How can I make Zotero fill the screen instead of only the bottom half?

I installed Zotero program but it occupies only the bottom part of my screen. How do I enlarge it and remove the Firefox part in the upper half?

Does your email site have a print button to format the page for printing? That often gives the best results.
If this just started with Firefox 4, it could be related to a change in how strict Firefox is about a page's HTML code. To see whether this problem is caused by the new HTML5 parser, you can turn it off like this:
(1) In a new tab, type or paste '''about:config''' in the address bar and press Enter. Click the button promising to be careful.
(2) In the filter box, type or paste '''html5''' and pause while the list is filtered
(3) Double-click '''html5.parser.enable''' to toggle it to false (it should turn bold).
Then return to your mail site, reload the page, and test again. (Print Preview might be sufficient for testing.)
Does that make any difference? If so, the site might not yet be fully compatible with Firefox 4 -- or you have found a bug in Firefox.

Similar Messages

When firefox opens on my 22 inch moniter, it only shows up in the middle of my moniter and not the entire moniter. How can I make firefox fill my screen?

It shows a white background on all the moniter, but the actual images are shown in the center of the moniter with 5 inches of white screen on both sides of the image. It is also to small of print.

Obviously, I have told the computer to open a folder at startup
Mac OS has had the behavior that if you have a window open at shutdown, it will automatically have that window open at startup - for your convencience. If you do not want that, there is no need to have a folder open at startup and you can easily avoid that. As mende1 said, make sure you quit (that is Command + Q or File > Quit) all applications before shutdown. And, close all open Finder windows by pressing the little red button in the upper left corner. Also check your System Preferences > General > Close all windows when quitting an application.

How can I print my entire draft message, instead of only the part of it that shows on the screen?

I have drafted response to a message I received. I need a copy of the draft to show my associate, but my printer will only print the portion of the draft that can be seen on the screen at one time. I have not previously encountered this problem. What needs to be changed?

Does your email site have a print button to format the page for printing? That often gives the best results.
If this just started with Firefox 4, it could be related to a change in how strict Firefox is about a page's HTML code. To see whether this problem is caused by the new HTML5 parser, you can turn it off like this:
(1) In a new tab, type or paste '''about:config''' in the address bar and press Enter. Click the button promising to be careful.
(2) In the filter box, type or paste '''html5''' and pause while the list is filtered
(3) Double-click '''html5.parser.enable''' to toggle it to false (it should turn bold).
Then return to your mail site, reload the page, and test again. (Print Preview might be sufficient for testing.)
Does that make any difference? If so, the site might not yet be fully compatible with Firefox 4 -- or you have found a bug in Firefox.

Why is the window that I bring up so small? How can I make it fill my screen?

Every time I try to access Bible Gateway on this computer, it is so small I can't read it. I know it is something in the computer settings because the site is not small on other computers.

Try to reset the page zoom on pages that cause problems.
*<b>View > Zoom > Reset</b> (Ctrl+0 (zero); Command+0 on Mac)
*http://kb.mozillazine.org/Zoom_text_of_web_pages

How can i make my scrollpane in a way that at the opening of a frame it doe

How can i make my scrollpane in a way that at the opening of a frame it does not scroll down automatically?
code is below
import java.awt.*;
import javax.swing.*;
import javax.swing.*;
import java.awt.event.*;
import java.net.*;
import javax.swing.JOptionPane.*;
import java.io.*;
import javax.swing.colorchooser.*;
import javax.swing.filechooser.*;
import javax.accessibility.*;
import javax.swing.border.*;
import java.sql.*;
public class Signup extends JFrame
     JLabel p1,p2,p3,p4,p5,p6,uid,upass,cpass,fname,sname,hint,sl,ed,age,adr,cit,zip;
     JTextField uname,fnamet,snamet,hintt,adrt,adrt1,city,zipcode;
     JPasswordField upassw,cpassw;
     JComboBox sex,education,agegr;
     Signup()
     Container c=getContentPane();
     c.setLayout(null);
     c.setBackground(Color.white);
     /** JPanel c = new JPanel();
     c.setBackground(Color.white);
     int v = ScrollPaneConstants.VERTICAL_SCROLLBAR_ALWAYS;
     int h = ScrollPaneConstants.HORIZONTAL_SCROLLBAR_AS_NEEDED;
     JScrollPane jsp = new JScrollPane(c, v, h); ***/
p1=new JLabel("Create Your Icafe!ID",10);
     p2=new JLabel("Personal Information");
     p3=new JLabel("User Address");
     p4=new JLabel("Tell Us About Your Hobbiess (Optional) ");
     p5=new JLabel("Tell us something about what you like. This will help us choose the kind of content to display on           your pages.");
     p6=new JLabel("--------------------------------------------------------------------------------");
uid=new JLabel("User Id");
     upass=new JLabel("Password");
     cpass=new JLabel("Confirmation Password");
     fname=new JLabel("UserName");
     sname=new JLabel("SurName");
     hint=new JLabel("Hint Question");
sl=new JLabel("Sex");
     ed=new JLabel("Education");
     age=new JLabel("Age Group");
     adr=new JLabel("Address");
cit=new JLabel("City");
zip=new JLabel("ZipCode");
     uname=new JTextField(10);
     uname.requestFocus();
     uname.setToolTipText("UserName");
upassw=new JPasswordField(10);
     upassw.setToolTipText("Password");
     upassw.setEchoChar('*');
     cpassw=new JPasswordField(10);
     cpassw.setToolTipText("Confirmation Password");
     cpassw.setEchoChar('*');
     fnamet=new JTextField(10);
     fnamet.setToolTipText("FullName");
     snamet=new JTextField(10);
     snamet.setToolTipText("SurName");
     hintt=new JTextField(10);
     hintt.setToolTipText("Hint Question");
String[] gender={"[Select one]","Male","Female"};
     sex = new JComboBox(gender);
String[] edu={"[Select one]","S.S.C","Inter","Graduate","Post Graduate"};
     education= new JComboBox(edu);
String[] ageg={"[Select one]","0 - 15","16 - 35","36 - 70","70 - 100"};
     agegr= new JComboBox(ageg);
adrt=new JTextField(15);
     adrt.setToolTipText("Address");
     adrt1=new JTextField(15);
     adrt1.setToolTipText("Address");
     city=new JTextField(15);
     city.setToolTipText("City");
zipcode=new JTextField(15);
     zipcode.setToolTipText("ZipCode");
     p1.setBounds(200,70,160,30);
     uid.setBounds(350,100,160,30);
     uname.setBounds(400,100,160,30);
     upass.setBounds(335,140,160,30);
     upassw.setBounds(400,140,160,30);
     cpass.setBounds(260,180,160,30);
     cpassw.setBounds(400,180,160,30);
     p2.setBounds(200,220,160,30);
     fname.setBounds(330,260,160,30);
     fnamet.setBounds(400,260,160,30);
     sname.setBounds(335,300,160,30);
     snamet.setBounds(400,300,160,30);
hint.setBounds(315,340,160,30);
hintt.setBounds(400,340,160,30);
     sl.setBounds(370,380,160,30);
     sex.setBounds(400,380,160,30);
     ed.setBounds(335,420,160,30);
     education.setBounds(400,420,160,30);
age.setBounds(330,460,160,30);
agegr.setBounds(400,460,160,30);
p3.setBounds(200,500,160,30);
     adr.setBounds(340,540,160,30);
     adrt.setBounds(400,540,160,30);
     adrt1.setBounds(400,580,160,30);
     cit.setBounds(370,620,160,30);
     city.setBounds(400,620,160,30);
zip.setBounds(590,620,160,30);
zipcode.setBounds(640,620,160,30);
     Font font = new Font("SansSerif",Font.BOLD, 12);
     setFont(font);
     c.add(p1);
c.add(uid);
     c.add(uname);
     c.add(upass);
     c.add(upassw);
c.add(cpass);
     c.add(cpassw);
c.add(p2);
c.add(fname);
     c.add(fnamet);
c.add(sname);
c.add(snamet);
     c.add(hint);
c.add(hintt);
c.add(sl);
c.add(sex);
c.add(ed);
     c.add(education);
c.add(age);
     c.add(agegr);
c.add(p3);
c.add(adr);
     c.add(adrt);
     c.add(adrt1);
c.add(cit);
c.add(city);
c.add(zip);
c.add(zipcode);
     setResizable(false);
     //int a=DO_NOTHING_ON_CLOSE;
     //setDefaultCloseOperation(a);
     show();
     setSize(800,500);
// Border raisedBorder = new BevelBorder(BevelBorder.RAISED);
     setContentPane(c);
public static void main (String arg[])
     try{
     UIManager.setLookAndFeel("com.sun.java.swing.plaf.windows.WindowsLookAndFeel");
     }catch(Exception s)
     Signup swu=new Signup();

just try the following:
jsp.getVerticalScrollbar().setValue(0);after inserting and adding all your components. this will set the vertical scrollbar up to the very first line.
regards

HT201363 How can I make an Apple ID without credit card if the "none" tab is not visible to me?

How can I make an Apple ID without credit card if the "none" tab is not visible to me?
Help me out please

Hello, aligt9p.
Thank you for visiting Apple Support Communities.
To create an Apple ID without a credit card, there is a specific series of steps that have to be processed in order to allow the payment to be set as none on creation of the account.
Creating an iTunes Store, App Store, iBooks Store, and Mac App Store account without a credit card
http://support.apple.com/kb/HT2534
Why can’t I select None when I edit my payment information?
http://support.apple.com/kb/TS5366
If the specific steps have not been processed, a credit or debit card will be required to complete the setup the account.
However, it can be removed and payment method changed to none as long as there is not an outstanding balance.
iTunes Store: Changing account information
http://support.apple.com/kb/ht1918
Cheers,
Jason H.

I have created a spreadsheet on numbers for ipad with a list of customers as a drop down menu. How can i make their address appear underneath when i select the customer?

I have created a spreadsheet on numbers for ipad with a list of customers as a drop down menu. How can i make their address appear underneath when I select the customer?
iselect the customer?

Hi bazza,
We won't be able to put the address from a formula into the same cell that you enter the customer's name. We can put the address in the cell under the customers name.
First let's take James advice and concatenate the address in the address table.
Here is the formula in G2
=CONCATENATE(B2&"
",C2&"
",D2&"
",E2)
It shows this way because after I clicked on B2 and typed [&"] (no brackets) I typed option-return
This gives you your new line. Then I typed the closing ". I repeated this for the rest of the address.
Next we want to bring this to your order sheet. I prefer using the two formulas OFFSET and MATCH instead of VLOOKUP.
base tells OFFSETwhere to start counting from. Click A1.
row-offset is for the row. we will use MATCH() -1 to give us the row.
What MATCH does is give you the row number where something is found and you can specify an exact match. I usually construct the MATCH formula first and then cut and paste it into OFFSET. MATCH looks like this: MATCH(A2,Table 1::A,0). A2 is what we are looking for, Table 1A::A is where we are looking (the entire column A), and 0 means we want an exact match. Can you see it inside the OFFSET formula? Notice that we had to subtract 1 from its result.
column-offset tells OFFSET which column A=0 so we want 6.
we ignore "rows", "colomns" we don't need them.
If this seems like too much, just break it down into small pieces.
quinn

How can i make it so every time i save something the date is included in the title?

how can i make it so every time i save something the date is included in the title?

More information would be helpful. Are you doing this in an application? If so, what application.

HT4914 If my phone's memory is full, mostly due to music, how can I make it to where my IPad holds all the music and remove all of it from my phone without losing any of it??

If my phone's memory is full, mostly due to music, how can I make it to where my IPad holds all the music and remove all of it from my phone without losing any of it? I recently got an iPad so I now use that as my main source as opposed to my Dell. Yes, I have a Dell that failed me. Miserably.

Sync your music from your computer to your iPad. Then delete the music from your iPhone.

I have two accounts to my computer as administrator. How can I make it so both accounts have access to the same folders and programs? grateful for answers. Martin

I have two accounts to my computer as administrator. How can I make it so both accounts have access to the same folders and programs? grateful for answers. Martin

Obvious question: If you want to have access to the same folders andapplications, why have two accounts? The point of different accounts is that you don't have access to the other person's data.
Any application in the HD/Applications folder is available in all accounts.
Sharing data between accounts depends on the material being shared. So, if you can provide more details we maybe able to help you better.
Regards
TD

How can I make Iphone open in Itunes instead of Iphoto?

how can I make Iphone open in Itunes instead of Iphoto? It never highlites that option when syncing.

http://support.apple.com/kb/HT4627?viewlocale=en_US&locale=en_US
When you turn on iTunes Match or Automatic Downloads, or when you download past purchases on an iOS device or computer, that device or computer becomes associated with your Apple ID. This article describes how to manage these associations.
You must wait the 90 days.

How can I make word document window bigger. Have tried dragging bottom corner out & clicking on '+' sign but this does nothing?

How can I make word document window bigger. Have tried dragging bottom corner out & clicking on '+' sign but this does nothing?

Word - Microsoft Support

How can I make my email boxes smaller, so that all the stuff does not show after I have opemed it?

The email that I am reading is very large with a lot of stuff that I do not need to see. How can I make my box smaller?

''hhennes [[#question-1047185|said]]''
<blockquote>
The email that I am reading is very large with a lot of stuff that I do not need to see. How can I make my box smaller?
</blockquote>

How can I make an invalid dynamic disk Array available to the OS again

Hello Storage Pros
The setup
I have a Promise VTrak E610f head unit with 2 VTrak 610j expansion units attached to it together giving me over 27 TB of usable storage space.
At the hardware level I slip the storage into 6 parts containing 7
1TB disks and had the parts configured into 6 RAID 6 arrays. In the end; each of the 6 arrays gives me 4.6TB of usable storage space.
On the OS level, I have the storage attached to 2 servers: Windows server 2008 and windows server 2008 R2 over a Qlogic fiber channel switch. Each of the 6 arrays are viewable as basic disks of 4,6Tb which I went on to configure as a single RAID 0
spanned volume of 27TB and for that all the disks had to be converted to dynamic.
The problem
Now comes the problem: On my first attempt to do a firmware update on the VTrak E610f storage; all the volumes were rendered foreign and I had to import them to be able to use them. Although the import was successful, I lost all the set NTFS permissions
and SMB share and I had to manually reconfigure them. Upon doing so The OS registered some inconsistencies in the storage and recommended that I ran chkdsk. Since the storage is that big I reluctantly complied and restarted the server.
The first server was restarted BUT chkdsk did not commence as scheduled, the server powered right up. After logging in to inspect; I discovered - to my surprise, that the disks were now shown as invalid in Disk Manager and were no longer visible to
the OS. Assuming that maybe a restart of the other server and the storage would set things right, I went ahead to do so but to no avail. After rebooting the entire system (including the storage), the other server also displayed the disks as invalid and were
no longer visible to the OS as well.
My question is; how can I make the disk available again from this ‘invalid’ state without losing data?
What I tried but did not help:
Taking the disks offline and then online again did not work, after the disks were online again, they still appeared as invalid.
Reactivating the disks threw an error “operation not allowed on an invalid disk pack”
Calling support of the storage manufacturer: they did not find anything wrong with the system, after 5 hours we had to stop.
I fear converting the array from dynamic to basic will destroy all the data.
HxD is showing no errors in the disks
If there is any expert out there with helpful tips; your assistance will be greatly appreciate.
Cheers
John

Hello Shoan
Thanks a lot for your response and tips. Sorry I could not get back to you in good time for I had to run some of the tests you provided, it took some time to
thoroughly re-test the system.
The summary
The initial firmware upgrade attempt forced 3 disks offline and the other 3 became foreign. I had to re-import them to have access again. after re-importing
the disks I realized all NTFS permissions and SMB shares of the folders on the disks had disappeared, but at least the disk was visible and accessible at that point - but not fault free. It was recommened that I let chkdsk run. However rebooting the
system to allow chkdsk to run did not result in chkdsk running, instead chkdsk did not run and after restart, the OS showed the disks as invalid. And that is still the case now.
Response to your questions:
Yes the storage array was (and is still) connected to another server 2008 R2 server when the problem occurred. The second server is also displaying the same problem: the disks are shown as invalid.
The loss of SMB shares and NTFS permissions occurred after the initial firmware upgrade attempt, some disks (3 out of 6 of them) were forcibly offlined and the other 3 were, suddenly, marked as foreign. In the end, and to have access to the disks
I had to online the offlined 3 disks and then reimport the rest of them. From the way I understand it, if the upgrade was not the cause, then at least it was the trigger.
In as far as converting disks from dynamic to basic, I was not in luck so far:
Three of the companies I have contacted (recommended by promise Technology technician) so far only work with smaller disks like 2TB, 27 TB like I have is so
far too big.
I’m not sure converting the disks to basic will help much though, since that would break the single 27 TB volume which the OS was working with into 6 individual
disks of 4.6 TB. Will I be able to get the data back that was written to just one volume from those 6 individual and unrelated disks?
Above all, I have connected the RAID storage system to a newly installed Server 2008 R2, the disks are also shown as invalid.
I have spent more than 17 hours in remote sessions with a Promise Technology technician trying the resolve the issue. From the technician’s side all seems in place with the exception
that the disks are invalid in the OS.
I have contacted Microsoft Customer Support service with the issue. Given that Microsoft did not manufacture the storage unit, can they help at this point – or am I better off
putting my hopes else?
Your help is always appreciated and again, thanks for your response and advice.
JohnV

How can I sync specific photos from folders instead of syncing the whole folder to my iPad?(1 gen)

So I recently synced a few folders from my PC to my iPad 1 and there was a few photos I did not want on my iPad, so when I tapped the photo, the trash button wasn't there. I looked up why that was happening and discovered it was because synced photos can't be deleted from the photo library. So I ask my question, how can I sync specific photos from folders instead of the whole folder? from iTunes to my iPad. If there is not a way for me to sync specific photos from folders, how can I delete the photos I don't want from my iPad?

As King_Penguin has already explained, this isn't possible with the stock Photos app.
As far as photo syncing is concerned, I also recommend PhotoSync, which is an excellent photo (and video!) synchronization tool, should you want to stick with the stock Photos app on the iPad. Should you want something better (Photos is a pretty limited app without sorting, EXIF displaying etc. capabilities and with HUGE storage usage), you'll need to take a look at third-party apps. I too recommend Photo Manager Pro, it's IMHO the best tool. There's a complete roundup of image viewers for iOS at http://www.iphonelife.com/blog/87/all-one-photo-viewer-roundup-70-price-drop-bes t-image-viewer ; you might want to read it.

How can I make Zotero fill the screen instead of only the bottom half?

Similar Messages

Maybe you are looking for