then
keystroke (k as text) using {shift down, control down}
else if (d contains "c") and (d contains "s") and d contains "k" then
keystroke (k as text) using {command down, shift down, control down}
else if (d contains "c") and (d contains "s") and d contains "a" then
keystroke (k as text) using {command down, shift down, option down}
end if
end repeat
end try
end tell
end raccourci
--=====
--[/SCRIPT]
--{code}
tip #2 :
--{code}
--[SCRIPT rotate_cell_contents]
Enregistrer le script en tant que Script : rotate_cell_contents.scpt
déplacer le fichier ainsi créé dans le dossier
<VolumeDeDémarrage>:Users:<votreCompte>:Library:Scripts:Applications:Numbers:
Il vous faudra peut-être créer le dossier Numbers et peut-être même le dossier Applications.
Sélectionner une cellule dont le texte doit être tourné de 90 degrés.
Aller au menu Scripts , choisir Numbers puis choisir “rotate_cell_contents”
--=====
L’aide du Finder explique:
L’Utilitaire AppleScript permet d’activer le Menu des scripts :
Ouvrez l’Utilitaire AppleScript situé dans le dossier Applications/AppleScript.
Cochez la case “Afficher le menu des scripts dans la barre de menus”.
Sous 10.6.x,
aller dans le panneau “Général” du dialogue Préférences de l’Éditeur Applescript
puis cocher la case “Afficher le menu des scripts dans la barre des menus”.
--=====
Save the script as a Script: rotate_cell_contents.scpt
Move the newly created file into the folder:
<startup Volume>:Users:<yourAccount>:Library:Scripts:Applications:Numbers:
Maybe you would have to create the folder Numbers and even the folder Applications by yourself.
Select a cell whose contents must be rotated for 90 degrees.
Go to the Scripts Menu, choose Numbers, then choose “rotate_cell_contents”
--=====
The Finder’s Help explains:
To make the Script menu appear:
Open the AppleScript utility located in Applications/AppleScript.
Select the “Show Script Menu in menu bar” checkbox.
Under 10.6.x,
go to the General panel of AppleScript Editor’s Preferences dialog box
and check the “Show Script menu in menu bar” option.
--=====
Yvan KOENIG (VALLAURIS, France)
2011/06/23
2011/06/26 -- No longer use an auxiliary text box. Now keep the text attributes.
2012/01/31 -- edited for Lion
--=====
on run
local dName, sName, tName, rowNum1, colNum1, rowNum2, colNum2
local le_texte, la_largeur, la_hauteur, myNewDoc
my activateGUIscripting()
Extract properties of the source/target cell *)
set {dName, sName, tName, rowNum1, colNum1, rowNum2, colNum2} to my get_SelParams()
tell application "Numbers" to tell document dName to tell sheet sName to tell table tName
set selection range to range (name of column colNum1 & name of row rowNum1)
end tell
Cut*)
my raccourci("Numbers", "x", "c")
Trigger Preview *)
tell application "System Events"
if "Preview" is not in (name of every application process) then launch application "Preview"
end tell
delay 0.2 -- required
New document from the clipboard *)
my raccourci("Preview", "n", "c")
Rotate to left *)
my raccourci("Preview", "l", "c")
Copy *)
my raccourci("Preview", "c", "c")
Quit *)
my raccourci("Preview", "q", "c")
(system attribute "sys2") < 7
if result then
Click the [Don't Save] button in the warning sheet *)
tell application "Preview" to activate
tell application "System Events" to tell application process "Preview" to tell window 1
name of buttons
repeat 50 times
delay 0.1
if exists sheet 1 then exit repeat
end repeat
tell sheet 1 to click button 2
end tell
end if
Back to Numbers *)
tell application "Numbers" to tell document dName to tell sheet sName to tell table tName
-- just reset the focus on the table
end tell
Paste in the cell *)
my raccourci("Numbers", "v", "c")
end run
--=====
set { dName, sName, tName, rowNum1, colNum1, rowNum2, colNum2} to my get_SelParams()
tell application "Numbers" to tell document dName to tell sheet sName to tell table tName
on get_SelParams()
local d_name, s_name, t_name, row_num1, col_num1, row_num2, col_num2
tell application "Numbers" to tell document 1
set d_name to its name
set s_name to ""
repeat with i from 1 to the count of sheets
tell sheet i to set maybe to the count of (tables whose selection range is not missing value)
if maybe is not 0 then
set s_name to name of sheet i
exit repeat
end if -- maybe is not 0
end repeat
if s_name is "" then
if my parleAnglais() then
error "No sheet has a selected table embedding at least one selected cell !"
else
error "Aucune feuille ne contient une table ayant au moins une cellule sélectionnée !"
end if -
I purchased an iPhone 3 and had taken some photos on it. I started having issues within 30 days and could replace it. So I created an iCloud account and saved those photos as a back up on iCloud. I did not restore my new phone from back up because I did not realize I needed to restore and not just activitate it. How can I save the new photos, apps, and other stuff but retrieve the old photos?
If all you want is your old photos, you could backup your new phone using iTunes, then restore it from your iCloud backup, import the old photos to your computer, then restore it from the backup your made in iTunes returning your newer data to your phone. If you want your old photos on your phone, sync them there from your computer using iTunes. The process would look like this:
Connect your phone to your computer, when it appears in iTunes on the left sidebar right-click on it and select Transfer Purchases; right-click again and select Backup.
Disconnect from your computer and go to Settings>General>Reset>Erase All Content and Settings to return it to new
Go through the activation setup, choosing to Restore from iCloud backup. Make sure your phone is plugged into a charger and has access to wi-fi as this can take hours to complete.
When complete, without connecting your phone to your computer, open iTunes and go to Preferences. On the Devices tab check "Prevent...from syncing automatically"
Now import the old photos to your computer (see http://support.apple.com/kb/HT4083)
When done, open iTunes, right-click on the name of your phone on the left sidebar and select Restore from Backup, choose the backup you made in step 1.
Go to the Photos tab and select the photos you want to sync to your phone and sync. -
I down loaded sygic on my iPhone 3s but the icon is missing even in the search but when I want to download it again ,it say this application is present, how can I make the icon to show up
- Have you tried a reset. Nothing is lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Try syncing the iPod to your computer. Then delete from iTunes and sync. that should delete it from the iPod. Then redownload it.
Maybe you are looking for
-
i am having macbook air recently my iphotos did not open and was showing report apple and reopen but i came to know that by pressing alt and iphotos i open an new photo library and stored the pics but now how can i get the pics which i had in the ear
-
Cannot access a shared folder Error code: 0x80070035
Hello Experts, I have been working on this issue for like three days without a solution. I am truly desperate. My company just purchased a new Cloud Server that we will use as our development environment for a software project. In order for all the d
-
TV tuner card for G4 digital audio?
Hi everyone or anyone, I just want a simple PCI card that I can screw my cable into and watch TV on my monitor at a max of 1080i. Seems everything I google is a PC (Windows) card. Isn't there an inexpensive quality card out there that is made for a M
-
I'm trying to sync my ipad mini with itunes and i get an error message '' there is no free space on your ipad mini''..... any ideas on how to empty some space on ipad mini manually? currently i run on 6.0.2
-
Hi,When?i connect my MuVo200 to my computer( or?other computer) it starts to connect and deconnect it self continous, making that specific sound when you connect the player. I cant the?player's hard on my computer and?the strange thing is that it sta