How can i make the sound louder than it already is?

How can i make this laptop louder than it already is? Is the sound quality of this mode typically this low?

Hi,
Are you talking about a home theater which is connected to you laptop or the laptop istelf ? If the laptop itself then what is it ? To help us answer question quicker, please read this:
http://h30434.www3.hp.com/t5/First-Time-Here-Learn-How-to/Welcome-Get-started-here/td-p/699035
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Similar Messages

I have a new iPhone 5C, have the sounds alerts set up. But I'm not getting sound alerts for new voicemail, only the red circle on the screen. How can I make the sound alert work?

I have a new iPhone 5C, have the sounds alerts set up. But I'm not getting sound alerts for new voicemail, only the red circle on the screen. How can I make the sound alert work?

I have had this same problem for weeks now with my 4S. I just got a new 5S after being extremely frustrated and the same thing - no sounds. After searching posts all over, I couldn't find a solution. I just told my friend of the issue and he asked "Do you have the Do Not Distrub on?" I didn't even know such a function existed. Upon looking that was exactly the issue.
To resolve, go to Settings> Do Not Disturb> Manual. If it is green, turn it off. You will now get phone calls and text alerts.
This functionality is also on your quick access utility menu (slide up menu). I assume this is how it was enabled on my phone.
I will post on other sites since I searched for weeks for this solution and didn't see it anywhere. Good luck!

How can I make the voice very loud when navigating with my google gps app?

How can I make the navigation voice on my google gps app VERY loud?

I did a search for the Citibank virtual credit card and other similar words and could find nothing.

How can i make voiceover read paragraphs than reading the entire page

how can i make voiceover read paragraphs than reading the entire page of an ebook

If you are using rectangle as layer or accordion menu then you can use 100% width for these page items.
In control strip options , when you select the rectangle you can view 100% width button which would make it browser width.
http://tv.adobe.com/watch/muse-feature-tour/muse-design-for-flexible-browser-width/
Thanks,
Sanjit

HT1364 I have moved my library to an external hard drive and changed the location of the iTunes media folder in Preferences, but every time I close and re-open iTunes, I have to do it all over again. How can I make the iTunes media folder change permanen

I have moved my library to an external hard drive and changed the location of the iTunes media folder in Preferences, but every time I close and re-open iTunes, I have to do it all over again. How can I make the iTunes media folder change permanent? I have an older machine with Windows XP.

I don't believe mounting the hard drive should be necessary, unless you have several external drives and want your computer to recognise them as folders, rather than drives. I've never had to mount a hard drive, ever. If you don't know how to do it, then it shouldn't be necessary now.
Try this:
Prepare iTunes so that it can see the external drive.
Make a note of which drive-letter the external drive has been allocated. (Look in Windows Exploer)
Look at the file location for a song. Make sure it plays (and therefore that iTunes has found it). Highlight it and select File/Get Info/Summary>Where: and make a note of the drive letter for that song.
Close and shut down the computer.
The next time you turn the computer on again, connect the external drive
Before you start iTunes - check the external drive in Windows Explorer. Is it ready, does it have the same drive-letter that it had last time? Can you go into the drive and see the files on it?
Once you can, start iTunes. (If the drive lettter has changed, you need to work out why before going any further.)
If iTunes fails to find your external drive, you need to check where iTunes is looking for your Library.
Select the same song you checked before (presumably iTunes can no longer find it). Follow the procedure for locating it. You should be able to see where iTunes thinks the file is. It's the drive that counts. Which drive letter is iTunes looking at? Is it the same one that it was previously (which should also be the same one that the drive has now).
What happens, which step do you have problems with?
Message was edited by: the fiend

How can i make the text go vertically in numbers

How can I make the text vertical in numbers? I have merged the cells and cannot find an option for making it go vertical as opposed to horizontal.

I already gave two tools to fit this kind of needs.
tip #1 :
--{code}
--[SCRIPT write_vertically]
Enregistrer le script en tant que Script : write_vertically.scpt
déplacer le fichier ainsi créé dans le dossier
<VolumeDeDémarrage>:Utilisateurs:<votreCompte>:Bibliothèque:Scripts:Applications :Numbers:
Il vous faudra peut-être créer le dossier Numbers et peut-être même le dossier Applications.
Saisir dans une cellule le mot à écrire verticalement puis le sélectionner.
ATTENTION, il ne faut pas sélectionner la cellule mais le mot qui doit apparaitre surligné.
Aller au menu Scripts , choisir Numbers puis choisir “write_vertically”
Le script colle dans la cellule le mot apès avoir inséré un return entre tous les caractères.
Pour mon usage personnel j'associe un raccourci à ce script grace à FastScripts.
--=====
L’aide du Finder explique:
L’Utilitaire AppleScript permet d’activer le Menu des scripts :
Ouvrez l’Utilitaire AppleScript situé dans le dossier Applications/AppleScript.
Cochez la case “Afficher le menu des scripts dans la barre de menus”.
Sous 10.6.x,
aller dans le panneau “Général” du dialogue Préférences de l’Éditeur Applescript
puis cocher la case “Afficher le menu des scripts dans la barre des menus”.
--=====
Save the script as a Script: write_vertically.scpt
Move the newly created file into the folder:
<startup Volume>:Users:<yourAccount>:Library:Scripts:Applications:Numbers:
Maybe you would have to create the folder Numbers and even the folder Applications by yourself.
In a cell, type a word to write vertically then select it.
CAUTION, don’t select the cell but the word which must be highlighted.
Go to the Scripts Menu, choose Numbers, then choose “write_vertically”
The script insert in the cell the word after inserting a return between every characters.
For my own use, I link a shortcut to the script thank to FastScripts.
--=====
The Finder’s Help explains:
To make the Script menu appear:
Open the AppleScript utility located in Applications/AppleScript.
Select the “Show Script Menu in menu bar” checkbox.
Under 10.6.x,
go to the General panel of AppleScript Editor’s Preferences dialog box
and check the “Show Script menu in menu bar” option.
--=====
Yvan KOENIG (VALLAURIS, France)
2011/12/17
2012/01/01 no longer use a local variable, use result
--=====
on run
Clear the clipboard *)
set the clipboard to ""
Copy the selection in the clipboard *)
          my raccourci("Numbers", "c", "c")
Loop waiting that the clipboard is really filled *)
          repeat
                    try
                              if (the clipboard as text) is not "" then exit repeat
                    on error
                    end try
          end repeat
Extract the clipboard's content *)
the clipboard as text
Insert return between every characters *)
          my recolle(every character of result, return)
Fill the clipboard with the edited string *)
set the clipboard to result
Paste in the cell *)
          my raccourci("Numbers", "v", "cas")
end run
--=====
on recolle(l, d)
          local oTIDs, t
          set oTIDs to AppleScript's text item delimiters
          set AppleScript's text item delimiters to d
          set t to l as text
          set AppleScript's text item delimiters to oTIDs
          return t
end recolle
--=====
on activateGUIscripting()
(* to be sure than GUI scripting will be active *)
          tell application "System Events"
                    if not (UI elements enabled) then set (UI elements enabled) to true
          end tell
end activateGUIscripting
--=====
==== Uses GUIscripting ====
This handler may be used to 'type' text, invisible characters if the third parameter is an empty string.
It may be used to 'type' keyboard raccourcis if the third parameter describe the required modifier keys.
I changed its name « shortcut » to « raccourci » to get rid of a name conflict in Smile.
on raccourci(a, t, d)
          local k
          tell application a to activate
          tell application "System Events" to tell application process a
                    set frontmost to true
                    try
                              t * 1
                              if d is "" then
key code t
                              else if d is "c" then
key code t using {command down}
                              else if d is "a" then
key code t using {option down}
                              else if d is "k" then
key code t using {control down}
                              else if d is "s" then
key code t using {shift down}
                              else if d is in {"ac", "ca"} then
key code t using {command down, option down}
                              else if d is in {"as", "sa"} then
key code t using {shift down, option down}
                              else if d is in {"sc", "cs"} then
key code t using {command down, shift down}
                              else if d is in {"kc", "ck"} then
key code t using {command down, control down}
                              else if d is in {"ks", "sk"} then
key code t using {shift down, control down}
                              else if (d contains "c") and (d contains "s") and d contains "k" then
key code t using {command down, shift down, control down}
                              else if (d contains "c") and (d contains "s") and d contains "a" then
key code t using {command down, shift down, option down}
                              end if
                    on error
                              repeat with k in t
                                        if d is "" then
keystroke (k as text)
                                        else if d is "c" then
keystroke (k as text) using {command down}
                                        else if d is "a" then
keystroke k using {option down}
                                        else if d is "k" then
keystroke (k as text) using {control down}
                                        else if d is "s" then
keystroke k using {shift down}
                                        else if d is in {"ac", "ca"} then
keystroke (k as text) using {command down, option down}
                                        else if d is in {"as", "sa"} then
keystroke (k as text) using {shift down, option down}
                                        else if d is in {"sc", "cs"} then
keystroke (k as text) using {command down, shift down}
                                        else if d is in {"kc", "ck"} then
keystroke (k as text) using {command down, control down}
                                        else if d is in {"ks", "sk"} then
keystroke (k as text) using {shift down, control down}
                                        else if (d contains "c") and (d contains "s") and d contains "k" then
keystroke (k as text) using {command down, shift down, control down}
                                        else if (d contains "c") and (d contains "s") and d contains "a" then
keystroke (k as text) using {command down, shift down, option down}
                                        end if
                              end repeat
                    end try
          end tell
end raccourci
--=====
--[/SCRIPT]
--{code}
tip #2 :
--{code}
--[SCRIPT rotate_cell_contents]
Enregistrer le script en tant que Script : rotate_cell_contents.scpt
déplacer le fichier ainsi créé dans le dossier
<VolumeDeDémarrage>:Users:<votreCompte>:Library:Scripts:Applications:Numbers:
Il vous faudra peut-être créer le dossier Numbers et peut-être même le dossier Applications.
Sélectionner une cellule dont le texte doit être tourné de 90 degrés.
Aller au menu Scripts , choisir Numbers puis choisir “rotate_cell_contents”
--=====
L’aide du Finder explique:
L’Utilitaire AppleScript permet d’activer le Menu des scripts :
Ouvrez l’Utilitaire AppleScript situé dans le dossier Applications/AppleScript.
Cochez la case “Afficher le menu des scripts dans la barre de menus”.
Sous 10.6.x,
aller dans le panneau “Général” du dialogue Préférences de l’Éditeur Applescript
puis cocher la case “Afficher le menu des scripts dans la barre des menus”.
--=====
Save the script as a Script: rotate_cell_contents.scpt
Move the newly created file into the folder:
<startup Volume>:Users:<yourAccount>:Library:Scripts:Applications:Numbers:
Maybe you would have to create the folder Numbers and even the folder Applications by yourself.
Select a cell whose contents must be rotated for 90 degrees.
Go to the Scripts Menu, choose Numbers, then choose “rotate_cell_contents”
--=====
The Finder’s Help explains:
To make the Script menu appear:
Open the AppleScript utility located in Applications/AppleScript.
Select the “Show Script Menu in menu bar” checkbox.
Under 10.6.x,
go to the General panel of AppleScript Editor’s Preferences dialog box
and check the “Show Script menu in menu bar” option.
--=====
Yvan KOENIG (VALLAURIS, France)
2011/06/23
2011/06/26 -- No longer use an auxiliary text box. Now keep the text attributes.
2012/01/31 -- edited for Lion
--=====
on run
          local dName, sName, tName, rowNum1, colNum1, rowNum2, colNum2
          local le_texte, la_largeur, la_hauteur, myNewDoc
          my activateGUIscripting()
Extract properties of the source/target cell *)
          set {dName, sName, tName, rowNum1, colNum1, rowNum2, colNum2} to my get_SelParams()
          tell application "Numbers" to tell document dName to tell sheet sName to tell table tName
                    set selection range to range (name of column colNum1 & name of row rowNum1)
          end tell
Cut*)
          my raccourci("Numbers", "x", "c")
Trigger Preview *)
          tell application "System Events"
                    if "Preview" is not in (name of every application process) then launch application "Preview"
          end tell
delay 0.2 -- required
New document from the clipboard *)
          my raccourci("Preview", "n", "c")
Rotate to left *)
          my raccourci("Preview", "l", "c")
Copy *)
          my raccourci("Preview", "c", "c")
Quit *)
          my raccourci("Preview", "q", "c")
          (system attribute "sys2") < 7
          if result then
Click the [Don't Save] button in the warning sheet *)
                    tell application "Preview" to activate
                    tell application "System Events" to tell application process "Preview" to tell window 1
                              name of buttons
                              repeat 50 times
                                        delay 0.1
                                        if exists sheet 1 then exit repeat
                              end repeat
                              tell sheet 1 to click button 2
                    end tell
          end if
Back to Numbers *)
          tell application "Numbers" to tell document dName to tell sheet sName to tell table tName
-- just reset the focus on the table
          end tell
Paste in the cell *)
          my raccourci("Numbers", "v", "c")
end run
--=====
set { dName, sName, tName, rowNum1, colNum1, rowNum2, colNum2} to my get_SelParams()
tell application "Numbers" to tell document dName to tell sheet sName to tell table tName
on get_SelParams()
          local d_name, s_name, t_name, row_num1, col_num1, row_num2, col_num2
          tell application "Numbers" to tell document 1
                    set d_name to its name
                    set s_name to ""
                    repeat with i from 1 to the count of sheets
                              tell sheet i to set maybe to the count of (tables whose selection range is not missing value)
                              if maybe is not 0 then
                                        set s_name to name of sheet i
                                        exit repeat
                              end if -- maybe is not 0
                    end repeat
                    if s_name is "" then
                              if my parleAnglais() then
                                        error "No sheet has a selected table embedding at least one selected cell !"
                              else
                                        error "Aucune feuille ne contient une table ayant au moins une cellule sélectionnée !"
                              end if

How can I make the iPhone beep every hour ?

How can I make the iPhone beep every hour ?
Just a beep not an alarm (alarms require an acknowledgement)

I wanted this function as well and I just downloaded "BBClendar Free" and it works perfectly for this, better than an inexpensive digital watch!
Just go to the Advanced section, enable the hourly beep and even set which hours (mine is 8 AM - 10 PM) and what minute of each hour it beeps on. Just be sure to leave the program open when you go on standby or it won't beep.
As the App's description says, "Hourly Beep helps you to take a moment to rest in a busy day for every hour."
Enjoy!

How can I make the edges of the JSC component curved?

It is a very common practice to make the edges curved in web development. Curved edge looks attractive and professional. (for example see blog.com)
How can I make the edges of the JSC component curved? For example, consider Textfield component, how to make the the sharp edges smooth and curved?
Thank you very much.

Follow the steps below implement rounded edges for tabs in a tabset component:
1)Create 2 images: level1_selected.jp and level1_deselct.jpg to be used as the background for these tabs. Thse images can be easily craeted using windows paint software. Just ceate a rectangular image of size 200X30 and draw a rounded rectangle on it.
2) Redefine the following styles in your application stylesheet(originally defined in css_master.css)
.Tab1Div td.Tab1TblSelTd {
     background-color:#EDF5F8;width: 200px;height:40px;background-image:url(images/level1_selected.jpg)
.Tab1Div td.Tab1TblSelTd {
     background-repeat:repeat-x;background-position:left bottom;border-bottom:none
.Tab1Div td {
     background-color:#EFEBEF;width: 200px;height:40px;background-image:url(images/level1_deselect.jpg);border:none
.Tab1Div td {
     background-repeat:repeat-x;background-position:bottom left
a.Tab1Lnk:link, a.Tab1Lnk:visited {
     display:block;padding:8px 15px 0px;font-weight:bold;text-align:center
Results: By doing this you'll have the selected and unselected tabs show up with rounded egdes and also the selected tab will look bigger than the unselected tas making it more prominent.

How Can I make the following query faster

Hi Guru
I want your valuable suggestion to make the following query faster.I did not write all required columns list. I gave here all those columns where I have conditon like decode,case when,or subquery
(SELECT CASE WHEN REPORTED_BY IS NULL THEN
          (SELECT INITCAP(EMP_NAME) FROM HR_EMP WHERE EMP_NO = M.EMP_NO_RADIO)
     ELSE (SELECT INITCAP(EMP_NAME) FROM HR_EMP WHERE EMP_NO = M.REPORTED_BY) END RADIOLOGIST_NAME,
     (SELECT TEAM_NAME FROM DC_TECHTEAMMST WHERE TEAM_NO = M.GROUP_NO) GROUP_NAME,
     CASE WHEN M.RESULT_ENTRY_LOCK_BY IS NOT NULL THEN 'R'
WHEN M.REPORT_DONE = 'D' THEN 'D'
WHEN M.REPORT_DONE = 'P' THEN 'P'
WHEN M.REPORT_DONE = 'F' THEN 'F'
     WHEN NVL(M.IMG_CAPTURED,'X') NOT IN ('B','Y') OR M.QA_RESULT = 'F' THEN 'S'
WHEN NVL(M.IMG_CAPTURED,'X') IN ('B','Y') AND NVL(M.QA_RESULT,'X') NOT IN ('B','P') THEN 'Q'
     wHEN NVL(M.IMG_CAPTURED,'X') IN ('B','Y') AND NVL(M.QA_RESULT,'X') IN ('B','P') THEN 'C'
END STATUS,
     (SELECT DECODE(NVL(V.DELIVERY_STATUS,'N'),'E',3,'U',2,1)
          FROM FN_VOUCHERCHD V WHERE V.VOUCHER_NO = M.VOUCHER_NO AND V.ITEM_NO = M.TEST_NO) DELIVERY_STATUS,
     trunc((start_time-order_end)*24,0)||' hr'||':'||
     decode(length(trunc(to_char(MOD((M.start_time-M.order_end)*24,1)*60),0)),2,to_char(trunc(to_char(MOD((M.start_time-M.order_end)*24,1)*60),0))
          ,1,to_char('0'||trunc(to_char(MOD((M.start_time-M.order_end)*24,1)*60),0)))||' mi' duration_order_capture,
     DECODE(R.CONFIDENTIAL_PATIENT,'Y','*',NVL(R.NAME,R.name_lang_name||' '||R.name_lang_fname)) PAT_NAME,
     FNC_PATIENTAGE(R.REG_NO,'',R.CONFIDENTIAL_PATIENT) pat_age,
     DECODE(R.CONFIDENTIAL_PATIENT,'Y','*',R.PATIENT_SEX) PAT_SEX
FROM DC_MODALITYAPPOINTMENT M,DC_TESTMST T,OP_REGISTRATION R
WHERE M.ACCESSION_NO IS NOT NULL AND NVL(M.CANCEL_FLAG,'N') = 'N'
AND (NVL(T.SP_GEN,'S') = 'S' OR NVL(M.DOC_REQ_GEN,'N') = 'Y')
AND M.TEST_NO IS NOT NULL AND M.TEST_NO = T.TEST_NO AND M.REG_NO = R.REG_NO)
How can I make the above query faster.
Query condition or indexing whatever is preferable please guide me.
The approximate data of tables
DC_MODALITYAPPOINTMENT 2,000,000
A lot of updating is going on some columns of this table.all columns are not in the select list, Insertion is happend in batch process by back-end trigger of another table.
Primary key based one column,
OP_REGISTRATION 500,000
Daily insertion on this table around 500 records,updation is not much.
Primary key based one column 'reg_no'
DC_TESTMST
Total records of this table not more than 1500.This is setup table. Insertion and updation is not much on this table also
I have to create a view based on this query .
and I have to create another view to serve another purpose.
In the 2nd view I need this query as well as I need another query by using union all operator based on a table(dc_oldresult)
which have 1,600,000 records.There is no DML on this table
SELECT      NVL((SELECT USER_DEFINE_TEST_NO FROM DC_TESTMST WHERE TEST_NO = SV_ID AND ROWNUM = 1 ),SV_ID) USER_D_EXAM_NO,
(SELECT TEST_TYPE FROM DC_TESTMST WHERE TEST_NO = SV_ID AND ROWNUM = 1 ) EXAM_TYPE,
     NVL((SELECT TEST_NAME FROM DC_TESTMST WHERE TEST_NO = SV_ID AND ROWNUM = 1),'Exam Code: '||sv_id) EXAM_NAME,
     (SELECT PAT_NAME FROM OP_REGISTRATION WHERE REG_NO = HN) PATIENT_NAME,
     (SELECT PAT_AGE FROM OP_REGISTRATION WHERE REG_NO = HN) PATIENT_AGE,
     (SELECT PAT_SEX FROM OP_REGISTRATION WHERE REG_NO = HN) PATIENT_GENDER
FROM DC_OLDRESULT
WHERE HN IS NOT NULL AND SV_ID IS NOT NULL AND UPPER(ACTIVE) = 'TRUE'
Should I make join DC_OLDRESULT, OP_REGISTRATION and DC_TESTMST? or The eixisting subquery is better?
I use OP_REGISTRATION and DC_TESTMST in both query
Thanks in advance
Mokarem

When your query takes too long ...

How can I make the X axis temporally proportional?

I have a very simple line chart with decimal values on the Y axis and dates on the X axis. The dates are one per row in my source spreadsheet but they are not "evenly spaced". How can I make the chart reflect linear time, plotting the date categories irregulary along a smooth timeline?

Look forward to the real experts' comments on chart overlays.
As for date-format for X-axis it took some fiddling for me (sometimes it was greyed out) but it does work.
Either leave it as Same as Source Data or pick Date and Time and choose one of the many formats available, some shorter than the source data format.
I haven't figured out how to make specific dates show up on the axis, e.g. in my example it would be nicer to show mid-month and/or month-end dates. Numbers seems to split into intervals based on the number of Steps, with little (no?) control over where intervals begin/end.

I down loaded sygic on my iPhone 3s but the icon is missing even in the search but when I want to download it again ,it say this application is present, how can I make the icon to show up

I down loaded sygic on my iPhone 3s but the icon is missing even in the search but when I want to download it again ,it say this application is present, how can I make the icon to show up

- Have you tried a reset. Nothing is lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Try syncing the iPod to your computer. Then delete from iTunes and sync. that should delete it from the iPod. Then redownload it.

I am frustrated with how my cursor jumps around while typing. How can I make the arrow follow the cursor so this doesn't happen?

Macbook Pro with OSX Yosemite: I am frustrated that when using Word for Mac, the cursor keeps jumping around all over the page. How can I make the pointer follow the cursor so this stops?

Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
* Don't make any changes on the Safe mode start window.
See:
* [[Troubleshooting extensions and themes]]

How can I make the combo box turn to the value of black.

When the show button is pressed (and not before), a filled black square should be
displayed in the display area. The combo box (or drop down list) that enables the user to choose the colour of
the displayed shape and the altering should take effect immediately.When the show button is pressed,
the image should immediately revert to the black square, the combo box should show the value that
correspond to the black.
Now ,the problem is: after I pressed show button, the image is reverted to the black square,but I don't know
how can I make the combo box turn to the value of black.
Any help or hint?Thanks a lot!
coding 1.
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
import javax.swing.event.*;
public class test extends JFrame {
     private JPanel buttonPanel;
     private DrawPanel myPanel;
     private JButton showButton;
     private JComboBox colorComboBox;
private boolean isShow;
     private int shape;
     private boolean isFill=true;
private String colorNames[] = {"black", "blue", "cyan", "darkGray", "gray",
"green", "lightgray", "magenta", "orange",
"pink", "red", "white", "yellow"}; // color names list in ComboBox
private Color colors[] = {Color.black, Color.blue, Color.cyan, Color.darkGray,
                          Color.gray, Color.green, Color.lightGray, Color.magenta,
                          Color.orange, Color.pink, Color.red, Color.white, Color.yellow};
     public test() {
     super("Draw Shapes");
     // creat custom drawing panel
myPanel = new DrawPanel(); // instantiate a DrawPanel object
myPanel.setBackground(Color.white);
     // set up showButton
// register an event handler for showButton's ActionEvent
showButton = new JButton ("show");
     showButton.addActionListener(
          // anonymous inner class to handle showButton events
     new ActionListener() {
               // draw a black filled square shape after clicking showButton
     public void actionPerformed (ActionEvent event) {
                         // call DrawPanel method setShowStatus and pass an parameter
          // to decide if show the shape
     myPanel.setShowStatus(true);
               isShow = myPanel.getShowStatus();
                                        shape = DrawPanel.SQUARE;
                    // call DrawPanel method setShape to indicate shape to draw
                                        myPanel.setShape(shape);
                    // call DrawPanel method setFill to indicate to draw a filled shape
                                        myPanel.setFill(true);
                    // call DrawPanel method draw
                                        myPanel.draw();
                         myPanel.setFill(true);
                         myPanel.setForeground(Color.black);
               }// end anonymous inner class
     );// end call to addActionListener
// set up colorComboBox
// register event handlers for colorComboBox's ItemEvent
colorComboBox = new JComboBox(colorNames);
colorComboBox.setMaximumRowCount(5);
colorComboBox.addItemListener(
     // anonymous inner class to handle colorComboBox events
     new ItemListener() {
     // select shape's color
     public void itemStateChanged(ItemEvent event) {
     if(event.getStateChange() == ItemEvent.SELECTED)
     // call DrawPanel method setForeground
     // and pass an element value of colors array
     myPanel.setForeground(colors[colorComboBox.getSelectedIndex()]);
myPanel.draw();
}// end anonymous inner class
); // end call to addItemListener
// set up panel containing buttons
     buttonPanel = new JPanel();
buttonPanel.setLayout(new GridLayout(4, 1, 0, 50));
     buttonPanel.add(showButton);
buttonPanel.add(colorComboBox);
JPanel radioButtonPanel = new JPanel();
radioButtonPanel.setLayout(new GridLayout(2, 1, 0, 20));
Container container = getContentPane();
container.setLayout(new BorderLayout(10,10));
container.add(myPanel, BorderLayout.CENTER);
     container.add(buttonPanel, BorderLayout.EAST);
setSize(500, 400);
     setVisible(true);
     public static void main(String args[]) {
     test application = new test();
     application.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
coding 2
import java.awt.*;
import javax.swing.*;
public class DrawPanel extends JPanel {
     public final static int CIRCLE = 1, SQUARE = 2;
     private int shape;
     private boolean fill;
     private boolean showStatus;
private int shapeSize = 100;
private Color foreground;
     // draw a specified shape
public void paintComponent (Graphics g){
          super.paintComponent(g);
          // find center
int x=(getSize().width-shapeSize)/2;
          int y=(getSize().height-shapeSize)/2;
          if (shape == CIRCLE) {
     if (fill == true){
     g.setColor(foreground);
          g.fillOval(x, y, shapeSize, shapeSize);
else{
               g.setColor(foreground);
g.drawOval(x, y, shapeSize, shapeSize);
          else if (shape == SQUARE){
     if (fill == true){
     g.setColor(foreground);
                    g.fillRect(x, y, shapeSize, shapeSize);
else{
                    g.setColor(foreground);
g.drawRect(x, y, shapeSize, shapeSize);
// set showStatus value
public void setShowStatus (boolean s) {
          showStatus = s;
     // return showstatus value
public boolean getShowStatus () {
          return showStatus;
     // set fill value
public void setFill(boolean isFill) {
          fill = isFill;
     // set shape value
public void setShape(int shapeToDraw) {
          shape = shapeToDraw;
// set shapeSize value
public void setShapeSize(int newShapeSize) {
          shapeSize = newShapeSize;
// set foreground value
public void setForeground(Color newColor) {
          foreground = newColor;
     // repaint DrawPanel
public void draw (){
          if(showStatus == true)
          repaint();

Hello,
does setSelectedIndex(int anIndex)
do what you need?
See Java Doc for JComboBox.

How can I make the background one solid color? It is too difficult and noticeable when I use the retouch button and try to erase all the creases in my backdrop. So, how can I have just a solid white background?

How can I make the background one solid color? It is too difficult and noticeable when I use the retouch button and try to erase all the creases in my backdrop. So, how can I have just a solid white background?

When talking about a specific image posting the image may be useful.
One can use a Layer Mask and add a white Layer underneath.

How can I make the text bigger in iCal?

How can I make the text bigger in iCal? I've looked at Preferences and View.

Sorry, did not see that you are using 10.6.7

How can i make the sound louder than it already is?

Similar Messages

Maybe you are looking for