How can I make triple partition for OSX, Windows 8, and for saving Data

I read many articles on googles yet I still can't figure out how to.
The point that I get is when you're installing Windows using bootcamp, before it actually try to install windows, i have to go back to OSX, choose disk utility and create the 3rd partition.
But after I continue the installation, the windows boot camp partition can't be formatted and worse I can't use the drive to install windows 8.
Other I read about deleting the recovery partition in order to make it works?
I don't know .... I tried and I failed many times *sigh*

1. Boot Camp doesn't support Windows 8, so wait until Apple releases new Boot Camp drivers.
2. Boot Camp requires only one volume on the hard drive, so you can't create a volume to store data

Similar Messages

How can i make multi partition in mac with windows 7

Dear Sir/Madam
Greetings,
I have a MacBook Pro with
Serial Number C0XXXXXXXXXV16. I want to install windows 7 in my MacBook. I want to create two partitions for my data.
How can I make multi partitions in my computer?
Your early reply and consideration is highly appreciated.
Regards
Anisseh
< Edited by Host >

See the response to your second post for the same question:
https://discussions.apple.com/thread/3563070?tstart=0

How can I make multi partitions in my computer with Windows 7??

How can I make multi partitions in my MakBook with Windows 7??

From what I read you can't. If you used Boot Camp to partition the Macintosh hard drive so you could install Win 7 on a boot camp partition you are locked into that one partition.
If you try to RE-partition that BC partition Win 7 won't boot, and IIRC there is a possibility of OS X not booting (Not sure about that). I just went through this myself.
That's one of the big reason I have gone back to Win PCs as my main systems.
Mac's are OK but to restrictive in what you can do with the hardware, and the OS IMHO.

I have had Firefox for years and in the last 2 weeks, I am getting all of these stupid Pop ups about credit reports and some Epic Play thing. How can I make sure I do not get them and why all of a sudden?

I have had Firefox for years and in the last 2 weeks, I am getting all of these stupid Pop ups about credit reports and some Epic Play thing. How can I make sure I do not get them and why all of a sudden?

Identify and remove adware/malware
http://www.thesafemac.com/arg/

When i burn videos to a dvd-r disc it works on my macbook but not on a windows/pc or my dvd player. How can i make it work on all the above and not just a mac product?

when i burn videos to a dvd-r disc it works on my macbook but not on a windows/pc or my dvd player. How can i make it work on all the above and not just a mac product?

Unfortunately, the recording & movie industry does not respect the rights of the people who make them money, and thus you can only use the paid-for content in ways they see fit. Even if I lived in a bunker where no one else could possibly see the movie I paid for, therefor I'm not 'sharing it illegally', I would still not be allowed in a blue moon to copy that movie to DVD for TV viewing. Someone will tell you to get an AppleTV. How about Apple give us one for free? Until this changes, people wanting to use their content in multiple locations will continue to download music & movies via torrents, legally or illegally.

How can I make two Canvas in one Window ?

I want in the main window ( that is only window in the module ) press button to appear another canvas.
but that I can't make it , I just made two window until the another window appear.
that's all
I tried with :-
show_view('canvas_name');
but didn't work with me Sad
the another canvas made it stacked Canvas .... but also didn't work Sad
so please , How can I make two Canvas in one Window only ?
and thanks in advance

this code work with me :-
show_view('canvas name');
go_block(block_name');
execute_query;
for HIDE button u have to write...
hide_view('canvas_name');
but
that not exactly what I want ...... I want the stacked canvas appear like second window , and could control on it like window .... it could be possible ????

How can I make my computer only recognize my network and not that of one of my neighbors?

How can I make my computer only recognize my network and not that of one of my neighbors? This is for when I am at home, and everytime the computer goes to sleep it essentially loses the connection, only to pick up my neighbors network when it is awaken.
I am on Comcast (Xfinity) Highspeed Cable wireless modem/router
Thanks in advance!
Mark

You can make your network the preferred network.
 > System Preferences... > Network > Advanced... > Drag your preferred network name to the top of the list.

How can you make your persona show on the top and bottom? Also can you make it bigger at the top to show more of the picture?

How can you make your persona show on the top and bottom?
Also can you make it bigger at the top to show more of the picture?

Add extra empty toolbars if you want to see more of the persona.<br />
You can create extra toolbars to get extra space via View > Toolbars > Customize<br />
You have to put something on a toolbar (drag a Space item onto it) before closing the Customize window because empty toolbars are automatically removed.<br />
See http://kb.mozillazine.org/Toolbar_customization

How can I make a global change so all controls and indicators labels on the front panel change to another colour?

How can I make a global change so all controls and indicators labels on the front panel change to another colour?
I need to change the front panel so that it can be used in a dark environment.

Hi
The only way I see, is to use the "Controls[]" property and iterate through all of them. But don't forget about nested elements (i.e. clusters, tab-controls, ...).
Thomas
Using LV8.0
Don't be afraid to rate a good answer...

How can I make an image appear partially in front and partially behind another layer in Adobe Illustrator?

How can I make an image appear partially in front and partially behind another layer in Adobe Illustrator?

Put the image behind the layer (at the back of it or on a layer below). With it still selected, Copy.
Now Paste in Front (Ctrl+F). Depending on your Paste Remembers Layers setting, you may have to bring the newly pasted copy to the front, or to the upper layer.
Draw a shape over the image to define the portion of it you want to appear "in front."
With the shape and the image selected, clip the image using the shape. (Object > Clipping Mask > Make)

I only see the phone numbers of my contacts when using iMessage on my MAC, whereas I see the names on my iPhone. Why, and how can I make it so I see the names (and pics) on my MAC?

I only see the phone numbers of my contacts when using iMessage on my MAC, whereas I see the names on my iPhone. Why, and how can I make it so I see the names (and pics) on my MAC?

Thanks Eric, but that was already turned on. I just now tried turning it off and on again, no change. Actually, I"m more interested in seeing the names than the pictures. I now only see the phone numbers and generic avatars where pics would be.

How can I make Thunderbird start auto with windows start-up

how can I make Thunderbird start auto with windows start-up

You can by placing a short cut in the windows startup folder, just like any other windows program.
However if you do you are likely to encounter problems as downloading mail while the anti virus is still loading and the network is busy announcing your machines arrival to the network ( which might be a network of one) and any of a dozen other program are loading is fraught with risk of timeouts and server disconnections as well as error messages that make little sense because they are about something that is still loading.
So the bottom line is sure you can, but if there are issues take it back out of there as a first step.

How can I make Azure blob give me "206 Partial content" for mp4. Getting 200

I want a video for my web-site, so I am using html+JavaScript found on view-source:https://www.airbnb.com/
see id="pretzel-video"
and script starting from var video = $("#pretzel-video");
The point is - if I copy html+JavaScript on my web-site, I can get "206 Partial content" from airbnb.com, i.e. the video hosted on airbnb.com starts streaming immediately.
The same thing happens if I upload the same video to my domain hosted on arvixe.com and S3 Amazon
The only provider that doesn't give me 206, but responds with 200 instead is Azure blob
This is unacceptable, because the user has to wait until all the video is loaded.
So how can I make Azure blob give me "206 Partial content". I am hosting web-site on Azure also.
I am using airbnb.com video in all three cases to exclude possible errors related to codek etc.

Hi Chao
Azure Blob storage supports return 206 response if you're using API version 2011-01-18 or later .
However if
don't originate the request which means you can't specify this using the request header , you can set the API version globally
for blob service within a storage account by using " Set
Blob Service Properties" API ,
If the above still couldn't solve your issue, we suggest you please contact Microsoft Azure technical support for further assistance.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.
Regards,
Serena Yu
Microsoft Online Community Support

How can I make a migration copy of my email addresses for use in another program.

It is necessary to make a migration copy of all our email addresses for transfer to windows express.
Our office overseas can not use Thunderbird & needs all our email addresses stored in Thunderbird copied for migration into their windows express program. How can this be achieved.?
I think we may also need to transfer email copies too, can this be done.?
If so, how.?
Regards Kym

Ok I have googled, I have found a windows cleaning company in Switzerland http://www.windowsexpress.org/About-Us.htmland something called Parallels Desktop for Mac with instructions for installing windows on a mac.
So I think we need to go back to the beginning with "What is Windows express?"
Email programs as a general rule do not "export" their contents into another mail clients formats. The normal procedure is to "import" the foreign format so there are some obvious questions
What formats can this mail software import?
Are your existing mail accounts IMAP or pop?
you can export email addresses from Thunderbird as CSV which almost all programs can read (including spreadsheets) From the address book select the Tools menu (Alt+ T) and select the export option

How can I make a photo from two merged projects available for a book that I started using one project ? They merge but the book only allows me to access the original project photos even though the merged photos can be seen in the project ?

I have successfully merged two projects in order to add new photos for my book. The library available to the book which has 26 completed pages accesses only the original project library. Has anyone else had this problem ? It is frustrating to see the photos I want in the merged project file, but to have only the original photos when I started the book available in the book library.

That will work, but it is the long way 'round.
As Frank noted, Book Albums are just specialized Albums. Albums can show any Image in your Library, regardless of where the Album is located on the Library Inspector, and regardless of which Project contains the Image. You can put your Albums anywhere (in a Folder called "Books" for example). You can put Images from anywhere in your Library in any Album.
The easy way 'round:
- Make a new Book Album
- Select Images you may want to put in your Book. Flag them.
- Select some more. Flag them.
- Go to the "Flagged" container (listed near the top of the Library Inspector), select all, and drag-and-drop them to your Book Album.
- Repeat as needed, or just drag-and-drop directly into the Book Album.
Note that you can remove any Image from any Album (including Books) by selecting and hitting the "{Delete}" key. This _does not remove the Image from the Project that contains it, or from the Library.
Note, too, that once the Images are in your Book Album, you then put them in the Book you are creating for publication. The Book Album contains the superset of Images with which you populate the Book itself. The Book Album also holds the Book.
A good (imho ) introduction to the parts of Aperture can be found in this short guide I wrote.
The User Manual is helpful. Here is
the chapter on making Books.
From that chapter, here is
the section detailing how to create and populate a Book Album.

How can I make triple partition for OSX, Windows 8, and for saving Data

Similar Messages

Maybe you are looking for