How can I make the moon in this shot, more moon like? Pic Included.

So this is the last shot in a trailer I've directed/edited. It was shot against a green screen. We have wind machines blowing her dress. I also shot leaves falling about 15 feet, then rotated the shot to look like the wind is moving them west along with her dress. I have several different layers of fog doing different things. THEN I have the moon. It's a still image, I added a bulge filter to make it appear more rounded and a layer of fog atmosphere on top but it still doesn't look good enough. This is a creative discussion, any and all ideas will be great! Cheers

Absolutely! Here is a screen grab from the adjustments below:
Also, just to do one better, here is the link to the video:
CLICK ME TO WATCH!!
Perhaps there is now too much fog, what do you think??

Similar Messages

I have a new computer. I can not get Firefox to auto-login to any sites. How can I make it so that this new computer functions like every other one I've seen...e.g., it actually remembers what I ask it to?

Cookies are enabled. Sites are checked "remember password" and "automatically log me in." I have checked "yes" to "Do you want firefox to remember the password for this site?" Some sites do auto-fill my username or password, but I still have to go through the process of approving, checking, and clicking, every single time. One example is yahoo mail...but it happens everywhere. It's like every time I access Firefox, it doesn't remember anything.

* Websites remembering you and automatically log you in is stored in a cookie.
* You must allow that cookie (Tools > Options > Privacy > Cookies: Exceptions), especially for secure websites and if you let cookies expire when Firefox closes
* Make sure that you do not use [[Clear Recent History]] to clear the "Cookies" and the "Site Preferences"

I down loaded sygic on my iPhone 3s but the icon is missing even in the search but when I want to download it again ,it say this application is present, how can I make the icon to show up

I down loaded sygic on my iPhone 3s but the icon is missing even in the search but when I want to download it again ,it say this application is present, how can I make the icon to show up

- Have you tried a reset. Nothing is lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Try syncing the iPod to your computer. Then delete from iTunes and sync. that should delete it from the iPod. Then redownload it.

I am frustrated with how my cursor jumps around while typing. How can I make the arrow follow the cursor so this doesn't happen?

Macbook Pro with OSX Yosemite: I am frustrated that when using Word for Mac, the cursor keeps jumping around all over the page. How can I make the pointer follow the cursor so this stops?

Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
* Don't make any changes on the Safe mode start window.
See:
* [[Troubleshooting extensions and themes]]

How can i make the optimiser to skip this full table scan ??

Hi,
I am trying to tune the below query, I have checked up all the possibilities to skip the full table scan on vhd_calldesh_archive, But am unable to find the predicate in the where clause, which is letting the optimiser to choose the full table scan on vhd_calldesk_archive table, which is very large one. how can i make the optimiser to skip this full table scan.
Please check the below sql script and explain plan ,
SELECT a.call_id, a.entry_date,
NVL (INITCAP (b.full_name), caller_name) AS caller_name,
c.description AS org_desc, a.env_id, i.env_desc, a.appl_id,
d.appl_desc, a.module_id, e.module_desc, a.call_type_id,
f.call_type_desc, a.priority, a.upduserid,
INITCAP (g.full_name) AS lastupdated_username, a.call_desc, h.mode_desc,
a.received_time,a.assignment_team, a.status,
ROUND (lcc.pkg_com.fn_datediff ('MI',
a.entry_date,
a.status_date
) AS elapsed_time,
ROUND (lcc.pkg_com.fn_datediff ('MI',
a.entry_date,
a.status_date
) AS resolved_min,
CASE
WHEN a.orgid in (1,100,200) THEN a.orgid
ELSE j.regionorgid
END AS region
,(SELECT coalesce(MAX(upddate),a.upddate) FROM lcc.vhd_callstatus stat WHERE stat.call_id = a.call_id
) as stat_upddate
,(SELECT team_desc from lcc.vhd_teams t where t.team_id = a.assignment_team) as team_desc
,a.eta_date
,coalesce(a.caller_contact, b.telephone) AS caller_contact
,coalesce(a.caller_email, b.email) as email
,a.affected_users
,a.outage_time
,a.QA_DONE
,a.LAST_ACTION_TEAM
,a.LAST_ACTION_USER
,INITCAP (k.full_name) AS last_action_username
,a.last_action_date
,l.team_desc as last_action_teamdesc
,a.refid
,INITCAP (lu.full_name) AS logged_name
,a.pmreview
,a.status as main_status
FROM lcc.vhd_calldesk_archive a
LEFT OUTER JOIN lcc.lcc_userinfo_details b ON b.user_name = a.caller_id
INNER JOIN lcc.com_organization c ON c.code = a.orgid
INNER JOIN lcc.vhd_applications d ON d.appl_id = a.appl_id
INNER JOIN lcc.vhd_modules e ON e.appl_id = a.appl_id AND e.module_id = a.module_id
INNER JOIN lcc.vhd_calltypes f ON f.call_type_id = a.call_type_id
INNER JOIN lcc.com_rptorganization j ON j.orgid = a.orgid AND j.tree = 'HLPDK'
LEFT OUTER JOIN lcc.lcc_userinfo_details g ON g.user_name = a.upduserid
LEFT OUTER JOIN lcc.vhd_callmode h ON h.mode_id = a.mode_id
LEFT OUTER JOIN lcc.vhd_environment i ON i.appl_id = a.appl_id AND i.env_id = a.env_id
LEFT OUTER JOIN lcc.lcc_userinfo_details k ON k.user_name = a.last_action_user
LEFT OUTER JOIN lcc.vhd_teams l ON l.team_id = a.last_action_user
LEFT OUTER JOIN (select CALL_ID,upduserid FROM lcc.VHD_CALLDESK_HISTORY P where upddate
in ( select min(upddate) from lcc.VHD_CALLDESK_HISTORY Q WHERE Q.CALL_ID = P.CALL_ID
group by call_id)) ku
ON ku.call_id = a.call_id
LEFT OUTER JOIN lcc.lcc_userinfo_details lu ON NVL(ku.upduserid,A.upduserid) = lu.user_name;
| Id | Operation | Name | Rows | Bytes | Cost |
| 0 | SELECT STATEMENT | | 2104 | 3667K| 37696 |
| 1 | UNION-ALL | | | | |
| 2 | NESTED LOOPS OUTER | | 2103 | 3665K| 37683 |
| 3 | VIEW | | 2103 | 3616K| 35580 |
| 4 | NESTED LOOPS OUTER | | 2103 | 823K| 35580 |
| 5 | NESTED LOOPS OUTER | | 2103 | 774K| 33477 |
| 6 | NESTED LOOPS OUTER | | 2103 | 685K| 31374 |
| 7 | NESTED LOOPS | | 2103 | 636K| 29271 |
| 8 | NESTED LOOPS | | 2103 | 603K| 27168 |
| 9 | NESTED LOOPS OUTER | | 2103 | 558K| 25065 |
| 10 | NESTED LOOPS OUTER | | 2103 | 515K| 22962 |
| 11 | NESTED LOOPS | | 2103 | 472K| 20859 |
| 12 | NESTED LOOPS | | 2103 | 429K| 18756 |
| 13 | NESTED LOOPS OUTER | | 4826 | 890K| 13930 |
| 14 | NESTED LOOPS OUTER | | 4826 | 848K| 9104 |
| 15 | NESTED LOOPS | | 4826 | 754K| 4278 |
|* 16 | TABLE ACCESS FULL | COM_RPTORGANIZATION | 75 | 1050 | 3 |
| 17 | TABLE ACCESS BY INDEX ROWID | VHD_CALLDESK | 64 | 9344 | 57 |
|* 18 | INDEX RANGE SCAN | VHD_CALLDSK_ORGID | 2476 | | 7 |
| 19 | VIEW PUSHED PREDICATE | | 1 | 20 | 1 |
|* 20 | FILTER | | | | |
| 21 | TABLE ACCESS BY INDEX ROWID | VHD_CALLDESK_HISTORY | 1 | 20 | 2 |
|* 22 | INDEX RANGE SCAN | VHD_CALLDSK_HIST_CALLID_IDX | 1 | | 1 |
|* 23 | FILTER | | | | |
| 24 | SORT GROUP BY NOSORT | | 1 | 12 | 2 |
| 25 | TABLE ACCESS BY INDEX ROWID | VHD_CALLDESK_HISTORY | 1 | 12 | 2 |
|* 26 | INDEX RANGE SCAN | VHD_CALLDSK_HIST_CALLID_IDX | 1 | | 1 |
| 27 | TABLE ACCESS BY INDEX ROWID | VHD_CALLMODE | 1 | 9 | 1 |
|* 28 | INDEX UNIQUE SCAN | VHD_CALLMOD_MODID_PK | 1 | | |
| 29 | TABLE ACCESS BY INDEX ROWID | VHD_APPLICATIONS | 1 | 20 | 1 |
|* 30 | INDEX UNIQUE SCAN | VHD_APPL_APPLID_PK | 1 | | |
| 31 | TABLE ACCESS BY INDEX ROWID | VHD_CALLTYPES | 1 | 21 | 1 |
|* 32 | INDEX UNIQUE SCAN | VHD_CALLTYP_ID_PK | 1 | | |
| 33 | TABLE ACCESS BY INDEX ROWID | VHD_TEAMS | 1 | 21 | 1 |
|* 34 | INDEX UNIQUE SCAN | VHD_TEAMID_PK | 1 | | |
| 35 | TABLE ACCESS BY INDEX ROWID | VHD_ENVIRONMENT | 1 | 21 | 1 |
|* 36 | INDEX UNIQUE SCAN | VHD_ENV_APLENVID_PK | 1 | | |
| 37 | TABLE ACCESS BY INDEX ROWID | VHD_MODULES | 1 | 22 | 1 |
|* 38 | INDEX UNIQUE SCAN | VHD_MOD_APLMOD_ID_PK | 1 | | |
| 39 | TABLE ACCESS BY INDEX ROWID | COM_ORGANIZATION | 1 | 16 | 1 |
|* 40 | INDEX UNIQUE SCAN | COM_ORG_PK | 1 | | |
| 41 | TABLE ACCESS BY INDEX ROWID | LCC_USERINFO_DETAILS | 1 | 24 |
|* 42 | INDEX UNIQUE SCAN | LCCUSERINFOIND | 1 | | |
| 43 | TABLE ACCESS BY INDEX ROWID | LCC_USERINFO_DETAILS | 1 | 43 |
|* 44 | INDEX UNIQUE SCAN | LCCUSERINFOIND | 1 | | |
| 45 | TABLE ACCESS BY INDEX ROWID | LCC_USERINFO_DETAILS | 1 | 24 | 1
|* 46 | INDEX UNIQUE SCAN | LCCUSERINFOIND | 1 | | |
| 47 | TABLE ACCESS BY INDEX ROWID | LCC_USERINFO_DETAILS | 1 | 24 | 1
|* 48 | INDEX UNIQUE SCAN | LCCUSERINFOIND | 1 | | |
| 49 | NESTED LOOPS OUTER | | 1 | 1785 | 13 |
| 50 | VIEW | | 1 | 1761 | 12 |
| 51 | NESTED LOOPS OUTER | | 1 | 1656 | 12 |
| 52 | NESTED LOOPS OUTER | | 1 | 1632 | 11 |
| 53 | NESTED LOOPS OUTER | | 1 | 1608 | 10 |
| 54 | NESTED LOOPS | | 1 | 1565 | 9 |
| 55 | NESTED LOOPS | | 1 | 1549 | 9 |
| 56 | NESTED LOOPS | | 1 | 1535 | 9 |
| 57 | NESTED LOOPS OUTER | | 1 | 1513 | 8 |
| 58 | NESTED LOOPS OUTER | | 1 | 1492 | 7 |
| 59 | NESTED LOOPS | | 1 | 1471 | 6 |
| 60 | NESTED LOOPS | | 1 | 1450 | 5 |
| 61 | NESTED LOOPS OUTER | | 1 | 1430 | 4 |
| 62 | NESTED LOOPS OUTER | | 1 | 1421 | 3 |
| 63 | TABLE ACCESS FULL | VHD_CALLDESK_ARCHIVE | 1 | 1401 | 2 |
| 64 | VIEW PUSHED PREDICATE | | 1 | 20 | 1 |
|* 65 | FILTER | | | | |
| 66 | TABLE ACCESS BY INDEX ROWID | VHD_CALLDESK_HISTORY | 1 | 20 | 2 |
|* 67 | INDEX RANGE SCAN | VHD_CALLDSK_HIST_CALLID_IDX | 1 | | 1 |
|* 68 | FILTER | | | | |
| 69 | SORT GROUP BY NOSORT | | 1 | 12 | 2 |
| 70 | TABLE ACCESS BY INDEX ROWID| VHD_CALLDESK_HISTORY | 1 | 12 | 2 |
|* 71 | INDEX RANGE SCAN | VHD_CALLDSK_HIST_CALLID_IDX | 1 | | 1 |
| 72 | TABLE ACCESS BY INDEX ROWID | VHD_CALLMODE | 1 | 9 | 1 |
|* 73 | INDEX UNIQUE SCAN | VHD_CALLMOD_MODID_PK | 1 | | |
| 74 | TABLE ACCESS BY INDEX ROWID | VHD_APPLICATIONS | 1 | 20 | 1 |
|* 75 | INDEX UNIQUE SCAN | VHD_APPL_APPLID_PK | 1 | | |
| 76 | TABLE ACCESS BY INDEX ROWID | VHD_CALLTYPES | 1 | 21 | 1 |
|* 77 | INDEX UNIQUE SCAN | VHD_CALLTYP_ID_PK | 1 | | |
| 78 | TABLE ACCESS BY INDEX ROWID | VHD_TEAMS | 1 | 21 | 1 |
|* 79 | INDEX UNIQUE SCAN | VHD_TEAMID_PK | 1 | | |
| 80 | TABLE ACCESS BY INDEX ROWID | VHD_ENVIRONMENT | 1 | 21 | 1 |
|* 81 | INDEX UNIQUE SCAN | VHD_ENV_APLENVID_PK | 1 | | |
| 82 | TABLE ACCESS BY INDEX ROWID | VHD_MODULES | 1 | 22 | 1 |
|* 83 | INDEX UNIQUE SCAN | VHD_MOD_APLMOD_ID_PK | 1 | | |
| 84 | TABLE ACCESS BY INDEX ROWID | COM_RPTORGANIZATION | 1 | 14 | |
|* 85 | INDEX UNIQUE SCAN | COM_RPTORG_PK | 1 | | |
| 86 | TABLE ACCESS BY INDEX ROWID | COM_ORGANIZATION | 1 | 16 | |
|* 87 | INDEX UNIQUE SCAN | COM_ORG_PK | 1 | | |
| 88 | TABLE ACCESS BY INDEX ROWID | LCC_USERINFO_DETAILS | 1 | 43 |
|* 89 | INDEX UNIQUE SCAN | LCCUSERINFOIND | 1 | | |
| 90 | TABLE ACCESS BY INDEX ROWID | LCC_USERINFO_DETAILS | 1 | 24 |
|* 91 | INDEX UNIQUE SCAN | LCCUSERINFOIND | 1 | | |
| 92 | TABLE ACCESS BY INDEX ROWID | LCC_USERINFO_DETAILS | 1 | 24 | 1
|* 93 | INDEX UNIQUE SCAN | LCCUSERINFOIND | 1 | | |
| 94 | TABLE ACCESS BY INDEX ROWID | LCC_USERINFO_DETAILS | 1 | 24 | 1
|* 95 | INDEX UNIQUE SCAN | LCCUSERINFOIND | 1 | | |
Predicate Information (identified by operation id):
16 - filter("J"."TREE"='HLPDK')
18 - access("J"."ORGID"="A"."ORGID")
20 - filter( EXISTS (SELECT /*+ */ 0 FROM "LCC"."VHD_CALLDESK_HISTORY" "Q" WHERE "Q"."CALL_ID"=:B1
"Q"."CALL_ID" HAVING MIN("Q"."UPDDATE")=:B2))
22 - access("SYS_ALIAS_2"."CALL_ID"="A"."CALL_ID")
23 - filter(MIN("Q"."UPDDATE")=:B1)
26 - access("Q"."CALL_ID"=:B1)
28 - access("H"."MODE_ID"(+)="A"."MODE_ID")
30 - access("D"."APPL_ID"="A"."APPL_ID")
32 - access("F"."CALL_TYPE_ID"="A"."CALL_TYPE_ID")
34 - access("L"."TEAM_ID"(+)="A"."LAST_ACTION_TEAM")
36 - access("I"."APPL_ID"(+)="A"."APPL_ID" AND "I"."ENV_ID"(+)="A"."ENV_ID")
38 - access("E"."APPL_ID"="A"."APPL_ID" AND "E"."MODULE_ID"="A"."MODULE_ID")
40 - access("C"."CODE"="A"."ORGID")
42 - access("K"."USER_NAME"(+)="A"."LAST_ACTION_USER")
44 - access("B"."USER_NAME"(+)="A"."CALLER_ID")
46 - access("G"."USER_NAME"(+)="A"."UPDUSERID")
48 - access("LU"."USER_NAME"(+)=NVL("SYS_ALIAS_4"."UPDUSERID_162","SYS_ALIAS_4"."UPDUSERID_25"))
65 - filter( EXISTS (SELECT /*+ */ 0 FROM "LCC"."VHD_CALLDESK_HISTORY" "Q" WHERE "Q"."CALL_ID"=:B1
"Q"."CALL_ID" HAVING MIN("Q"."UPDDATE")=:B2))
67 - access("SYS_ALIAS_2"."CALL_ID"="SYS_ALIAS_1"."CALL_ID")
68 - filter(MIN("Q"."UPDDATE")=:B1)
71 - access("Q"."CALL_ID"=:B1)
73 - access("H"."MODE_ID"(+)="SYS_ALIAS_1"."MODE_ID")
75 - access("D"."APPL_ID"="SYS_ALIAS_1"."APPL_ID")
77 - access("F"."CALL_TYPE_ID"="SYS_ALIAS_1"."CALL_TYPE_ID")
79 - access("L"."TEAM_ID"(+)=TO_NUMBER("SYS_ALIAS_1"."LAST_ACTION_USER"))
81 - access("I"."APPL_ID"(+)="SYS_ALIAS_1"."APPL_ID" AND "I"."ENV_ID"(+)="SYS_ALIAS_1"."ENV_ID")
83 - access("E"."APPL_ID"="SYS_ALIAS_1"."APPL_ID" AND "E"."MODULE_ID"="SYS_ALIAS_1"."MODULE_ID")
85 - access("SYS_ALIAS_1"."ORGID"="J"."ORGID" AND "J"."TREE"='HLPDK')
87 - access("C"."CODE"="SYS_ALIAS_1"."ORGID")
89 - access("B"."USER_NAME"(+)="SYS_ALIAS_1"."CALLER_ID")
91 - access("SYS_ALIAS_1"."UPDUSERID"="G"."USER_NAME"(+))
93 - access("K"."USER_NAME"(+)="SYS_ALIAS_1"."LAST_ACTION_USER")
95 - access("LU"."USER_NAME"(+)=NVL("SYS_ALIAS_3"."UPDUSERID_162","SYS_ALIAS_3"."UPDUSERID_25"))
Note: cpu costing is off

I've tried to look thru your sql and changed it a bit. Of course not testet :-)
Your problem isn't the archive table! I tried to remove the 2 selects from the select-clause. Furthermore you have a lot of nested loops in your explain, which is a performance-killer. Try getting rid of them, perhaps use /*+ USE_HASH(?,?) */.
SELECT a.call_id, a.entry_date,
       NVL (INITCAP (b.full_name), caller_name) AS caller_name, c.description AS org_desc, a.env_id, i.env_desc, a.appl_id,
       d.appl_desc, a.module_id, e.module_desc, a.call_type_id, f.call_type_desc, a.priority, a.upduserid,
       INITCAP (g.full_name) AS lastupdated_username, a.call_desc, h.mode_desc, a.received_time, a.assignment_team, a.status,
       ROUND (lcc.pkg_com.fn_datediff ('MI', a.entry_date, a.status_date)) AS elapsed_time,
       ROUND (lcc.pkg_com.fn_datediff ('MI', a.entry_date, a.status_date)) AS resolved_min,
       CASE
          WHEN a.orgid IN (1, 100, 200)
             THEN a.orgid
          ELSE j.regionorgid
       END AS region,
       COALESCE (stat.upddate, a.upddate) AS stat_upddate,
       t.team_desc, a.eta_date,
       COALESCE (a.caller_contact, b.telephone) AS caller_contact,
       COALESCE (a.caller_email, b.email) AS email, a.affected_users,
       a.outage_time, a.qa_done, a.last_action_team, a.last_action_user,
       INITCAP (k.full_name) AS last_action_username, a.last_action_date,
       l.team_desc AS last_action_teamdesc, a.refid,
       INITCAP (lu.full_name) AS logged_name, a.pmreview,
       a.status AS main_status
FROM lcc.vhd_calldesk_archive a, lcc.lcc_userinfo_details b, lcc.com_organization c,
       lcc.vhd_applications d, lcc.vhd_modules e, lcc.vhd_calltypes f, lcc.com_rptorganization j,
       lcc.lcc_userinfo_details g, lcc.vhd_callmode h, lcc.vhd_environment i, lcc.lcc_userinfo_details k,
       lcc.vhd_teams l,
      (SELECT call_id, upduserid
       FROM lcc.vhd_calldesk_history p
       WHERE upddate IN (SELECT   MIN (upddate)
                         FROM lcc.vhd_calldesk_history q
                         WHERE q.call_id = p.call_id
                         GROUP BY call_id)) ku,
       lcc.lcc_userinfo_details lu,
      (SELECT call_id, MAX (upddate)
       FROM lcc.vhd_callstatus
       GROUP BY call_id) stat,
       lcc.vhd_teams t
WHERE a.caller_id        = b.user_name(+)
    AND a.orgid            = c.code
    AND a.appl_id          = d.appl_id
    AND a.appl_id          = e.appl_id
    AND a.module_id        = e.module_id
    AND a.call_type_id     = f.call_type_id
    AND a.orgid            = j.orgid
    AND j.tree             = 'HLPDK'
    AND a.upduserid        = g.user_name(+)
    AND a.mode_id          = h.mode_id(+)
    AND a.appl_id          = i.appl_id(+)
    AND a.env_id           = i.env_id(+)
    AND a.last_action_user = k.user_name(+)
    AND a.last_action_user = l.team_id(+)
    AND a.call_id          = ku.call_id(+)
    AND NVL (ku.upduserid, a.upduserid) = lu.user_name(+)
    AND a.call_id          = stat.call_id
    AND a.assignment_team = t.team_id;

I need to play a song on a Keynote presentation, how do I do this ? I use to drag and drop the mp3 in Keynote but it stops playing when the slide move to the other one... how can I make the song keep playing through the whole presentation ? Thanks.

I need to play a song in a row in a Keynote presentation, how do I do this ? I use to drag and drop the mp3 in Keynote but it stops playing when the slide move to the other one... how can I make the song keep playing through out the presentation ?
Thanks.

Drag the file into the audio window in the Document inspector...

I HAVE TO INSTAL A PRODUCT C LLED "KUDANI AIR " . FAILURE TO DO SO IS BASED ON ADOBE AIR , SO I AM TOLD . HOW CAN I MAKE SURE THAT IS THE CASE ?? HOW CAN I SOLVE THE PROBLEM IF THIS IS THE CASE ??

I HAVE TO INSTALL A PRODUCT CALLED "KUDANI AIR " . FAILURE TO DO SO IS BASED ON ADOBE AIR , SO I AM TOLD . HOW CAN I MAKE SURE THAT IS THE CASE ?? HOW CAN I SOLVE THE PROBLEM IF THIS IS THE CASE ??

if you try to install an app that depends on adobe air, you should be prompted to download and install adobe air (unless it's already installed).
you can download and install directly so you're not prompted by that app, Adobe - Adobe AIR

With the new iOS7 how can I make the picture on my lock screen smaller or is this a glitch with the new iOS7?

With the new iOS7 how can I make the picture on my lock screen smaller or is this a glitch with the new iOS7?
I got the 5s and everytime I try and change the picture on my lock screen the picture is 10x way to big. I try and resize it and make it smaller but it will nto get smaller.
How can I fix this?

See Empty/corrupt iTunes library after upgrade/crash.
tt2

HT1364 I have moved my library to an external hard drive and changed the location of the iTunes media folder in Preferences, but every time I close and re-open iTunes, I have to do it all over again. How can I make the iTunes media folder change permanen

I have moved my library to an external hard drive and changed the location of the iTunes media folder in Preferences, but every time I close and re-open iTunes, I have to do it all over again. How can I make the iTunes media folder change permanent? I have an older machine with Windows XP.

I don't believe mounting the hard drive should be necessary, unless you have several external drives and want your computer to recognise them as folders, rather than drives. I've never had to mount a hard drive, ever. If you don't know how to do it, then it shouldn't be necessary now.
Try this:
Prepare iTunes so that it can see the external drive.
Make a note of which drive-letter the external drive has been allocated. (Look in Windows Exploer)
Look at the file location for a song. Make sure it plays (and therefore that iTunes has found it). Highlight it and select File/Get Info/Summary>Where: and make a note of the drive letter for that song.
Close and shut down the computer.
The next time you turn the computer on again, connect the external drive
Before you start iTunes - check the external drive in Windows Explorer. Is it ready, does it have the same drive-letter that it had last time? Can you go into the drive and see the files on it?
Once you can, start iTunes. (If the drive lettter has changed, you need to work out why before going any further.)
If iTunes fails to find your external drive, you need to check where iTunes is looking for your Library.
Select the same song you checked before (presumably iTunes can no longer find it). Follow the procedure for locating it. You should be able to see where iTunes thinks the file is. It's the drive that counts. Which drive letter is iTunes looking at? Is it the same one that it was previously (which should also be the same one that the drive has now).
What happens, which step do you have problems with?
Message was edited by: the fiend

I have a new iPhone 5C, have the sounds alerts set up. But I'm not getting sound alerts for new voicemail, only the red circle on the screen. How can I make the sound alert work?

I have a new iPhone 5C, have the sounds alerts set up. But I'm not getting sound alerts for new voicemail, only the red circle on the screen. How can I make the sound alert work?

I have had this same problem for weeks now with my 4S. I just got a new 5S after being extremely frustrated and the same thing - no sounds. After searching posts all over, I couldn't find a solution. I just told my friend of the issue and he asked "Do you have the Do Not Distrub on?" I didn't even know such a function existed. Upon looking that was exactly the issue.
To resolve, go to Settings> Do Not Disturb> Manual. If it is green, turn it off. You will now get phone calls and text alerts.
This functionality is also on your quick access utility menu (slide up menu). I assume this is how it was enabled on my phone.
I will post on other sites since I searched for weeks for this solution and didn't see it anywhere. Good luck!

I have a Mac Pro OS 10.7.5 and have a DVD+R disc with files on it, but it ejects the disk after about 10 seconds--what to do? How can I get the data off this disc? I can see it has been already burned, so files are on there?

I have a Mac Pro OS 10.7.5 and have a DVD+R disc with files on it, but it ejects the disk after about 10 seconds--what to do? How can I get the data off this disc? I can see it has been already burned, so files are on there?

Try cleaning the lens and see if that will restore functionality to the DVD drive. Use a DVD lens cleaning disk, if you have a can of compressed air, shoot some into the slot or wrap a fine microfiber cloth (eyeglasses cleaning cloth) around a business card and insert it gently inside the slot.
If no success, make an appointment at an Apple store genius bar and get a free diagnosis from them.
Ciao.

How can I make the spry accordion remember the panel open when I refresh the page or jump to a new page?

How can I make the spry accordion remember the panel open
when I refresh the page or jump to a new page?
I am using the accordion feature on all my pages as a
navigation aid. It has three panels. When you refresh the page the
panel goes back to the default pane... Is there a way of
controlling this so that the browser can remember the pane that is
open (say set a variable, cookie, other?)

Look for "Set the default open panel" on the following page:
http://labs.adobe.com/technologies/spry/articles/accordion_overview/index.html
Keep in mind you would need to change that bit of code on
every page. The only way to do it more dynamically would be to
include a custom javascript or PHP/ASP style script in order to
change the value.

My husband uses adobe cs5. The clone tool isn't working and after resetting the tools adobe bridge now goes to picasa. How can we make the clone tool work and have bridge go to cs5 not picasa?

My husband uses adobe cs5. The clone tool isn't working and after resetting the tools adobe bridge now goes to picasa. How can we make the clone tool work and have bridge go to cs5 not picasa?

A lot more information about your hardware and software is needed.
BOILERPLATE TEXT:
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CC", but something like CC2014.v.2.2) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
a screen shot of your settings or of the image could be very helpful too,
etc.,
someone may be able to help you (not necessarily this poster, who is not a Windows user).
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

How can i make the text bigger?

How can i make the text bigger?

1. press "T" to bring up the text tool.
2. click the text you want to edit
3. highlight the text you want to change size with your cursur
4. If it's not already up, press Command + T to bring up the text tool box and adjust the size under the character group. The value you want to change will have a "TT" next to it.
If this doesn't help. More details will help us help you.

How can i make the text go vertically in numbers

How can I make the text vertical in numbers? I have merged the cells and cannot find an option for making it go vertical as opposed to horizontal.

I already gave two tools to fit this kind of needs.
tip #1 :
--{code}
--[SCRIPT write_vertically]
Enregistrer le script en tant que Script : write_vertically.scpt
déplacer le fichier ainsi créé dans le dossier
<VolumeDeDémarrage>:Utilisateurs:<votreCompte>:Bibliothèque:Scripts:Applications :Numbers:
Il vous faudra peut-être créer le dossier Numbers et peut-être même le dossier Applications.
Saisir dans une cellule le mot à écrire verticalement puis le sélectionner.
ATTENTION, il ne faut pas sélectionner la cellule mais le mot qui doit apparaitre surligné.
Aller au menu Scripts , choisir Numbers puis choisir “write_vertically”
Le script colle dans la cellule le mot apès avoir inséré un return entre tous les caractères.
Pour mon usage personnel j'associe un raccourci à ce script grace à FastScripts.
--=====
L’aide du Finder explique:
L’Utilitaire AppleScript permet d’activer le Menu des scripts :
Ouvrez l’Utilitaire AppleScript situé dans le dossier Applications/AppleScript.
Cochez la case “Afficher le menu des scripts dans la barre de menus”.
Sous 10.6.x,
aller dans le panneau “Général” du dialogue Préférences de l’Éditeur Applescript
puis cocher la case “Afficher le menu des scripts dans la barre des menus”.
--=====
Save the script as a Script: write_vertically.scpt
Move the newly created file into the folder:
<startup Volume>:Users:<yourAccount>:Library:Scripts:Applications:Numbers:
Maybe you would have to create the folder Numbers and even the folder Applications by yourself.
In a cell, type a word to write vertically then select it.
CAUTION, don’t select the cell but the word which must be highlighted.
Go to the Scripts Menu, choose Numbers, then choose “write_vertically”
The script insert in the cell the word after inserting a return between every characters.
For my own use, I link a shortcut to the script thank to FastScripts.
--=====
The Finder’s Help explains:
To make the Script menu appear:
Open the AppleScript utility located in Applications/AppleScript.
Select the “Show Script Menu in menu bar” checkbox.
Under 10.6.x,
go to the General panel of AppleScript Editor’s Preferences dialog box
and check the “Show Script menu in menu bar” option.
--=====
Yvan KOENIG (VALLAURIS, France)
2011/12/17
2012/01/01 no longer use a local variable, use result
--=====
on run
Clear the clipboard *)
set the clipboard to ""
Copy the selection in the clipboard *)
          my raccourci("Numbers", "c", "c")
Loop waiting that the clipboard is really filled *)
          repeat
                    try
                              if (the clipboard as text) is not "" then exit repeat
                    on error
                    end try
          end repeat
Extract the clipboard's content *)
the clipboard as text
Insert return between every characters *)
          my recolle(every character of result, return)
Fill the clipboard with the edited string *)
set the clipboard to result
Paste in the cell *)
          my raccourci("Numbers", "v", "cas")
end run
--=====
on recolle(l, d)
          local oTIDs, t
          set oTIDs to AppleScript's text item delimiters
          set AppleScript's text item delimiters to d
          set t to l as text
          set AppleScript's text item delimiters to oTIDs
          return t
end recolle
--=====
on activateGUIscripting()
(* to be sure than GUI scripting will be active *)
          tell application "System Events"
                    if not (UI elements enabled) then set (UI elements enabled) to true
          end tell
end activateGUIscripting
--=====
==== Uses GUIscripting ====
This handler may be used to 'type' text, invisible characters if the third parameter is an empty string.
It may be used to 'type' keyboard raccourcis if the third parameter describe the required modifier keys.
I changed its name « shortcut » to « raccourci » to get rid of a name conflict in Smile.
on raccourci(a, t, d)
          local k
          tell application a to activate
          tell application "System Events" to tell application process a
                    set frontmost to true
                    try
                              t * 1
                              if d is "" then
key code t
                              else if d is "c" then
key code t using {command down}
                              else if d is "a" then
key code t using {option down}
                              else if d is "k" then
key code t using {control down}
                              else if d is "s" then
key code t using {shift down}
                              else if d is in {"ac", "ca"} then
key code t using {command down, option down}
                              else if d is in {"as", "sa"} then
key code t using {shift down, option down}
                              else if d is in {"sc", "cs"} then
key code t using {command down, shift down}
                              else if d is in {"kc", "ck"} then
key code t using {command down, control down}
                              else if d is in {"ks", "sk"} then
key code t using {shift down, control down}
                              else if (d contains "c") and (d contains "s") and d contains "k" then
key code t using {command down, shift down, control down}
                              else if (d contains "c") and (d contains "s") and d contains "a" then
key code t using {command down, shift down, option down}
                              end if
                    on error
                              repeat with k in t
                                        if d is "" then
keystroke (k as text)
                                        else if d is "c" then
keystroke (k as text) using {command down}
                                        else if d is "a" then
keystroke k using {option down}
                                        else if d is "k" then
keystroke (k as text) using {control down}
                                        else if d is "s" then
keystroke k using {shift down}
                                        else if d is in {"ac", "ca"} then
keystroke (k as text) using {command down, option down}
                                        else if d is in {"as", "sa"} then
keystroke (k as text) using {shift down, option down}
                                        else if d is in {"sc", "cs"} then
keystroke (k as text) using {command down, shift down}
                                        else if d is in {"kc", "ck"} then
keystroke (k as text) using {command down, control down}
                                        else if d is in {"ks", "sk"} then
keystroke (k as text) using {shift down, control down}
                                        else if (d contains "c") and (d contains "s") and d contains "k" then
keystroke (k as text) using {command down, shift down, control down}
                                        else if (d contains "c") and (d contains "s") and d contains "a" then
keystroke (k as text) using {command down, shift down, option down}
                                        end if
                              end repeat
                    end try
          end tell
end raccourci
--=====
--[/SCRIPT]
--{code}
tip #2 :
--{code}
--[SCRIPT rotate_cell_contents]
Enregistrer le script en tant que Script : rotate_cell_contents.scpt
déplacer le fichier ainsi créé dans le dossier
<VolumeDeDémarrage>:Users:<votreCompte>:Library:Scripts:Applications:Numbers:
Il vous faudra peut-être créer le dossier Numbers et peut-être même le dossier Applications.
Sélectionner une cellule dont le texte doit être tourné de 90 degrés.
Aller au menu Scripts , choisir Numbers puis choisir “rotate_cell_contents”
--=====
L’aide du Finder explique:
L’Utilitaire AppleScript permet d’activer le Menu des scripts :
Ouvrez l’Utilitaire AppleScript situé dans le dossier Applications/AppleScript.
Cochez la case “Afficher le menu des scripts dans la barre de menus”.
Sous 10.6.x,
aller dans le panneau “Général” du dialogue Préférences de l’Éditeur Applescript
puis cocher la case “Afficher le menu des scripts dans la barre des menus”.
--=====
Save the script as a Script: rotate_cell_contents.scpt
Move the newly created file into the folder:
<startup Volume>:Users:<yourAccount>:Library:Scripts:Applications:Numbers:
Maybe you would have to create the folder Numbers and even the folder Applications by yourself.
Select a cell whose contents must be rotated for 90 degrees.
Go to the Scripts Menu, choose Numbers, then choose “rotate_cell_contents”
--=====
The Finder’s Help explains:
To make the Script menu appear:
Open the AppleScript utility located in Applications/AppleScript.
Select the “Show Script Menu in menu bar” checkbox.
Under 10.6.x,
go to the General panel of AppleScript Editor’s Preferences dialog box
and check the “Show Script menu in menu bar” option.
--=====
Yvan KOENIG (VALLAURIS, France)
2011/06/23
2011/06/26 -- No longer use an auxiliary text box. Now keep the text attributes.
2012/01/31 -- edited for Lion
--=====
on run
          local dName, sName, tName, rowNum1, colNum1, rowNum2, colNum2
          local le_texte, la_largeur, la_hauteur, myNewDoc
          my activateGUIscripting()
Extract properties of the source/target cell *)
          set {dName, sName, tName, rowNum1, colNum1, rowNum2, colNum2} to my get_SelParams()
          tell application "Numbers" to tell document dName to tell sheet sName to tell table tName
                    set selection range to range (name of column colNum1 & name of row rowNum1)
          end tell
Cut*)
          my raccourci("Numbers", "x", "c")
Trigger Preview *)
          tell application "System Events"
                    if "Preview" is not in (name of every application process) then launch application "Preview"
          end tell
delay 0.2 -- required
New document from the clipboard *)
          my raccourci("Preview", "n", "c")
Rotate to left *)
          my raccourci("Preview", "l", "c")
Copy *)
          my raccourci("Preview", "c", "c")
Quit *)
          my raccourci("Preview", "q", "c")
          (system attribute "sys2") < 7
          if result then
Click the [Don't Save] button in the warning sheet *)
                    tell application "Preview" to activate
                    tell application "System Events" to tell application process "Preview" to tell window 1
                              name of buttons
                              repeat 50 times
                                        delay 0.1
                                        if exists sheet 1 then exit repeat
                              end repeat
                              tell sheet 1 to click button 2
                    end tell
          end if
Back to Numbers *)
          tell application "Numbers" to tell document dName to tell sheet sName to tell table tName
-- just reset the focus on the table
          end tell
Paste in the cell *)
          my raccourci("Numbers", "v", "c")
end run
--=====
set { dName, sName, tName, rowNum1, colNum1, rowNum2, colNum2} to my get_SelParams()
tell application "Numbers" to tell document dName to tell sheet sName to tell table tName
on get_SelParams()
          local d_name, s_name, t_name, row_num1, col_num1, row_num2, col_num2
          tell application "Numbers" to tell document 1
                    set d_name to its name
                    set s_name to ""
                    repeat with i from 1 to the count of sheets
                              tell sheet i to set maybe to the count of (tables whose selection range is not missing value)
                              if maybe is not 0 then
                                        set s_name to name of sheet i
                                        exit repeat
                              end if -- maybe is not 0
                    end repeat
                    if s_name is "" then
                              if my parleAnglais() then
                                        error "No sheet has a selected table embedding at least one selected cell !"
                              else
                                        error "Aucune feuille ne contient une table ayant au moins une cellule sélectionnée !"
                              end if

How can I make the moon in this shot, more moon like? Pic Included.

Similar Messages

Maybe you are looking for