How can I make the Time Capsule Icon stay on my desktop?

I just replaced my old Airport Extreme and aging external drive with a new Airport TC.  The upgrade coulen't have been easier. Here's my question.  I occasionally want to access the TC as in external drive so I would like the TC icon to appear on my desktop all the time rather than appearing only when the Time machine is running.  Is there a way to do this?  I'm running all the latest software / firmware. Thanks and I know there have been some similar threads but they were pretty old.

Open System Preferences (gear icon on the dock)
Open Users & Groups
Click the Login Items tab (next to the Password tab)
Click the + buttton at the bottom of the list
Use the Finder interface to locatet the Time Capsule drive and open it on the desktop
Click Add
Now the Time Capsule drive....named "Data", unless you have renamed it, will mounta and appear on the desktop when your Mac starts up.

Similar Messages

  • When putting an event on my iPhone calendar and the time, when it goes to iCloud to my laptop or iPad calendar the times are different.  How can I make the time the same?

    When putting an event and the time on my iPhone calendar, when it goes to iCloud to my laptop or iPad calendar the times are different.  How can I make the time the same?

    Welcome to the Apple Community.
    Is the calendar you are adding events to on the phone an iCloud calendar.

  • How can I add the Time Capsule to my Netgear Nighthawk R7000's Network?

    I Want to connect my Time Capsule To My Nighthawk and still have access to the rest of my networt. How do I do it?

    Thanks for confirming that for me.
    If the Time Capsule has not ever been set up, then it is still in its factory default settings and you can proceed with the setup.
    Connect the Ethernet cable from one of the LAN <--> ports on your Netgear router to the WAN "O" port on the Time Capsule
    Power up the Time Capsule for a minute or two. The light will be slowly blinking amber at this time.
    Click the WiFi icon on the menu bar at the top of the Mac's screen
    Look for a setting of New AirPort Base Station
    Click on Time Capsule just below that
    The example below shows an AirPort Extreme. You will see Time Capsule on your screen.
    The setup utility will open up and take 15-20 seconds to analyze the network, then a screen similar to this will appear, except you will see a Time Capsule icon:
    Network Name........Type in the name of the network that you want to use.  If you want the Time Capsule to "extend" the Netgear network, type in same wireless network name that the Netgear router is using.
    Base Station Name......Type is a simple name for the Time Capsule.  Mine is TC, for example.
    Password........Type in the password that you want to use for the network.  If you use the same wireless network name as the Netgear, then you would type in the wireless password for the Netgear network here
    Verify the password that you entered
    Click Next......and the utility will set up everything for you.  When you see the message of setup complete, click Done.
    That's it.

  • How can I search the time capsule using spotlight or time machine?

    Every time I try to use spotlight in finder, to find anything on the time capsule, spotlight automatically turns to the mac.
    While using timemachine the connection to the time machine greys out.
    How can I use these options, or different options to search the time capsule?

    I've been looking for the star wars gui, but I only ended up watching scifi movies all night.
    LOL..
    Oh well it is new year.. seems as good a use of time as any.
    Click on the time machine icon in the dock.. that opens finder inside the backup.
    http://www.dummies.com/how-to/content/using-time-machine-to-find-old-files-on-yo ur-mac.html

  • HT1178 How can I access the Time Capsule HD from my PC?

    Hi,
    I bought the Time Capsule because I thought it was a easy way of creating a small home network with a shared HD and printer. The wireless setup was easy but everything else doesn't seem that straight forward. I soon found out that I could not just plug my USB printer. You actually need a WPS printer which was not clear in the product description. Anyhow, just need a new printer.
    The main issue for me is being able to share files between my devices (Apple and non-Apple) as well as share the HD. I cannot find a way of configuring my PC or TC so that I can access the TC HD from my PC. Has anyone been able to configure that?
    Thanks

    You can plug a printer in via USB.. but not all printers work.. nor does airprint . but that has nothing to do with the Apple router.. that is how apple designed iOS.
    What printer do you have?
    Getting USB printer working can be tricky because by its nature you are networking a printer designed for local connection.. not networking.
    To share printers and file sharing load the airport utility for windows into the windows computer.. that includes bonjour for windows which is helpful for sharing of apple network devices.. and there is a disk agent.
    That might get you in without anything else.
    No luck remember windows does not work well with the names apple uses by default.. make sure all names on the TC conform with windows networking.. ie short, no spaces and pure alphanumeric.
    In windows explorer address bar type
    \\TCname or \\TCIPaddress (where clearly you replace the TCname with actual name or the TCIPaddress with the actual IP address).
    If that still fails... then you have firewall issues.. turn off all firewalls in the PC .. there can be several running.
    And make sure the PC is set to home as location . .not office or public.

  • How can I make sure time capsule is working?

    How can I check time capsule to make sure it is backing up?

    Suppose time capsule is working and I delete some pictures. Will I just need to remember what date I deleted pictures and just keep that date in mind to know pictures from a certain time only live on the time capsule?
    This is a very good way to lose your images. 
    Time Machine keeps track of the changes on your Mac. If you delete files on your Mac, Time Machine will "backup" that change....and at some point it will delete the files from the Time Capsule......you just don't know when this might occur.
    It might occur within the next day or so, or at some point in the future. You cannot predict this.
    But, even if the files stay on the Time Capsule for a few weeks......these are your only copies of your images. You have no backups in the event of a problem with the Time Capsule.

  • How can I access the time capsule hard drive via ethernet?

    I recently bought a new laptop, as my old one was sadly stolen. I'm trying to connect to my backed up time capsule hard drive via ethernet to retrieve my files, but it doesn't seem to work. Oddly enough I have no issues over wifi. When I switch from wifi to ethernet, it gives me an error message stating that the disk was not found in the network. I have a MacBook Air with an ethernet adapter if that makes any difference. I'm also running the latest OS X and firmware. Wifi is simply too slow for this restoration process, so any suggestions?
    Could I possibly connect via USB? What kind of cable would that require? Is the ethernet issue a problem with my settings?
    Help greatly appreciated

    manzalawy7 wrote:
    I'm trying to connect to my backed up time capsule hard drive via ethernet to retrieve my files, but it doesn't seem to work.
    In the Network panel of System Preferences do you have an Ethernet connection item on the left? If not, authenticate if necessary by clicking on the lock, then click the plus sign at the bottom of that column and add an Ethernet item.
    When I switch from wifi to ethernet, it gives me an error message stating that the disk was not found in the network.
    How are you doing that switching? When you switch to Ethernet do you have connectivity to the Internet? If not, do you see a tiny green light on the Time Capsule next to the Ethernet socket you're using?
    Could I possibly connect via USB?
    No.

  • How can i get the time capsule to use my mac's mac address

    on some wireless routers you can get the router to use the mac address of a client connected to it instead of it's own.
    Can i do that on the time capsule?

    Sorry, but no. You cannot change (spoof) the MAC address on any of the AirPort/Time Capsule routers.

  • How can I use the Time Capsule in only 802.11b/g?

    I think I am getting interferences on my 5GHz phone from the time capsule, which I have running in 802.11n mode with b/g compatitibility. I assume if the Time Capsule was running in 802.11b/g mode I would not get the intereferences?
    The Airport utility does not seem to have a setting to use the Time Capsule in 802.11b/g only. Is there a way to accomplish this?
    Message was edited by: Karl R.

    Duane wrote:
    Then the Time Capsule's 5 GHz network should not interfere with the phone since it operates a long way from the phone's frequency.
    Not necessarily. In the US 802.11n channels appear to go up to at least 5.805 GHz, if I interpret this chart
    http://www.networkdictionary.com/Wireless/Wi-Fi-Wireless-LAN-Frequency.php
    correctly.
    It would seem that the best way to avoid interference with 5.8 GHz cordless phones is to avoid channels above 153.

  • How can I have the Time Machine animated wallpaper as my desktop background?

    I really love the animated stars when you go in the time machine app. Is there a way to have this as your desktop background?
    I've found and tested a few apps that do this (animated desktop pictures), but I really want the time machine animation.
    I've also found an app that lets you use the old time machine animated picture, but I don't even nearly like it as much as the new one.
    If anyone knows... please tell me

    Open System Preferences (gear icon on the dock)
    Open Users & Groups
    Click the Login Items tab (next to the Password tab)
    Click the + buttton at the bottom of the list
    Use the Finder interface to locatet the Time Capsule drive and open it on the desktop
    Click Add
    Now the Time Capsule drive....named "Data", unless you have renamed it, will mounta and appear on the desktop when your Mac starts up.

  • How can I change the time that fullscreen stays on?

    When I am watching Netflix, the fullscreen goes back to normal mode after roughly 10 minutes. How can I change the setting so the fullscreen stays on until I turn it off?

    see:
    [[How to make Firefox and websites go full screen|How to make Firefox and websites go full screen]]
    [[Reset Firefox preferences to troubleshoot and fix problems|Reset Firefox preferences to troubleshoot and fix problems]]

  • How can I increase the time deleted emails stay in the trash folder?

    Sometimes I find that I need to refer back to an email that was deleted. Right now the emails are dumped from the trash folder very quickly. I would like to let the deleted emails stay in the trash folder for a much longer period of time.

    Is this on Comcast email? Another email site?
    Usually this is set in the options for the site, and not in Firefox itself.
    If you are retrieving mail into the Thunderbird email program, there actually is a different support forum for Thunderbird here: https://support.mozillamessaging.com/home

  • I down loaded sygic on my iPhone 3s but the icon is missing even in the search but when I want to download it again ,it say this application is present, how can I make the icon to show up

    I down loaded sygic on my iPhone 3s but the icon is missing even in the search but when I want to download it again ,it say this application is present, how can I make the icon to show up

    - Have you tried a reset. Nothing is lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Try syncing  the iPod to your computer. Then delete from iTunes and sync. that should delete it from the iPod. Then redownload it.

  • HT1364 I have moved my library to an external hard drive and changed the location of the iTunes media folder in Preferences, but every time I close and re-open iTunes, I have to do it all over again.  How can I make the iTunes media folder change permanen

    I have moved my library to an external hard drive and changed the location of the iTunes media folder in Preferences, but every time I close and re-open iTunes, I have to do it all over again.  How can I make the iTunes media folder change permanent?  I have an older machine with Windows XP.

    I don't believe mounting the hard drive should be necessary, unless you have several external drives and want your computer to recognise them as folders, rather than drives. I've never had to mount a hard drive, ever. If you don't know how to do it, then it shouldn't be necessary now.
    Try this:
    Prepare iTunes so that it can see the external drive.
    Make a note of which drive-letter the external drive has been allocated. (Look in Windows Exploer)
    Look at the file location for a song. Make sure it plays (and therefore that iTunes has found it). Highlight it and select File/Get Info/Summary>Where: and make a note of the drive letter for that song.
    Close and shut down the computer.
    The next time you turn the computer on again, connect the external drive
    Before you start iTunes - check the external drive in Windows Explorer. Is it ready, does it have the same drive-letter that it had last time? Can you go into the drive and see the files on it?
    Once you can, start iTunes. (If the drive lettter has changed, you need to work out why before going any further.)
    If iTunes fails to find your external drive, you need to check where iTunes is looking for your Library.
    Select the same song you checked before (presumably iTunes can no longer find it). Follow the procedure for locating it. You should be able to see where iTunes thinks the file is. It's the drive that counts. Which drive letter is iTunes looking at? Is it the same one that it was previously (which should also be the same one that the drive has now).
    What happens, which step do you have problems with?
    Message was edited by: the fiend

  • I have just installed a 2TB time capsule on my iMac i7, it see my second 1TB hard drive but the 256 SSD doesn't come up in the list of hard drives I can back up. How can I enable the time machine to see my first SSD 256gb hard drive?

    I have just installed a 2TB time capsule on my iMac i7, it see my second 1TB hard drive but the 256 SSD doesn't come up in the list of hard drives I can back up. How can I enable the time machine to see my first SSD 256gb hard drive?

    iLife is preinstalled on all the Macs. If you purchased iLife in the App Store or your computer came without DVDs, open App Store > Purchases and download the applications. If your Mac came with discs, insert the Applications DVD and install iLife applications

Maybe you are looking for

  • How do I setup home sharing on my new ipad

    How do I setup home sharing on my Ipad ? I just installed an Apple TV and want to display content. Thanks

  • Tranfer music from one account to another?

    I use my moms itunes account to get my music but i use my account to get songs i want that my mom wouldnt want and to get apps.. im planning on replacing my phone with the kind but was wondering if i could tranferred the music i got from my mom to my

  • Checking for month boundaries given a date

    Hello everyone, Given a date, I have to check whether a date is the 1st or last in the month, I have some views of doing it ,but looking for the best and efficient method to start with. Replies are greatly apprecaited. Thanks, Greeshma.

  • Help - Multiple errors occurred on the server while processing commands

    I am trying to start ical server on a fresh install of os x server 10.5, but I receive the following error messages: "Multiple errors occurred on the server while processing commands. Use the console application to view the error message" then I hit

  • Javascript event handling

    The following code is being executed three times in the following sequence: 1) On initialization of my Flex application, initCallback() is called 2) When I broadcast a 'getUserPreferencesFromCookie' event, handleGetUserPreferenceCookie() is called. 3