How can I make the "Music" button on the iPhone say something other than "Music" for it's label?
Hi,
The question is in the post title. I would like to change the icon which says "MUSIC" on the iPhone (formerly used to say "iPod" in the older O.S.'s) to something else. Let's say I want it to say "Audio" instead. Basically, in yet other words, I want to remane this icon to something else.
Is this possible to do? If so, how can I go about it?
Thank you in advance for your help.
You can't.
Similar Messages
-
How can I make the iPhone beep every hour ?
How can I make the iPhone beep every hour ?
Just a beep not an alarm (alarms require an acknowledgement)I wanted this function as well and I just downloaded "BBClendar Free" and it works perfectly for this, better than an inexpensive digital watch!
Just go to the Advanced section, enable the hourly beep and even set which hours (mine is 8 AM - 10 PM) and what minute of each hour it beeps on. Just be sure to leave the program open when you go on standby or it won't beep.
As the App's description says, "Hourly Beep helps you to take a moment to rest in a busy day for every hour."
Enjoy! -
How can I make the iPhone podcast app automatically stop playing after one episode?
How can I make the iPhone podcast app automatically stop playing after one episode?
When playing a song, are the controls at the top of the screen there? (Genius, Shuffle, Loop?)
If not, tap the center of the page once to expose them
now keep tapping the circle on the left part of the exposed controls untill a one (1) appears... -
How can I make the xfinity email app my default email for my 4s?
I have set up hotmail and yahoo email on my iPhone. They work fine and show all folders that are on my desktop on the Iphone. When I set up my comcast email it only will show the inbox and deleated folders. Comcast is my main email client and I need to see all of the same folders that are on my desktop on the Iphone. When I install the xfinity app on the Iphone all of the folders are available on the Iphone, but I can't make the xfinity email my default or primary email on the Iphone. Any Help??
wesdalton wrote:
but I can't make the xfinity email my default or primary email on the Iphone.
That's correct, & why there is a separate app. -
How can I make the second internal drive bootable drive bootable for trouble shooting?
I suspect that a newly installed SSD boot drive may be causing instability in my new 2012 Mac Mini Server. The logic board and RAM have been replaced and boot drive wiped and partitioned and 10.10.2 reinstalled. I'd like to make the second drive bootable in order to take the SSD boot drive out of the equation.
Could some please describe the correct method for making the second internal drive bootable.
Thanks.A quick addendum: your Mac will have a default boot drive set, and if not then it will choose the first one it identifies on the disk (usually the first partition on the first disk, followed by subsequent partitions on this disk, and then moving to the second identified disk, etc.). As a result, if you have to hold Option to select your second boot drive, the next time you restart, your Mac will boot back to the first drive. To make the second boot drive the default one, you will need to select it in the Startup Disk system preferences. This will update the hardware to use this as the default boot drive.
-
Can I make the iphone say the callers name in my bluetooth?
My old Nokia would tell me who was calling in my bluetooth headset. I can't find anything in my iphone that will do that, am I missing something?
Try this?
https://discussions.apple.com/thread/3080691?start=0&tstart=0 -
How can I make the background one solid color? It is too difficult and noticeable when I use the retouch button and try to erase all the creases in my backdrop. So, how can I have just a solid white background?
When talking about a specific image posting the image may be useful.
One can use a Layer Mask and add a white Layer underneath. -
How can we make the save button active in standard toolbar in outout of alv
Hi experts ,
I am using factory method to print alv with oops .
Cancel , Exit and Back button are active by default in Standard tool bar in output of Report , But Save button is not active , How can i make that save button active .
Also Pls tell me how i can make editable to the cell in output ,
My Code is like this :
cl_salv_table=>factory( IMPORTING r_salv_table = gr_table CHANGING t_table = ispfli ).
gr_functions = gr_table->get_functions( ).
gr_functions->set_all( abap_true ).
gr_display = gr_table->get_display_settings( ).
gr_display->set_striped_pattern( cl_salv_display_settings=>true ).
gr_display->set_list_header( 'This is the heading' ).
gr_columns = gr_table->get_columns( ).
gr_column ?= gr_columns->get_column( 'CITYTO' ).
gr_column->set_long_text( 'This is long text' ).
gr_column->set_medium_text( 'This is med text' ).
gr_column->set_short_text( 'This is sh' ).
gr_column ?= gr_columns->get_column( 'CITYFROM' ).
color-col = '6'.
color-int = '1'.
color-inv = '0'.
gr_column->set_color( color ).
gr_sorts = gr_table->get_sorts( ).
*gr_sorts->add_sort( 'CITYTO' ).
gr_sorts->add_sort( columnname = 'CITYTO' subtotal = abap_true ).
gr_agg = gr_table->get_aggregations( ).
gr_agg->add_aggregation( 'DISTANCE' ).
gr_filter = gr_table->get_filters( ).
gr_filter->add_filter( columnname = 'CARRID' low = 'DL' ).
gr_layout = gr_table->get_layout( ).
gr_layout->set_key( key ).
key-report = sy-repid.
gr_layout->set_save_restriction( cl_salv_layout=>restrict_none ).
gr_table->display( ).
Rgds,
PremrajHi,
1)you need to give the function code to that save in the Function Keys of that screen from the GUI Status.
2) while filling the field catalog of that field you need to put the
wa_fieldcat_edit-edit = c_x.
i.e use the edit and append to that field catalog internal table.
for more infomation you can refer to below links:
problem with alv edit and save
*Edit* and *Save* for the selected records in ALV
solves your problem
Thanks!! -
How can I make the playback buttons of YouTube and other plug-ins bigger since they are so tiny?
How can I make the playback buttons of YouTube and other plug-ins bigger since they are so tiny in Firefox? I tried some suggestions that dealt with entering "about:config" in a fresh browser, but to no avail. I also downloaded an add-on called "Theme Font & Size Changer", but that didn't work either. So, I am reaching out here as that was a suggestion that another user here offered.
Ah, yes- that is an ultra high DPI (dots per inch) display. This is a known issue in Flash Player, which Adobe is working on fixing.
In the mean time, you can get some videos to have normal-sized controls by switching Youtube to the HTML5 video player:
In Firefox, go to https://www.youtube.com/html5 and click the "Request the HTML5 player" button. -
I down loaded sygic on my iPhone 3s but the icon is missing even in the search but when I want to download it again ,it say this application is present, how can I make the icon to show up
- Have you tried a reset. Nothing is lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Try syncing the iPod to your computer. Then delete from iTunes and sync. that should delete it from the iPod. Then redownload it. -
How can I make the combo box turn to the value of black.
When the show button is pressed (and not before), a filled black square should be
displayed in the display area. The combo box (or drop down list) that enables the user to choose the colour of
the displayed shape and the altering should take effect immediately.When the show button is pressed,
the image should immediately revert to the black square, the combo box should show the value that
correspond to the black.
Now ,the problem is: after I pressed show button, the image is reverted to the black square,but I don't know
how can I make the combo box turn to the value of black.
Any help or hint?Thanks a lot!
coding 1.
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
import javax.swing.event.*;
public class test extends JFrame {
private JPanel buttonPanel;
private DrawPanel myPanel;
private JButton showButton;
private JComboBox colorComboBox;
private boolean isShow;
private int shape;
private boolean isFill=true;
private String colorNames[] = {"black", "blue", "cyan", "darkGray", "gray",
"green", "lightgray", "magenta", "orange",
"pink", "red", "white", "yellow"}; // color names list in ComboBox
private Color colors[] = {Color.black, Color.blue, Color.cyan, Color.darkGray,
Color.gray, Color.green, Color.lightGray, Color.magenta,
Color.orange, Color.pink, Color.red, Color.white, Color.yellow};
public test() {
super("Draw Shapes");
// creat custom drawing panel
myPanel = new DrawPanel(); // instantiate a DrawPanel object
myPanel.setBackground(Color.white);
// set up showButton
// register an event handler for showButton's ActionEvent
showButton = new JButton ("show");
showButton.addActionListener(
// anonymous inner class to handle showButton events
new ActionListener() {
// draw a black filled square shape after clicking showButton
public void actionPerformed (ActionEvent event) {
// call DrawPanel method setShowStatus and pass an parameter
// to decide if show the shape
myPanel.setShowStatus(true);
isShow = myPanel.getShowStatus();
shape = DrawPanel.SQUARE;
// call DrawPanel method setShape to indicate shape to draw
myPanel.setShape(shape);
// call DrawPanel method setFill to indicate to draw a filled shape
myPanel.setFill(true);
// call DrawPanel method draw
myPanel.draw();
myPanel.setFill(true);
myPanel.setForeground(Color.black);
}// end anonymous inner class
);// end call to addActionListener
// set up colorComboBox
// register event handlers for colorComboBox's ItemEvent
colorComboBox = new JComboBox(colorNames);
colorComboBox.setMaximumRowCount(5);
colorComboBox.addItemListener(
// anonymous inner class to handle colorComboBox events
new ItemListener() {
// select shape's color
public void itemStateChanged(ItemEvent event) {
if(event.getStateChange() == ItemEvent.SELECTED)
// call DrawPanel method setForeground
// and pass an element value of colors array
myPanel.setForeground(colors[colorComboBox.getSelectedIndex()]);
myPanel.draw();
}// end anonymous inner class
); // end call to addItemListener
// set up panel containing buttons
buttonPanel = new JPanel();
buttonPanel.setLayout(new GridLayout(4, 1, 0, 50));
buttonPanel.add(showButton);
buttonPanel.add(colorComboBox);
JPanel radioButtonPanel = new JPanel();
radioButtonPanel.setLayout(new GridLayout(2, 1, 0, 20));
Container container = getContentPane();
container.setLayout(new BorderLayout(10,10));
container.add(myPanel, BorderLayout.CENTER);
container.add(buttonPanel, BorderLayout.EAST);
setSize(500, 400);
setVisible(true);
public static void main(String args[]) {
test application = new test();
application.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
coding 2
import java.awt.*;
import javax.swing.*;
public class DrawPanel extends JPanel {
public final static int CIRCLE = 1, SQUARE = 2;
private int shape;
private boolean fill;
private boolean showStatus;
private int shapeSize = 100;
private Color foreground;
// draw a specified shape
public void paintComponent (Graphics g){
super.paintComponent(g);
// find center
int x=(getSize().width-shapeSize)/2;
int y=(getSize().height-shapeSize)/2;
if (shape == CIRCLE) {
if (fill == true){
g.setColor(foreground);
g.fillOval(x, y, shapeSize, shapeSize);
else{
g.setColor(foreground);
g.drawOval(x, y, shapeSize, shapeSize);
else if (shape == SQUARE){
if (fill == true){
g.setColor(foreground);
g.fillRect(x, y, shapeSize, shapeSize);
else{
g.setColor(foreground);
g.drawRect(x, y, shapeSize, shapeSize);
// set showStatus value
public void setShowStatus (boolean s) {
showStatus = s;
// return showstatus value
public boolean getShowStatus () {
return showStatus;
// set fill value
public void setFill(boolean isFill) {
fill = isFill;
// set shape value
public void setShape(int shapeToDraw) {
shape = shapeToDraw;
// set shapeSize value
public void setShapeSize(int newShapeSize) {
shapeSize = newShapeSize;
// set foreground value
public void setForeground(Color newColor) {
foreground = newColor;
// repaint DrawPanel
public void draw (){
if(showStatus == true)
repaint();Hello,
does setSelectedIndex(int anIndex)
do what you need?
See Java Doc for JComboBox. -
How can i make the text go vertically in numbers
How can I make the text vertical in numbers? I have merged the cells and cannot find an option for making it go vertical as opposed to horizontal.
I already gave two tools to fit this kind of needs.
tip #1 :
--{code}
--[SCRIPT write_vertically]
Enregistrer le script en tant que Script : write_vertically.scpt
déplacer le fichier ainsi créé dans le dossier
<VolumeDeDémarrage>:Utilisateurs:<votreCompte>:Bibliothèque:Scripts:Applications :Numbers:
Il vous faudra peut-être créer le dossier Numbers et peut-être même le dossier Applications.
Saisir dans une cellule le mot à écrire verticalement puis le sélectionner.
ATTENTION, il ne faut pas sélectionner la cellule mais le mot qui doit apparaitre surligné.
Aller au menu Scripts , choisir Numbers puis choisir “write_vertically”
Le script colle dans la cellule le mot apès avoir inséré un return entre tous les caractères.
Pour mon usage personnel j'associe un raccourci à ce script grace à FastScripts.
--=====
L’aide du Finder explique:
L’Utilitaire AppleScript permet d’activer le Menu des scripts :
Ouvrez l’Utilitaire AppleScript situé dans le dossier Applications/AppleScript.
Cochez la case “Afficher le menu des scripts dans la barre de menus”.
Sous 10.6.x,
aller dans le panneau “Général” du dialogue Préférences de l’Éditeur Applescript
puis cocher la case “Afficher le menu des scripts dans la barre des menus”.
--=====
Save the script as a Script: write_vertically.scpt
Move the newly created file into the folder:
<startup Volume>:Users:<yourAccount>:Library:Scripts:Applications:Numbers:
Maybe you would have to create the folder Numbers and even the folder Applications by yourself.
In a cell, type a word to write vertically then select it.
CAUTION, don’t select the cell but the word which must be highlighted.
Go to the Scripts Menu, choose Numbers, then choose “write_vertically”
The script insert in the cell the word after inserting a return between every characters.
For my own use, I link a shortcut to the script thank to FastScripts.
--=====
The Finder’s Help explains:
To make the Script menu appear:
Open the AppleScript utility located in Applications/AppleScript.
Select the “Show Script Menu in menu bar” checkbox.
Under 10.6.x,
go to the General panel of AppleScript Editor’s Preferences dialog box
and check the “Show Script menu in menu bar” option.
--=====
Yvan KOENIG (VALLAURIS, France)
2011/12/17
2012/01/01 no longer use a local variable, use result
--=====
on run
Clear the clipboard *)
set the clipboard to ""
Copy the selection in the clipboard *)
my raccourci("Numbers", "c", "c")
Loop waiting that the clipboard is really filled *)
repeat
try
if (the clipboard as text) is not "" then exit repeat
on error
end try
end repeat
Extract the clipboard's content *)
the clipboard as text
Insert return between every characters *)
my recolle(every character of result, return)
Fill the clipboard with the edited string *)
set the clipboard to result
Paste in the cell *)
my raccourci("Numbers", "v", "cas")
end run
--=====
on recolle(l, d)
local oTIDs, t
set oTIDs to AppleScript's text item delimiters
set AppleScript's text item delimiters to d
set t to l as text
set AppleScript's text item delimiters to oTIDs
return t
end recolle
--=====
on activateGUIscripting()
(* to be sure than GUI scripting will be active *)
tell application "System Events"
if not (UI elements enabled) then set (UI elements enabled) to true
end tell
end activateGUIscripting
--=====
==== Uses GUIscripting ====
This handler may be used to 'type' text, invisible characters if the third parameter is an empty string.
It may be used to 'type' keyboard raccourcis if the third parameter describe the required modifier keys.
I changed its name « shortcut » to « raccourci » to get rid of a name conflict in Smile.
on raccourci(a, t, d)
local k
tell application a to activate
tell application "System Events" to tell application process a
set frontmost to true
try
t * 1
if d is "" then
key code t
else if d is "c" then
key code t using {command down}
else if d is "a" then
key code t using {option down}
else if d is "k" then
key code t using {control down}
else if d is "s" then
key code t using {shift down}
else if d is in {"ac", "ca"} then
key code t using {command down, option down}
else if d is in {"as", "sa"} then
key code t using {shift down, option down}
else if d is in {"sc", "cs"} then
key code t using {command down, shift down}
else if d is in {"kc", "ck"} then
key code t using {command down, control down}
else if d is in {"ks", "sk"} then
key code t using {shift down, control down}
else if (d contains "c") and (d contains "s") and d contains "k" then
key code t using {command down, shift down, control down}
else if (d contains "c") and (d contains "s") and d contains "a" then
key code t using {command down, shift down, option down}
end if
on error
repeat with k in t
if d is "" then
keystroke (k as text)
else if d is "c" then
keystroke (k as text) using {command down}
else if d is "a" then
keystroke k using {option down}
else if d is "k" then
keystroke (k as text) using {control down}
else if d is "s" then
keystroke k using {shift down}
else if d is in {"ac", "ca"} then
keystroke (k as text) using {command down, option down}
else if d is in {"as", "sa"} then
keystroke (k as text) using {shift down, option down}
else if d is in {"sc", "cs"} then
keystroke (k as text) using {command down, shift down}
else if d is in {"kc", "ck"} then
keystroke (k as text) using {command down, control down}
else if d is in {"ks", "sk"} then
keystroke (k as text) using {shift down, control down}
else if (d contains "c") and (d contains "s") and d contains "k" then
keystroke (k as text) using {command down, shift down, control down}
else if (d contains "c") and (d contains "s") and d contains "a" then
keystroke (k as text) using {command down, shift down, option down}
end if
end repeat
end try
end tell
end raccourci
--=====
--[/SCRIPT]
--{code}
tip #2 :
--{code}
--[SCRIPT rotate_cell_contents]
Enregistrer le script en tant que Script : rotate_cell_contents.scpt
déplacer le fichier ainsi créé dans le dossier
<VolumeDeDémarrage>:Users:<votreCompte>:Library:Scripts:Applications:Numbers:
Il vous faudra peut-être créer le dossier Numbers et peut-être même le dossier Applications.
Sélectionner une cellule dont le texte doit être tourné de 90 degrés.
Aller au menu Scripts , choisir Numbers puis choisir “rotate_cell_contents”
--=====
L’aide du Finder explique:
L’Utilitaire AppleScript permet d’activer le Menu des scripts :
Ouvrez l’Utilitaire AppleScript situé dans le dossier Applications/AppleScript.
Cochez la case “Afficher le menu des scripts dans la barre de menus”.
Sous 10.6.x,
aller dans le panneau “Général” du dialogue Préférences de l’Éditeur Applescript
puis cocher la case “Afficher le menu des scripts dans la barre des menus”.
--=====
Save the script as a Script: rotate_cell_contents.scpt
Move the newly created file into the folder:
<startup Volume>:Users:<yourAccount>:Library:Scripts:Applications:Numbers:
Maybe you would have to create the folder Numbers and even the folder Applications by yourself.
Select a cell whose contents must be rotated for 90 degrees.
Go to the Scripts Menu, choose Numbers, then choose “rotate_cell_contents”
--=====
The Finder’s Help explains:
To make the Script menu appear:
Open the AppleScript utility located in Applications/AppleScript.
Select the “Show Script Menu in menu bar” checkbox.
Under 10.6.x,
go to the General panel of AppleScript Editor’s Preferences dialog box
and check the “Show Script menu in menu bar” option.
--=====
Yvan KOENIG (VALLAURIS, France)
2011/06/23
2011/06/26 -- No longer use an auxiliary text box. Now keep the text attributes.
2012/01/31 -- edited for Lion
--=====
on run
local dName, sName, tName, rowNum1, colNum1, rowNum2, colNum2
local le_texte, la_largeur, la_hauteur, myNewDoc
my activateGUIscripting()
Extract properties of the source/target cell *)
set {dName, sName, tName, rowNum1, colNum1, rowNum2, colNum2} to my get_SelParams()
tell application "Numbers" to tell document dName to tell sheet sName to tell table tName
set selection range to range (name of column colNum1 & name of row rowNum1)
end tell
Cut*)
my raccourci("Numbers", "x", "c")
Trigger Preview *)
tell application "System Events"
if "Preview" is not in (name of every application process) then launch application "Preview"
end tell
delay 0.2 -- required
New document from the clipboard *)
my raccourci("Preview", "n", "c")
Rotate to left *)
my raccourci("Preview", "l", "c")
Copy *)
my raccourci("Preview", "c", "c")
Quit *)
my raccourci("Preview", "q", "c")
(system attribute "sys2") < 7
if result then
Click the [Don't Save] button in the warning sheet *)
tell application "Preview" to activate
tell application "System Events" to tell application process "Preview" to tell window 1
name of buttons
repeat 50 times
delay 0.1
if exists sheet 1 then exit repeat
end repeat
tell sheet 1 to click button 2
end tell
end if
Back to Numbers *)
tell application "Numbers" to tell document dName to tell sheet sName to tell table tName
-- just reset the focus on the table
end tell
Paste in the cell *)
my raccourci("Numbers", "v", "c")
end run
--=====
set { dName, sName, tName, rowNum1, colNum1, rowNum2, colNum2} to my get_SelParams()
tell application "Numbers" to tell document dName to tell sheet sName to tell table tName
on get_SelParams()
local d_name, s_name, t_name, row_num1, col_num1, row_num2, col_num2
tell application "Numbers" to tell document 1
set d_name to its name
set s_name to ""
repeat with i from 1 to the count of sheets
tell sheet i to set maybe to the count of (tables whose selection range is not missing value)
if maybe is not 0 then
set s_name to name of sheet i
exit repeat
end if -- maybe is not 0
end repeat
if s_name is "" then
if my parleAnglais() then
error "No sheet has a selected table embedding at least one selected cell !"
else
error "Aucune feuille ne contient une table ayant au moins une cellule sélectionnée !"
end if -
How can I make the popup with empty fileds and create new record?
I would like to use a popup to create new record.
I created a af:popup by drag and drop a VO from data control to jsff. then, I created a button and place a af:showPopupBehavior. I was able to popup window by click the button.
however, the window filled with the information from the 1st record. and when I select a record in table and click popup, the popup is filled with that record.
How can I make the popup with empty fileds and create new record by saving the popup?
ThanksYou can have edit and new buttons, in the PopupFetchEvent identify button source (using popupFetchEvent.getLaunchSourceClientId()) if new button clicked clear the binding using below code.
If you want to see empty fields, in the popup PopupFetchEvent clear the input component bindings.
resetBindingValue("#{bindings.<componentid>.inputValue}", null);
public static void resetBindingValue(String expression, Object newValue) {
FacesContext ctx = FacesContext.getCurrentInstance();
Application app = ctx.getApplication();
ExpressionFactory elFactory = app.getExpressionFactory();
ELContext elContext = ctx.getELContext();
ValueExpression valueExp = elFactory.createValueExpression(elContext,expression,Object.class);
Class bindClass = valueExp.getType(elContext);
valueExp.setValue(elContext,newValue);
} -
On my Mac desktop I must have changed a setting so that now when I move the mouse the open windows fly off to the sides and I can't see them. They come back when I move the mouse, but it is so annoying. How can I make the windows not disappear like that?
Click on the Hot Corners.. button and look at the four definitions. In the picture below, if you moved the cursor to the right top of the screen, it would slide all the applications off the screen as you describe and show the desktop. Set it to "-" to deactivate.
-
Macbook Pro with OSX Yosemite: I am frustrated that when using Word for Mac, the cursor keeps jumping around all over the page. How can I make the pointer follow the cursor so this stops?
Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
* Don't make any changes on the Safe mode start window.
See:
* [[Troubleshooting extensions and themes]]
Maybe you are looking for
-
Can I use a flash drive to back up my iTunes?
Did a search on backing up my iTunes, and only get the option of backing up to a disc (Which is what I've done over the past 3 years. I now have 6 discs accumulated). Can I use a flash drive to back up my apps, music, and videos? I only have a total
-
I have a firewire 800 external hdd as my time machine drive, and now want to add another fw800 external drive to my system. I will have to daisy chain them, and would like to ask will time machine still back-up the second daisy chained drive. So my s
-
Changing iTunes library that iPhoto looks for
Hello all... I have the same problem that others have posted about but with a bit of a twist. When I go to add iTunes music to my slideshow, it says to "open iTunes 6 or later to populate this list." I have tried the suggested Apple solutions but I t
-
Is there a way to go to the next or previouse message when you OPEN a message? Entourage does this. with Mail it seems you cant do it from a open message? thx..:)
-
Dark parts of images not printing well
I am trying to troubleshoot printing a twilinght image with subtle detail in dark areas of the image. I can see the detail fine looking directly at the iMac display, but it consistently prints darker loosing the subtle shadings. I have tried monitor