How can I manage these two requirement in SLCM ?

I have 2 conflict requirements on event offerring module.
One is lock the user for set up the same resource (same room , same advisor , same date and same time) in difference SM.
Another one is have to allow pair of SM to set up with the same resource (no need to lock)
How can I manage this requirement ?
BR
Vo Cha.

Hi Vorad,
One is lock the user for set up the same resource (same room , same advisor , same date and same time) in difference SM.
Colliding of resources is already taken care when you create events during event planning .
Another one is have to allow pair of SM to set up with the same resource (no need to lock)
You can set up a same resource provided the resouce should not collide with the same time .
Eg : Lecturer A handling Maths at different sections , time .
Note :
Eg : For an year, session . Event Package design varies depend upon the university and it is very flexible .
=> Event Package has its own capacity , you can assign the events to the event package . Events are short term and it also has it own capacity .
=> But once the event package is booked for students , it cannot be modified .
For more understanding :
Event Planning :
http://help.sap.com/erp2005_ehp_03/helpdata/EN/5c/2dfe2acd4d11d2abe700a0c943a389/frameset.htm
Regards
Gajalakshmi

Similar Messages

How can I get these two results in two different columns?

SELECT COUNT(attr_id)
FROM pv_attribute
WHERE port_id = 322;
SELECT COUNT(attr_id)
FROM pv_attribute
WHERE port_id = 323;
How can I get these two results in two different columns?
Thanks

So Jens made a tiny mistake with the column name... shame you couldn't be bothered to research Pivoting so you could have corrected the mistake (possibly it was deliberate *{:-) ) and learnt something.
with pv_attribute as (select 16123 attr_id, 322 port_id from dual union all
                      select 16123 attr_id, 322 port_id from dual union all
                      select 19223 attr_id, 322 port_id from dual union all
                      select 11193 attr_id, 323 port_id from dual union all
                      select 13163 attr_id, 323 port_id from dual)
-- end of test data setup
select sum(decode(port_id, 322, 1, 0)) cnt_322,
       sum(decode(port_id, 323, 1, 0)) cnt_323
from   pv_attribute
where port_id in (322, 323)

How can I combine these two DAQ tasks???

I am using LabVIEW 11, Windows XP, cDAQ-9174 chassis, two NI-9205 modules.
Please see my code for reference. I am very new so i will accept all suggestions.
I am acquiring 12 volatage signals in a producer/consumer structure giving me a queue of 1-d array of waveform(dbl). Then I am acquiring 12 voltage signals in another loop giving me 2-d array of waveform(dbl).
There is an issue creating the channels. How can I combine these two tasks?
Thanks,
~Chris
Attachments:
WaveTest_6.2.vi ‏558 KB

Hello chrisbe723,
When you say that there is an issue creating the channels, are you getting a specific error message when running your code? Also are you referencing the same set of channels for the two DAQ task you are configuring?
Paul-B
Applications Engineer
National Instruments

I've recently purchased an album, but it has not fully download.there is two songs missing. How can I download these two tracks? Please.

I've recently purchased an album, but it has not fully download.there is two songs missing. How can I download these two tracks? Please.

iTunes Store > Purchased > Music > Not on this computer.
tt2

I added extension: Print Friendly initial rev72.1 & Print/Print Preview 0.9 but they don't appear on the add on bar. How can I use these two?

My OS is Windows 7 and I recently upgraded to Firefox 23.0.1 and then installed the extensions: Print/Print Preview 0.9 and Printfriendly initial rev 72.1. When I go to the add on manager they are listed and not disabled. Under Toolbars, the following are selected: Menu Bar, Navigation Tool Bar, Bookmarks Tool Bar, Add-On-Bar. I don't see any of my Extensions on the Add-On-Bar. At the bottom left of the browser window appears an "x" for closing the Add-On-Bar. There is nothing else showing.

Print/Print Preview uses and appends to the default Print button that comes with Firefox. If you don't have that button, use the '''Restore Default Set''' button in the lower-right corner of the Palette.
As far as Print Friendly, the AMO download page says that button is placed on the Add-on Bar by default. If it isn't there maybe "Restore ...." will fix it, and if not I would suspect a compatibility issue.
Beyond that I can't help you, as I use the Print Edit extension which works fine with Print/Print Preview . I don't like Print Friendly due that extension using their website instead of doing the "editing" within the users browser. Potential security issues for me.
Note, I have tried the Print Friendly bookmarklet which works very much like their extension, and after examining the code and having a person who I consider well-versed with JavaScript look at it - I decided to use Print Edit instead.

I have an iPAD mini (4?), everything else in the house is windows. I want to print (using a Canon MF3010), aand also sned Facetime views to the TV, which is pre HDMI. How can I do these two things?

I have an iPad mini 4; how do I print to a Canon MF 3010?
How do I send ANYTHING TO A PRE HDMI TV?
thanks

For Printing, after checking this page:
AirPrint basics
http://support.apple.com/kb/ht4356
It appears your printer is not Airprint compatible. In fact it appears as though your printer is not Wireless even. So you will be limited to sharing applications installed on your Windows computer.
Try this guide and see if it works for you.
http://tweaks.com/windows/46495/enable-ios-airprint-support-on-windows/
Basically you'll need to find an application that can share the printer out to your wireless network using the AirPrint protocol which is what iPads use to communicate with printers.
For the second part of the question:
The short answer is you won't be able to do it directly. To view facetime on your Tv you need to mirror your iPad's screen. either through the Av Digital adapter, which connects through HDMI to the TV, or through an Apple TV which only has HDMI output.
So your only option is to get an HDMI to composite converter to plug either between the Apple Tv and the TV, or between the Digital AV adpater and the TV.
Something like this:
http://www.amazon.com/ViewHD-Universal-Composite-Converter-Standard/dp/B0080KN18 K
Apple TV
http://store.apple.com/us/browse/home/shop_ipod/family/apple_tv
Lightning Digital Av Adapter
http://store.apple.com/us/product/MD826ZM/A/lightning-digital-av-adapter
Oh, and an iPad 4 and an iPad Mini are 2 different products. One is the normal Sized iPad while the other one is the smaller sized version.

I have two excel files I cannot open or delete from my desktop. One is titled 6ACAD200 and the other file is titled 8D73A700. How can I get these off of my computer?

I have two excel files I cannot open or delete from my desktop. One is titled 6ACAD200 and the other file is titled 8D73A700. How can I get these off of my computer?

From the names I'd guess they are temporary files. If excel is running, quit and try again. If they still won't move or delete reboot. If they still won't move or delete...kill a chicken at midnight under an oak tree?

Hi, when I upload music into itunes from a cd it sometimes appears in itunes as two different albums and split up the music in 2 or even three albums....how can i merge these albums...this is particularly true when one album may have different composers?

Hi, when I upload music into itunes from a cd it sometimes appears in itunes as two different albums and split up the music in 2 or even three albums....how can i merge these albums...this is particularly true when one album may have different composers?

Generally setting a common Album title and Album Artist will fix things.
For compilations that aren't, select all tracks, Get Info, and on the option tab set Part of a Compilation to No. If it already says No tick the box alongside, then click OK.
For deeper problems see Grouping tracks into albums.
tt2

Following two changes to my computer it is only my iPod classic which has my full library of tunes on it - how can I transfer these back to the computer?

Following two changes to my computer it is only my iPod classic which has my full library of tunes on it - how can I transfer these back to the computer?

Hello, Ray.
Thank you for visiting Apple Support Communities.
There are a couple options available to you to transfer purchased media to your computer. Below, I have included a couple articles that outline this process.
iTunes Store: Transferring purchases from your iOS device or iPod to a computer
http://support.apple.com/kb/ht1848
Please note that this feature works only for items that were purchased on the iTunes Store. Any items imported from audio CDs or acquired from other sources will not copy from your iPod to the iTunes library.
Downloading past purchases from the App Store, iBookstore, and iTunes Store
http://support.apple.com/kb/ht2519
If you still have access to your old computer, see the steps in the article below.
iTunes: How to move your music to a new computer
http://support.apple.com/kb/ht4527
Cheers,
Jason H.

How does one manage these new render setting for previews?

I placed 4 HD clips from a nested into a sequence 5800 x 768 to mimic 4 side by side monitors for a multi channel video. Each clip cut from the sequence are at 1280x720 all sitting side by side. However when I rendered the previews, they came look all squished. However when I exported the frame it looks fine in Photoshop. (I changed the uploaded image to what it looks like in Premiere in Photoshop to demonstrate the appearance in Premiere.)
I imagine that the distortion has to do with the sequence render setting which for some reason comes out to 1918 x 253...or the pixel aspect ratio? How does one manage these new render setting for previews so it looks normal in the monitor?


Either way, I thought that this format would be a great way to view on the monitor 4 channels at the same time. I may need to place them on a “normal” 1440 x 1080 sequence in a line, bringing them down to 25% scale to make it work in the end. I did just try that. I think it will work...but when I imported and nested the old file, the scratch disks changed from the original set up on a D drive back to the main hard drive so I had to change it agin. Otherwise it works fine...so I’ll go with this for now
These are the instructions I was given.I attched a screen save of the AE file they asked me to use (They must be on vacation, because I have not been able to get hold of them). I don't know After Effects very well:
“As you begin creating or adapting work for e4c, you may find an After Effects template developed for this system to be helpful. Attached you'll see a zipped file with two AE templates. There is some detailed information (below) from the artist that developed these for us. In addition, a few bits of information that might help you along are:
·        The "Watchout" playback system can support WMV or a QuickTime files . We like .mov files with H.264 codec best!
·        The end resolution of the four screens is 5120 x 720 pixels (1280x720 each).
·        If works are four-channel, please provide a separate audio (aiff) file so it doesn't slow any one video down.”
Thanks for your help!

How Can I Manage Topic Statuses and Workflow (RoboHelp 8)

I'm the sole RoboHelp author in a company with a project lifecycle that didn't require me to work concurrent Help updates. I had time to finish an update and publish before starting work on another. Now I have multiple projects hitting my desk that need to publish on differing schedules.
My question is, how can I more effectively manage my workflow? For example, I currently need to publish a Help update for Project 1 that only impacts two topics; however, I have updates for three existing topics in review for Project 2 that doesn't rollout for three more weeks. If I generate an update for Project 1 now, my Project 2 topics that I don't want to publish yet will be included in the compiled file. How can I manage this situation?
It looks like I can set a topic status. Currently, all my topics use the default "In Progress" status. Should I set all my topics to "Complete" and reserve "In Progress" and "Ready for Review" for those that I'm working on for my various projects? Would it enable me to publish completed topics for Project 1 and default to the original content for the three Project 2 topics I status as "In Progress" or "Ready for Review?" As I noted, I don't want Project 2 updates to compile with Project 1, but do want their original content to be included in the file until such time as I'm ready to release the updates.
Thanks

I'm not clear how source control will help here. I believe the problem is about working on topics that are not to be included in an output. This is achieved by using conditional build tags. Apply a tag of say WIP to topics and content that is not ready to be generated. When the help is generated, apply a build expression of Not WIP.
Source control would only be necessary if there is more than one person working on the project.
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

How can I manage 2 ipods on one Itunes library?

I'm sure this must have been answered elsewhere but I can't find a difinitive answer...
I have an ipod which I want to keep at home and am thinking of buying a Nano for when I'm out. How do you manage the two devices when obviously one carries vastly fewer songs?
I read somewhere that you need two itunes accounts but surely there are loads of people now with a large capacity device plus a smaller one - is it not easier than that having two seperate accounts now?

How to use multiple iPods with one computer
http://docs.info.apple.com/article.html?artnum=300432
Managing content manually on iPod
http://docs.info.apple.com/article.html?artnum=61148
iPod: Frequently Asked Questions
http://docs.info.apple.com/article.html?artnum=60920
Patrick

How can I set up two iPhones with the same contact, photos, music etc... but a different sim card and phone number. They will both be my phones, but one will be for use in other countries.

How can I set up two iPhones with the same contact, photos, music etc... but a different sim card and phone number. They will both be my phones, but one will be for use in other countries.

Phone A = phone with information you want duplicated
Phone B = phone that you want to copy from A
Backup Phone A.
Wipe Phone B using these instructions. What to do before selling or giving away your iPhone, iPad, or iPod touch - Apple Support
Phone B should be on the 'Hello' screen. Do not swipe it. Launch iTunes. Plug in Phone B.
When iTunes asks if you want to set up as new phone or restore from backup, choose restore from backup of Phone A.
After this setup, any changes to one phone (i.e. adding a contact, downloading an app) will have to be manually duplicated on the second phone, if that is your desire). Making changes to one phone will not affect the other after setup.

I am uploading receipts using the PURCHASE_ORDER_RECEIPT EIP. When I upload serialized assets each one is processed as a separate receipt (receiver_id). How can I have these all aggregated on the same receipt?

I am uploading receipts using the PURCHASE_ORDER_RECEIPT EIP. When I upload serialized assets each one is processed as a separate receipt (receiver_id). How can I have these all aggregated on the same receipt?
Is there a parameter I should be using in the XML or is there a setting in Peoplesoft that will accomplish this?
Jim

sundy.liu wrote:
Unfortunately however, even with the TCP tweaks enabled, I still only get a little over 1 Gb/s through the two aggregated Gig ports. It seems as though the aggregation is only using one port, though MRTG graphs of the two switch ports do in fact show that they are both being utilized equally, essentially splitting the 1 Gb/s speed between
the two ports.
Problem with the server? switch? Aggregation software? All the above? At any rate, I seem to be missing something.. Any help regarding this issue would be greatly appreciated!If you're only running a single stream, that's all you'll see. Teaming/aggregating doesn't make one stream go faster.
If you ran two streams simultaneously, then you should see a difference between a single 1G interface and an aggregate of two 1G interfaces.
Darren

How can I manage more RAM on my iPod Touch 4G ?

How can I manage more RAM on my iPod Touch 4G ?
My iPod Touch 4G used to have 120MB of free RAM, but it suppost to have 256MB of RAM...120MB is totally not enough for the applications and the iOS to run smoothly...my applications always close in a sudden and the iOS is extremely lag...
I'm thinking is there anyway to manage of free more RAM on my iPod Touch 4G, I wanna free at least to 150MB...
I've tried iMemoryEnhancer, Mem Tool, Daemon Tools and Memory Free; but none of them work...I've also tried simply click on Free Memory on SBSettings...but all applications came out with the exact same result...120MB...
My iPod Touch 4G is running on iOS 4.3.1(8G4) and got 277 applications installed with around 10 Cydia tweaks..so please can anybody help me out ?
TYVM

try these
1. quit apps on MT bar
2. restart your ipod
also, how many G(or M) have you used in the ipod, and how many G do you have in orginal?
Calvin

How can I manage these two requirement in SLCM ?

Similar Messages

Maybe you are looking for