How can I modify bullets or create my own in Keynote

I looked everywhere, but can't find any any instruction on how to choose different bullets in a keynote body text slide.
I hope somebody has found out how to do this.
Thanks, Dieter

Click on the text, then go to the Text Inspector, in the Bullets tab. Use the dropdown menu in the Bullets and Numbering section to choose the general kind of bullet you want, then refine your choices from there.

Similar Messages

  • How can i modify the text created by create_text FM

    Hi Gurus,
    How can i change a long text created using create_text FM?
    I couldn find any FM to modify the text!
    Thanks.

    Hello Umit,
    Sorry...I mislead you. the function to edit the content of a long text is SAVE_TEXT and not RENAME_TEXT.
    In SAVE_TEXT FM, fill this information.
    In HEADER parameter, enter your TDOBJECT, TDNAME, TDID, TDSPRAS and TDTITLE information.
    In SAVEMODE_DIRECT parameter put an X value
    In LINES table, put your new content.
    Execute it.
    Confirm it after, using READ_TEXT function.
    Regards,
    Bruno

  • How can I modify the text of the automatically created emails of WAS 6.40.

    Hi community,
    I have a question. How can I change the text of then email which ist automatically send by the EP6/WAS6.40 when I create a new user. The email displays the message "Dear Sir or Madam, your user xzy was created with the following password xxx."
    How can I modify this text. Where is it located in the Enterprise Portal / WEBAS 6.40 .
    Thank you.
    Best Regards,
    Olaf Reiss

    Not easily or readily available as of now. It WILL be part of the new features in the NetWeaver 04 release. (*This same question was asked in my EP6 certification class one week ago and this is the answer I got.)
    Found this guide in another post...it should help doing what you need manually...
    http://help.sap.com/saphelp_nw04/helpdata/en/33/d494c86203ea40b7b44ddd471baab1/frameset.htm
    Hope this helps!
    CS

  • How can i modify lable of texfield on create user page

    Hi,
    How can i modify lable of texfield on create user page of oracle identity manager administrative console ?
    e.g. display Sponsor ID inplace of Manager ID
    Thanks

    Hi Nitesh,
    I changed in xlWebadmin.properties file and restarted the server but still it is reflecting the old lable e.g.
    In xlWebAdmin.properties file
    - global.lable.managerid= Manager ID
    I changed it to global.lable.managerid= Sponsor ID
    But still it is displaying Manager ID on User form. I am using OIM 9.1
    regards
    Edited by: YMI on Nov 26, 2009 2:45 AM

  • How can I modify the email who is send when I create a new user in EP6

    Hi community,
    I have a question. How can I change the text of the email which is automatically send by the EP6/WAS6.40 when I create a new user. The email displays the message "Dear Sir or Madam, your user xzy was created with the following password xxx."
    How can I modify this text. Where is it located in the Enterprise Portal / WEBAS 6.40 .
    Thank you.
    Best Regards,
    Olaf Reiss

    Hi,
    Here you can find the required steps on how to change the texts of notification emails:
    http://help.sap.com/saphelp_nw04/helpdata/en/33/d494c86203ea40b7b44ddd471baab1/frameset.htm
    Good luck,
    René

  • How can I modify one column of current and next record depending of some criteria?

    Having DDL
    CREATE TABLE #ServiceChange(
    [ID] [int] identity(1,1),
    [SHCOMP] [char](2) NOT NULL,
    [SHCRTD] [numeric](8, 0) NOT NULL,
    [SHCUST] [numeric](7, 0) NOT NULL,
    [SHDESC] [char](35) NOT NULL,
    [SHTYPE] [char](1) NOT NULL,
    [SHAMT] [numeric](9, 2) NOT NULL,
    [CBLNAM] [char](30) NOT NULL,
    [GROUPID] [char](2) NULL
    And original and desire data in below link
    https://www.dropbox.com/sh/bpapxquaae9aa13/AADnan31ZASublDjN7sa2Vvza
    I would like to know how can I modify one column of current and next record depending of some criteria using SQL2012?
    The criteria is:
    Type should always flow F->T
    if current abs(amount)> next abs(amount) then groupid = 'PD'
    if current abs(amount)< next abs(amount) then groupid = 'PI'
    there is no case when those amounts will be equals
    where current(custid) = next(custid) and current(service) = next(service) and groupid is null
    Any help will be really apreciated.
    Thank you

    I tried that and got this error
    'LAG' is not a recognized built-in function name.
    You said you were using SQL 2012, but apparently you are not. The LAG function was added in SQL 2012. This solution works on SQL 2005 and SQL 2008:
    ; WITH numbering AS (
       SELECT groupid,
              rowno = row_number()  OVER (PARTITION BY custid, service ORDER BY date, id)
       FROM   #ServiceChange
    ), CTE AS (
       SELECT a.groupid,
              CASE WHEN abs(a.amount) < abs(b.amount) THEN 'PD'
                   WHEN abs(a.amount) > abs(b.amount) THEN 'PI'
              END AS newgroupid
       FROM  numbering a
       JOIN  numbering b ON b.custid  = a.custid
                        AND b.service = a.service
                        AND b.rowno   = a.rowno - 1
    UPDATE CTE
    SET   groupid = newgroupid
    Erland Sommarskog, SQL Server MVP, [email protected]

  • How can you modify the displayed columns on a Related Information List?

    How can you modify the displayed columns on a Related Information List? For example, how could you add the "Type" column to the List of columns displayed for Service Requests when you are viewing the Contacts Detail page?
    Thanks

    I'd have to say I think this is one of the biggest flaws in the OnDemand system currently. The solution I have come up with is to create reports and put them in webapplets showing the data I want to show. I have then removed the standard Related Info List Objects and added weblinks to create new records as the button on the List object is also gone.
    Keep in mind that doing this does slow things down a little, so it may not work if you have a big user base.
    RWB.

  • How can i modify exe resource in java?

    How can i modify exe resource in java?
    No jni
    thx.

    if it is .NET code decompilation is possible if, and only if the code is not Packed by protections!
    but if the EXE file is native and created by VB 6.0,C/C++,Delphi,... it is not possible to obtain source code from it, not as far as i know.
    (some program does it , but the returned source code is as useful as its assembly code in debugger).
    if decompilation was that easy then Reverse Engineering was no longer needed!
    What program it is so that can put two exe file into each other ?
    the program you seen might put second exe file into its DATA section then when it executes ,
    it jumps to data section of itself!
    otherwise it is not possible.
    Good luck.
    Edited by: 0mega7 on Apr 5, 2008 8:27 AM
    Edited by: 0mega7 on Apr 5, 2008 8:29 AM

  • How can we modify alv output list

    Hi
    this is fazil.
    Please tell me any body How can we modify alv output list.
    Thanks & Regards
    Fazil
    [email protected]

    Fazil,
    check the program,
    You can find the code in this program 'BCALV_FIELDCAT_TEST'
    *& Report  BCALV_FIELDCAT_TEST                                         *
    This report allows to modify the fieldcatalog of a corresponding
    output table and to view the effects of your changes directly.
    Note that for some changes you need to newly display the whole
    ALV Grid Control, e.g., DDIC-Fields are read only the first time
    you call SET_READY_FOR_FIRST_DISPLAY.
    Note also that not all scenarios can be tested since the output
    table does not comprise all fields to test available features
    of the fieldcatalog. Copy this program and extend the output
    table accordingly if you want to test such a special feature.
    (The field CARRNAME in 'gt_sflight' was added to test field REF_FIELD
    and TXT_FIELD of the fieldcatalog - see what happens if you
    calculate subtotals by carrier-id).
    report  bcalvt_fieldcatalog           .
    data: ok_code               type sy-ucomm,
          save_ok_code          type sy-ucomm,
    fieldcatalog for output table
          gt_fieldcat           type lvc_t_fcat,
    fieldcatalog for fieldcatalog itself:
          gt_fcatfcat           type lvc_t_fcat,
          gs_fcatlayo           type lvc_s_layo.
    Output table
    data: begin of gt_sflight occurs 0.
    data: carrname type s_carrname.
            include structure sflight.
    data: end of gt_sflight.
    data: g_max type i value 100.
    data: g_all type c value SPACE.
    Controls to display gt_sflight and corresponding fieldcatalog
    data: g_docking type ref to cl_gui_docking_container,
          g_alv     type ref to cl_gui_alv_grid.
    data: g_custom_container type ref to cl_gui_custom_container,
          g_editable_alv     type ref to cl_gui_alv_grid.
    LOCAL CLASS Definition
    class lcl_event_receiver definition.
      public section.
        methods handle_data_changed
          for event data_changed of cl_gui_alv_grid
          importing er_data_changed.
    endclass.
    class lcl_event_receiver implementation.
      method handle_data_changed.
    at the time being, no checks are made...
      endmethod.
    endclass.
    data: event_receiver type ref to lcl_event_receiver.
    end-of-selection.
      set screen 100.
    *&      Module  STATUS_0100  OUTPUT
          text
    module status_0100 output.
      set pf-status 'BASIC'.
      set titlebar 'BASICTITLE'.
    create ALV Grid Control in the first run
      if g_docking is initial.
        perform create_and_init_controls.
      endif.
    endmodule.                             " STATUS_0100  OUTPUT
    *&      Module  USER_COMMAND_0100  INPUT
          text
    module user_command_0100 input.
      save_ok_code = ok_code.
      clear ok_code.
      case save_ok_code.
        when 'SUBMIT'.
    set the frontend fieldcatalog
    ATTENTION: DDIC-Fields are not updated using this method!
    (see 'RESTART')
          call method g_alv->set_frontend_fieldcatalog
               exporting
                 it_fieldcatalog = gt_fieldcat.
          call method g_alv->refresh_table_display.
          call method cl_gui_cfw=>flush.
        when 'RESTART'.
    Destroy the control currently visible and display it again
    using the changed fieldcatalog.
          perform restart_sflight.
        when '&ALL'.
          perform switch_visibility.
      endcase.
    endmodule.                             " USER_COMMAND_0100  INPUT
    *&      Form  CREATE_AND_INIT_CONTROLS
          text
    -->  p1        text
    <--  p2        text
    form create_and_init_controls.
      create object g_docking
          exporting
               dynnr = '100'
               extension = 150
               side = cl_gui_docking_container=>dock_at_bottom.
      create object g_alv
          exporting
               i_parent = g_docking.
      create object g_custom_container
          exporting
               container_name = 'CC_0100_FIELDCAT'.
      create object g_editable_alv
          exporting
               i_parent = g_custom_container.
    register events
      create object event_receiver.
      set handler event_receiver->handle_data_changed for g_editable_alv.
      call method g_editable_alv->register_edit_event
                    exporting
                       i_event_id = cl_gui_alv_grid=>mc_evt_modified.
      perform build_fieldcatalogs changing gt_fieldcat gt_fcatfcat.
      perform modify_fieldcatalog changing gt_fcatfcat.
      perform select_data.                 "CHANGING gt_sflight
      call method g_alv->set_table_for_first_display
              changing
                   it_outtab       = gt_sflight[]
                   it_fieldcatalog = gt_fieldcat[].
    optimize column width of grid displaying fieldcatalog
      gs_fcatlayo-cwidth_opt = 'X'.
    Get fieldcatalog of table sflight - alv might have
    modified it after passing.
      call method g_alv->get_frontend_fieldcatalog
                importing et_fieldcatalog = gt_fieldcat[].
      call method cl_gui_cfw=>flush.
    Display fieldcatalog of table sflight:
      call method g_editable_alv->set_table_for_first_display
              exporting
                   is_layout       = gs_fcatlayo
              changing
                   it_outtab       = gt_fieldcat[]
                   it_fieldcatalog = gt_fcatfcat[].
    register events
      create object event_receiver.
      set handler event_receiver->handle_data_changed for g_editable_alv.
    endform.                               " CREATE_AND_INIT_CONTROLS
    *&      Form  restart_sflight
          text
    -->  p1        text
    <--  p2        text
    form restart_sflight.
      data: ls_fieldcat type lvc_s_fcat.
    free g_docking and thus g_alv
      call method g_docking->free.
      clear g_docking.
      clear g_alv.
    create new instances
      create object g_docking
          exporting
               dynnr = '100'
               extension = 150
               side = cl_gui_docking_container=>dock_at_bottom.
      create object g_alv
          exporting
               i_parent = g_docking.
    This is an internal method to invalidate all fields in the fieldcat
      loop at gt_fieldcat into ls_fieldcat.
        clear ls_fieldcat-tech_comp.
        modify gt_fieldcat from ls_fieldcat.
      endloop.
    Newly display the list with current fieldcatalog.
      call method g_alv->set_table_for_first_display
              changing
                   it_outtab       = gt_sflight[]
                   it_fieldcatalog = gt_fieldcat.
    Get fieldcatalog - it might be changed by ALV in the last call
      call method g_alv->get_frontend_fieldcatalog
              importing
                   et_fieldcatalog = gt_fieldcat[].
      call method g_editable_alv->refresh_table_display.
      call method cl_gui_cfw=>flush.
    endform.                               " restart_sflight
    *&      Form  select_data
          text
    -->  p1        text
    <--  p2        text
    form select_data.
      data: lt_sflight type table of sflight with header line,
            ls_scarr type scarr.
    select data of sflight
      select * from sflight into table lt_sflight up to g_max rows.
    copy data to gt_sflight and update CARRNAME
      loop at lt_sflight.
        move-corresponding lt_sflight to gt_sflight.
        select single * from scarr into ls_scarr
           where carrid = gt_sflight-carrid.
        gt_sflight-carrname = ls_scarr-carrname.
        append gt_sflight.
      endloop.
    endform.                               " select_data
    *&      Form  BUILD_FIELDCATALOGS
          text
         <--P_GT_FIELDCAT  text
         <--P_GT_FCATFCAT  text
    form build_fieldcatalogs changing p_fieldcat type lvc_t_fcat
                                      p_fcatfcat type lvc_t_fcat.
      data: ls_fcat     type lvc_s_fcat.
    Fieldcatalog for table SFLIGHT: p_fieldcat
    generate fieldcatalog automatically
      call function 'LVC_FIELDCATALOG_MERGE'
          exporting
               i_structure_name       = 'SFLIGHT'
            I_CLIENT_NEVER_DISPLAY = 'X'
           changing
                ct_fieldcat            = p_fieldcat[]
       EXCEPTIONS
            INCONSISTENT_INTERFACE = 1
            PROGRAM_ERROR          = 2
            OTHERS                 = 3
      if sy-subrc <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      endif.
    shift all column positions to the right except for MANDT
      loop at p_fieldcat into ls_fcat.
        if ls_fcat-fieldname ne 'MANDT'.
          add 1 to ls_fcat-col_pos.
          if ls_fcat-fieldname = 'CARRID'.
            ls_fcat-txt_field = 'CARRNAME'."link CARRNAME to CARRID
          endif.
          modify p_fieldcat from ls_fcat.
        endif.
      endloop.
    create a new line for CARRNAME in p_fieldcat
      clear ls_fcat.
      ls_fcat-fieldname = 'CARRNAME'.
      ls_fcat-ref_table = 'SCARR'.
      ls_fcat-col_pos = 1.
    insert new line before CARRID (do not forget MANDT!).
      insert ls_fcat into p_fieldcat index 1.
    Fieldcatalog for table LVC_T_FCAT:p_fcatfcat
    Generate fieldcatalog of fieldcatalog structure.
    This fieldcatalog is used to display fieldcatalog 'p_fieldcat'
    on the top of the screen.
      call function 'LVC_FIELDCATALOG_MERGE'
          exporting
               i_structure_name       = 'LVC_S_FCAT'
            I_CLIENT_NEVER_DISPLAY = 'X'
           changing
                ct_fieldcat            = p_fcatfcat[]
       EXCEPTIONS
            INCONSISTENT_INTERFACE = 1
            PROGRAM_ERROR          = 2
            OTHERS                 = 3
      if sy-subrc <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      endif.
    Hide all fields that are not documented (valid for release 4.6A)
      perform hide_fields changing p_fcatfcat.
    endform.                               " BUILD_FIELDCATALOGS
    *&      Module  EXIT_PROGRAM  INPUT
          text
    module exit_program input.
      leave program.
    endmodule.                             " EXIT_PROGRAM  INPUT
    *&      Form  MODIFY_FIELDCATALOG
          text
         <--P_GT_FCATFCAT  text
    form modify_fieldcatalog changing p_fcatfcat type lvc_t_fcat.
      data ls_fcat type lvc_s_fcat.
      loop at p_fcatfcat into ls_fcat.
        ls_fcat-coltext = ls_fcat-fieldname.
        ls_fcat-edit = 'X'.
        if ls_fcat-fieldname = 'COL_POS' or ls_fcat-fieldname = 'FIELDNAME'.
          ls_fcat-key = 'X'.
        endif.
        modify p_fcatfcat from ls_fcat.
      endloop.
    endform.                               " MODIFY_FIELDCATALOG
    form hide_fields changing p_fieldcat type lvc_t_fcat.
      data: ls_fcat type lvc_s_fcat.
    Only show documented fields of fieldcatalog.
    For a documentation choose "Help->Application Help" in the menu.
      loop at p_fieldcat into ls_fcat.
        if not (
             ls_fcat-fieldname eq 'CFIELDNAME'
        or   ls_fcat-fieldname eq 'COL_POS'
        or   ls_fcat-fieldname eq 'COLDDICTXT'
        or   ls_fcat-fieldname eq 'COLTEXT'
        or   ls_fcat-fieldname eq 'CURRENCY'
        or   ls_fcat-fieldname eq 'DD_OUTLEN'
        or   ls_fcat-fieldname eq 'DECIMALS_O'
        or   ls_fcat-fieldname eq 'DECMLFIELD'
        or   ls_fcat-fieldname eq 'DO_SUM'
        or   ls_fcat-fieldname eq 'DRAGDROPID'
        or   ls_fcat-fieldname eq 'EDIT_MASK'
        or   ls_fcat-fieldname eq 'EMPHASIZE'
        or   ls_fcat-fieldname eq 'EXPONENT'
        or   ls_fcat-fieldname eq 'FIELDNAME'
        or   ls_fcat-fieldname eq 'HOTSPOT'
        or   ls_fcat-fieldname eq 'ICON'
        or   ls_fcat-fieldname eq 'INTLEN'
        or   ls_fcat-fieldname eq 'INTTYPE'
        or   ls_fcat-fieldname eq 'JUST'
        or   ls_fcat-fieldname eq 'KEY'
        or   ls_fcat-fieldname eq 'LOWERCASE'
        or   ls_fcat-fieldname eq 'LZERO'
        or   ls_fcat-fieldname eq 'NO_OUT'
        or   ls_fcat-fieldname eq 'NO_SIGN'
        or   ls_fcat-fieldname eq 'NO_SUM'
        or   ls_fcat-fieldname eq 'NO_ZERO'
        or   ls_fcat-fieldname eq 'OUTPUTLEN'
        or   ls_fcat-fieldname eq 'QFIELDNAME'
        or   ls_fcat-fieldname eq 'QUANTITY'
        or   ls_fcat-fieldname eq 'REF_FIELD'
        or   ls_fcat-fieldname eq 'REF_TABLE'
        or   ls_fcat-fieldname eq 'REPREP'
        or   ls_fcat-fieldname eq 'REPTEXT'
        or   ls_fcat-fieldname eq 'ROLLNAME'
        or   ls_fcat-fieldname eq 'ROUND'
        or   ls_fcat-fieldname eq 'ROUNDFIELD'
        or   ls_fcat-fieldname eq 'SCRTEXT_L'
        or   ls_fcat-fieldname eq 'SCRTEXT_M'
        or   ls_fcat-fieldname eq 'SCRTEXT_S'
        or   ls_fcat-fieldname eq 'SELDDICTXT'
        or   ls_fcat-fieldname eq 'SELTEXT'
        or   ls_fcat-fieldname eq 'SP_GROUP'
        or   ls_fcat-fieldname eq 'SYMBOL'
        or   ls_fcat-fieldname eq 'TECH'
        or   ls_fcat-fieldname eq 'TIPDDICTXT'
        or   ls_fcat-fieldname eq 'TOOLTIP'
        or   ls_fcat-fieldname eq 'TXT_FIELD' ).
          ls_fcat-tech = 'X'.
        endif.
        modify p_fieldcat from ls_fcat.
      endloop.
    endform.
    form switch_visibility.
    data:  lt_fcatfcat type lvc_t_fcat,
            ls_fcat type lvc_s_fcat.
    call method g_editable_alv->get_frontend_fieldcatalog
                 importing ET_FIELDCATALOG = lt_fcatfcat.
    if not g_all is initial.
         perform hide_fields changing lt_fcatfcat.
         g_all = SPACE.
    else.
        loop at lt_fcatfcat into ls_fcat.
           if ls_fcat-tech eq 'X'.
               ls_fcat-tech = SPACE.
               ls_fcat-no_out = 'X'.
               modify lt_fcatfcat from ls_fcat.
           endif.
        endloop.
        g_all = 'X'.
    endif.
    call method g_editable_alv->set_frontend_fieldcatalog
                exporting it_fieldcatalog = lt_fcatfcat.
    call method g_editable_alv->refresh_table_display.
    endform.
    Don't forget to rewaard if useful..

  • How can I modify a widget that uses a script?  In particular, I want to change the HTML that the 2014 Muse contact form produces to adjust the email column widths.

    I have looked all over to find the "source" for the code produced by this widget.  Where is it located, and how can I modify the widget?

    Hi,
    If you want to add fields to a list, as you have written your form in JavaScript, you can take consideration of using JavaScript Client Object Model to add/delete fields dynamically.
    How to: Create, Update, and Delete Lists Using JavaScript
    http://msdn.microsoft.com/en-us/library/office/hh185005(v=office.14).aspx
    If you want to achieve it with Form7, it is recommended to post the question to its forum to get quick and confirmed answer.
    Thanks
    Patrick Liang
    Forum Support
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Patrick Liang
    TechNet Community Support

  • How can I modify the domain of a comment server?

    Acrobat 9 in Windows 7
    Besides editing the registry, how can I modify the URL for a comment server that I've been using for reviews?
    I earlier initiated a shared review but used only the hostname of the server, not the fully qualified name (FQN) that includes the full domain name. Now, when I reuse that server for other reviews that I initiate, I'm stuck with the unqualified name. Folks outside of my subnet can't publish comments to the server because the simple hostname isn't known on their subnet.
    How can I change the properties of that server so future reviews use the FQN?
    Jerry

    You can't edit the server profile through UI.
    The only way available through Acrobat UI is to first delete the earlier server profile and then re-create it again from the Shared Review Initiation Dialog.
    For deleting the profile, Go to  "Edit menu-> Preferences->Tracker" and from the 'Remove Custome Server Locations' section choose the server profile which you want to delete and click on Remove Server Profile.
    -Priyanka

  • How can we modify the Task Priority in BPM workspace???

    How can we modify the Task Priority in BPM workspace??? Is it possible?? If so what is the best and easy way to implement this??

    Hi Chandra,
    First please find the job name in SM37 for FIGL and check the job status to be in "released" status. Select that job and go to job menu and click on change. then it will take you to the job screen where you have "job class". Here you can change the job class to "A" to get to high priority.
    If you are unable to edit the job then create a new job with the same variants by clicking STEP button in the Job screen.
    Try these steps, let me know if are able to do so.
    Regards,
    Ravi Kanth

  • How can I modify the application- validation- set- value validation

    Dear all :
    After I created a new value set( application->validation->set->value validation), I want to change the Type of the "value validation",how can I modify ?
    Regards
    Terry

    Dear all:
    Sorry, I found the answer in the metalink note :[ID 396369.1]     
    Regards
    Terry

  • How can we modify the distination url while migrate the personalization

    Hi All,
    I got the requirement to create a link in iSupplier home page. I have created the link using oa framework personalization and set the destination URL with the third party's test instance URL. It is available in test instance and the third party url is also the test instance url . I have to move this personalization to production. In production the same link has to open the third party's prod instance only. But i am little bit confused, how can we modify the detsination url in the personalizaed the document.
    Please suggest me if there is any generic way of modifying the link url while migrating the personalization from one instance to another instance.
    Thanks in Advance..
    Regards,
    Purushoth

    Hi,
    ---Its nt possible via personalization go for co extension
    Im not sure but pls try with below approach.
    ---In co get the webBean of OALinkBean and setDestination URL in code.
    if(Prod)
    setdestinationURL("");
    if(Testing)
    setDestinationURL("");
    Regards
    Meher Irk

  • How can I modify data from a Transparent Table without ABAP code.

    Hi,All
    How can I modify data from a Transparent Table (like TCURR),  and important thing is I want do all that with no ABAP code here. It is like that we always do that in a Oracle database use TOAD or PLSQL third party tools, with no script code here.
    I had fond that there is a way can do that:
    1, type 'se11',and Display Database table 'TCURR', click Contents, then click Execute to display all data
    2, type '/h' and let debugging on
    3, select one of this data then click 'Display',enter in debugging system.
    4, then make a breakpoint in the code. But... display a dialog let I type a 'ABAP Cmnds', I want to know what can be type in for that?
    and, My system is ECC6.
    thank you all
    Edited by: xuehui li on Aug 20, 2008 6:30 PM

    Hello,
    Your approach (with Vijay's suggestion) MAY work.  However, depending on how tight security is at the company that you are working at you may or may not be able to acutaly change the value of the SHOW field to EDIT.  This will be especially true if you are working in a Production environment.  Vijay's other comment is true as well.  This is not a recommended approach to change data (especially data with a financial impact like TCURR) in a production environment.  The auditors will not be impressed.
    Explore the option of a maintenace view or look at tcode TBDM to upload a file which includes daily rates from providers like Reuters or try tcode s_bce_68000174 which is a maintenance view on TCURR.
    Regards
    Greg Kern

Maybe you are looking for