How Can I Migrate My Time Machine Backups To A New External Hard Drive?

I have a external hard drive that has 500 GBs left, but I want to buy a larger drive.

ivan wrote:
How Can I Migrate My Time Machine Backups To A New External Hard Drive?
I have a external hard drive that has 500 GBs left, but I want to buy a larger drive.
Hi iVain
Fire up *Disk Utility*, click the Restore tab, then drag your old and new TM drives into the Source and Destination fields. Click Restore, and a complete copy of your old TM files will be made on the new drive. Go to TM preferences and select the new drive, and it will continue backing up just as it left off.
Hope this answers your question. See:
http://discussions.apple.com/thread.jspa?threadID=2595485&tstart=0

Similar Messages

Can I transfer a Time Machine backup to a new empty hard drive, without installing Mountain Lion again?

Can I transfer a Time Machine backup to a new empty hard drive, without installing Mountain Lion on that new hard drive?

Yes - I just did it the other night. Took five hours, but it finally finished and is working great.
I sort of followed the instructions found here -->> http://pondini.org/TM/18.html.
Also, if you want to have dual backups, see -->>
http://pondini.org/TM/27.html.
I say 'sort of' because I used Carbon Copy Cloner to do a block-level transfer. I just didn't want to get hung up with a Finder copy.
Give CCC a try - you have to enable the block copy in Preferences before using this method, but I was quite happy with it. I used it to move over 1TB of TM backups from a FireWire 800 drive to a 2TB Thunderbolt drive. 5 seconds short of taking 5 hours.
It should work well for you.
Clinton

Checking time machine backups with a new external hard drive

Is there a way to make sure that my backups are complete looking at time machine? All I see is the front page for each backup and dont see how to open it and look at the files that were backed up? I have a new LaCie ext hard drive that Im using and want to make sure it is working properly. Also, do I need to change my sleep settings to allow Time Machine to have adequate time to back up, or does it take care of everything?

Cumby wrote:
Is there a way to make sure that my backups are complete looking at time machine? All I see is the front page for each backup and dont see how to open it and look at the files that were backed up?
Are you going into Time Machine from your desktop? If so, TM will show only the desktop in your backups. Try starting from a Finder window of, say, your home folder, then go into Time Machine. You should be able to select a backup and navigate within it just as you would normally, and see the complete "snapshot" of everything that was there at the time of the backup you selected.
Separately, Click here to download the TimeTracker app. It shows most of the files actually saved by TM for each backup (excluding some hidden/system files, etc.).
I have a new LaCie ext hard drive that Im using and want to make sure it is working properly. Also, do I need to change my sleep settings to allow Time Machine to have adequate time to back up, or does it take care of everything?
TM will do all that for you. If your Mac falls asleep, TM will just do a backup when it awakens. If you manually put it to sleep (or power off) while it's doing a backup, it will just pick-up and continue when it's awake again.

How does one SUCCESSFULLY transfer Time-Machine backup to a new (larger) hard disk drive using OSX 10.5.8

I have read a number of articles about how to transfer a complete Time-Machine backup to a new (larger) hard disk-drive. Some of these articles are specifically for OSX10.6 users, which are not applicable to me since I am operating with OSX 10.5.8.
However, I have tried several times to use the Disk Utility 'Restore' function, dragging my old time-machine volume into the 'Source:' box and my new volume into the 'Destination:' box. This works, of sorts, BUT the newly created volume on the new larger hard disk-drive remains the same size as the original volume on the old Time-Machine HDD, with no apparent way of increasing the new volume's size. So I am not really any better off:
E.g. the total capacity of my new HDD is stated by 'Disk Utility' to be 465.8 GB, of which I'm told 228.2 GB is used for the Backups.backdb folder, but only 4.6 GB of free space is actually available. Yet under the 'Partition' tab of 'Disk Utility' it tells me that there is still 236.4 GB of available space.
Does anyone know how to resolve this issue without upgrading to OSX 10.6?

First, how did you prepare your new drive? See:
Drive Preparation
1. Open Disk Utility in your Utilities folder. If you need to reformat your startup volume, then you must boot from your OS X Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID (for Intel Macs) or APM (for PPC Macs) then click on the OK button. Click on the Partition button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
If you plan to partition this new drive then be sure you create a larger partition for TM than your old volume.
Next, clone your old TM volume:
Clone using Restore Option of Disk Utility
1. Open Disk Utility from the Utilities folder.
2. Select the destination volume from the left side list.
3. Click on the Restore tab in the DU main window.
4.Check the box labeled Erase destination.
5. Select the destination volume from the left side list and drag it to the Destination entry field.
6. Select the source volume from the left side list and drag it to the Source entry field.
7. Double-check you got it right, then click on the Restore button.
Destination means the external backup drive. Source means the internal startup drive.

HT201250 How can I migrate a Time Machine backup from an external hard drive to a new TimeCapsuls?

I just got a 2TB Time Capsule. I want to migrate my time machine backups on an external hard drive to the new Time Capsule. I have about 430Gb of files to back up; I don't want to wait 7-8 days for the backup, unless I have to. I am using OS 10.7.5 (forget which cat that is). I have mounted the TC drive as 10.0.1.1; I tried to drag and drop from old to "data" on TC, but I get the error "The volume is the wrong format for a backup." Any ideas how I can move my old files to the new, and bypass creating a brand new backup file?
Thanks.

Rather than do that, which means starting over from scratch, losing all your edits, organisation and so on, why not simply use iPhoto Library Manager to revert the Library to the older version? Easier, less destructive.
The instructions on that are here
If you really want to start over: you can access the Originals folder simply by going to your Pictures Folder and finding the iPhoto Library there. Right (or Control-) Click on the icon and select 'Show Package Contents'. A finder window will open with the Library exposed.

Time Machine backup? pictures and external hard drive

I know this question has been asked before but I just wanted to make sure of something. Does a basic Time Machine backup backup all photos? And also a real basic question-- Is a Apple Time Capsule the same as a external hard drive?

You can save the pictures in Time Machine backup.. that is not a problem and what the TC is designed for.
You cannot off load the pictures from the internal disk of the computer and use the Time Capsule as the drive for a running library.. that is when it will get corrupted.. if you need more space for a library use External drive that plugs in by USB or FW or Thunderbolt. And it must be formatted standard Mac OS extend journaled.. then Time Machine can backup the drive to the Time Capsule.
I should also use the language more carefully.. the TC is fine for files even of pictures.. but it is unsuitable for an iphoto library or aperture library. I am always assuming on a Mac when people talk about pictures then they mean a library.. but if you save raw pictures from the camera onto a TC directly that is fine. The only issue that then arises is no automated backups.. TC is not a NAS in the normal sense of the word.. Every NAS has a built automated backup.. TC does not. You also cannot backup files on the TC using TM.. it was designed as a Target for Time Machine backups Not as a source. There are other backup products that will work.. but then you will need to figure out where to back up file to.. and the worst possible place is the USB on the TC.

How can Time Machine backup automatically when your external hard drive isn't connected?

Everywhere I search, it says that Time Machine will automatically backup every 24 hours and so on.
However, I was wondering - how can these automatic backups take place if you are backing up to an external hard drive which is not always connected?
Is this to say that if you do not connect your external hard drive for a day, no backups will be done that day?
Thank you

If the drive is not connected then TM pauses until the drive becomes available. Yes, if the drive isn't connected then there are no backups.
A whole lot about Time Machine for help with TM problems. Also you can select Mac Help from the Finder's Help menu and search for "time machine" to locate articles on how to use TM. See also Mac 101- Time Machine.

HT201250 Can Time Machine backup files stored on external hard drive

Can Time Machine back up files that are stored on external hard drive and save them on a different external hard drive?
I have my pictures stored on an external hard drive connected to my iMac. I want to make an exact copy of the pictures folder on a separate external hard drive. Can Time Machine do that?
If yes, how?
If no, what's a good way to create a mirror of the folder on External Hard Drive #1 (the original) on External Hard Drive #2 (the backup)?
I am not opposed to manually copying every couple weeks or month, but (1) it's less convenient and (2) I got an error message the first time I tried this saying the files couldn't be copied because some of the files being copied had the same name as each other (not exactly that, I'm at work and don't have the message in front of me right now, but that was the gist of it).
Thanks!

1. Yes, if both drives are formatted as Mac OS Extended (Journaled).
2. Reformat the drives if needed, open the Time Machine pane of System Preferences, and remove the drive with the pictures from the list of items set to be excluded.
(110331)

HT201250 Time Machine backup of internal AND external hard drive

I have an iMac with an internal hard drive for everything BUT photos and music and an external hard drive for only photos and music. If I hook up a second external hard drive will Time MAchine back up both my external (music/photos) hard drive AND my internal hard drive?

You will be able to back up the external drive, but you will have to modify settings. Time Machine only makes backups of your OS X partition by default.
Open System Preferences > Time Machine > Options, and remove the external drive from excluded items, so it will be backed up. I recommend ot have your external drive formatted in "Mac OS Extended (Journaled)"

Time Machine Backup not possible (normal external Hard drive)

Hi,
has anyone else had the problem that after the Lion upgrade its not possible to even really access your external time machine?
i have a 1TB Samsung HD103SI Media and when it tries to boot up it wont show in finder, i can see it in the disk drive utility and try to repair it but it only gets me an error saying i have to reformat that drive?
i hope this can somehow be fixed otherwise all my backups are gone

Hi,
Sorry to hear about your Issue...
Was your Samsung Formatted to Mac OS Entended (journaled) when you first started using it with TM...?
If so see the Troubleshooting Section in this Link to Pondinis excellent Tips on Time Machine...
http://web.me.com/pondini/AppleTips/Index.html
Cheers,
You may also find the TM references in this Link of Interest...
http://web.me.com/pondini/AppleTips/LionChanges.html

Time Machine won't recognize new external hard drive

I recently had a problem with My Passport and had to buy a new one. I have plugged it in and reformatted it and now Time Machine won't recognize it even though it shows on my desktop and the disk utility doesn't see any problem. Any ideas?

Disable Time Machine from System Preferences.
Choose Select disk button, remove the old TM backup disk and add the new one.

HT201250 Time machine back up using a external hard drive connected to the Airport extreme

How can I setup a time machine back up using a external hard drive connected to the Airport extreme? Even better for time managment purposes I want to use the Eithernet Thunderbolt connection for the first back up and then through the wifi there after for daily routine Time Machine back ups.

You can attach a hard drive, but Time Machine backups to a drive at the USB port at the AirPort Extreme are not supported by Apple, so it's not possible to say what your actual results might be.
If you decide to try this, it would be wise to have a secondary backup plan in place as well.
http://docs.info.apple.com/article.html?path=Mac/10.6/en/15139.html

How can I copy a time machine backup from one Time Capsule to another ?

How can I copy a time machine backup from one Time Capsule to another ? I bought a 1 Tb Time Capsule to replace my 512Mb Time Capsule. Now, I like to copy my time machine backup from the old Time Capsule to the new one so I can keep using my backup.

from this support article:
(click on image to enlarge)

How can I get Time Machine to back up an external hard drive (iPhotos) that is attached to airport extreme base station. Note: Time machine is usb to macbook pro and external drive with iphotos is usb to airport extreme base station. Help please. Thanks!

How can I get Time Machine to back up an external hard drive (iPhotos) that is attached to airport extreme base station. Note: Time machine is usb to macbook pro and external drive with iphotos is usb to airport extreme base station. Help please. Thanks!

Once you have the drive connected to your Mac, click System Preferences (gear icon) on the dock
Click Time Machine
Click Options
Be default, the hard drive will be Excluded from backups. Click the drive to highlight it, then click the "-" (minus) button at the bottom of the list to remove the drive from Excluded items.
The drive will be backed up on the next Time Machine pass
Everything above assumes that the hard drive has been formatted in Mac OS Extended (Journaled) as Time Machine will only backup drives in that format.

I have a time machine backup file on a USB hard drive. I bought a time capsule / airport extreme, flat 3TB. I wish to transfer the backup file from the usb hard drive to the time capsule hard drive. 10.6.8

I have a time machine backup file on a USB hard drive. I bought a time capsule / airport extreme, flat 3TB. I wish to transfer the backup file from the usb hard drive to the time capsule hard drive. 10.6.8

Unfortunately, Time Machine backups that are stored on a drive that has been connected directly to a Mac are completely different than Time Machine backups that are stored on a Time Capsule.
Frankly, it is not worth the effort and trouble to try to transfer the old backups to the new Time Capsule.....my opinion....having done this in the past.
It is possible though, but I would not recommend it due to the complexity and downsides involved with this. To give you an idea of how to do this, check out this support article.
http://pondini.org/TM/18.html
Even if you transfer the "old" backups over to the Time Capsule successfully, Time Machine will not simply "add on" to the old backups.
Time Machine will make a new complete backup of your Mac and then add incremental backups from that point.
My advice.....start a new backup on the Time Capsule and move forward. Keep the USB hard drive around for a month, maybe 2 or 3 in case you need to go back to an old backup for some reason. At that time, you will not likely need the old backups at all since you will have a current 2-3 month history of new backups. At that point, you can erase the USB drive and use it for another purpose.

How Can I Migrate My Time Machine Backups To A New External Hard Drive?

Similar Messages

Maybe you are looking for