How can I make the 'remote' app work across a routed network?

So, I have trusted and guest networks, with iTunes running on a Mac on the trusted network. I'd like iOS devices on the guest network to be able to use the 'remote' app, specifically the DJ function.
I think there will be two components:
-- service discovery. Apple likes mDNS (Bonjour), so possibly can be done like this: https://discussions.apple.com/thread/2751128?start=0&tstart=0 but one would need to figure out what service discovery records remote is looking for.
-- traffic. Appropriate traffic would need to be allowed between the two networks.
Has anyone looked at the wire traffic for remote, or gotten this to work?
Thanks,
Heath

Welcome to the Apple Community Dylan.
There is no way to set up home sharing on the Apple TV without the original remote from Apple, you will need to purchase a new remote from the Apple Store.
If you already have homesharing set up on the Apple TV, you merely need to set it up in the remote app settings.

Similar Messages

I have a new iPhone 5C, have the sounds alerts set up. But I'm not getting sound alerts for new voicemail, only the red circle on the screen. How can I make the sound alert work?

I have a new iPhone 5C, have the sounds alerts set up. But I'm not getting sound alerts for new voicemail, only the red circle on the screen. How can I make the sound alert work?

I have had this same problem for weeks now with my 4S. I just got a new 5S after being extremely frustrated and the same thing - no sounds. After searching posts all over, I couldn't find a solution. I just told my friend of the issue and he asked "Do you have the Do Not Distrub on?" I didn't even know such a function existed. Upon looking that was exactly the issue.
To resolve, go to Settings> Do Not Disturb> Manual. If it is green, turn it off. You will now get phone calls and text alerts.
This functionality is also on your quick access utility menu (slide up menu). I assume this is how it was enabled on my phone.
I will post on other sites since I searched for weeks for this solution and didn't see it anywhere. Good luck!

My husband uses adobe cs5. The clone tool isn't working and after resetting the tools adobe bridge now goes to picasa. How can we make the clone tool work and have bridge go to cs5 not picasa?

My husband uses adobe cs5. The clone tool isn't working and after resetting the tools adobe bridge now goes to picasa. How can we make the clone tool work and have bridge go to cs5 not picasa?

A lot more information about your hardware and software is needed.
BOILERPLATE TEXT:
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CC", but something like CC2014.v.2.2) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
a screen shot of your settings or of the image could be very helpful too,
etc.,
someone may be able to help you (not necessarily this poster, who is not a Windows user).
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

How can I make the editor photoshop work

how can I make the editor photoshop work? it can not work at all.
please help me . thanks

You need to tell us at least what program you are referring to and some system info...
Mylenium

How do I use the remote app on a dual band network?

There are 2 routers in my home. One is dual band (SSID: NETGEAR49-5G). This one is being used as a 5GHz access point while the other (SSID: NETGEAR49) is being used as a 2.4GHz extender. However I can't use the Remote app to control my iTunes library, regardless of which router I connect to. I can't even use a passcode to add my library because I just keep getting an error saying I entered the wrong code. Strangely everything's fine if I turn off the 2.4GHz router, but I don't want to have to keep doing that. Is there any way I can configure the two routers so I can use the Remote app and other network-based services??

Hi,
I can tell you how it works on my iPhone.
I click the Messages icon to open it.
I click the box with pencil icon top right for New Message
I start to type the name of the person I want to contact in the "To" spot.
(Alternatively use the Blue + icon and select direct from Contacts list)
I select the full name of Contact from any list if there are multiples.
Once the person and their Contact option is selected I click on the text field at the bottom of screen
Using the "keyboard" I type the Message and then the Send button.
9:45 PM Saturday; June 9, 2012
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 iMac 2.5Ghz 5i 2011 (Lion 10.7.4)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.7.4),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

How can I set the Remote app to work if I have lost my apple remote?

I lost my remote to my Apple TV and I can't go into town to get another at the moment because there was a lot of snow and ice here. So, I'm wondering how I can set my iPhone 5 up as a remote using the remote app without the normal remote. I know the remote app used to auto-connect to the Apple TV, but since recent updates, you have to set it up as a remote on the actual Apple TV itself. Is there a way to get around this? Thanks in advance!

Welcome to the Apple Community Dylan.
There is no way to set up home sharing on the Apple TV without the original remote from Apple, you will need to purchase a new remote from the Apple Store.
If you already have homesharing set up on the Apple TV, you merely need to set it up in the remote app settings.

TS1741 how can I use the remote app for my Apple TV when I am using the Apple TV away from home!?

I'm traveling and using the Apple TV at the hotel but the remote app is not working cause I can't turn on home sharing from my p&c, cause its not here

Most hotels tend to require a login to the network via browser, which the ATV doesn't have. You won't be able to access the network for any functions if that's the case.
You may want to contact someone at the hotel to clarify.

How can i make my ipad apps work again?

i have this iPad2 wifi+3g for like five months now but iv never tried sync it on my laptop. Just yesterday i decided to try sync but im frightened when a pop up window appears said that syncing will erase all the data i had on my iPad including my favorite movies and apps.It's been two days now that i've been tinkering my iPad apps.My 1st problem now is i lost all my movies that my friend installed on my iPad and i dont know how to retrieve it. 2) i foldered my apps and sync it and also update it to iOs5 but after the update and syncing my apps doesnt work now like my bookworm and few other games doesn't work but it's still there on my folder.
Can someone help me please... a detailed instruction is immensely appreciated .

If the movies that your friend installed on your iPad were not bought with your Apple ID or are not in your iTunes library - they are gone - unless he reinstalls them or you sync again with iTunes (if they are in your library).
If you bought the movies with your ID and you live in the U.S., you can download many movies again for free using the purchased tab in iTunes.
If your third party apps no longer work, try downloading another app on your iPad - any free app is fine. That will reset your iTunes authorization and should reset the other apps.

How can I make the web server work on port 80 and not 443. I can only access my website using https.

On a Mac Mini server with OS X Lion 10.7.2, I am unalbe to get the web server working on port 80. It switches automatically to port 443 (https).
This situation complicates the access to FileMaker Web publishing, as I don't want my clients having to use https.
How can I change that? Does anyone know?
Thanks for any reply

in the server: I checked the SSL certificate. Tried several configuration.
Well, that's a problem for a start.
Your port 80 connection should NOT use SSL. Port 80 is the standard HTTP port, not HTTPS and most applications that connect to port 80 will not expect to use SSL
If you want to run a site under both HTTP and HTTPS then you create two sites, one on port 80 without SSL and one on port 443 with SSL

How can I make the FN buttons work with an older notebook?

Hi,
I have the Satellite 5200-902 notebook. Unfortunately there is no support for such an "old" notebook like this concerning Windows Vista. Vista runs great on it but the only thing I didn´t make is to make to FN buttons work in Vista.
Can someone please give me an advice ?
Thanks

Hello Danny
Unfortunately I do not believe you will have success with those buttons. The fact is that Toshiba use self designed utility for functionality of all FN buttons. As you know, old notebook models are not vista supported and you will not be able to find and install any utility for that.
Sorry but there is nothing to do.

How can I make the ruler guides work?

I am working on a large document. For some reason, I cannot extend the ruler guides onto most pages. They will appear on some pages though. Does anyone know why this happens and how to fix it?

If the mouse is over a page when you release, the guide will be confined to that page, so horizontal guides will appear only on one side of a two-page spread. You can hold Ctrl (Cmd) while dragging to make them extend across the entire spread and pasteboard, or releas the mouse over the pasteboard for the same result.

How can I make the ${foo} syntax work?

Hello,
I have a jsp page and I am using Webwork with the action class exposing beans to the ognl value stack.
Should I be able to write ${foo} with JSTL? I get the expected value if I write <c:out value="${foo}"/> I do get the expected value.
The real reason I am asking is because I am trying to use a custom taglib and the parameters are not being evaluated. For example, ${accounts} should represent a collection and when I use <input:selectBox options="${accounts}"/> - the actual string "${accounts}" is passed to the tag. I would really appreciate some help. Thank you very much.
I am using apache-tomcat 4.1.39 with jakarta-taglibs-standard-1.0.6 for the JSTL implementation. Thank you very much for any help you might be able to offer.
Regards,
Joe

Thank you very much for the response... that makes a lot of sense. I still have 1 question though... this is the strange part;
The standard JSTL taglibs seem to be able to handle the ${} syntax yet I am also working with a custom taglib that does not seem to have the tags parsed. If you can help me fix this, I would be extremely grateful...
This works fine:
<c:forEach items="${accounts}" var="account">
     <c:out value="${account.accountNumber}"/>
</c:forEach>
But, when using the custom taglib:
<input:selectBox options="${accounts}"/>
the options value in the tag class is actually "${accounts}" and no the list which ${accounts} represents. Do you have any idea as to why this would occur? Here is the tld (snipped to show the parts I am referring to)
     <tag>
          <name>selectBox</name>
          <tag-class>example.SelectBoxTag</tag-class>
          <body-content>JSP</body-content>
          <display-name>selectBox</display-name>
          <attribute>
               <name>options</name>
               <required>false</required>
               <rtexprvalue>true</rtexprvalue>
               <type>java.lang.Object</type>
               <description>Any collection of elements to be added to select list</description>
          </attribute>
     </tag>
thank you very much.
Joe

How can I make the camera flash work on my iphone

The camera on my iphone works fine, however the flash does not work? I have checked the options for the camera and cant seem to get it to flash when taking a picture in a dark area where the flash is critical can anyone help ?

iPhone User Guide
The Basic Troubleshooting Steps are:
Restart... Reset... Restore from Backup... Restore as New...
Restart / Reset
http://support.apple.com/kb/ht1430
Backing up, Updating and Restoring
http://support.apple.com/kb/HT1414

How can I make the wireless keyboard work

MMy wireless keyboard was working when I purchased it it at the end of dec. now it's not working.

Please post more details.
Is your keyboard an Apple keyboard. Did you buy it new. Was it in its original packing. Where did you buy it from?
Have you recently put in new batteries. What brand are they?

How can I make the analyze clip work?

I just installed CC 2014 and was hoping the analyze clip functionality would be fixed. But, after trying several things, I still can't get it to do speech recognition.
Running the latest iMac and Mavericks.
Can anyone help?

You need to tell us at least what program you are referring to and some system info...
Mylenium

How can I make the 'remote' app work across a routed network?

Similar Messages

Maybe you are looking for