How can i make the volume controller on a pavillion dv4 work after a clean windows install?
Hello!
Recently I performed a clean windows 7 install from a windows install disk I previously owned, the problem is that this disk didn't intalled the drivers and programs specific for this computer. What I want to know is which driver or program I need to install to make the volume controller on my computer to work again? The problem is that the volume bar that previously appeared on the screen and the "bing" sound indicating the volume level doesn't appear or sound now.
All other things seem to work fine, this is the only problem so far.
Thanks!
Hi,
Try downloading and installing the latest HP OSD Utility on the following link.
http://ftp.hp.com/pub/softpaq/sp55001-55500/sp55152.exe
After the installation has completed, restart the notebook.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience
Similar Messages
-
I would like to TOTALLY silence my iPod. I turn the volume all the way down using the buttons on the side, but this just silences alerts and system sound effects. Then I start a game, and the game sounds still play. Of course I can turn the volume down after the game starts, but by then I'm already busted :-)
I don't know if it's related, but...
I can plug in my headphones and then turn the game volume all the way down. But when I remove the headphones, the volume goes back up again.First
Forgotten Security Questions/Answers
You need to contact Apple by:
1 - Use the Express lane and start here:
https://expresslane.apple.com
then click More Products and Services>Apple ID>Other Apple ID Topics>Forgotten Apple ID security questions.
or
Apple - Support -form iTunes Store - Contact Us
2 - Call Apple in your country by getting the number from here:
http://support.apple.com/kb/HE57
or
Apple ID: Contacting Apple for help with Apple ID account security
3 - Use your rescue email address if you set one up
Rescue email address and how to reset Apple ID security questions
For general information see:
Apple ID: All about Apple ID security questions
Then edit your account to add a valid email address
How do I change my Apple ID Name or personal information?
You can change your Apple ID Name at My Apple ID. Click on Manage your Apple ID and sign in with your Apple ID name and password. Click Edit and enter the new information, then click Save Changes. Changes take effect immediately. You can also use My Apple ID to change your personal information, such as your mailing address or email address. See Changing the name you use for your Apple ID if you'd like more information. -
How can I make the return receipt and deliver status notification work ?y
I have checked marked "return receipt" and "delivery status notification" when doing emails.
Doesn't seem to be working.
Please helpare they not working, or has the recipient simply declined to send them? That is the real question. Sending mail to yourself rarely triggers the return receipt
-
How can i increase the volume of 6plus when make phonecalls
How can I increase the volume when I make the phonecalls. I already tried the normal method like press the slide volume button but it doesn't work.Is there any other methods to solve the problem?
Did you try that while on a phone call? Also there are different volumes for different devices. If you have your earbuds in and set a volume that will change the volume for when your earbuds are in. If you have a bluetooth headset you can set a volume for that.
-
How can I convert the volume directory into a single file installer?
How can I convert the volume directory into a single file installer? I would like to hide all the miscillaneous files that I don't care for and be able to have the installer double click a single file and have it automatically install.
On the second prompt screen when prompted 'What kind of self-extracting Zip file file do you want to make?'
Are you choosing the second option (self-extracting Zip file for software installation)?
I have a word file that I created to help me remember - is there anyway to email it to you? -
Hi
I have my iPhone 4s plugged into a dock and the dock connected to an amplifier with 2 speakers and a bass, the problem is that the amplifier doesn't have a volume changer and when i plug in the iPhone into the dock the iPhone´s volume bar disappears and im not allowed to change the volume and its very loud. how can i change the volume? is there an app? any ideas??(my dock doesnt have infrared remote controller )
TY!!!!Kline25 wrote:
So even if I just ask to pay them to replace the lock button they won't because my screens are third-party?
Apple does not repair devices beyond replacing the screen on some models or a battery replacement. They replace the ENTIRE device.
For the Out of Warranty replacement cost, you could have gotten a fully functional replacement device. Instead you chose to spend less to get only the screen replaced and continue to live with additional issues.
Apple will not touch the device now. They will know that it was opened elsewhere and that the replacement screen is not original. -
How can i make the text go vertically in numbers
How can I make the text vertical in numbers? I have merged the cells and cannot find an option for making it go vertical as opposed to horizontal.
I already gave two tools to fit this kind of needs.
tip #1 :
--{code}
--[SCRIPT write_vertically]
Enregistrer le script en tant que Script : write_vertically.scpt
déplacer le fichier ainsi créé dans le dossier
<VolumeDeDémarrage>:Utilisateurs:<votreCompte>:Bibliothèque:Scripts:Applications :Numbers:
Il vous faudra peut-être créer le dossier Numbers et peut-être même le dossier Applications.
Saisir dans une cellule le mot à écrire verticalement puis le sélectionner.
ATTENTION, il ne faut pas sélectionner la cellule mais le mot qui doit apparaitre surligné.
Aller au menu Scripts , choisir Numbers puis choisir “write_vertically”
Le script colle dans la cellule le mot apès avoir inséré un return entre tous les caractères.
Pour mon usage personnel j'associe un raccourci à ce script grace à FastScripts.
--=====
L’aide du Finder explique:
L’Utilitaire AppleScript permet d’activer le Menu des scripts :
Ouvrez l’Utilitaire AppleScript situé dans le dossier Applications/AppleScript.
Cochez la case “Afficher le menu des scripts dans la barre de menus”.
Sous 10.6.x,
aller dans le panneau “Général” du dialogue Préférences de l’Éditeur Applescript
puis cocher la case “Afficher le menu des scripts dans la barre des menus”.
--=====
Save the script as a Script: write_vertically.scpt
Move the newly created file into the folder:
<startup Volume>:Users:<yourAccount>:Library:Scripts:Applications:Numbers:
Maybe you would have to create the folder Numbers and even the folder Applications by yourself.
In a cell, type a word to write vertically then select it.
CAUTION, don’t select the cell but the word which must be highlighted.
Go to the Scripts Menu, choose Numbers, then choose “write_vertically”
The script insert in the cell the word after inserting a return between every characters.
For my own use, I link a shortcut to the script thank to FastScripts.
--=====
The Finder’s Help explains:
To make the Script menu appear:
Open the AppleScript utility located in Applications/AppleScript.
Select the “Show Script Menu in menu bar” checkbox.
Under 10.6.x,
go to the General panel of AppleScript Editor’s Preferences dialog box
and check the “Show Script menu in menu bar” option.
--=====
Yvan KOENIG (VALLAURIS, France)
2011/12/17
2012/01/01 no longer use a local variable, use result
--=====
on run
Clear the clipboard *)
set the clipboard to ""
Copy the selection in the clipboard *)
my raccourci("Numbers", "c", "c")
Loop waiting that the clipboard is really filled *)
repeat
try
if (the clipboard as text) is not "" then exit repeat
on error
end try
end repeat
Extract the clipboard's content *)
the clipboard as text
Insert return between every characters *)
my recolle(every character of result, return)
Fill the clipboard with the edited string *)
set the clipboard to result
Paste in the cell *)
my raccourci("Numbers", "v", "cas")
end run
--=====
on recolle(l, d)
local oTIDs, t
set oTIDs to AppleScript's text item delimiters
set AppleScript's text item delimiters to d
set t to l as text
set AppleScript's text item delimiters to oTIDs
return t
end recolle
--=====
on activateGUIscripting()
(* to be sure than GUI scripting will be active *)
tell application "System Events"
if not (UI elements enabled) then set (UI elements enabled) to true
end tell
end activateGUIscripting
--=====
==== Uses GUIscripting ====
This handler may be used to 'type' text, invisible characters if the third parameter is an empty string.
It may be used to 'type' keyboard raccourcis if the third parameter describe the required modifier keys.
I changed its name « shortcut » to « raccourci » to get rid of a name conflict in Smile.
on raccourci(a, t, d)
local k
tell application a to activate
tell application "System Events" to tell application process a
set frontmost to true
try
t * 1
if d is "" then
key code t
else if d is "c" then
key code t using {command down}
else if d is "a" then
key code t using {option down}
else if d is "k" then
key code t using {control down}
else if d is "s" then
key code t using {shift down}
else if d is in {"ac", "ca"} then
key code t using {command down, option down}
else if d is in {"as", "sa"} then
key code t using {shift down, option down}
else if d is in {"sc", "cs"} then
key code t using {command down, shift down}
else if d is in {"kc", "ck"} then
key code t using {command down, control down}
else if d is in {"ks", "sk"} then
key code t using {shift down, control down}
else if (d contains "c") and (d contains "s") and d contains "k" then
key code t using {command down, shift down, control down}
else if (d contains "c") and (d contains "s") and d contains "a" then
key code t using {command down, shift down, option down}
end if
on error
repeat with k in t
if d is "" then
keystroke (k as text)
else if d is "c" then
keystroke (k as text) using {command down}
else if d is "a" then
keystroke k using {option down}
else if d is "k" then
keystroke (k as text) using {control down}
else if d is "s" then
keystroke k using {shift down}
else if d is in {"ac", "ca"} then
keystroke (k as text) using {command down, option down}
else if d is in {"as", "sa"} then
keystroke (k as text) using {shift down, option down}
else if d is in {"sc", "cs"} then
keystroke (k as text) using {command down, shift down}
else if d is in {"kc", "ck"} then
keystroke (k as text) using {command down, control down}
else if d is in {"ks", "sk"} then
keystroke (k as text) using {shift down, control down}
else if (d contains "c") and (d contains "s") and d contains "k" then
keystroke (k as text) using {command down, shift down, control down}
else if (d contains "c") and (d contains "s") and d contains "a" then
keystroke (k as text) using {command down, shift down, option down}
end if
end repeat
end try
end tell
end raccourci
--=====
--[/SCRIPT]
--{code}
tip #2 :
--{code}
--[SCRIPT rotate_cell_contents]
Enregistrer le script en tant que Script : rotate_cell_contents.scpt
déplacer le fichier ainsi créé dans le dossier
<VolumeDeDémarrage>:Users:<votreCompte>:Library:Scripts:Applications:Numbers:
Il vous faudra peut-être créer le dossier Numbers et peut-être même le dossier Applications.
Sélectionner une cellule dont le texte doit être tourné de 90 degrés.
Aller au menu Scripts , choisir Numbers puis choisir “rotate_cell_contents”
--=====
L’aide du Finder explique:
L’Utilitaire AppleScript permet d’activer le Menu des scripts :
Ouvrez l’Utilitaire AppleScript situé dans le dossier Applications/AppleScript.
Cochez la case “Afficher le menu des scripts dans la barre de menus”.
Sous 10.6.x,
aller dans le panneau “Général” du dialogue Préférences de l’Éditeur Applescript
puis cocher la case “Afficher le menu des scripts dans la barre des menus”.
--=====
Save the script as a Script: rotate_cell_contents.scpt
Move the newly created file into the folder:
<startup Volume>:Users:<yourAccount>:Library:Scripts:Applications:Numbers:
Maybe you would have to create the folder Numbers and even the folder Applications by yourself.
Select a cell whose contents must be rotated for 90 degrees.
Go to the Scripts Menu, choose Numbers, then choose “rotate_cell_contents”
--=====
The Finder’s Help explains:
To make the Script menu appear:
Open the AppleScript utility located in Applications/AppleScript.
Select the “Show Script Menu in menu bar” checkbox.
Under 10.6.x,
go to the General panel of AppleScript Editor’s Preferences dialog box
and check the “Show Script menu in menu bar” option.
--=====
Yvan KOENIG (VALLAURIS, France)
2011/06/23
2011/06/26 -- No longer use an auxiliary text box. Now keep the text attributes.
2012/01/31 -- edited for Lion
--=====
on run
local dName, sName, tName, rowNum1, colNum1, rowNum2, colNum2
local le_texte, la_largeur, la_hauteur, myNewDoc
my activateGUIscripting()
Extract properties of the source/target cell *)
set {dName, sName, tName, rowNum1, colNum1, rowNum2, colNum2} to my get_SelParams()
tell application "Numbers" to tell document dName to tell sheet sName to tell table tName
set selection range to range (name of column colNum1 & name of row rowNum1)
end tell
Cut*)
my raccourci("Numbers", "x", "c")
Trigger Preview *)
tell application "System Events"
if "Preview" is not in (name of every application process) then launch application "Preview"
end tell
delay 0.2 -- required
New document from the clipboard *)
my raccourci("Preview", "n", "c")
Rotate to left *)
my raccourci("Preview", "l", "c")
Copy *)
my raccourci("Preview", "c", "c")
Quit *)
my raccourci("Preview", "q", "c")
(system attribute "sys2") < 7
if result then
Click the [Don't Save] button in the warning sheet *)
tell application "Preview" to activate
tell application "System Events" to tell application process "Preview" to tell window 1
name of buttons
repeat 50 times
delay 0.1
if exists sheet 1 then exit repeat
end repeat
tell sheet 1 to click button 2
end tell
end if
Back to Numbers *)
tell application "Numbers" to tell document dName to tell sheet sName to tell table tName
-- just reset the focus on the table
end tell
Paste in the cell *)
my raccourci("Numbers", "v", "c")
end run
--=====
set { dName, sName, tName, rowNum1, colNum1, rowNum2, colNum2} to my get_SelParams()
tell application "Numbers" to tell document dName to tell sheet sName to tell table tName
on get_SelParams()
local d_name, s_name, t_name, row_num1, col_num1, row_num2, col_num2
tell application "Numbers" to tell document 1
set d_name to its name
set s_name to ""
repeat with i from 1 to the count of sheets
tell sheet i to set maybe to the count of (tables whose selection range is not missing value)
if maybe is not 0 then
set s_name to name of sheet i
exit repeat
end if -- maybe is not 0
end repeat
if s_name is "" then
if my parleAnglais() then
error "No sheet has a selected table embedding at least one selected cell !"
else
error "Aucune feuille ne contient une table ayant au moins une cellule sélectionnée !"
end if -
I down loaded sygic on my iPhone 3s but the icon is missing even in the search but when I want to download it again ,it say this application is present, how can I make the icon to show up
- Have you tried a reset. Nothing is lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Try syncing the iPod to your computer. Then delete from iTunes and sync. that should delete it from the iPod. Then redownload it. -
Macbook Pro with OSX Yosemite: I am frustrated that when using Word for Mac, the cursor keeps jumping around all over the page. How can I make the pointer follow the cursor so this stops?
Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
* Don't make any changes on the Safe mode start window.
See:
* [[Troubleshooting extensions and themes]] -
How can I make the combo box turn to the value of black.
When the show button is pressed (and not before), a filled black square should be
displayed in the display area. The combo box (or drop down list) that enables the user to choose the colour of
the displayed shape and the altering should take effect immediately.When the show button is pressed,
the image should immediately revert to the black square, the combo box should show the value that
correspond to the black.
Now ,the problem is: after I pressed show button, the image is reverted to the black square,but I don't know
how can I make the combo box turn to the value of black.
Any help or hint?Thanks a lot!
coding 1.
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
import javax.swing.event.*;
public class test extends JFrame {
private JPanel buttonPanel;
private DrawPanel myPanel;
private JButton showButton;
private JComboBox colorComboBox;
private boolean isShow;
private int shape;
private boolean isFill=true;
private String colorNames[] = {"black", "blue", "cyan", "darkGray", "gray",
"green", "lightgray", "magenta", "orange",
"pink", "red", "white", "yellow"}; // color names list in ComboBox
private Color colors[] = {Color.black, Color.blue, Color.cyan, Color.darkGray,
Color.gray, Color.green, Color.lightGray, Color.magenta,
Color.orange, Color.pink, Color.red, Color.white, Color.yellow};
public test() {
super("Draw Shapes");
// creat custom drawing panel
myPanel = new DrawPanel(); // instantiate a DrawPanel object
myPanel.setBackground(Color.white);
// set up showButton
// register an event handler for showButton's ActionEvent
showButton = new JButton ("show");
showButton.addActionListener(
// anonymous inner class to handle showButton events
new ActionListener() {
// draw a black filled square shape after clicking showButton
public void actionPerformed (ActionEvent event) {
// call DrawPanel method setShowStatus and pass an parameter
// to decide if show the shape
myPanel.setShowStatus(true);
isShow = myPanel.getShowStatus();
shape = DrawPanel.SQUARE;
// call DrawPanel method setShape to indicate shape to draw
myPanel.setShape(shape);
// call DrawPanel method setFill to indicate to draw a filled shape
myPanel.setFill(true);
// call DrawPanel method draw
myPanel.draw();
myPanel.setFill(true);
myPanel.setForeground(Color.black);
}// end anonymous inner class
);// end call to addActionListener
// set up colorComboBox
// register event handlers for colorComboBox's ItemEvent
colorComboBox = new JComboBox(colorNames);
colorComboBox.setMaximumRowCount(5);
colorComboBox.addItemListener(
// anonymous inner class to handle colorComboBox events
new ItemListener() {
// select shape's color
public void itemStateChanged(ItemEvent event) {
if(event.getStateChange() == ItemEvent.SELECTED)
// call DrawPanel method setForeground
// and pass an element value of colors array
myPanel.setForeground(colors[colorComboBox.getSelectedIndex()]);
myPanel.draw();
}// end anonymous inner class
); // end call to addItemListener
// set up panel containing buttons
buttonPanel = new JPanel();
buttonPanel.setLayout(new GridLayout(4, 1, 0, 50));
buttonPanel.add(showButton);
buttonPanel.add(colorComboBox);
JPanel radioButtonPanel = new JPanel();
radioButtonPanel.setLayout(new GridLayout(2, 1, 0, 20));
Container container = getContentPane();
container.setLayout(new BorderLayout(10,10));
container.add(myPanel, BorderLayout.CENTER);
container.add(buttonPanel, BorderLayout.EAST);
setSize(500, 400);
setVisible(true);
public static void main(String args[]) {
test application = new test();
application.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
coding 2
import java.awt.*;
import javax.swing.*;
public class DrawPanel extends JPanel {
public final static int CIRCLE = 1, SQUARE = 2;
private int shape;
private boolean fill;
private boolean showStatus;
private int shapeSize = 100;
private Color foreground;
// draw a specified shape
public void paintComponent (Graphics g){
super.paintComponent(g);
// find center
int x=(getSize().width-shapeSize)/2;
int y=(getSize().height-shapeSize)/2;
if (shape == CIRCLE) {
if (fill == true){
g.setColor(foreground);
g.fillOval(x, y, shapeSize, shapeSize);
else{
g.setColor(foreground);
g.drawOval(x, y, shapeSize, shapeSize);
else if (shape == SQUARE){
if (fill == true){
g.setColor(foreground);
g.fillRect(x, y, shapeSize, shapeSize);
else{
g.setColor(foreground);
g.drawRect(x, y, shapeSize, shapeSize);
// set showStatus value
public void setShowStatus (boolean s) {
showStatus = s;
// return showstatus value
public boolean getShowStatus () {
return showStatus;
// set fill value
public void setFill(boolean isFill) {
fill = isFill;
// set shape value
public void setShape(int shapeToDraw) {
shape = shapeToDraw;
// set shapeSize value
public void setShapeSize(int newShapeSize) {
shapeSize = newShapeSize;
// set foreground value
public void setForeground(Color newColor) {
foreground = newColor;
// repaint DrawPanel
public void draw (){
if(showStatus == true)
repaint();Hello,
does setSelectedIndex(int anIndex)
do what you need?
See Java Doc for JComboBox. -
How can I make the background one solid color? It is too difficult and noticeable when I use the retouch button and try to erase all the creases in my backdrop. So, how can I have just a solid white background?
When talking about a specific image posting the image may be useful.
One can use a Layer Mask and add a white Layer underneath. -
I have moved my library to an external hard drive and changed the location of the iTunes media folder in Preferences, but every time I close and re-open iTunes, I have to do it all over again. How can I make the iTunes media folder change permanent? I have an older machine with Windows XP.
I don't believe mounting the hard drive should be necessary, unless you have several external drives and want your computer to recognise them as folders, rather than drives. I've never had to mount a hard drive, ever. If you don't know how to do it, then it shouldn't be necessary now.
Try this:
Prepare iTunes so that it can see the external drive.
Make a note of which drive-letter the external drive has been allocated. (Look in Windows Exploer)
Look at the file location for a song. Make sure it plays (and therefore that iTunes has found it). Highlight it and select File/Get Info/Summary>Where: and make a note of the drive letter for that song.
Close and shut down the computer.
The next time you turn the computer on again, connect the external drive
Before you start iTunes - check the external drive in Windows Explorer. Is it ready, does it have the same drive-letter that it had last time? Can you go into the drive and see the files on it?
Once you can, start iTunes. (If the drive lettter has changed, you need to work out why before going any further.)
If iTunes fails to find your external drive, you need to check where iTunes is looking for your Library.
Select the same song you checked before (presumably iTunes can no longer find it). Follow the procedure for locating it. You should be able to see where iTunes thinks the file is. It's the drive that counts. Which drive letter is iTunes looking at? Is it the same one that it was previously (which should also be the same one that the drive has now).
What happens, which step do you have problems with?
Message was edited by: the fiend -
How can I make the text bigger in iCal?
How can I make the text bigger in iCal? I've looked at Preferences and View.
Sorry, did not see that you are using 10.6.7
-
How can I control the volume in a Appletv movie from my remote control App. In my IPad ?.
How can I control the volume in a Apple Tv movie from my remote control App. In my IPad ?.
There is not now, nor has there ever been a version of flash for any iOS device.
Adobe has abandoned mobile flash, so there never will be.
Browsers like iswifter or photon may work for you, but don't hold your breath.
Check app store for an app of whatever game you want. -
I have a new iPhone 5C, have the sounds alerts set up. But I'm not getting sound alerts for new voicemail, only the red circle on the screen. How can I make the sound alert work?
I have had this same problem for weeks now with my 4S. I just got a new 5S after being extremely frustrated and the same thing - no sounds. After searching posts all over, I couldn't find a solution. I just told my friend of the issue and he asked "Do you have the Do Not Distrub on?" I didn't even know such a function existed. Upon looking that was exactly the issue.
To resolve, go to Settings> Do Not Disturb> Manual. If it is green, turn it off. You will now get phone calls and text alerts.
This functionality is also on your quick access utility menu (slide up menu). I assume this is how it was enabled on my phone.
I will post on other sites since I searched for weeks for this solution and didn't see it anywhere. Good luck!
Maybe you are looking for
-
Hi Experts I got a error like this while posting MIRO "No amount authorization for customers/vendors in company code 401" I tried to look out in T043 Table,since i cant able to go further Let me know the reason for this error and the settings to do R
-
How do i set the mail account to bring up my yahoo emailbox?
you know when you go to a website and there is an email address that you can click on and it brings up your mail account? well, i did have a .mac account for 60 days and i did not want to pay $99 to keep it. i use yahoo for email. how do i change the
-
Regarding Purchase Order Error:
Hai Gurus, I have created a standard purchase order using ME21N transaction code, while saving the system is throwing an error message which reads Error in net price calculation, item 000001 (Please correct). When I changed the payment terms for th
-
Cannot compile java beans in my jsp page
Hi all I have created jsp pages which contains java beans. Now its working fine on my machine(XP OS) but when i put it on windows 2000 server it gives the following error: type Exception report message description The server encountered an internal e
-
Ok was using a verizon wireless router/modem with my mac network. Did all my portmapping right through verizon router controls. (About the only thing that worked well). Now...... I have an airport extreme N router. I am still using the verizon router