How can I make the FN buttons work with an older notebook?

Hi,
I have the Satellite 5200-902 notebook. Unfortunately there is no support for such an "old" notebook like this concerning Windows Vista. Vista runs great on it but the only thing I didn´t make is to make to FN buttons work in Vista.
Can someone please give me an advice ?
Thanks

Hello Danny
Unfortunately I do not believe you will have success with those buttons. The fact is that Toshiba use self designed utility for functionality of all FN buttons. As you know, old notebook models are not vista supported and you will not be able to find and install any utility for that.
Sorry but there is nothing to do.

Similar Messages

  • How can I make the playback buttons of YouTube and other plug-ins bigger since they are so tiny?

    How can I make the playback buttons of YouTube and other plug-ins bigger since they are so tiny in Firefox? I tried some suggestions that dealt with entering "about:config" in a fresh browser, but to no avail. I also downloaded an add-on called "Theme Font & Size Changer", but that didn't work either. So, I am reaching out here as that was a suggestion that another user here offered.

    Ah, yes- that is an ultra high DPI (dots per inch) display. This is a known issue in Flash Player, which Adobe is working on fixing.
    In the mean time, you can get some videos to have normal-sized controls by switching Youtube to the HTML5 video player:
    In Firefox, go to https://www.youtube.com/html5 and click the "Request the HTML5 player" button.

  • I have a new iPhone 5C, have the sounds alerts set up. But I'm not getting sound alerts for new voicemail, only the red circle on the screen.  How can I make the sound alert work?

    I have a new iPhone 5C, have the sounds alerts set up. But I'm not getting sound alerts for new voicemail, only the red circle on the screen.  How can I make the sound alert work?

    I have had this same problem for weeks now with my 4S.  I just got a new 5S after being extremely frustrated and the same thing - no sounds.  After searching posts all over, I couldn't find a solution. I just told my friend of the issue and he asked "Do you have the Do Not Distrub on?"  I didn't even know such a function existed.  Upon looking that was exactly the issue.
    To resolve, go to Settings> Do Not Disturb> Manual.  If it is green, turn it off.  You will now get phone calls and text alerts.
    This functionality is also on your quick access utility menu (slide up menu).  I assume this is how it was enabled on my phone.
    I will post on other sites since I searched for weeks for this solution and didn't see it anywhere.  Good luck!

  • My husband uses adobe cs5. The clone tool isn't working and after resetting the tools adobe bridge now goes to picasa. How can we make the clone tool work and have bridge go to cs5 not picasa?

    My husband uses adobe cs5. The clone tool isn't working and after resetting the tools adobe bridge now goes to picasa. How can we make the clone tool work and have bridge go to cs5 not picasa?

    A lot more information about your hardware and software is needed.
    BOILERPLATE TEXT:
    If you give complete and detailed information about your setup and the issue at hand,
    such as your platform (Mac or Win),
    exact versions of your OS, of Photoshop (not just "CC", but something like CC2014.v.2.2) and of Bridge,
    your settings in Photoshop > Preference > Performance
    the type of file you were working on,
    machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
    what troubleshooting steps you have taken so far,
    what error message(s) you receive,
    if having issues opening raw files also the exact camera make and model that generated them,
    if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
    a screen shot of your settings or of the image could be very helpful too,
    etc.,
    someone may be able to help you (not necessarily this poster, who is not a Windows user).
    Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
    http://forums.adobe.com/thread/419981?tstart=0
    Thanks!

  • How can I make the editor photoshop work

    how can I make the editor photoshop work? it can not work at all.
    please help me . thanks

    You need to tell us at least what program you are referring to and some system info...
    Mylenium

  • HT4623 iPad 3 how can l gets the SIM card works With iPad 3

    As all we know its christmas time l just received the gift for iPad 3 & l notice that it need SIM card for me to use as the phone & data,how can l gets the SIM card works With iPad 3

    Remember am in South Africa & we got few carrier nets am in MTN provide & I c my sim looks so big to fit on my iPad

  • How can we make the save button active in standard toolbar in outout of alv

    Hi experts ,
    I am using factory method to print alv with oops .
    Cancel , Exit and Back button are active by default in Standard tool bar  in output of Report , But Save button is not active , How can i make that save button active .
    Also Pls tell me how i can make editable to the cell in output , 
    My Code is like this :
    cl_salv_table=>factory( IMPORTING r_salv_table = gr_table CHANGING t_table = ispfli ).
      gr_functions = gr_table->get_functions( ).
      gr_functions->set_all( abap_true ).
      gr_display = gr_table->get_display_settings( ).
      gr_display->set_striped_pattern( cl_salv_display_settings=>true ).
      gr_display->set_list_header( 'This is the heading' ).
      gr_columns = gr_table->get_columns( ).
      gr_column ?= gr_columns->get_column( 'CITYTO' ).
      gr_column->set_long_text( 'This is long text' ).
      gr_column->set_medium_text( 'This is med text' ).
      gr_column->set_short_text( 'This is sh' ).
      gr_column ?= gr_columns->get_column( 'CITYFROM' ).
      color-col = '6'.
      color-int = '1'.
      color-inv = '0'.
      gr_column->set_color( color ).
      gr_sorts = gr_table->get_sorts( ).
    *gr_sorts->add_sort( 'CITYTO' ).
      gr_sorts->add_sort( columnname = 'CITYTO' subtotal = abap_true ).
      gr_agg = gr_table->get_aggregations( ).
      gr_agg->add_aggregation( 'DISTANCE' ).
      gr_filter = gr_table->get_filters( ).
      gr_filter->add_filter( columnname = 'CARRID' low = 'DL' ).
      gr_layout = gr_table->get_layout( ).
      gr_layout->set_key( key ).
      key-report = sy-repid.
      gr_layout->set_save_restriction( cl_salv_layout=>restrict_none ).
      gr_table->display( ).
    Rgds,
    Premraj

    Hi,
    1)you need to give the function code to that save in the Function Keys of that screen from the GUI Status.
    2) while filling the field catalog of that field you need to put the        
    wa_fieldcat_edit-edit = c_x.
    i.e use the edit and append to that field catalog internal table.
    for more infomation you can refer to below links:
    problem with alv edit and save
    *Edit* and *Save*  for the selected records in ALV
    solves your problem
    Thanks!!

  • After my update to version 4, the back button now only seems to store the last page I was on rather than the last 10 like it used to before the update. I've scoured the options menu to no avail. How can I get the back button working like it used to?

    The back button used to work many times before it would reach the end of its list of pages I had been to recently and became greyed out, but now it will only work once before this happens. Also, the list of pages that pops up when I right click it now only has two entries no matter how many pages I've visited on that tab, the page I am currently on and the page I most recently left. Previous to the installation of the update to version 4 however, the list that appeared when I right clicked on the back button contained up to 10 items.

    Try the Firefox SafeMode. <br />
    ''A troubleshooting mode, which disables most other Add-ons.''
    # You can open the Firefox 4.0 SafeMode by holding the '''Shft''' key when you use the Firefox desktop or Start menu shortcut.
    # Or use the Help menu item, click on '''Restart with Add-ons Disabled...''' while Firefox is running. <br />
    ''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut (without the Shft key) to open it again.''
    If it is good in the Firefox SafeMode, your problem is probably caused by an extension, and you need to figure out which one. <br />
    http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes

  • How can I make the ${foo} syntax work?

    Hello,
    I have a jsp page and I am using Webwork with the action class exposing beans to the ognl value stack.
    Should I be able to write ${foo} with JSTL? I get the expected value if I write <c:out value="${foo}"/> I do get the expected value.
    The real reason I am asking is because I am trying to use a custom taglib and the parameters are not being evaluated. For example, ${accounts} should represent a collection and when I use <input:selectBox options="${accounts}"/> - the actual string "${accounts}" is passed to the tag. I would really appreciate some help. Thank you very much.
    I am using apache-tomcat 4.1.39 with jakarta-taglibs-standard-1.0.6 for the JSTL implementation. Thank you very much for any help you might be able to offer.
    Regards,
    Joe

    Thank you very much for the response... that makes a lot of sense. I still have 1 question though... this is the strange part;
    The standard JSTL taglibs seem to be able to handle the ${} syntax yet I am also working with a custom taglib that does not seem to have the tags parsed. If you can help me fix this, I would be extremely grateful...
    This works fine:
    <c:forEach items="${accounts}" var="account">
         <c:out value="${account.accountNumber}"/>
    </c:forEach>
    But, when using the custom taglib:
    <input:selectBox options="${accounts}"/>
    the options value in the tag class is actually "${accounts}" and no the list which ${accounts} represents. Do you have any idea as to why this would occur? Here is the tld (snipped to show the parts I am referring to)
         <tag>
              <name>selectBox</name>
              <tag-class>example.SelectBoxTag</tag-class>
              <body-content>JSP</body-content>
              <display-name>selectBox</display-name>
              <attribute>
                   <name>options</name>
                   <required>false</required>
                   <rtexprvalue>true</rtexprvalue>
                   <type>java.lang.Object</type>
                   <description>Any collection of elements to be added to select list</description>
              </attribute>
         </tag>
    thank you very much.
    Joe

  • How can I make the web server work on port 80 and not 443. I can only access my website using https.

    On a Mac Mini server with OS X Lion 10.7.2, I am unalbe to get the web server working on port 80. It switches automatically to port 443 (https).
    This situation complicates the access to FileMaker Web publishing, as I don't want my clients having to use https.
    How can I change that? Does anyone know?
    Thanks for any reply

    in the server: I checked the SSL certificate. Tried several configuration.
    Well, that's a problem for a start.
    Your port 80 connection should NOT use SSL. Port 80 is the standard HTTP port, not HTTPS and most applications that connect to port 80 will not expect to use SSL
    If you want to run a site under both HTTP and HTTPS then you create two sites, one on port 80 without SSL and one on port 443 with SSL

  • How can I make the headphone button pause/resume the right thing on my MacBook?

    On my iPhone, I've developed the habit of using the headphone button to pause/resume/skip what I'm listening to.
    But on my Mac, I try to do the same and instead it ends up launching iTunes, which I do not generally use for listening to music.
    For example, here is a page with a simple audio player
    http://jsfiddle.net/g69x2rt6/embedded/result/
    I start playing the music, then I press the headphone button.  Instead of pausing the playing music, as I expect, iTunes opens.
    The linked page works fine on my iPhone, with the same headphones.
    How do I get the proper behavior back?

    Do a hard restart:   
    hold the power button and the home button down together until the device shows the apple symbol again (hold it past the actual red slider and black screen).   When you see the Apple symbol come up, release both buttons
    then try to reset if that does not work
    Settings>General>Reset>Reset all

  • I am using the Kurzweil 3000 software and before I can use Read the Web, KESIReader Firefox extension must be installed. This is not compatible with Firefox 5, how can I make your extension to work with my software?

    I use the kurzweil 300 software and before I can use Read the Web I must first install the KESIReader.xpi Foxfire extension into Mozilla Foxfire however, the extension is not compatible with Mozilla Foxfire 5 which is the version installed on my computer. What can be done to make this work with Kurzweil 3000 software and the Read the Web tool?
    Mozilla Firefox or Microsoft Internet Explorer 7 or 8 Web Browser.
    Can you help me with the information I have provided I know the rest of the requirements are meet.

    Install Firefox Portable 3.6.22 to your hard drive for that website. <br />
    http://portableapps.com/apps/internet/firefox_portable/localization#legacy36

  • How can I make the "Music" button on the iPhone say something other than "Music" for it's label?

    Hi,
    The question is in the post title. I would like to change the icon which says "MUSIC" on the iPhone (formerly used to say "iPod" in the older O.S.'s) to something else. Let's say I want it to say "Audio" instead. Basically, in yet other words, I want to remane this icon to something else.
    Is this possible to do? If so, how can I go about it?
    Thank you in advance for your help.

    You can't.

  • How can I make the Homepage Button automatically lauch the Homepage in a new tab?

    I have Firefox 22.0 installed, I recently did a reset and now have lost the ability I had to click on the homepage button and automatically launch the Homepage in a new tab? I like this option since when I click on my homepage it doesn't override my current page. I know you can configure new tabs to open the homepage automatically ; and that you can use the Ctr+Homepage Button to open the home page in a new tab. However I would like to know what setting I can add/change to restore this missing feature.
    Thanks

    Open a new tab. In the address bar type; '''''About:Config''''' and press
    enter. If you get a page that warns you about continuing, press the
    '''''I will be careful''''' button. In the search bar, type; '''''Newtab'''''.
    Look for; '''''Browser.newtab.url'''''. Right click and select '''''Modify'''''.
    Type; '''''About:home''''' (or what ever page you want) and press
    enter. That should do it.
    .

  • How can I make my cd-roms work with osx 10.4.9?

    We bought a new mac, but my kids cd-roms -- which we just bought in December -- don't work with it. They say they're Macintosh compatible, but I suspect they just don't work with this new system.
    Is there a driver or some other update I can download to make these games work?
    Thanks for your help -
    S.
    PS: I don't know if it matters, but the games are from Disney (Cinderella's Dollhouse and Magical Dress-Up) and Vivendi Universal (Barbie Swan Lake & Barbie Fashion Show).
    iMac   Mac OS X (10.4.9)  
    iMac   Mac OS X (10.4.9)  

    Hi again,
    The games are copyrighted 2001, 2002, 2003 & 2004; I just bought them in December.
    This is a classic case of: had an old computer, the new CD-roms were too advanced & wouldn't work. So I bought a new computer, and now the games are not advanced enough!
    Although the other posted said I probably had to run them in "classic" - that's not something I should really do, right? Or is it ok to switch my OS back & forth?
    When I first realized my problem & went back to the store, they suggested I look for a patch of some sort, that would upgrade these games. Is that realistic? I went to the mattel site & the vivendi site & didn't find anything that looked useful.
    Finally, I do want to buy games for my kids. What sort of compatibility do I need to look for in the future? Is there really no way for us to use these games now?
    Thanks for your help (and patience, since it takes me so long to get back to these forums
    -Susan
    imac   Mac OS X (10.4.9)  

Maybe you are looking for