How can I measure RMS with the AI-102?

Hi folks,
Can anyone tell me a way to measure RMS voltage with the AI-102? I need to measure 0-1 VAC. It seems like there should be a way to collect a sample of voltages and put them in an array to calculate RMS. Since I'm not approacing the limit of the module's voltage range, there shouldn't be any danger of clipping the signal.
Has anyone out there attempted this?
Thanks,
Eric

Hi!
I've never worked with an AI-102, but from the specs I see there's an update rate of 2.8 ms (quite slow...), for a bandwidth of 170 Hz, so the main question is: what frequency band your input signal lies in? Is it slow varying?
If your signal's frequency is low enough (I'd suggest below 100 Hz, below 50 is better), you can simpli sample voltage and average samples over time (maybe with some clever techniques...).
Let me know if this help....
graziano

Similar Messages

In iPhoto, how can I export images with the metadata - including the title and caption information - intact as part of the image?

In iPhoto, how can I export images with the metadata — including the title and caption information — intact as part of the image?

Check those boxes in the export dialogue - Exporting From iPhoto
LN

My HDD crashed and I had to reinstall my boot and programmes on a new HDD. I managed to recover my library.itl. How can i import it with the new version of itunes? When i try imprt playlist, it replies that it is not a validly exported file.

My HDD crashed and I had to reinstall my boot and programmes on a new HDD. I managed to recover my library.itl. How can i import it with the new version of itunes? When i try imprt playlist, it replies that it is not a validly exported file.

It should be like the very first time you synced your phone with I-Tunes. It will notice you haven't synced before and just copy everything from your phone into I-Tunes. It shouldn't delete anything from the phone, at least it never has for me. It just puts a copy of everything into I-Tunes and even if you delete an app for example from your phone and you decide you want it back later, you can just go back into I-Tunes and copy it back over. Hope this helps.

I want to boot my new mini mac in OX 10.6.8 how can i do it with the last mini mac 2,3 Gh i7 ?

i want to boot my new mini mac in OX 10.6.8 how can i do it with the last mini mac 2,3 Gh i7 ?

Stef207 wrote:
i want to boot my new mini mac in OX 10.6.8 how can i do it with the last mini mac 2,3 Gh i7 ?
Those specifications are not for the "last" mac mini, but for the mid-2011 Mac Mini: Macmini5,2.
While that model came with Lion and could not be downgraded to Snow Leopard out of the box, look for the work done by newfoundglory https://discussions.apple.com/people/newfoundglory in this thread on how to accomplish an install of Snow Leopard that will allow that model of Mac Mini to boot into Snow Leopard, if it is that important to you:
https://discussions.apple.com/thread/3209335?start=0&tstart=0

HT5622 I own three Apple devices, but my iPad remained associated with my old email address and password. How can I register it with the same new email and password?

I own three Apple devices, but my iPad remained associated with my old email address and password. How can I register it with the same new email and password?

If you updated your existing account then try logging out of it on the iPad by tapping on the id in Settings > Store and then log back in and see if that 'refreshes' the account on the iPad. If you created a new account then any content that you purchased/downloaded via the old account will remain tied to that old account, and only that old account can download updates to its apps.

HT204088 My credit card was charge with out my approval, how can I get support with the issue?

My credit card was charge with out my approval, how can I get support with the issue?

If it's a purchase that appears on your purchase history (and not a temporary store holding charge which is made each time that you add or change your credit card details) and nobody else has access to your account and/or devices, then you can either try the 'report a problem' link from your purchase history to contact iTunes Support : http://reportaproblem.apple.com
Or you can try contacting iTunes Support via this page : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

How can I merge folder with the same name so that the content does not replace the other

How can I merge folder with the same name so that the content does not replace the other?

>
That's only a good idea if the semantics of sayHello
as defined in MyInterface suggest that a
RemoteException could occur. If not, then you're
designing the interface to suit the way the
implementing classes will be written, which smells.
:-)But in practice you can't make a call which can be handled either remotely or locally without, at some point, dealing with the RemoteException.
Therefore either RemoteException must be part of the interface or (an this is probably more satisfactory) you don't use the remote interface directly, but MyInterface is implemented by a wrapper class which deals with the exception.

How can I import pics with the title info?

How can I import pics with the title info? Title info not importing, just the pics with original title info

jfromcal wrote:
the info is on the pics on the cd I'm importing to my iphoto library. I maybe using the wrong terminology. Basically naming or writing a description underneath for each individual photo.
js
exactly where is it - the file name? in the IPTC data? Actually "on the photo"?
LN

HT1918 I'm trying to switch my primary Apple ID (email) with my secondary email. How can I swap primary with the secondary?

I'm attempting to switch my primary Apple ID (email) with my secondary email on file. When I try, prompts say I can't replace either with the other email because the other email is in use. Do I have to cancel BOTH emails in order to add them back in the positions I want to? Thanks.

1) Yes
2) It tells me that is not available and then: "This email address is not available for use as an Apple ID. You may already have an Apple ID associated with this address. Please try again or sign in using your existing Apple ID."
...obviously I have only one apple ID.

How can I measure RPM with CTR-500 module?

I have used the CTR-500 module for mesurement of motor RPM. But it doesn't have direct option to measure RPM ,
so i have count pulses for 1sec (then reset the counter) and by calculation show the result for 1min. But it varies every time ,cant give me fix RPM.
I want reliable solution for this.

min
You have not said how much the RPM actually varies from reading to reading and what the range of measured RPM is for the process. This variation can be caused by a couple of things. One would be actual variations in RPM due to changes in motor loading. What is this motor driving? Most RPM readouts use some form of sample averaging to smooth out the readings.
A second cause could be your vi. Suggest you post a copy of your vi.
In case you have not seen it, here is a link to a KB about measuring frequency with cFP. It also links to several other docs on the same subject . http://digital.ni.com/public.nsf/allkb/D8DB42F9FDC3607E862568640047F144?OpenDocument

I have lost my previous apple ID details, how can I replace it with the new one? knowing that i have all the bills and docs needs. Thank you?

Greetings,
I live in Istanbul, Turkey
I have lost my old Apple ID details including the Password and Email address
I have created a new one now but my iphone is locked to the old apple ID
it keeps telling me that his phone is currently linked to the old ID I have to enter the email and password, which i have already lost
The iphone is mine, where i have all the needed docs and bills with the packaging and insurance.
Please let me know what should I do
and how can I contact apple support to sort this issue out.
Thank you for your help
Waiting for your early reply.
Regards
Bassam.

Contact Apple using the Contact Us link at the bottom of the page here.

How can I synchronize blackberry with the calendar??

My mac air with the Mavericks dose not sincronize calendar with blackberry. How can I do it?? it's very important for me and I suppose for many other people.

To sync with iPhone's calendar (also called iCalendar) you need to use a cloud-based calendar. If you already have lightning, install the Google Provider addon and setup Google Calendar. If you have already done that, go to settings on your iPhone. In the Mail, Contacts, and Calendars area, add your Google account, and turn on Calendar. This will sync your Google Calendar with the iPhone.

I made a mistake & loaded the version of Firefox (4) that my computer cannot support. Now I am unable to use it. How can I replace it with the latest one I had previously (3.6.20)?

It's my own fault. I was warned that my old iMac (running only on Tiger) was not capable of receiving Firefox 4. But I did an experiment and tried loading it anyway.
Now, a disabled version of Firefox, that I cannot open, is the only version of Firefox on my computer. I'm sure it made everything I was using on Firefox disappear!
Is there some way to replace this disabled version with the latest one I CAN support?

Downgrading from Firefox 4 to Firefox 3.6.20
1. Visit ftp://ftp.mozilla.org/pub/mozilla.org/firefox/releases/3.6.20/mac/
2. Find your language and Open Firefox 3.6.20 folder
3. Download and install Firefox setup file (3.6.20 dmg)
You’ll be automatically downgraded to Firefox 3.6.20 and your favorite add-ons, bookmarks and settings will remain untouched.
thank you
Please mark "Solved" the answer that really solve the problem, to help others with a similar problem.

How can I overwrite iTunes with the music on my iPhone 4?

I turned on home sharing in iTunes, to share purchases with my hubby. Now my iTunes is completely f*****!!! My iPhone (iPhone 4, now used solely as an iPod), is as I would like iTunes to be but for the life of me, I cannot find a reasonable, SIMPLE way to overwrite iTunes and I do NOT want to spend hours and hours sorting through, re-importing my now useless and completely frustrating iTunes library!!! Please, help would be GREATLY appreciated!!!!!!

I haven't really played with home sharing, but you may be able to sort the songs list on Date Added and find you can easily select and remove the unwanted content.
Alternatively see Recover your iTunes library from your iPod or iOS device.
tt2

I am making an ad for a virtual magazine. It needs to have a hyperlink to my website, but must be submitted in a TIFF, PDF, JPEG, or EPS file. How can I do this with the Photoshop file I have already made? Please Help!!

New to Photoshop here, please help!

Normally the best way to create an add is to to do it and to export it as PDF/X-4.
From Photoshop you can save as PDF, choose either the standard as the printer asks for or save as PDF/X-4.
Never use in any case EPS.
If the add contains vectors and/or fonts PDF is the best file type.
If no text or vectors are used you could use JPG with high compression quality, tiff or (not in your case) psd.
Take care that
Your file is not flattened to background, so all layers are alive, otherwise fonts will be rasterized.
You file should have a resolution in minimum between 240 and 300 ppi (not dpi)
With the text: is it pure black or is it 4c-black? K-Black is easier to accomplish in InDesign.
Don't make small elements in 4c.

How can I measure RMS with the AI-102?

Similar Messages

Maybe you are looking for