How can i modifty the schedule of a Job in R3

Hi all,
i must modify the Schedule and the Variant of a job in R3, whats the transacction? i just know the name of the Job "JOB COSTOS FLEXIBLES", whats the first step? i m looking for this job in the SM36 but doesnt appear to modify, just tocreate new one, but i dont want this, i want modify the schedule and the variant, please help guys

Place cursor (mouse) on the job name in SM36 or SM37 and hit Ctrl + F11.

Similar Messages

  • Help with : How Can I know the schedule for a JOB, and How Can I Change?

    Hi
       I have a job and I know the name...I review in table TBTCO and I saw that this jobs is schedule at 11:00 AM and at 4:00 PM, but I need to change the schedule for this job..and that this job will execute al least four times during the day...I don´t know how can I change the schedule??
        I was thinking that if I  run the transaction directly I can run, Im not sure, because I try to do in QAS environment... I when I try to run the program..the system doesn´t do anything..this mean I cant execute with F8, such as if I should be complete a parameter, but all the fields are completed.
         Thank you for your help, I promese that I will gice you points for your help.
    Alice

    Thank you at all.
    I was reviewing the options that you send me, but Im confused about... if its possible edit the schedule that this job has in this moment, because if I enter the transaction SM36 or try to see SM37..in production environment I can´t see this schedule...
    And Im not sure to do the correct steps to create something new... in QAS environment..I can´´t see this job.
    All of yours help are really important
    Thank you again!
    Alice

  • How can you get the schedule of a single reoccurring job with Restart ability in Redwood to pause when it has failed...?

    We need the Request Restart ability when scheduling a single reoccurring job in Redwood. Most of our jobs are scheduled in CHAINs which offers the Final Status Handler on Step level, and the schedule is "paused" when a job in the CHAIN has failed ( the next instance does not populate until the OP MSG has been Replied to) , and once the OPERATOR message is replied to, the CHAIN can resume running again ( desired ) . But we need this same ability when scheduling a single job not in a CHAIN. In our testing, we set up a job with Request Restart chosen on the Error , Killed and Unknown selections on the Restart Behavior Tab. But we found when a job is scheduled say once a day at 8AM, and when it fails, an OPERATOR msg appears allowing a Restart choice ( desired), but the next day's schedule also populates ( undesired) and we do NOT want the schedule to continue on yet because we need a chance to fix the error before the next insance runs for business reasons. So how can you get the schedule of a single reoccurring job with Restart ability in Redwood to pause when it has failed...?

    Hello Fran,
    You can wrap the job chain in a master job chain in the first step and set the final status handler there.
    You can also set the Restart Behavior to 'Stop Submit Frame', in that case you will have to resubmit the job once you are finished troubleshooting.
    Regards Gerben

  • How can I check the all schedule CM jobs' time?

    Dear all:
    How can I check the all schedule CM jobs' schedule time?
    my environment is : EBS 11.5.9 | DB:ORACLE 9.2.0.8 | PLATFORM: LINUX redhat 4.0*
    Regards
    Terry
    Edited by: Terry Chen on 2010/4/14 下午 7:12

    Terry,
    Please see (Note: 170107.1 - How to Determine Scheduled Concurrent Requests).
    Regards,
    Hussein

  • How can I share my schedule information with my wife on her accounts and devices?

    My wife and I have separate accounts in our MacMini and MacBook.  We each have an iPhone.  She uses GMail.  I use Mac Mail.  How can I share my schedule information with my wife on her accounts and devices?

    It is not advisable to follow the above suggested method. The following will do what you want without complications.
    1. On your Mac, go to http://help.apple.com/icloud/#mm6b1a9479 and follow the instructions to share a calendar privately. If you have more than one calendar you want to share you will have to do each individually. You can choose whether she is able to edit it or whether it should be read-only.
    2. If your wife does not have an iCloud account she will need to obtain one. When you share a calendar and nominate her to access it she will receive and email. All she has to do is to open the email and click 'Join Calendar'. This will add the calendar to her Calendar app on all devices and on icloud.com without affecting any other data. Again, this will have to be done individually if more than one calendar is involved.

  • How can i get the SMTP IP address for gmail

    Hello,
    sapian,
              I want to schedule a webi document through BI Launch Pad to users email address gmail.So while configuring the AdaptiveJobServer in CMC i need to give SMTP details such as
    Domain name:
    Host:
    Port:
    So for scheduling a webi document to a gmail user i need the above details for gmail SMTP server.Can any one suggest me how can i get the above details for gmail SMTP server.
    Thanks in advance.
    Regards,
    Kishor Kumar S

    Hi Hrishikesh,
    i have configured the 'stunnel.conf' file with the following details
    accept  =static ip address of the machine colon port number where the stunnel is installed
    connect = smtp.gmail.com:465
    and i saved the file.
    when i go to
    Start->Stunnel->service install
    it is giving error as follows
    Error binding ssmtp to (ip address and port number which i have given in stunnel.conf file 'accept')
    bind: No error (0)
    Can you suggest me the solution for the above error.
    Thanks in advance,
    Regards,
    Kishor

  • How can I save the images to the iPhone anywhere

    Hello  I own Time capsule 3 tb. How can I save the images to the iPhone anywhere in Time capsule
    note i used fileexplorer when Outside the home isee Outside Message " error connection failed with the error operation time out "
    Thanks

    Most Simple Back Up:
    Drag the iPhoto Library from your Pictures Folder to another Disk. This will make a copy on that disk.
    Slightly more complex: Use an app that will do incremental back ups. This is a very good way to work. The first time you run the back up the app will make a complete copy of the Library. Thereafter it will update the back up with the changes you have made. That makes subsequent back ups much faster. Many of these apps also have scheduling capabilities: So set it up and it will do the back up automatically.
    Example of such apps: Chronosync - but there are many others. Search on MacUpdate or the App Store
    If you want to back up the Photos only:
    Export them using the File -> Export command.
    This User Tip
    https://discussions.apple.com/docs/DOC-4921
    has details of the options in the Export dialogue.

  • How can I access the namedCache

    Hi,
    As you know we can access the Oracle Coherence cache within CEP by using setMap procedure. This procedure only gives us a Map object. And we can load the coherence cache with this map object.
    But we should get the memberId and memberName of the coherence server for each node. How can I get the coherence member information(memberid, membername) that currently I am using?
    I am using below piece of code to get member Id but we got an error at the bottom of the page. The piece of code is :
        public void setMap(Map map)
             galataCache = map;
             NamedCache cache = CacheFactory.getCache("galataCustomerCache");
             cache = (NamedCache) map;
             CacheService service = cache.getCacheService();
             Cluster cluster = service.getCluster();
             Member memberThis = cluster.getLocalMember();
             Global.LOG.info("My Member id is:"+memberThis.getId());
             Global.LOG.info("My Member machine id is:"+memberThis.getMachineId());
             Global.LOG.info("My Member name is:"+memberThis.getMemberName());
        }And Oracle CEP server gives this error :
    ####<Jan 11, 2011 10:17:59 PM EET> <Info> <org.springframework.beans.factory.support.DefaultListableBeanFactory> <> <myServer> <[ACTIVE] ExecuteThread: '11' for queue: 'weblogic.kernel.Default (self-tuning)'> <> <> <> <1294777079117> <BEA-000000> <Destroying singletons in org.springframework.beans.factory.support.DefaultListableBeanFactory@21a6abab: defining beans [CacheBeanFactoryPostProcessor,ServiceDependencyBeanFactoryPostProcessor,ContextLifecycleControlBean,com.bea.wlevs.spring.BeanPostProcessorServiceProcessor,com.bea.wlevs.spring.EventTypeRepositoryFactoryBean#0,com.bea.wlevs.spring.CachingSystemFactoryBean#coherence_provider#0,galataCache,customerCacheLoader,wlevs_stage_proxy_forgalataCustomerCache,wlevs_stage_proxy_forgalataCustomerCachedefaultcachestage,galataCustomerCache,com.bea.wlevs.spring.support.ServiceInjectionBeanPostProcessor,org.springframework.osgi.extensions.annotation.ServiceReferenceInjectionBeanPostProcessor,com.bea.wlevs.spring.ApplicationIdentityAwareProcessor,com.bea.wlevs.spring.MBeanRegistrationBeanPostProcessor,com.bea.wlevs.spring.WorkManagerPostProcessor,com.bea.wlevs.spring.CacheBeanPostProcessor,com.bea.wlevs.spring.ActivationBeanPostProcessor,com.bea.wlevs.spring.BlockingSenderBeanPostProcessor,com.bea.wlevs.spring.RunnableBeanPostProcessor,com.bea.wlevs.spring.DisposableBeanPostProcessor,com.bea.wlevs.spring.ResourceInjectionBeanPostProcessor]; root of factory hierarchy>
    ####<Jan 11, 2011 10:17:59 PM EET> <Info> <OSGiLogReaderAdapter> <> <myServer> <Log Event Dispatcher> <> <> <> <1294777079119> <BEA-000000> <Bundle[214] GalataCoherence4, Message (ServiceEvent UNREGISTERING null), Exception (null), Time (1294777079118)>
    ####<Jan 11, 2011 10:17:59 PM EET> <Error> <Deployment> <> <myServer> <[ACTIVE] ExecuteThread: '11' for queue: 'weblogic.kernel.Default (self-tuning)'> <> <> <> <1294777079121> <BEA-2045010> <The application context "GalataCoherence4" could not be started: org.springframework.beans.factory.BeanCreationException: Error creating bean with name 'customerCacheLoader' defined in URL [bundleentry://214.fwk539854707/META-INF/spring/CoherenceCustomer.context.xml]: Error setting property values; nested exception is org.springframework.beans.PropertyBatchUpdateException; nested PropertyAccessExceptions (1) are:
    PropertyAccessException 1: org.springframework.beans.MethodInvocationException: Property 'map' threw exception; nested exception is (Wrapped: Failed to load the factory) java.lang.reflect.InvocationTargetException
    org.springframework.beans.factory.BeanCreationException: Error creating bean with name 'customerCacheLoader' defined in URL [bundleentry://214.fwk539854707/META-INF/spring/CoherenceCustomer.context.xml]: Error setting property values; nested exception is org.springframework.beans.PropertyBatchUpdateException; nested PropertyAccessExceptions (1) are:
    PropertyAccessException 1: org.springframework.beans.MethodInvocationException: Property 'map' threw exception; nested exception is (Wrapped: Failed to load the factory) java.lang.reflect.InvocationTargetException
         at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.applyPropertyValues(AbstractAutowireCapableBeanFactory.java:1279)
         at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.populateBean(AbstractAutowireCapableBeanFactory.java:1010)
         at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.doCreateBean(AbstractAutowireCapableBeanFactory.java:472)
         at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory$1.run(AbstractAutowireCapableBeanFactory.java:409)
         at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.createBean(AbstractAutowireCapableBeanFactory.java:380)
         at org.springframework.beans.factory.support.AbstractBeanFactory$1.getObject(AbstractBeanFactory.java:264)
         at org.springframework.beans.factory.support.DefaultSingletonBeanRegistry.getSingleton(DefaultSingletonBeanRegistry.java:222)
         at org.springframework.beans.factory.support.AbstractBeanFactory.doGetBean(AbstractBeanFactory.java:261)
         at org.springframework.beans.factory.support.AbstractBeanFactory.getBean(AbstractBeanFactory.java:185)
         at org.springframework.beans.factory.support.AbstractBeanFactory.getBean(AbstractBeanFactory.java:164)
         at org.springframework.beans.factory.support.DefaultListableBeanFactory.preInstantiateSingletons(DefaultListableBeanFactory.java:429)
         at org.springframework.context.support.AbstractApplicationContext.finishBeanFactoryInitialization(AbstractApplicationContext.java:729)
         at org.springframework.osgi.context.support.AbstractDelegatedExecutionApplicationContext.access$1600(AbstractDelegatedExecutionApplicationContext.java:69)
         at org.springframework.osgi.context.support.AbstractDelegatedExecutionApplicationContext$4.run(AbstractDelegatedExecutionApplicationContext.java:355)
         at org.springframework.osgi.util.internal.PrivilegedUtils.executeWithCustomTCCL(PrivilegedUtils.java:85)
         at org.springframework.osgi.context.support.AbstractDelegatedExecutionApplicationContext.completeRefresh(AbstractDelegatedExecutionApplicationContext.java:320)
         at org.springframework.osgi.extender.internal.dependencies.startup.DependencyWaiterApplicationContextExecutor$CompleteRefreshTask.run(DependencyWaiterApplicationContextExecutor.java:139)
         at org.springframework.scheduling.commonj.DelegatingWork.run(DelegatingWork.java:62)
         at weblogic.work.commonj.CommonjWorkManagerImpl$WorkWithListener.run(CommonjWorkManagerImpl.java:196)
         at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:528)
         at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
         at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
    Caused By: org.springframework.beans.PropertyBatchUpdateException; nested PropertyAccessExceptions (1) are:
    PropertyAccessException 1: org.springframework.beans.MethodInvocationException: Property 'map' threw exception; nested exception is (Wrapped: Failed to load the factory) java.lang.reflect.InvocationTargetException
         at org.springframework.beans.AbstractPropertyAccessor.setPropertyValues(AbstractPropertyAccessor.java:104)
         at org.springframework.beans.AbstractPropertyAccessor.setPropertyValues(AbstractPropertyAccessor.java:59)
         at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.applyPropertyValues(AbstractAutowireCapableBeanFactory.java:1276)
         at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.populateBean(AbstractAutowireCapableBeanFactory.java:1011)
         at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.doCreateBean(AbstractAutowireCapableBeanFactory.java:472)
         at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory$1.run(AbstractAutowireCapableBeanFactory.java:409)
         at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.createBean(AbstractAutowireCapableBeanFactory.java:380)
         at org.springframework.beans.factory.support.AbstractBeanFactory$1.getObject(AbstractBeanFactory.java:264)
         at org.springframework.beans.factory.support.DefaultSingletonBeanRegistry.getSingleton(DefaultSingletonBeanRegistry.java:222)
         at org.springframework.beans.factory.support.AbstractBeanFactory.doGetBean(AbstractBeanFactory.java:261)
         at org.springframework.beans.factory.support.AbstractBeanFactory.getBean(AbstractBeanFactory.java:185)
         at org.springframework.beans.factory.support.AbstractBeanFactory.getBean(AbstractBeanFactory.java:164)
         at org.springframework.beans.factory.support.DefaultListableBeanFactory.preInstantiateSingletons(DefaultListableBeanFactory.java:429)
         at org.springframework.context.support.AbstractApplicationContext.finishBeanFactoryInitialization(AbstractApplicationContext.java:729)
         at org.springframework.osgi.context.support.AbstractDelegatedExecutionApplicationContext.access$1600(AbstractDelegatedExecutionApplicationContext.java:69)
         at org.springframework.osgi.context.support.AbstractDelegatedExecutionApplicationContext$4.run(AbstractDelegatedExecutionApplicationContext.java:355)
         at org.springframework.osgi.util.internal.PrivilegedUtils.executeWithCustomTCCL(PrivilegedUtils.java:85)
         at org.springframework.osgi.context.support.AbstractDelegatedExecutionApplicationContext.completeRefresh(AbstractDelegatedExecutionApplicationContext.java:320)
         at org.springframework.osgi.extender.internal.dependencies.startup.DependencyWaiterApplicationContextExecutor$CompleteRefreshTask.run(DependencyWaiterApplicationContextExecutor.java:139)
         at org.springframework.scheduling.commonj.DelegatingWork.run(DelegatingWork.java:62)
         at weblogic.work.commonj.CommonjWorkManagerImpl$WorkWithListener.run(CommonjWorkManagerImpl.java:196)
         at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:528)
         at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
         at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
    >
    ####<Jan 11, 2011 10:17:59 PM EET> <Info> <OSGiLogReaderAdapter> <> <myServer> <Log Event Dispatcher> <> <> <> <1294777079123> <BEA-000000> <Bundle[214] GalataCoherence4, Message (BundleEvent STOPPED), Exception (null), Time (1294777079123)>
    ####<Jan 11, 2011 10:17:59 PM EET> <Info> <OSGiLogReaderAdapter> <> <myServer> <Log Event Dispatcher> <> <> <> <1294777079124> <BEA-000000> <Bundle[214] GalataCoherence4, Message (BundleEvent UNRESOLVED), Exception (null), Time (1294777079124)>
    ####<Jan 11, 2011 10:17:59 PM EET> <Info> <OSGiLogReaderAdapter> <> <myServer> <Log Event Dispatcher> <> <> <> <1294777079124> <BEA-000000> <Bundle[214] GalataCoherence4, Message (BundleEvent UNINSTALLED), Exception (null), Time (1294777079125)>
    ####<Jan 11, 2011 10:17:59 PM EET> <Notice> <Deployment> <> <myServer> <[ACTIVE] ExecuteThread: '11' for queue: 'weblogic.kernel.Default (self-tuning)'> <> <> <> <1294777079124> <BEA-2045001> <The application bundle "GalataCoherence4" was undeployed successfully>
    ####<Jan 11, 2011 10:17:59 PM EET> <Warning> <com.bea.wlevs.cluster.gbcast.support.AbstractBroadcastGroup> <> <myServer> <Invocation:com.bea.wlevs.cluster.coherence.BroadcastTxInvocationService> <> <> <> <1294777079124> <BEA-000000> <AtomicGroupBroadcastListener.onCommit [[email protected]54] threw an exception
    java.lang.IllegalStateException: Deployment transaction could not be completed, the local deployment failed
         at com.bea.wlevs.deployment.cluster.ClusterDeploymentListener.onPrepare(ClusterDeploymentListener.java:63)
         at com.bea.wlevs.cluster.gbcast.support.AbstractBroadcastGroup.prepareTxInternal(AbstractBroadcastGroup.java:302)
         at com.bea.wlevs.cluster.coherence.BroadcastGroupImpl$BroadcastTransactionImpl.run(BroadcastGroupImpl.java:407)
         at com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.InvocationService.onInvocationRequest(InvocationService.CDB:10)
         at com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.InvocationService$InvocationRequest.onReceived(InvocationService.CDB:40)
         at com.tangosol.coherence.component.util.daemon.queueProcessor.service.Grid.onNotify(Grid.CDB:136)
         at com.tangosol.coherence.component.util.Daemon.run(Daemon.CDB:42)
         at java.lang.Thread.run(Thread.java:619)
    >

    The easiest way (in my opinion) would be to implement the com.bea.wlevs.ede.api.cluster.GroupMembershipListener Interface. Anytime there is a membership change (which includes initial startup of a CEP application on a clustered server) the onMembershipChange() method is invoked. Example:
    @Override
    public void onMembershipChange(Server localIdentity, Configuration groupConfiguration) {
    int serverID = localIdentity.getIdentity();
    int coordID = groupConfiguration.getCoordinator().getIdentity;
    In this example, "serverID" is the local server's ID, and the "coordID" is the ID of the primary server for the cache cluster. This would be invoked at startup, and each time there is a cluster membership change.
    You would need to import the following:
    com.bea.wlevs.ede.api.cluster.GroupMembershipListener
    com.bea.wlevs.ede.api.cluster.Configuration
    com.bea.wlevs.ede.api.cluster.Server
    Hope this helps. See http://download.oracle.com/docs/cd/E14571_01/apirefs.1111/e14303/com/bea/wlevs/ede/api/cluster/GroupMembershipListener.html
    --Jim Leary
    Edited by: Jim Leary on Jan 11, 2011 12:51 PM
    Edited by: Jim Leary on Jan 11, 2011 12:57 PM

  • How can I get the No. of package and requesting system name in user exit?

    Dear all,
    Is there anybody knowing how to obtain the extracting package number and requesting system name in the user exit "EXIT_SAPLRSAP_002" ? here is detail on my questions as below:
    For package number. If extracting 100,000 records of 0MATERIAL_TEXT , and the package size is 20,000, then there are 10 packages, when executing the user exit, how can I know which package I am extracting on?
    For requesting name, when executing the user exit, how can I know the logical system name from which the extraction request is sent?
    Thanks.
    best regards
    Patrick

    Hi Mansi,
    Thanks for your quick response.
    The background of this requirement is, in the datasource 0material_Plant_Att, we added two fields in the extraction structure, one is variable price, another is previous year's variable price, which need to be obtained by searching data KEKO & CKIS in the user exit, these tables have the huge data volume, in each data package, the user exit needs to be executed once, so the heavy searching needs to be done once, consequently, the total running time of this request including several data packages is very long. In order to improve the performance, we design the following logic:
    1. Create the temporary tables YCKIS & YKEKO in R/3.
    2. Run BW request in BIW.
    3. In R/3, If this is first data package of this request, delete all data in YCKIS & YKEKO, then search the data from CKIS & KEKO ( Average 20 million records), then insert these data into YCKIS & YKEKO ( Average 0.2 million records). 
    4. In R/3, if this is not first data package of this request, then search the data directly from YCKIS & YKEKO.
    You can see in the above, in the step 4, the data searching performance can be improved significantly due to reading data from temporary table, this is why I need to know the No. of data package. In addition, apparently, it can not be done in BIW side since the performance issue is in the user exit rather than in BIW. Also it is very difficult to setup one counter to deliver this since we do not know when to reset the counter. For example,
    - Assuming there are 3 data packages.
    - 1st day, we schedule one request from BIW, in R/3,
       -> At 1st package, counter = 0+1=1
       -> At  2nd package, counter =1+1= 2.
       -> At 3rd package, counter = 2+1= 3, then reset counter = 0 for next request.
    Question 1:  How can we know the 3rd package is last one?
    Question 2: If during the 2nd package, the extraction job is cancelled exceptionally, the counter value is 2 not 0, then for the next request, the data searching is not correct, right.
    Hope the above is clear, and apology this email is too long.
    Thanks.
    best regards
    Patrick

  • How can I get the X and Y coordinates of an object in Xcode, ApplescriptObjc?

    How can I get the value of a specified object's X and Y coordinates in Xcode, using ApplescriptObjc? I'm hoping for something like:
    myObject's currentPosition()
    // Which would return {150, 100} for the X and Y of that object.

    Actually this is straight from basic physics
    Assuming that the x and y values you get using that AppleScript/Objective-C code is accurate, to move the object you would do
    set x to x + dx * speed
    set y to y + dx * speed
    with dx and dy being an integer with a value of -1 or 1 which indicates the direction the object is moving. Remember the origin in OS X is the middle of the frame or screen with positive x and y values moving to the upper right quadrant, and negative x and y values moving to the lower left. Your basic Cartesian coordinate system. Speed is also an interger and models the speed of the object.
    Once you've set x and y to their new values you would write  them back to the object.
    This is so I can find how much distance (in pixels) is being travelled when I animate an object to move from one position to another, to apply it to my desired velocity (of pixels per second), to find out how long the object should take to move.
    This part has got me stumped.
    To make an object move you need to change its x and y coordinates. To get smooth animation you need to change them on a regular schedule at a rate fast enough to avoid jerky motion. Given the refresh rate of most monitors and other factors a rate of 60 times per second gives good results. Between each tick of the clock you change the x and y coordinates by some amount, the size of the amount will model speed. Add a small change and the object moves slowly, add a big amount and the object moves quickly. Keep the amount of change constant and the object will move at a constant speed. Increase (or decrease) the amount of change between each tick and the object will accelerate (or decelerate)

  • How can reduce PO re-schedule in recommendations in ASCP

    How can reduce PO re-schedule in recommendations in ASCP.
    Presently we are in un-constraint plan and run ASCP plan weekly. Lot of re-schedule recommendation come in ASCP our supplier was confused they are unable to respond as weekly change in need by date.
    Please suggest How can reduce PO re-schedule recommendations?
    My E-mail ID is [email protected]
    regards
    Mukeshb
    Edited by: user9081379 on Aug 11, 2012 3:57 AM

    Hi,
    You can use Planning time fence (PTF) to reduce the nervousness in your system. Having a reasonable PTF (item-org level) will ensure that there are no sudden changes in the plan - hence lesser re-schedules.
    Also, use order modifiers, if possible.
    Hope this helps.
    Thanks,
    Devesh A.

  • How can I get the data and store the data dynamically generated?

    When I entered an order, after the information for the order has been filled in, an order number has been generated dynamically. I want to record this number to my databank.
    The questions are, 1\how can I record the order number? 2\How can I write it back to my databank?
    I noticed Openscript_User_100 had asked the similar question, the post is here,
    Openscript - How to save data to Data bank at runtime
    Openscript - How to save data to Data bank at runtime
    Can Openscript_User_100 or somebody else be more specific on how to do that?
    Can I use the forms.textField.storeAttribute to do that? Where can I find the example for forms.textField.storeAttribute?

    Thanks aamat!
    I tried to look for the orderID in the detail pane HTML, I only have a screen shot in the Detail pane (Is this Detail Pane found in View-Details？） I can see the orderID on the screen shot (there is no other tab Screenshot is the only tab) but I cannot select it and replace it with variable.
    The only place I can select the orderID is in the Java Code,somehow the orderId is recorded there. Please see the code below.
    (I changed"[" to "{" in order to show the code correctly)
    beginStep("{11} Sales Orders (15371) - XXXX Customer", 0);
              forms.captureScreenshot(229);
                   think(8.39);
              forms.textField(230, "//forms:textField{(@name='ORDER_SOLD_TO_0')}")
                        .setFocus();
                   think(0.812);
              forms.window(231, "//forms:window{(@name='ORDER')}").selectMenu(
                        "Tools|Scheduling");
         endStep();
    Can you advise further?
    Edited by: DorothyLi on Dec 15, 2009 11:21 AM

  • How can I save the images and movies on a  external Disk from iphoto program, to protect the images when problems occur in the laptop,

    How can I save the images and movies on a  external Disk from iphoto program, to protect the images when problems occur in the laptop,

    Most Simple Back Up:
    Drag the iPhoto Library from your Pictures Folder to another Disk. This will make a copy on that disk.
    Slightly more complex: Use an app that will do incremental back ups. This is a very good way to work. The first time you run the back up the app will make a complete copy of the Library. Thereafter it will update the back up with the changes you have made. That makes subsequent back ups much faster. Many of these apps also have scheduling capabilities: So set it up and it will do the back up automatically.
    Example of such apps: Chronosync - but there are many others. Search on MacUpdate or the App Store
    If you want to back up the Photos only:
    Export them using the File -> Export command.
    This User Tip
    https://discussions.apple.com/docs/DOC-4921
    has details of the options in the Export dialogue.

  • How can u know the process chain total time, individual time?

    Hi guru's
    How can u know the process chain total time, individual time?
    and what options will available in sm37?
    Thanks
    prabha reddy

    Hi Prabha
    Iam not very sure about total time and individual times.
    But you can go to tcode rspcm for monitoring the daily process chains. it gives you details like 1. status  2.start date & time  3. Log ID  of each process chain.
    or you can go to log view of particular individual chain to know how long it has run.
    SM37: tcode for simple job selection.
    here you check the status of job.
    you can select for certain conditions like
    1. scheduled
    2. released
    3. ready
    4.active
    5. cancelled
    Assign points if it was helpful
    Revert back if you need further info/
    regards
    AP

  • How can I enable the Special Stock Indicator in the source list?

    Hello Gurus,
    How can I enable the Special Stock Indicator in the source list? This can be found in the Maintain source list detail screen, source group and beside the order unit. Even I am in the create or in change mode, still the indicator can't change
    Thanks!

    OSS note 668764 explains that the special stock indicator field is a display only field and cannot be changed in the source list. it is only taken over from a scheduling agreement.

Maybe you are looking for