How can I make the project into 16:9 when using 2 4:3 aspect ratio videos in project

I want to make a project that is 16:9 but am adding a video of a talking head (speaker) fimed in 4:3 and I want to place that in upper left corner of project and then add a video of the powerpoint they were speaking to also filmed in 4:3

There are a number of challenges to doing this, including the fact that doing so will require lots of rendering and the even bigger fact that, if you're planning to show this on a TV, up to 10% of the edge gets cut off, which means that any text you've got outside of the "safe zone" might be off the screen.
But, with those caveats, place the upper left corner video on Video 1, select it and open Applied Effects. Open Motion and set the Position and Scale so that your video sits in the upper right corner.
Add your images to Video 2 and do the same thing, setting Position and Scale so that it is in the lower left of your screen. Then add you main video to Video 3 and set its Position and Scale so that it is in the right 2/3 of your video frame.
As I say, there are a number of potential problems with this kind of composite, so I'd recommend you do a very short test composition first, then output it and show it on the device or web site you hope to display it. That way you'll get the bugs out before you go investing a week's work into something that has you scrambling to fix at the last minute.

Similar Messages

How can I make the status bar hide automatically when using safari?

How can I make the status bar hide automatically when using safari?

When Safari is in FullScreen mode, menu bar will be hidden.
Safari window to fit the screen?
Move the mouse pointer to the bottom right corner of the Safari window.
Double arrows will appear. Drag it to resize the window to fit the screen.

How can I decide the size of HANA server when using DMO of SUM ?

Hi expert,
I want to execute DB migration from MS SQL to SAP HANA by using DMO of SUM.
So I have a question.
How can I decide the size of HANA server when using DMO of SUM ?
Now I have MS SQL in windows server.
But in order to use HANA , I have to prepare Linux server.
I want to know How can I decide the size of this Linux server.
Can I expect the function of data compression in HANA ?
Thanks in advance .
Kazuki.

Kazuki,
Please take attetion:
Your linux box already created = Application server:
Application Server
Based on the measurements SAP doesn't expect any changes concerning CPU, memory and network requirements for the ABAP application server. This means that the existing hardware and network infrastructure can still be used. Please check the PAM (www.service.sap.com/pam) for further details.
SAP HANA Appliance ( porvided by your hardware partner)
Consider SAP Note recommendation for HANA Main Memory, HANA CPU and HANA Disk Space.
Regards,
Edinaldo Junior

How can you access the printer settings in CS5 when using Epson 4900?

How can you access the printer settings when using Epson 4900 with CS5 12.1 x 64

Open the print dialog box, click "print settings".

How can we print the webreport into PDF file(not using the Web Analyzer)

Hi
I have a report in 'WAD 3.5' . And this report will be executed in the web browser .
My user wants to print this Web Report in the PDF file (or) import into excel file .
So how can we do it , if the report is in web browser .
Pls let me know
regards
suresh

Hi,
Check this link may be useful:
Displaying PDF file in browser
Rgs,
Ravikanth.

How can I make the jsp pages not displayed by using the navigation class?

I'm right now implementing a function on my program GUI . It's like whenever I click "STOP THE SERVER" button on the main page, I need those jsp pages relates to the server running to be not displayed, even by directly type in the URL(that's just stay in the main page), How can I do that? I heard that a navigation class might do it, but I'm not sure how. It might be great if some experts could help me!! Thanx a million !!
Shannon

See:
* [[Removing the Search Helper Extension and Bing Bar]]
You can use one of these extensions to adjust the default font size and page zoom on web pages:
* Default FullZoom Level - https://addons.mozilla.org/firefox/addon/6965
* NoSquint - https://addons.mozilla.org/firefox/addon/2592

In an outgoing email message the "attach" document icon does not work in firefox. It does work when using internet explorer. How can I get the "attach" key to work when using firefox?

Using firefox, if I am composing a new message in my hotmail account the "attachment" icon is not active, so nothing happens when I click on it in order to attach one of my word documents.
The "attachment" icon is active when I am using hotmail and internet explorer.

Firefox 3 will not run on OS X 10.3.9, it requires at least 10.4
Try one of these browsers to see if you can access Hotmail - [http://www.seamonkey-project.org/releases/seamonkey1.1.19/ SeaMonkey 1.1.19] or [http://caminobrowser.org/download/ Camino 1.6.11]

How can I control the FAQ title with CSS when using the Ajax effect

I am calling the FAQ module with the Ajax effect.
I would like to set different states with CSS to the title;
I have tried to use :hover, :active and :focus on the div.
It would be nice with a different styling when the item is "open"
(I know there is a problem with the stacking, but I posted that in another thread)
link

Hi
There is one thing You might miss in iDVD - So do I - the ability to re-arrange in the DVD map (block diagram)
The order things will be pplayed or addrssed is same as the order each item is introduced into iDVD.
To my knowledge ther is no way around this.
Yours Bengt W

How can I make the "add event" dialog in Lightning use 12-hour times?

The Add Event dialog in Lightning (on an iMac running OS 10.10.2 Yosemite) is displaying 24-hour times in the dropdown boxes. I need these to be in 12-hour format.
Also, the default calendar needs to be changed. Where are these preferences located?

I don't know what the acceptable setting values are, but you could experiment with
''calendar.date.format''
in the config editor. '''[http://kb.mozillazine.org/Menu_differences_in_Windows,_Linux,_and_Mac Tools|Options]'''|Advanced|General→Config editor
Mine is set to 1 and it's faithfully copying the date/time format I use elsewhere, but that may just be coincidence. But I suspect it is simply the toggle between long and short date formats as offered in the Options GUI for the calendar.
Bear in mind that all those AM/PM indicators will eat up precious screen real estate.
Settings for the Calendar are under Tools|Options (on Windows); that'll be Edit|Preferences or Thunderbird |Preferences.
'''[http://kb.mozillazine.org/Menu_differences_in_Windows,_Linux,_and_Mac Tools|Options]'''

Pop Up - how can I make the window in the backround visible?

Hi,
when I create a popup, the window in the background becomes unvisible as long as the popup is not closed. how can I make the background window become visible when the popup is open? I can hardly believe, that such a basic feature is not supported. But on the other hand, I also have some problemes with the sizing of the pop up...
Help is highly appreciated.
Kind Regards
Felix

...just found this thread. And I am not very happy about what I read. Is your system 701 or higher?
Re: Confirm Popup in Web Dynpro, window size
Cheers
Felxi

How can I make the execution of my script faster

Hi everyone
How can I make the execution of my script faster, because it takes a lot of time to execute? The following is my script:
DECLARE
CURSOR C1 IS
SELECT A.ITEM_CODE,A.STORE_CODE,ST_UNIT,SA_UNIT,CART_QTY,QUANTITY_ON_HAND
FROM PROJ.IM_LOCATION A
WHERE A.ITEM_CODE BETWEEN :ITEM_FRM AND :ITEM_TO
AND A.STORE_CODE = :FRM_STORE
ORDER BY
A.STORE_CODE ;
CURSOR C2 IS
SELECT A.ITEM_CODE,A.STORE_CODE,ST_UNIT,SA_UNIT,CART_QTY,QUANTITY_ON_HAND
FROM PROJ.IM_LOCATION A
WHERE A.ITEM_CODE BETWEEN :ITEM_FRM AND :ITEM_TO
AND A.STORE_CODE = :FRM_STORE
ORDER BY
A.STORE_CODE ;
big_syb_qty_issue number(12,3);
small_syb_qty_issue number(12,3);
big_issue number(12,3);
small_issue number(12,3);
item_syb_code varchar2(30);
big_syb_qty_rec number(12,3);
small_syb_qty_rec number(12,3);
BI_SUPP_REC number(12,3);
SM_SUPP_REC number(12,3);
big_syb_qty_ADJ number(12,3);
small_syb_qty_ADJ number(12,3);
big_ADJ number(12,3);
small_ADJ number(12,3);
big_syb_qty_rec_iner number(12,3);
small_syb_qty_rec_iner number(12,3);
BI_INTER number(12,3);
SM_INTER number(12,3);
cl_big_qty number(12,3);
cl_small_qty number(12,3);
cl_big_qty1 number(12,3);
cl_small_qty1 number(12,3);
BIG_QTY_OPEN number(12,3);
SMALL_QTY_OPEN number(12,3);
BEGIN
     IF ((:FRM_STORE IS NULL) OR (:ITEM_FRM IS NULL) OR (:ITEM_TO IS NULL) OR (:DATE_FRM IS NULL)) THEN
          SHOW_MESSAGE('You Should Enter the Parameters Values Correctly Please try again !!!! ');
          RAISE FORM_TRIGGER_FAILURE;
          GO_FIELD('DATE_FRM');
     END IF;
DELETE FROM STOCK_AT_DATE_REP2;
COMMIT;
cl_big_qty := 0;
cl_small_qty := 0;
-- MESSAGE('Please Wait The System Calculating The Transactions !!!');
SET_APPLICATION_PROPERTY(CURSOR_STYLE,'BUSY');
FOR R IN C1
LOOP
cl_big_qty := R.CART_QTY ;
cl_small_qty := R.QUANTITY_ON_HAND;
-- Transerfer Data 1
BEGIN
SELECT B.ITEM_CODE,SUM(NVL(CART_QTY,0)) ,SUM(NVL(ITEM_QUANTITY,0))
INTO item_syb_code,big_syb_qty_issue,small_syb_qty_issue
FROM IM_TRANS_ISSUE_HEADER A,IM_TRANS_ISSUE_DETAILS B
WHERE A.DOC_CODE = B.DOC_CODE
AND B.DEL_STORE = R.STORE_CODE
AND ITEM_CODE = R.ITEM_CODE
AND DOC_DATE > :DATE_TO
GROUP BY
B.ITEM_CODE;
-- SHOW_MESSAGE('ISSUED BIG'||' '||big_syb_qty_issue);
exception
when no_data_found then big_syb_qty_issue := 0;
small_syb_qty_issue := 0;
when others then MESSAGE(10,sqlerrm);
END ;
-- Goods Received Data From Supplier 1
BEGIN
SELECT B.ITEM_CODE,SUM(B.CART_QTY),SUM(ITEM_QUANTITY)
INTO item_syb_code,big_syb_qty_rec,small_syb_qty_rec
FROM IM_GOODS_RECIEVE_HEADER A,IM_GOODS_RECIEVE_DETAILS B
WHERE A.DOC_CODE = B.DOC_CODE
AND STORE_CODE = R.STORE_CODE
AND ITEM_CODE = R.ITEM_CODE
AND DOC_DATE > :DATE_TO
GROUP BY
B.ITEM_CODE;
-- SHOW_MESSAGE('RECEIVED FROM SUPPLIER BIG'||' '||big_syb_qty_rec);
exception
when no_data_found then big_syb_qty_rec := 0;
small_syb_qty_rec := 0;
when others then message(10,sqlerrm);
END ;
-- Adjustement Data 1
BEGIN
SELECT B.ITEM_CODE ,SUM(NVL(CART_QTY,0)) ADJUST_QTY,SUM(NVL(ITEM_QUANTITY,0))
INTO item_syb_code,big_syb_qty_ADJ,small_syb_qty_ADJ
FROM IM_ADJUST_HEADER A,IM_ADJUST_DETAILS B
WHERE A.DOC_CODE = B.DOC_CODE
AND B.STORE_CODE = R.STORE_CODE
AND ITEM_CODE = R.ITEM_CODE
AND A.DOC_DATE > :DATE_TO
GROUP BY
B.ITEM_CODE;
-- SHOW_MESSAGE('Adjust BIG'||' '||big_syb_qty_ADJ);
exception
when no_data_found then big_syb_qty_ADJ := 0;
small_syb_qty_ADJ := 0;
when others then message(10,sqlerrm);
END ;
-- Goods Received Data From Stores 1
BEGIN
SELECT B.ITEM_CODE,SUM(B.CART_QTY),SUM(ITEM_QUANTITY)
INTO item_syb_code,big_syb_qty_rec_iner,small_syb_qty_rec_iner
FROM IM_TRANS_REC_HEADER A,IM_TRANS_REC_DETAILS B
WHERE A.DOC_CODE = B.DOC_CODE
AND REC_STORE = R.STORE_CODE
AND ITEM_CODE = R.ITEM_CODE
AND DOC_DATE > :DATE_TO
GROUP BY
B.ITEM_CODE;
-- show_message('here');
-- SHOW_MESSAGE('Received From Stores BIG'||' '||big_syb_qty_rec_iner);
exception
when no_data_found then
big_syb_qty_rec_iner := 0;
small_syb_qty_rec_iner := 0;
when others then message(10,sqlerrm);
END ;
cl_big_qty := (NVL(cl_big_qty,0) + NVL(big_syb_qty_issue,0));
cl_big_qty := (NVL(cl_big_qty,0) - NVL(big_syb_qty_rec,0));
cl_big_qty := (NVL(cl_big_qty,0) - NVL(big_syb_qty_rec_iner,0));
big_syb_qty_ADJ := -1 * NVL(big_syb_qty_ADJ,0);
cl_big_qty := (NVL(cl_big_qty,0) + NVL(big_syb_qty_ADJ,0));
-- srw.message(2000,'cl_small_qty'||cl_small_qty);
cl_small_qty := (NVL(cl_small_qty,0) + NVL(small_syb_qty_issue,0));
cl_small_qty := (NVL(cl_small_qty,0) - NVL(small_syb_qty_rec,0));
cl_small_qty := (NVL(cl_small_qty,0) - NVL(small_syb_qty_rec_iner,0));
small_syb_qty_ADJ := -1 * NVL(small_syb_qty_ADJ,0);
cl_small_qty := (NVL(cl_small_qty,0) + NVL(small_syb_qty_ADJ,0));
-- srw.message(2000,'cl_small_qty'||cl_small_qty); srw.message(2000,'cl_small_qty'||cl_small_qty);
INSERT INTO STOCK_AT_DATE_REP2
VALUES(R.STORE_CODE,R.ITEM_CODE,cl_big_qty,cl_small_qty,R.ST_UNIT,R.SA_UNIT,:DATE_FRM,
:DATE_TO,0,0,0,0,0,0,0,0,cl_big_qty,cl_small_qty);
cl_big_qty := 0;
cl_small_qty := 0;
END LOOP;
COMMIT;
FOR R IN C2
LOOP
-- Transerfer Data 2
BEGIN
SELECT B.ITEM_CODE,SUM(NVL(CART_QTY,0)) ,SUM(NVL(ITEM_QUANTITY,0))
INTO item_syb_code,big_issue,small_issue
FROM IM_TRANS_ISSUE_HEADER A,IM_TRANS_ISSUE_DETAILS B
WHERE A.DOC_CODE = B.DOC_CODE
AND B.DEL_STORE = R.STORE_CODE
AND ITEM_CODE = R.ITEM_CODE
AND DOC_DATE BETWEEN :DATE_FRM AND :DATE_TO
GROUP BY
B.ITEM_CODE;
-- SHOW_MESSAGE('ISSUED BIG'||' '||big_syb_qty_issue);
exception
when no_data_found then
big_issue := 0;
small_issue := 0;
when others then MESSAGE(10,sqlerrm);
END ;
-- Goods Received Data From Supplier 2
BEGIN
SELECT B.ITEM_CODE,SUM(NVL(B.CART_QTY,0)),SUM(NVL(ITEM_QUANTITY,0))
INTO item_syb_code,BI_SUPP_REC,SM_SUPP_REC
FROM IM_GOODS_RECIEVE_HEADER A,IM_GOODS_RECIEVE_DETAILS B
WHERE A.DOC_CODE = B.DOC_CODE
AND STORE_CODE = R.STORE_CODE
AND ITEM_CODE = R.ITEM_CODE
AND DOC_DATE BETWEEN :DATE_FRM AND :DATE_TO
GROUP BY
B.ITEM_CODE;
-- SHOW_MESSAGE('1- SM_SUPP_REC '||' '||SM_SUPP_REC );
-- SHOW_MESSAGE('RECEIVED FROM SUPPLIER BIG'||' '||big_syb_qty_rec);
exception
when no_data_found then
BI_SUPP_REC := 0;
SM_SUPP_REC := 0;
when others then message(10,sqlerrm);
END ;
-- Adjustement Data 2
BEGIN
SELECT B.ITEM_CODE ,SUM(NVL(CART_QTY,0)) ADJUST_QTY,SUM(NVL(ITEM_QUANTITY,0))
INTO item_syb_code,big_ADJ,small_ADJ
FROM IM_ADJUST_HEADER A,IM_ADJUST_DETAILS B
WHERE A.DOC_CODE = B.DOC_CODE
AND B.STORE_CODE = R.STORE_CODE
AND ITEM_CODE = R.ITEM_CODE
AND A.DOC_DATE BETWEEN :DATE_FRM AND :DATE_TO
GROUP BY
B.ITEM_CODE;
-- SHOW_MESSAGE('Adjust BIG'||' '||big_syb_qty_ADJ);
exception
when no_data_found then
big_ADJ := 0;
small_ADJ := 0;
when others then message(10,sqlerrm);
END ;
-- Goods Received Data From Stores 2
BEGIN
SELECT B.ITEM_CODE,SUM(NVL(B.CART_QTY,0)),SUM(NVL(ITEM_QUANTITY,0))
INTO item_syb_code,BI_INTER,SM_INTER
FROM IM_TRANS_REC_HEADER A,IM_TRANS_REC_DETAILS B
WHERE A.DOC_CODE = B.DOC_CODE
AND REC_STORE = R.STORE_CODE
AND ITEM_CODE = R.ITEM_CODE
AND DOC_DATE BETWEEN :DATE_FRM AND :DATE_TO
GROUP BY
B.ITEM_CODE;
-- show_message('here');
-- SHOW_MESSAGE('Received From Stores BIG'||' '||big_syb_qty_rec_iner);
exception
when no_data_found then
BI_INTER := 0;
SM_INTER := 0;
when others then message(10,sqlerrm);
END ;
BEGIN
     BIG_QTY_OPEN := 0;
SMALL_QTY_OPEN := 0;
BEGIN
SELECT NVL(S_BIG_QTY_OPEN,0) ,NVL(S_SMALL_QTY_OPEN,0)
INTO
BIG_QTY_OPEN,SMALL_QTY_OPEN
FROM STOCK_AT_DATE_REP2
WHERE S_STORE_CODE = R.STORE_CODE
AND S_ITEM_CODE = R.ITEM_CODE;
END;
BIG_QTY_OPEN := ((BIG_QTY_OPEN) + NVL(big_issue,0));
BIG_QTY_OPEN := ((BIG_QTY_OPEN) - NVL(BI_SUPP_REC,0));
big_adj := -1 * NVL(big_adj,0);
BIG_QTY_OPEN := ((BIG_QTY_OPEN) + NVL(big_adj,0));
BIG_QTY_OPEN := ((BIG_QTY_OPEN) - NVL(BI_INTER,0));
SMALL_QTY_OPEN := ((SMALL_QTY_OPEN) + NVL(SMALL_issue,0));
SMALL_QTY_OPEN := ((SMALL_QTY_OPEN) - NVL(SM_SUPP_REC ,0));
SMALL_adj := -1 * NVL(SMALL_adj,0);
SMALL_QTY_OPEN := ((SMALL_QTY_OPEN) + NVL(SMALL_adj,0));
SMALL_QTY_OPEN := ((SMALL_QTY_OPEN) - NVL(SM_INTER,0));
END;
BEGIN
UPDATE STOCK_AT_DATE_REP2
SET BIG_SUP_REC = BI_SUPP_REC,
SMALL_SUP_REC = SM_SUPP_REC,
BIG_ISSUE_TRAN = big_issue,
SMALL_ISSUE_TRAN = SMALL_issue,
BIG_ADJUST = big_adj,
SMALL_ADJUST = SMALL_adj,
BIG_INTER_REC = BI_INTER,
SMALL_INTER_REC = SM_INTER,
S_BIG_QTY_OPEN = BIG_QTY_OPEN,
S_SMALL_QTY_OPEN = SMALL_QTY_OPEN
WHERE S_STORE_CODE = R.STORE_CODE
AND S_ITEM_CODE = R.ITEM_CODE;
exception
when no_data_found then
NULL;
when others then
message(10,sqlerrm);
END;
END LOOP;
COMMIT;
SET_APPLICATION_PROPERTY(CURSOR_STYLE,'default');
SYNCHRONIZE;
-- SHOW_MESSAGE('The Data Have Been Calculated !!!');
END;
declare
     pl_id ParamList;
APPLICATION_ID VARCHAR2(20):='PRD';
          COMMAND_LINE VARCHAR2(100) :='STOCK_LEDGER';
BEGIN
pl_id := Get_Parameter_List('tmpdata');
IF NOT Id_Null(pl_id) THEN
Destroy_Parameter_List( pl_id );
END IF;
pl_id := Create_Parameter_List('tmpdata');
Add_Parameter(pl_id,'DATE_FRM',TEXT_PARAMETER,:DATE_FRM);
Add_Parameter(pl_id,'DATE_TO',TEXT_PARAMETER,:DATE_TO);
Add_Parameter(pl_id,'ITEM_FRM',TEXT_PARAMETER,:ITEM_FRM);
Add_Parameter(pl_id,'ITEM_TO',TEXT_PARAMETER,:ITEM_TO);
Add_Parameter(pl_id,'FRM_STORE',TEXT_PARAMETER,:FRM_STORE);
IF :REPORT_TYPE = 1 THEN
Run_Product(REPORTS,'C:\INV\RDF\STOCK_LEDGER.rdf',SYNCHRONOUS,RUNTIME,
FILESYSTEM, pl_id,NULL);
ELSIF :REPORT_TYPE = 2 THEN
Run_Product(REPORTS,'C:\INV\RDF\STOCK_LEDGER_2.rdf',SYNCHRONOUS,RUNTIME,
FILESYSTEM, pl_id,NULL);
END IF;
END;
Waiting for your valuable answer
Best Regards
Jamil Alshaibani

Make a matte in Photoshop.
From the Photoshop menu bar: File > New > Film & Video Presets. Choose one that suits your FCP project pixel dimensions. Make the background black. Place a white rectangle with rounded corners on top (the white will determine how much of your picture is visible). Flatten Image. Save as TIFF. Import into FCP.
Move your video clips up to V2. Place the imported TIFF on V1. Highlight all clips on V2.
Go to Modify > Composite Mode > Travel Matte Luma. Done.
If you want soft edges, no need for a matte. Double click your clip to place it in the Viewer. Open up the Motion tab > Crop > Edge Feather. Nice and quick. Copy and Paste attributes for the other clips.

HT1364 I have moved my library to an external hard drive and changed the location of the iTunes media folder in Preferences, but every time I close and re-open iTunes, I have to do it all over again. How can I make the iTunes media folder change permanen

I have moved my library to an external hard drive and changed the location of the iTunes media folder in Preferences, but every time I close and re-open iTunes, I have to do it all over again. How can I make the iTunes media folder change permanent? I have an older machine with Windows XP.

I don't believe mounting the hard drive should be necessary, unless you have several external drives and want your computer to recognise them as folders, rather than drives. I've never had to mount a hard drive, ever. If you don't know how to do it, then it shouldn't be necessary now.
Try this:
Prepare iTunes so that it can see the external drive.
Make a note of which drive-letter the external drive has been allocated. (Look in Windows Exploer)
Look at the file location for a song. Make sure it plays (and therefore that iTunes has found it). Highlight it and select File/Get Info/Summary>Where: and make a note of the drive letter for that song.
Close and shut down the computer.
The next time you turn the computer on again, connect the external drive
Before you start iTunes - check the external drive in Windows Explorer. Is it ready, does it have the same drive-letter that it had last time? Can you go into the drive and see the files on it?
Once you can, start iTunes. (If the drive lettter has changed, you need to work out why before going any further.)
If iTunes fails to find your external drive, you need to check where iTunes is looking for your Library.
Select the same song you checked before (presumably iTunes can no longer find it). Follow the procedure for locating it. You should be able to see where iTunes thinks the file is. It's the drive that counts. Which drive letter is iTunes looking at? Is it the same one that it was previously (which should also be the same one that the drive has now).
What happens, which step do you have problems with?
Message was edited by: the fiend

I need to play a song on a Keynote presentation, how do I do this ? I use to drag and drop the mp3 in Keynote but it stops playing when the slide move to the other one... how can I make the song keep playing through the whole presentation ? Thanks.

I need to play a song in a row in a Keynote presentation, how do I do this ? I use to drag and drop the mp3 in Keynote but it stops playing when the slide move to the other one... how can I make the song keep playing through out the presentation ?
Thanks.

Drag the file into the audio window in the Document inspector...

How can i make the text go vertically in numbers

How can I make the text vertical in numbers? I have merged the cells and cannot find an option for making it go vertical as opposed to horizontal.

I already gave two tools to fit this kind of needs.
tip #1 :
--{code}
--[SCRIPT write_vertically]
Enregistrer le script en tant que Script : write_vertically.scpt
déplacer le fichier ainsi créé dans le dossier
<VolumeDeDémarrage>:Utilisateurs:<votreCompte>:Bibliothèque:Scripts:Applications :Numbers:
Il vous faudra peut-être créer le dossier Numbers et peut-être même le dossier Applications.
Saisir dans une cellule le mot à écrire verticalement puis le sélectionner.
ATTENTION, il ne faut pas sélectionner la cellule mais le mot qui doit apparaitre surligné.
Aller au menu Scripts , choisir Numbers puis choisir “write_vertically”
Le script colle dans la cellule le mot apès avoir inséré un return entre tous les caractères.
Pour mon usage personnel j'associe un raccourci à ce script grace à FastScripts.
--=====
L’aide du Finder explique:
L’Utilitaire AppleScript permet d’activer le Menu des scripts :
Ouvrez l’Utilitaire AppleScript situé dans le dossier Applications/AppleScript.
Cochez la case “Afficher le menu des scripts dans la barre de menus”.
Sous 10.6.x,
aller dans le panneau “Général” du dialogue Préférences de l’Éditeur Applescript
puis cocher la case “Afficher le menu des scripts dans la barre des menus”.
--=====
Save the script as a Script: write_vertically.scpt
Move the newly created file into the folder:
<startup Volume>:Users:<yourAccount>:Library:Scripts:Applications:Numbers:
Maybe you would have to create the folder Numbers and even the folder Applications by yourself.
In a cell, type a word to write vertically then select it.
CAUTION, don’t select the cell but the word which must be highlighted.
Go to the Scripts Menu, choose Numbers, then choose “write_vertically”
The script insert in the cell the word after inserting a return between every characters.
For my own use, I link a shortcut to the script thank to FastScripts.
--=====
The Finder’s Help explains:
To make the Script menu appear:
Open the AppleScript utility located in Applications/AppleScript.
Select the “Show Script Menu in menu bar” checkbox.
Under 10.6.x,
go to the General panel of AppleScript Editor’s Preferences dialog box
and check the “Show Script menu in menu bar” option.
--=====
Yvan KOENIG (VALLAURIS, France)
2011/12/17
2012/01/01 no longer use a local variable, use result
--=====
on run
Clear the clipboard *)
set the clipboard to ""
Copy the selection in the clipboard *)
          my raccourci("Numbers", "c", "c")
Loop waiting that the clipboard is really filled *)
          repeat
                    try
                              if (the clipboard as text) is not "" then exit repeat
                    on error
                    end try
          end repeat
Extract the clipboard's content *)
the clipboard as text
Insert return between every characters *)
          my recolle(every character of result, return)
Fill the clipboard with the edited string *)
set the clipboard to result
Paste in the cell *)
          my raccourci("Numbers", "v", "cas")
end run
--=====
on recolle(l, d)
          local oTIDs, t
          set oTIDs to AppleScript's text item delimiters
          set AppleScript's text item delimiters to d
          set t to l as text
          set AppleScript's text item delimiters to oTIDs
          return t
end recolle
--=====
on activateGUIscripting()
(* to be sure than GUI scripting will be active *)
          tell application "System Events"
                    if not (UI elements enabled) then set (UI elements enabled) to true
          end tell
end activateGUIscripting
--=====
==== Uses GUIscripting ====
This handler may be used to 'type' text, invisible characters if the third parameter is an empty string.
It may be used to 'type' keyboard raccourcis if the third parameter describe the required modifier keys.
I changed its name « shortcut » to « raccourci » to get rid of a name conflict in Smile.
on raccourci(a, t, d)
          local k
          tell application a to activate
          tell application "System Events" to tell application process a
                    set frontmost to true
                    try
                              t * 1
                              if d is "" then
key code t
                              else if d is "c" then
key code t using {command down}
                              else if d is "a" then
key code t using {option down}
                              else if d is "k" then
key code t using {control down}
                              else if d is "s" then
key code t using {shift down}
                              else if d is in {"ac", "ca"} then
key code t using {command down, option down}
                              else if d is in {"as", "sa"} then
key code t using {shift down, option down}
                              else if d is in {"sc", "cs"} then
key code t using {command down, shift down}
                              else if d is in {"kc", "ck"} then
key code t using {command down, control down}
                              else if d is in {"ks", "sk"} then
key code t using {shift down, control down}
                              else if (d contains "c") and (d contains "s") and d contains "k" then
key code t using {command down, shift down, control down}
                              else if (d contains "c") and (d contains "s") and d contains "a" then
key code t using {command down, shift down, option down}
                              end if
                    on error
                              repeat with k in t
                                        if d is "" then
keystroke (k as text)
                                        else if d is "c" then
keystroke (k as text) using {command down}
                                        else if d is "a" then
keystroke k using {option down}
                                        else if d is "k" then
keystroke (k as text) using {control down}
                                        else if d is "s" then
keystroke k using {shift down}
                                        else if d is in {"ac", "ca"} then
keystroke (k as text) using {command down, option down}
                                        else if d is in {"as", "sa"} then
keystroke (k as text) using {shift down, option down}
                                        else if d is in {"sc", "cs"} then
keystroke (k as text) using {command down, shift down}
                                        else if d is in {"kc", "ck"} then
keystroke (k as text) using {command down, control down}
                                        else if d is in {"ks", "sk"} then
keystroke (k as text) using {shift down, control down}
                                        else if (d contains "c") and (d contains "s") and d contains "k" then
keystroke (k as text) using {command down, shift down, control down}
                                        else if (d contains "c") and (d contains "s") and d contains "a" then
keystroke (k as text) using {command down, shift down, option down}
                                        end if
                              end repeat
                    end try
          end tell
end raccourci
--=====
--[/SCRIPT]
--{code}
tip #2 :
--{code}
--[SCRIPT rotate_cell_contents]
Enregistrer le script en tant que Script : rotate_cell_contents.scpt
déplacer le fichier ainsi créé dans le dossier
<VolumeDeDémarrage>:Users:<votreCompte>:Library:Scripts:Applications:Numbers:
Il vous faudra peut-être créer le dossier Numbers et peut-être même le dossier Applications.
Sélectionner une cellule dont le texte doit être tourné de 90 degrés.
Aller au menu Scripts , choisir Numbers puis choisir “rotate_cell_contents”
--=====
L’aide du Finder explique:
L’Utilitaire AppleScript permet d’activer le Menu des scripts :
Ouvrez l’Utilitaire AppleScript situé dans le dossier Applications/AppleScript.
Cochez la case “Afficher le menu des scripts dans la barre de menus”.
Sous 10.6.x,
aller dans le panneau “Général” du dialogue Préférences de l’Éditeur Applescript
puis cocher la case “Afficher le menu des scripts dans la barre des menus”.
--=====
Save the script as a Script: rotate_cell_contents.scpt
Move the newly created file into the folder:
<startup Volume>:Users:<yourAccount>:Library:Scripts:Applications:Numbers:
Maybe you would have to create the folder Numbers and even the folder Applications by yourself.
Select a cell whose contents must be rotated for 90 degrees.
Go to the Scripts Menu, choose Numbers, then choose “rotate_cell_contents”
--=====
The Finder’s Help explains:
To make the Script menu appear:
Open the AppleScript utility located in Applications/AppleScript.
Select the “Show Script Menu in menu bar” checkbox.
Under 10.6.x,
go to the General panel of AppleScript Editor’s Preferences dialog box
and check the “Show Script menu in menu bar” option.
--=====
Yvan KOENIG (VALLAURIS, France)
2011/06/23
2011/06/26 -- No longer use an auxiliary text box. Now keep the text attributes.
2012/01/31 -- edited for Lion
--=====
on run
          local dName, sName, tName, rowNum1, colNum1, rowNum2, colNum2
          local le_texte, la_largeur, la_hauteur, myNewDoc
          my activateGUIscripting()
Extract properties of the source/target cell *)
          set {dName, sName, tName, rowNum1, colNum1, rowNum2, colNum2} to my get_SelParams()
          tell application "Numbers" to tell document dName to tell sheet sName to tell table tName
                    set selection range to range (name of column colNum1 & name of row rowNum1)
          end tell
Cut*)
          my raccourci("Numbers", "x", "c")
Trigger Preview *)
          tell application "System Events"
                    if "Preview" is not in (name of every application process) then launch application "Preview"
          end tell
delay 0.2 -- required
New document from the clipboard *)
          my raccourci("Preview", "n", "c")
Rotate to left *)
          my raccourci("Preview", "l", "c")
Copy *)
          my raccourci("Preview", "c", "c")
Quit *)
          my raccourci("Preview", "q", "c")
          (system attribute "sys2") < 7
          if result then
Click the [Don't Save] button in the warning sheet *)
                    tell application "Preview" to activate
                    tell application "System Events" to tell application process "Preview" to tell window 1
                              name of buttons
                              repeat 50 times
                                        delay 0.1
                                        if exists sheet 1 then exit repeat
                              end repeat
                              tell sheet 1 to click button 2
                    end tell
          end if
Back to Numbers *)
          tell application "Numbers" to tell document dName to tell sheet sName to tell table tName
-- just reset the focus on the table
          end tell
Paste in the cell *)
          my raccourci("Numbers", "v", "c")
end run
--=====
set { dName, sName, tName, rowNum1, colNum1, rowNum2, colNum2} to my get_SelParams()
tell application "Numbers" to tell document dName to tell sheet sName to tell table tName
on get_SelParams()
          local d_name, s_name, t_name, row_num1, col_num1, row_num2, col_num2
          tell application "Numbers" to tell document 1
                    set d_name to its name
                    set s_name to ""
                    repeat with i from 1 to the count of sheets
                              tell sheet i to set maybe to the count of (tables whose selection range is not missing value)
                              if maybe is not 0 then
                                        set s_name to name of sheet i
                                        exit repeat
                              end if -- maybe is not 0
                    end repeat
                    if s_name is "" then
                              if my parleAnglais() then
                                        error "No sheet has a selected table embedding at least one selected cell !"
                              else
                                        error "Aucune feuille ne contient une table ayant au moins une cellule sélectionnée !"
                              end if

How can I make the sort default "by date" in iPhoto?

On one of my computers, every time I load an event, it goes to the top of the library and I have to go to "sort/by date" to get it to go to the end or bottom of the library...where I want it.
On my other computers, the default seems to be "by date" normally....
How can I make the default sort option "by date?"
Thanks.

I am not by that computer now. But that makes sense.
I combine events that are imported into that iPhoto. I suppose that would qualify as manually sorting....right?
Still, shouldn't there be a way to overide that and make "date" the default. That is, if your observation is correct.
(I'll take a look tomorrow....)
Thanks!!

How can I make the Strip Silence window wider?

Hi.
How can I make the Strip Silence window wider? Right now it just fits my MacBook screen, so
I can´t actually see what I am doing. I saw a tutorial where the Strip Silence window went outside
the screen on both sides so you could go into detail on the file.
All the best, Henning...

Also, I believe the size of the strip silence window has something to do with the length of the region you are editing.
-Ben

How can I make the project into 16:9 when using 2 4:3 aspect ratio videos in project

Similar Messages

Maybe you are looking for