How can I modify the address for a calendar entry?

I am creating an entry in Calendar, and the address is
106 Queens Road
Brighton
England
BN1
I need to add a floor to this address, before I can send the calendar invitation, but it's not possible to add this detail, or modify the details at all.

<p>From the looks of it, the default parameter prompt screen isn&#39;t really fitting your requirements.  You have a number of requests for modification.</p><p>In your case I think the best thing to do would be to create your own parameter prompt screen.  You can use the SDK to create a page that works for all reports by inspecting the reports parameters before you set the values.</p><p>This would allow you the flexibility of easily meeting your customers requirements.</p><p>Point 1 - I&#39;m not sure.</p><p>Point 2 - There isn&#39;t much access to change the prompt screen.</p><p>Point 3 - I&#39;m not sure why you would want to change the formatting of the Date when you are already using a calendar object to get it.  It sounds like you might have a small mistake in the way you edited the javascript.</p><p>I really think you are probably better off creating your own prompt screen. <br /></p><p>Rob Horne<br /><a href="/blog/10">Rob&#39;s blog - http://diamond.businessobjects.com/blog/10</a></p>

Similar Messages

  • How can I modify the UI for the crystalreportviewer prompt screen ?

    <p>Hi,</p><p> I am using Crystal Report XI with JRC.</p><p>I have come across a couple of issues. My report accepts 2 parameters from the user. One is a date field and the other is the &#39;Period&#39;. I have provided a drop-down having values as Daily, Weekly, Monthly, Quarterly, Yearly.</p><p> The following are the issues that I have come across:</p><p>1. Selecting a value from the drop-down and submitting the form gives the following error.</p><p>     [java] 17:46:20,265 INFO  [STDOUT] 17:46:20,265 ERROR [com.businessobjects.reports.sdk.JRCCommunicationAdapter] JRCAgent11 detected an exception: The value for parameter `Period` must match one of the specified default values.<br />     [java]     at com.crystaldecisions.reports.dataengine.d.case(Unknown Source)<br />     [java]     at com.crystaldecisions.reports.dataengine.d.at(Unknown Source)<br />     [java]     at com.crystaldecisions.reports.dataengine.d.new(Unknown Source)<br />     [java]     at com.crystaldecisions.reports.common.as.a(Unknown Source)<br />     [java]     at com.crystaldecisions.reports.common.ae.a(Unknown Source)<br />     [java]     at com.businessobjects.reports.sdk.b.k.a(Unknown Source)<br />     [java]     at com.businessobjects.reports.sdk.b.s.do(Unknown Source)<br />     [java]     at com.businessobjects.reports.sdk.JRCCommunicationAdapter.request(Unknown Source)<br />     [java]     at com.businessobjects.reports.sdk.JRCCommunicationAdapter.request(Unknown Source)<br />     [java]     at com.crystaldecisions.proxy.remoteagent.x.a(Unknown Source)<br />     [java]     at com.crystaldecisions.proxy.remoteagent.q.a(Unknown Source)<br />     [java]     at com.crystaldecisions.proxy.remoteagent.q.else(Unknown Source)<br />     [java]     at com.crystaldecisions.proxy.remoteagent.q.for(Unknown Source)<br />     [java]     at com.crystaldecisions.proxy.remoteagent.q.do(Unknown Source)<br />     [java]     at com.crystaldecisions.proxy.remoteagent.q.if(Unknown Source)<br />     [java]     at com.crystaldecisions.proxy.remoteagent.u.performDo(Unknown Source)<br />     [java]     at com.crystaldecisions.proxy.remoteagent.u.a(Unknown Source)<br />     [java]     at com.crystaldecisions.sdk.occa.report.application.DataDefController.a(Unknown Sour<br />ce)<br />     [java]     at com.crystaldecisions.sdk.occa.report.application.ParameterFieldController.modify(<br />Unknown Source)<br />     [java]     at com.crystaldecisions.sdk.occa.report.application.ParameterFieldController.modify(<br />Unknown Source)<br />     [java]     at com.crystaldecisions.sdk.occa.report.application.ParameterFieldController.setCurr<br />entValues(Unknown Source)<br />     [java]     at com.crystaldecisions.sdk.occa.report.application.ReportSource.a(Unknown Source)<br />     [java]     at com.crystaldecisions.sdk.occa.report.application.ReportSource.a(Unknown Source)<br />     [java]     at com.crystaldecisions.sdk.occa.report.application.ReportSource.getPromptParameterF<br />ields(Unknown Source)<br />     [java]     at com.crystaldecisions.sdk.occa.report.application.AdvancedReportSource.getPromptPa<br />rameterFields(Unknown Source)<br />     [java]     at com.crystaldecisions.sdk.occa.report.application.NonDCPAdvancedReportSource.getPr<br />omptParameterFields(Unknown Source)<br />     [java]     at com.crystaldecisions.reports.reportengineinterface.JPEReportSource.getPromptParam<br />eterFields(Unknown Source)</p><p> When in the report I set allowcustomvalues to true then it accepts the value selected from the dropdown. But in this case the prompt screen shows a textbox next to the drop-down that gets populated on selecting any option from the dropdown. This textbox is editable and can accept any value. Is there a way I can get rid of this textbox. Also i would like to know why the drop-dwon by itself is incapable of passing the value.</p><p> 2. Secondly, Is there anyway I can change the UI for the crystalreportviewer prompt screen being displayed for accepting the parameters from the user. As per my clients requirement the messages displayed in the prompt screen should be customised.</p><p>3. The third issue is with the date parameter. When a date is selected using the calender control the textbox gets populated in the following format Date(yyyy,mm,dd). My requirement is that this should be a userfriendly format like mm-dd-yyyy. I have succesfully modified the crystalreportviewer javascript so that the calender returns the date in the required format i.e. mm-dd-yyyy. But in this case the date parameter is not accepted though no error is displayed on the console. I have tried rechanging the format into Date(yyyy,mm,dd) before the prompt form is submitted but even this didnot help. What can I do to overcome this problem? </p><p>Any help with respect to the above problems will be highly appreciated.</p><p>Thanks & Regards</p>

    <p>From the looks of it, the default parameter prompt screen isn&#39;t really fitting your requirements.  You have a number of requests for modification.</p><p>In your case I think the best thing to do would be to create your own parameter prompt screen.  You can use the SDK to create a page that works for all reports by inspecting the reports parameters before you set the values.</p><p>This would allow you the flexibility of easily meeting your customers requirements.</p><p>Point 1 - I&#39;m not sure.</p><p>Point 2 - There isn&#39;t much access to change the prompt screen.</p><p>Point 3 - I&#39;m not sure why you would want to change the formatting of the Date when you are already using a calendar object to get it.  It sounds like you might have a small mistake in the way you edited the javascript.</p><p>I really think you are probably better off creating your own prompt screen. <br /></p><p>Rob Horne<br /><a href="/blog/10">Rob&#39;s blog - http://diamond.businessobjects.com/blog/10</a></p>

  • How can i write the code for make calendar in sap abap

    hi this aditya  from ongc trainee
    i want design the calendar which is editadle only at present date for tik is it present or not.

    Hi Ajay ,
              You can have Calender in your webdynpro Application by creating Element " DateNavigator" .

  • How can I modify the domain of a comment server?

    Acrobat 9 in Windows 7
    Besides editing the registry, how can I modify the URL for a comment server that I've been using for reviews?
    I earlier initiated a shared review but used only the hostname of the server, not the fully qualified name (FQN) that includes the full domain name. Now, when I reuse that server for other reviews that I initiate, I'm stuck with the unqualified name. Folks outside of my subnet can't publish comments to the server because the simple hostname isn't known on their subnet.
    How can I change the properties of that server so future reviews use the FQN?
    Jerry

    You can't edit the server profile through UI.
    The only way available through Acrobat UI is to first delete the earlier server profile and then re-create it again from the Shared Review Initiation Dialog.
    For deleting the profile, Go to  "Edit menu-> Preferences->Tracker" and from the 'Remove Custome Server Locations' section choose the server profile which you want to delete and click on Remove Server Profile.
    -Priyanka

  • How can I modify the Fit, Crop, or Ken Burns effect for the entire movie?

    How can I modify the Fit, Crop, or Ken Burns effect for the entire movie? I've been having to go through them all individually which takes forever.

    You could try  Edit > Select All  then click on the crop button and change the setting from Ken Burns to Fit.
    I find that this only works if you do not have the Automatic Cross Dissolve transitions in place.
    If you do, File > Project Theme and uncheck the transitions and remove them.
    After you have changed from Ken Burns to Fit, you can re-apply them.
    Easiest way in future is to set up your project (File > Project Properties) before you start adding photos.
    z.

  • When I logon for XP, if I am no actively doing something for several minutes I am logoff and must reenter my logon again. How can I modify the time it stays active?

    When I first logon to windows xp if I am not actively doing something minutes I am logoff and must re-enter my ogon again. How can I modify the length of time that it stays active?

    You can find that in control panel

  • How can I sync the address book from Mail to my Address book?

    Ok, I open a new message and click on the Address Book icon in the new message to find my contacts on the address book, I choose the group I am looking for and the group has people on it that I have already deleted from my address book! How can I sync the address book from Mail to my Address book?

    It is using the same database on disk. You may have to re-launch Mail.

  • How can I synch the Address Book on my Mac to the Contacts on my iPad (or, can I setup Address Book on my iPad?)

    How can I synch the Address Book on my Mac to the Contacts on my iPad (or, can I setup Address Book on my iPad?)

    Selected under the Info tab for your iPad sync preferences with iTunes.
    With such a question, you should spend some time with the user guide.
    http://manuals.info.apple.com/en/ipad_user_guide.pdf

  • How can we modify the maximum no. of columns in pivot table ?

    hi all,
    How can we modify the maximum no. of columns in pivot table ?
    do i need to change the nqconfig.ini or instanceconfig file or else?
    thnx..

    A little search on the forum :
    In the instanceconfig.xml add a <PivotView> element under <ServerInstance> if one does
    not exist already.
    Within the <PivotView> element add an entry that looks like:
    <MaxCells>nnnnnn</MaxCells>
    where nnnnnn is your desired limit for the maximum total number of cells allowed
    in a pivot.
    Warning: an excessively large number will cause more memory consumption and
    slower browser performance.The details here :
    Oracle BI EE (10.1.3.2): Maximum total number of cells in Pivot Table excee

  • How can I decouple the pagination for a global region?

    I was having a delightful time using a common region defined on a global page when I determined that pagination setting was begin carried from one page to the next.  Arghhhh!  So for example, if I have paged to the second set (page) of rows (11-20) on Page 1 and then I go to Page 2, the second set (page) of rows (11-20) is displayed there.   If I go to a page which only has a first set of rows (1-10), I get the pagination error "Invalid set of rows requested, the source data of the report has been modified. Reset Pagination".  And when I click to reset, it just repeats the error.  [I suppose it tries to display the second set or rows (11-20) again -- which doesn't exist.  What's that saying about insanity?]  
    How can I decouple the pagination for a global region? I want it to operarate just as it would if it were not sharing a common region.  So if I'm looking at rows (11-20) on page 1, I can go to any other page beginning with rows 1-10 there.  Then return to page 1 where I left off with rows 11-20 displayed.  One solution is NOT to paginate but that's not my preferred solution.
    Howard

    Howard(...inTraining) wrote:
    I was having a delightful time using a common region defined on a global page when I determined that pagination setting was begin carried from one page to the next.  Arghhhh!  So for example, if I have paged to the second set (page) of rows (11-20) on Page 1 and then I go to Page 2, the second set (page) of rows (11-20) is displayed there.   If I go to a page which only has a first set of rows (1-10), I get the pagination error "Invalid set of rows requested, the source data of the report has been modified. Reset Pagination".
    The fact that there are different numbers of rows returned on different pages implies that the reports have some local page dependencies, so why try to use a global component? What's the actual requirement? How many pages does the report have to appear on? (Please say it is a report and not a tabular form...)
    How can I decouple the pagination for a global region? I want it to operarate just as it would if it were not sharing a common region.
    The point is that a global region is just that: a single region that happens to be displayed on multiple pages. It does not create multiple instances of a region on different pages. (Specifically, a region has a single region ID, and this is used to reference it whether it appears on one page or all of them. The region ID is used by the report for the purposes of AJAX refresh, pagination etc.)
    A similar situation was discussed a long time ago. I'm rather surprised that Scott regarded it as a bug: the fact that it doesn't seem to have been "fixed" or have a bug number attached may indicate that the others on the APEX team disagreed with him? I haven't tried the workaround he suggested, however I don't think it's likely to be prove a useful line of attack for your issue, as (1) it resets pagination rather than preserving it; and (2) it doesn't appear to be compatible with the AJAX PPR pagination used in more recent versions of APEX.
    I can't see any straightforward "solution" (largely because I don't think there's really a problem: the exhibited behaviour is exactly how I expect/want global regions to behave). Pagination processing is undocumented. The current 4.2 apex.widget.report.paginate JS method is specifically annotated as "for internal use only". Search the forum for custom pagination techniques. Messy looking hacks for IRs have previously been suggested.
    So if I'm looking at rows (11-20) on page 1, I can go to any other page beginning with rows 1-10 there.  Then return to page 1 where I left off with rows 11-20 displayed.  One solution is NOT to paginate but that's not my preferred solution.
    Assuming that there aren't too many pages involved, the other obvious option is to create unique regions on the required pages. You can achieve some level of reusability by creating SQL Query (PL/SQL function body returning SQL query) reports based on an external function so that there's only a single SQL source to be maintained.
    Explain the requirement in more detail. Pagination is not the only option for reducing the quantity of displayed information. Often it's better to display some of all of the data, rather than all of some of it...

  • How can you modify the displayed columns on a Related Information List?

    How can you modify the displayed columns on a Related Information List? For example, how could you add the "Type" column to the List of columns displayed for Service Requests when you are viewing the Contacts Detail page?
    Thanks

    I'd have to say I think this is one of the biggest flaws in the OnDemand system currently. The solution I have come up with is to create reports and put them in webapplets showing the data I want to show. I have then removed the standard Related Info List Objects and added weblinks to create new records as the button on the List object is also gone.
    Keep in mind that doing this does slow things down a little, so it may not work if you have a big user base.
    RWB.

  • Qosmio X500-15F - How can I modify the DPI?

    Hello
    With Qosmio X500-15F and graphic card NVIDIA GeForce GTX 460M
    I'm using a professional software for jewelry building (Matrix 6.0 based on Rhinoceros 3D 4.0 SR9). When starting it, the software is asking me to set the DPI to normal.
    How can I modify the DPI? I already tried different resolution settings. It doesn't change the problem.
    Thanks for help

    DPI is how many pixels per inch of the LCD. You can't change that.
    I think the software needs a specific resolution or LCD size. Try lowering the resolution to 1280x800 or try an external monitor.

  • How can I modify the High Speed Data Reader VI to show correct time informatio​n in x-axis?

    I am just a beginner learning the LabVIEW programming currently.
    I have a PXI 6115 DAQ card and have to make a hardware timed acquisition VI for maximum performance. Thus I use the High Speed Data Logger VI for data acquisition.
    However, when I read my data by using the High Speed Data Reader VI, it doesn't show its correct time information in the graph.
    How can I modify the High Speed Data Reader VI to show correct time information in x-axis?
    I hope you can explain easily because I am a beginner.

    Hey Chunrok,
    I've modified the High Speed Data Reader VI slightly so that it now uses the scan rate of the data (as determined from the file) to set the scaling for the data points. If you wanted the start time to be a specific time you could use the start time obtained from your file to set the xscale offset as well.
    I hope this helps!
    Sarah Miracle
    National Instruments
    Attachments:
    Example.vi ‏281 KB

  • How can I modify the High Speed Data Reader VI to show the time information in x-axis?

    I am just a beginner learning the LabVIEW programming currently.
    I have a PXI 6115 DAQ card and have to make a hardware timed acquisition VI for maximum performance. Thus I use the High Speed Data Logger VI for data acquisition.
    However, when I read my data by using the High Speed Data Reader VI, it doesn't show its time information in the graph.
    How can I modify the High Speed Data Reader VI to show the time information in x-axis?
    I hope you can explain easily because I am a beginner.

    Format the x axis to either absoulte or relative time.
    You can do this by right clickingo n the graph and selecting x axis then formatting from the menu.
    Thanks,
    Naresh

  • How can I modify the High Speed Data Reader VI to show correct time information in x-axis?

    I am just a beginner learning the LabVIEW programming currently.
    I have a PXI 6115 DAQ card and have to make a hardware timed acquisition VI for maximum performance. Thus I use the High Speed Data Logger VI for data acquisition.
    However, when I read my data by using the High Speed Data Reader VI, it doesn't show its correct time information in the graph.
    How can I modify the High Speed Data Reader VI to show correct time information in x-axis?
    I hope you can explain easily because I am a beginner.

    First, I couldn't seem to find that example either on computer or on the NI sites.
    The problem that we're running into is stated in the article that I pointed to - when real time VIs are running, then the OS will stop updating the OS clock. TO us it looks like the clock is losing time. There is a hardware clock on the PXI and it is read only during boot up to set the OS clock. Our discussions with NI have not led to a solution for this problem without checking the time on start and then checking the tick count (which does not lose time) and calculating what the current time is. No access to the hardware clock is supplied.
    We're still working on a simpler way to get accurate time.
    Rob

Maybe you are looking for

  • Unmountable Boot Volume error

    After installing windows on my mac ive tried toget into it again but a blue error screen appears with UNMOUNTABLEBOOTVOLUME. I cant seem to switch back to mac as i didnt have the latests service package i needed to install it anyway so i turned off n

  • IOS NAT Load Balancing w/ Failover Problem

    Greetings, i am currently using the configuration below to provide failover between two DSL connections, all is working fine but i had expected outbound connections to be load balanced between the two DSL links on a round robin basis, however looking

  • Marker and color in a graph

    I would like to change the color palette in a graph. How can I do it? Also I would like to change the size of the markers in a graph, is it possible? Pls. Help!!!

  • Problems starting a Message Bridge on 8.1sp3

    Hi,           We've been ruuning weblogic server 8.1 sp2 for sometime using a message bridge it has always startted transferring message automatically after a ser ver restart, you see messages such as :           Oct 12, 2004 10:27:10 AM BST> <Notice

  • Problems downloading the Photoshop Elements 13 & Premeire 13 pkg

    I purchased the Adobe Photoshop Elements 13 & Premiere pkg on Friday night because the price seemed right $74.99 for both vs $119.99 or $149.99 depending on where you looked on the site for the pricing. The information to download this package has be