How can i minimize the export frame

I am trying to export my file and unfortunately I can't go down where it says "export" because it's not letting me. I have a Window PC and whenever I open panels, the framers are all the time big and I try to scroll down to press any button but it keeps going up and I don't know what to do.
How can I make the frame size smaller when I'm trying to export my file, and in order to press the export button to get it started? Please let me know asap I appreciate it!
Thank you!
Jackie M

If you can't increase the resolution of the laptop, if it's already at maximum and won't go higher, then you'll need a new laptop.
Personally, I recommend a desktop, though.  17" seems the large end of laptop screens, and that's rather small.  A nice 24" screen with 1920 x 1080 resolution is a good starting point, and you can't do that with a laptop.
Just my opinion.

Similar Messages

  • How can i minimize the deadlock for the below event

    <deadlock>
     <victim-list>
      <victimProcess
    id="process2ccd0c8"
    />
     </victim-list>
     <process-list>
      <process
    id="process2ccd0c8"
    taskpriority="0"
    logused="472"
    waitresource="RID: 7:1:301805:0"
    waittime="4729"
    ownerId="218717433"
    transactionname="implicit_transaction"
    lasttranstarted="2015-02-18T02:01:42.190"
    XDES="0x8ff01f078"
    lockMode="S"
    schedulerid="2"
    kpid="19796"
    status="suspended"
    spid="161"
    sbid="0"
    ecid="0"
    priority="0"
    trancount="1"
    lastbatchstarted="2015-02-18T02:01:42.197"
    lastbatchcompleted="2015-02-18T02:01:42.193"
    lastattention="1900-01-01T00:00:00.193"
    clientapp="Microsoft SQL Server JDBC Driver"
    hostname="xxxxxxxxxxxx"
    hostpid="0"
    loginname="xxxx"
    isolationlevel="read committed (2)"
    xactid="218717433"
    currentdb="7"
    lockTimeout="4294967295"
    clientoption1="671088672"
    clientoption2="128058">
       <executionStack>
        <frame
    procname="adhoc"
    line="1"
    sqlhandle="0x02000000f96c7e18b47b33db0c837f7598795780ea68c03a0000000000000000000000000000000000000000">
    SELECT LOC as LocationName, MATERIALUNITOFMEASURE,
    SUM(WMDLXK.DECODE(QTY_TYPE,'QA',QTY,0)) QUANTITY_ON_HAND,
    SUM(WMDLXK.DECODE(QTY_TYPE,'QP',QTY,0)) QUANTITY_ON_ORDER,
    SUM(WMDLXK.DECODE(QTY_TYPE,'QS',QTY,0)) QUANTITY_SOLD,
    SUM(WMDLXK.DECODE(QTY_TYPE,'--',QTY,0)) QUANTITY_ON_DEMAND,
    SUM(WMDLXK.DECODE(QTY_TYPE,'QO',QTY,0)) QUANTITY_OUT_OF_STOCK,
    SUM(WMDLXK.DECODE(QTY_TYPE,'QR',QTY,0)) QUANTITY_RECEIVED,
    SUM(WMDLXK.DECODE(QTY_TYPE,'--',QTY,0)) QUANTITY_REQUESTED,
    SUM(WMDLXK.DECODE(QTY_TYPE,'--',QTY,0)) QUANTITY_RETURNED,
    SUM(WMDLXK.DECODE(QTY_TYPE,'--',QTY,0)) ADJUSTMENT_INVENTORY_QTY
    FROM
    SELECT DISTINCT LOC_SDQ3 AS LOC, MATERIALUNITOFMEASURE, QTY_SDQ4 AS QTY, QTY_TYPE FROM WMDLXK.CDM_LOCATION_QUANTITY T WHERE LOC_SDQ3 IS NOT NULL AND EDI_BATCH_ID ='erh7ck009edns0ia00003pi92015 02 18 02:01:41'
    AND LINE_NUM ='1'
    UNION
    SELECT DISTINCT LOC_SDQ5 AS LOC,  MATERIALUNITOFMEASURE, QTY_SDQ6 AS QTY, QTY_TYPE FROM WMDLXK.CDM_LOCATION_QUANTITY T WHERE LOC_SDQ5 IS NOT NULL AND EDI_BATCH_ID ='erh7ck009edns0i   
    </frame>
        <frame
    procname="unknown"
    line="1"
    sqlhandle="0x0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000">
    unknown   
    </frame>
       </executionStack>
       <inputbuf>
    SELECT LOC as LocationName, MATERIALUNITOFMEASURE,
    SUM(WMDLXK.DECODE(QTY_TYPE,'QA',QTY,0)) QUANTITY_ON_HAND,
    SUM(WMDLXK.DECODE(QTY_TYPE,'QP',QTY,0)) QUANTITY_ON_ORDER,
    SUM(WMDLXK.DECODE(QTY_TYPE,'QS',QTY,0)) QUANTITY_SOLD,
    SUM(WMDLXK.DECODE(QTY_TYPE,'--',QTY,0)) QUANTITY_ON_DEMAND,
    SUM(WMDLXK.DECODE(QTY_TYPE,'QO',QTY,0)) QUANTITY_OUT_OF_STOCK,
    SUM(WMDLXK.DECODE(QTY_TYPE,'QR',QTY,0)) QUANTITY_RECEIVED,
    SUM(WMDLXK.DECODE(QTY_TYPE,'--',QTY,0)) QUANTITY_REQUESTED,
    SUM(WMDLXK.DECODE(QTY_TYPE,'--',QTY,0)) QUANTITY_RETURNED,
    SUM(WMDLXK.DECODE(QTY_TYPE,'--',QTY,0)) ADJUSTMENT_INVENTORY_QTY
    FROM
    SELECT DISTINCT LOC_SDQ3 AS LOC, MATERIALUNITOFMEASURE, QTY_SDQ4 AS QTY, QTY_TYPE FROM WMDLXK.CDM_LOCATION_QUANTITY T WHERE LOC_SDQ3 IS NOT NULL AND EDI_BATCH_ID ='erh7ck009edns0ia00003pi92015 02 18 02:01:41'
    AND LINE_NUM ='1'
    UNION
    SELECT DISTINCT LOC_SDQ5 AS LOC,  MATERIALUNITOFMEASURE, QTY_SDQ6 AS QTY, QTY_TYPE FROM WMDLXK.CDM_LOCATION_QUANTITY T WHERE LOC_SDQ5 IS NOT NULL AND EDI_BATCH_ID ='erh7ck009edns0  
    </inputbuf>
      </process>
      <process
    id="processabf1498"
    taskpriority="0"
    logused="41352"
    waitresource="RID: 7:1:301806:33"
    waittime="4766"
    ownerId="218712317"
    transactionname="implicit_transaction"
    lasttranstarted="2015-02-18T02:01:38.403"
    XDES="0x8ff87e568"
    lockMode="U"
    schedulerid="9"
    kpid="19044"
    status="suspended"
    spid="149"
    sbid="0"
    ecid="0"
    priority="0"
    trancount="2"
    lastbatchstarted="2015-02-18T02:01:42.190"
    lastbatchcompleted="2015-02-18T02:01:42.183"
    lastattention="1900-01-01T00:00:00.183"
    clientapp="Microsoft SQL Server JDBC Driver"
    hostname="xxxxxxxxxxm"
    hostpid="0"
    loginname="XXXX"
    isolationlevel="read committed (2)"
    xactid="218712317"
    currentdb="7"
    lockTimeout="4294967295"
    clientoption1="671088672"
    clientoption2="128058">
       <executionStack>
        <frame
    procname="adhoc"
    line="1"
    stmtstart="40"
    sqlhandle="0x02000000f91f4423850b7703e5697b611b66f2000795329b0000000000000000000000000000000000000000">
    DELETE  FROM WMDLXK.CDM_LOCATION_QUANTITY  WHERE EDI_BATCH_ID = @P0   
    </frame>
        <frame
    procname="unknown"
    line="1"
    sqlhandle="0x0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000">
    unknown   
    </frame>
       </executionStack>
       <inputbuf>
    (@P0 nvarchar(4000))DELETE  FROM WMDLXK.CDM_LOCATION_QUANTITY  WHERE EDI_BATCH_ID = @P0          
    </inputbuf>
      </process>
     </process-list>
     <resource-list>
      <ridlock
    fileid="1"
    pageid="301805"
    dbid="7"
    objectname="WMIDPEN2.WMDLXK.CDM_LOCATION_QUANTITY"
    id="lock827cedd00"
    mode="X"
    associatedObjectId="72057594062766080">
       <owner-list>
        <owner
    id="processabf1498"
    mode="X" />
       </owner-list>
       <waiter-list>
        <waiter
    id="process2ccd0c8"
    mode="S"
    requestType="wait" />
       </waiter-list>
      </ridlock>
      <ridlock
    fileid="1"
    pageid="301806"
    dbid="7"
    objectname="WMIDPEN2.WMDLXK.CDM_LOCATION_QUANTITY"
    id="lock4e67a3c00"
    mode="X"
    associatedObjectId="72057594062766080">
       <owner-list>
        <owner
    id="process2ccd0c8"
    mode="X" />
       </owner-list>
       <waiter-list>
        <waiter
    id="processabf1498"
    mode="U"
    requestType="wait" />
       </waiter-list>
      </ridlock>
     </resource-list>
    </deadlock>
    Please help me, How can i minimize the deadlock issue for this event

    Indexing improvements might greatly improve query performance and reduce likelihood of deadlock, but they are no guarantee to remove deadlocks.
    An additional strategy you might try is to serialise the queries. I am guessing that the SELECT and DELETE start at similar times getting IS and IX table locks respectively. Then the DELETE is escalating to a table X lock, for which it must wait for the
    IS lock to go. The SELECT query continues until it needs a record/page that is X locked by the DELETE statement. That would be a deadlock. For the DELETE, you might get a full table lock at the beginning of the query. ie try changing the DELETE to the following
    BEGIN TRANSACTION
    SELECT TOP 0 * FROM WMDLXK.CDM_LOCATION_QUANTITY WITH (TABLOCKX)
    DELETE  FROM WMDLXK.CDM_LOCATION_QUANTITY  WHERE EDI_BATCH_ID = @P0
    COMMIT TRANSACTION
    The SELECT in the query above will wait until it can get a full table X lock. No deadlock as it will wait for executing select queries to complete. Then the DELETE statement can execute within the full table X lock, so no deadlock there. At the COMMIT, the
    full table X lock is released and waiting SELECT queries can continue.
    Note: The SELECT queries will be slowed up (waiting for shared lock) while the DELETE executes. Are you OK with that? Actually, it is slightly worse, as a SELECT query might have to wait while the DELETE waits for its X lock, then wait while the DELETE executes.
    Hope that helps,
    Richard

  • "Other" and "Documents and Data" tabs? What is on them and how can I minimize the space they take up?

    Okay, so I plugged my phone in recently and I clicked the iPhone tab (force of habbit) and I took a look at the storage on my iPhone 4. The two largest tabs are the "Other" and "Documents & Data" tabs. What is on those tabs and how can I minimize the amount of space they take up?

    Hello, tayajoan. 
    Thank you for visiting Apple Support Communities. 
    Here is an article that provides more information regarding the "other" storage. 
    Other: Everything else, such as contacts, calendars, messages, emails and their attachments, Safari Offline Reading List, settings, and other system resources.
    iPhone, iPad, and iPod: Understanding capacity
    http://support.apple.com/kb/ht1867
    Cheers,
    Jason H. 

  • How do you minimize the export setting screen becuase mine is too big and I cant go on the export option

    how do you minimize the export setting screen becuase mine is too big and I cant go on the export option

    The export dialog is manipulated in the same way as any window.  If you don't have enough screen real estate to grab the edges of the dialog and change it's size, then you may need to work on a larger screen, or at least increase the display resolution of the screen you're on.

  • How do I change the export frame rate?

    How do I change the export frame rate?

    my video came out super twitchy when i exported it and was told i need to change to export frame rate.
    here is an 8 sec  clip of what i am talking about. 
    http://www.youtube.com/watch?v=cuQ5VduBUK
    where is quick time conversion
    sorry im kind of a noob
    still trying to figure everything out

  • How can I minimize the chance of MBP case bending? Case? Closing technique?

    How does one minimize the chances of their MBP case warping or bending? I don't have one yet, so I'm asking for your opinions on preventative type recs.
    Does it have something to do with the way everybody is closing their lid? Should we be using both hands to push down the lid on each edge, rather than grasping the center?
    What about a protective case? Any recommendations for a slim, but rugged case?

    It doesn't matter how you close it, though it might matter how you place it: upright in a bag might contribute more to warpage than flat on a table. I'd say the best way to keep it would be back-first into a bag (so the LED light is at the top of your bag) but I can't say if it'll help at all.
    Unless your mac warps so that you can't close it anymore I think it's something that happens at random, even if you take very good care of it. Mine is a bit warped, I learned to live with it. When to you really look at your closed macbook? At any other time the effect isn't visible.

  • How can I see the first frame of a clip in the Event Library

    I slate my shots for a reason, but when I am looking in the Event Library I see a random frame a couple of seconds in to the clip instead of the first frame, how can I set it so I can see the first frame?
    Thanks in advance

    Switch to filmstrip view and zoom in.

  • Since the latest version of itunes, my playlists are "too large" to fit on the computer screen.  I can no longer scroll down because the far right side of the screen is too far over.  How can I minimize the screen or be able to scroll down my list?  Thx!

    Since the latest version of itunes, my playlists are too large to fit on the screen. The left side, with all my playlists is still there, but  I can no longer scroll down the chosen playlist as the far right is no longer accessible.  Any suggestions on how to minimize the list?  Thanks.

    I have the same problem on the latest iTunes software and Windows 7. My window is maximzed and I do not see any tab for photos. Seems related to a recent update (IOS7?) as this was there - at least before the very big change to the interface.

  • How can i change the last frame in a trailer i have converted.  everything else is fine but the wording is wrong on the final "credits" and don't know how to edit after converting it to a project.  Thanks to All.

    looking to edit the final frame which is the the "credits" section.  I have already  converted the trailer.  Is it too late to correct some nserts in the credits?
    Thanks to all.

    If by "converted" you mean that you've converted the trailer to a normal project using the menu option File>Convert to Project, then YES it is still possible to edit the Credits Title.
    In the converted project, double-click on the blue Title bar that sits above the background clip. In the Viewer, double-click on the text you wish to change (or highlight text by dragging over it). Now you can replace the highlighted text by typing in the new text. You can also change fonts and font colours.
    It's always good practice to duplicate the Trailer before converting it. To do this, while in Project Library view, click on the Trailer name in the Library then select File>Duplicate Project. A copy will appear in the Library with the same name as the Trailer, but with the number 1 appended. You can rename this copy as desired. Now, convert the duplicate to a standard project and continue with your editing as required. You now have the original Trailer in template form (which can be further edited), and can duplicate it again if required.
    John
    EDIT: Regarding my first sentence - just noticed that you did mention "converting it to a project" in you topic header. Sorry!
    Message was edited by: John Cogdell

  • How can i minimize the iTunes screen to see the files in my external hard drive to enable me to compare files to see if all have been transferred to iTunes?

    how can i compare music files on my external hard drive to my iTunes library?

    how can i compare music files on my external hard drive to my iTunes library?

  • How can you control the export types from DHTML output?

    I am currently using the JRC from CR4E V1 patch 7.
    When I generate a report as DHTML and use the export button I am presented with 5 export options:
    Crystal Reports
    Adobe Acrobat
    Microsoft Word - Editable
    Rich Text Format
    Comma Separated Values
    I would like to control which of the 5 options are presented to the user.  I was looking in the crystalreportviewers115 folder for some JavaScript  that could be edited.  I found export.js which appeared to have code that was creating the choices for a dropdown (getFormatDropdownList()), however this code did not get executed when I ran the export.
    Any help would be appreciated.
    Thanks,
    Richard

    Yes - the JavaScript that's in export.js was rolled into inline code in the Java jar files sometime during version 11.5.
    It's no longer customizable.
    An option is to use HTTP Filter on your Java Web App to modify the outgoing JavaScript instream, but that's never a pretty solution.
    Sincerely,
    Ted Ueda

  • How can I display the first frame of my video as opposed to a blank screen?

    hy as write in the title I would display a frame of my video instead blank screen...
    this the code that i've implemented...
    could you help me pls
    ciao
    a
    <div id="flvplayer">
            <object id="myFlvPlayer" classid="clsid:D27CDB6E-AE6D-11cf-96B8-444553540000" width="200" height="200">
            <param name="movie" value="../flv_player/player.swf" />
            <!--[if !IE]>-->
            <object type="application/x-shockwave-flash" data="static/org_minervaeurope_museoweb/flv_player/player.swf" width="200" height="200">
            <!--<![endif]-->
            <param name="allowfullscreen" value="true" />
            <param name="autostart" value="false" />
            <param name="flashvars" value="&file=../../../MW/mediaArchive/Video/caracallaPAL55.flv&autostart=false&restart=tr ue" />
                <!--[if !IE]>-->
            </object>
            <!--<![endif]-->
        </object>
    </div>

    Switch to filmstrip view and zoom in.

  • How can I reactivate the Export function in iPhoto '11?

    So, I tried to download a program that would let me export photos directly to Tumblr, and that program didn't seem to do anything when I installed it, but now NOTHING HAPPENS when I click "export."  The usual pop-up window is gone.  Help, please!

    Remove whatever you installed.
    Regards
    TD

  • How can I change the gray frame?

    Are there themes for Safari? I am used to being able to download a zillion themes for FireFox. I don't miss that so much, if I could just change the COLOR. I hate grey - it's a depressing color.

    I have the same gripe. Safari 3.1 frame on my Windows XP Home is a dark grey and the print is practically indistinguishable; it's difficult to read.
    I checked in the Preferences but didn't find a solution.

  • How can we take the incremental export using the datapump at schema level.

    Hi,
    How can we take the incremental export using the datapump at schema level. Example, today i had taken the full export of one schema.
    After 7 days from now , how can i take the export of change data , from the data of my full export.
    using the export datapump parameter - FLASHBACK_TIME ,can we mention the date range. Example sysdate - (sysdate -7)
    Please advice
    thanks
    Naveen.

    Think of the Data Pump Export/Import tools as taking a "picture" or "snapshot."
    When you use these utilities it exports the data as it appears (by default) while it's doing the export operation. There is no way to export a delta in comparison to a previous export.
    The FLASHBACK_TIME parameter allows you to get a consistent export as of a particular point in time.
    I recommend you go to http://tahiti.oracle.com. Click on your version and go to the Utilities Guide. This is where all the information on Data Pump is located and should answer a lot of your questions.

Maybe you are looking for

  • VGA and S-video

    Can I use both a VGA device and a S-Video device at the same time? Anyone know of a workaround on this?? Thanks!!

  • Optimize Clob concatenation

    Hi, I have a stored proc that return a string containing a concatenation of the result of a select on a unique column. The code is about the following : CREATE OR REPLACE PROCEDURE pGetAllProductSpec (ProdId in Varchar2 , CaracLob out clob) IS len BI

  • How do i get mac to see mouse

    I installed snow leopard 10.6.8 and now my mac does not see my cordless logitech mouse. Need a little help here.

  • Wired connecting through a wireless router

    I have a WRT54GS (version 7) wireless router with speedboost.  My computer is an HP Pavillion laptop.  I get my internet access through Cox Cable and they provided me with a Motorola SB5101 Surfboard cable modem. When I set up my router everything se

  • Cannot connect: ORA-12505 error (listener does not know SID..)

    I have an Oracle 10g installation insde a VM with private IP (192.168.109.128) and I'm trying to access it from the host operating system with aqua data studio, but get ORA-12505 error (listener does not currently know of SID...). The identical error