How can I modify the screen of TCode IW31/IW32/IW33?

How can I modify the screen of TCode IW31/IW32/IW33?
I'm trying to add new fields, so that after inputting the order type and hit on enter, a new field will be added under the Service area. Does anyone knows how can I do it?

Hi,
Screen badi's for IW31.
IWO1_SCREEN_MODIFY
IWO1_PREQ_BADI
WOC_FL_DETERMINE
Refer This:
Screen exit for transaction IW31 for ref. object O150
Regards,
Shiva Kumar

Similar Messages

  • How can we modify the Task Priority in BPM workspace???

    How can we modify the Task Priority in BPM workspace??? Is it possible?? If so what is the best and easy way to implement this??

    Hi Chandra,
    First please find the job name in SM37 for FIGL and check the job status to be in "released" status. Select that job and go to job menu and click on change. then it will take you to the job screen where you have "job class". Here you can change the job class to "A" to get to high priority.
    If you are unable to edit the job then create a new job with the same variants by clicking STEP button in the Job screen.
    Try these steps, let me know if are able to do so.
    Regards,
    Ravi Kanth

  • How can I get the screen to lock on my iPhone 4, so I don't press buttons while talking?

    I just upgraded to the iPhone 4.  When I am talking on the phone, the screen doesn't lock, so I am constantly pressing buttons or hanging up on the person I'm talking to.  How can I get the screen to lock while I'm talking?  It's driving me NUTS.

    The otterbox is one of the culprits. Take the phone out of the case and see if it still happens. If so it is not the case. If the problem goes away, then you may need to make the hole slightly larger. My family has three iPhone 4's in otterboxes and none have this problem. Other users on this forum have reported success with the above methods.

  • How can we read the screen field values from the report selection screen wi

    Hi expart,
    How can we read the screen field values from the report selection screen with out having an ENTER button pressed  .
    Regards
    Razz

    use this code...
    AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_posnr.
    **Read the Values of the SCREEN FIELDs
    CALL FUNCTION 'DYNP_VALUES_READ'

  • How can we modify the maximum no. of columns in pivot table ?

    hi all,
    How can we modify the maximum no. of columns in pivot table ?
    do i need to change the nqconfig.ini or instanceconfig file or else?
    thnx..

    A little search on the forum :
    In the instanceconfig.xml add a <PivotView> element under <ServerInstance> if one does
    not exist already.
    Within the <PivotView> element add an entry that looks like:
    <MaxCells>nnnnnn</MaxCells>
    where nnnnnn is your desired limit for the maximum total number of cells allowed
    in a pivot.
    Warning: an excessively large number will cause more memory consumption and
    slower browser performance.The details here :
    Oracle BI EE (10.1.3.2): Maximum total number of cells in Pivot Table excee

  • How can you modify the displayed columns on a Related Information List?

    How can you modify the displayed columns on a Related Information List? For example, how could you add the "Type" column to the List of columns displayed for Service Requests when you are viewing the Contacts Detail page?
    Thanks

    I'd have to say I think this is one of the biggest flaws in the OnDemand system currently. The solution I have come up with is to create reports and put them in webapplets showing the data I want to show. I have then removed the standard Related Info List Objects and added weblinks to create new records as the button on the List object is also gone.
    Keep in mind that doing this does slow things down a little, so it may not work if you have a big user base.
    RWB.

  • Qosmio X500-15F - How can I modify the DPI?

    Hello
    With Qosmio X500-15F and graphic card NVIDIA GeForce GTX 460M
    I'm using a professional software for jewelry building (Matrix 6.0 based on Rhinoceros 3D 4.0 SR9). When starting it, the software is asking me to set the DPI to normal.
    How can I modify the DPI? I already tried different resolution settings. It doesn't change the problem.
    Thanks for help

    DPI is how many pixels per inch of the LCD. You can't change that.
    I think the software needs a specific resolution or LCD size. Try lowering the resolution to 1280x800 or try an external monitor.

  • HT204380 How can I make the screen full screen when I am calling?

    How can I make the screen full screen when I am calling on Facetime on a Macbook Pro Laptop?

    Ok but if the iPhone 5s and 5 can go full screen the why can't the iPad Air as it too is new the problem shouldn't be hard to solve as I have looked the apple site and it show it just fine in full screen so I'm sure you understand when I say there is most definitely away of doing it so can Apple just sort it out I'm always telling my m8 how good Apple devices are and I've been let down on this so come on fix it PLEASE

  • When I logon for XP, if I am no actively doing something for several minutes I am logoff and must reenter my logon again. How can I modify the time it stays active?

    When I first logon to windows xp if I am not actively doing something minutes I am logoff and must re-enter my ogon again. How can I modify the length of time that it stays active?

    You can find that in control panel

  • How can I stop the screen on my iPad from dimming & turning off so quickly?

    How can I stop the screen on my iPad from dimming &amp; turning off so quickly?

    Settings>General>Auto-Lock>Set the time you want.

  • How can we debug the screen pop up?

    How can we debug the screen pop up?

    Hi,
    if you know where the popup is raised it is easy of course as you just have to uses F6 to keep the debug mode running.
    But there is a way to get the popup into debug mode similar to typing /h into the ok code field of a sandard dynpro. Therefore you have to do the following steps:
    1) click the "Create a Shortcut" button in the gui to get a shortcut on your desktop (the button next to new session)
    2) in the oped screen for shortcut setting choose:
         type -> system command
         command -> /h
         depending on gui release you have to enter a system ID -> use the one of your system and parameters -> just type abc
    3) press finish to create the shortcut
    If you have done this you can drag and drop the shortcut from the desktop to a sap session or popup to switch on the debug mode. One shortcut works for all systems you have, the system id in it does not matter.
    Oh, while I often have the case that I forget to resize the window before the popup appears so i cannot access the shortcut directly on the desktop, just remeber that you can always open a small file explorer window go to the desktop folder and drag it from there ;o)
    Best Regards
    Roman

  • How can I modify the domain of a comment server?

    Acrobat 9 in Windows 7
    Besides editing the registry, how can I modify the URL for a comment server that I've been using for reviews?
    I earlier initiated a shared review but used only the hostname of the server, not the fully qualified name (FQN) that includes the full domain name. Now, when I reuse that server for other reviews that I initiate, I'm stuck with the unqualified name. Folks outside of my subnet can't publish comments to the server because the simple hostname isn't known on their subnet.
    How can I change the properties of that server so future reviews use the FQN?
    Jerry

    You can't edit the server profile through UI.
    The only way available through Acrobat UI is to first delete the earlier server profile and then re-create it again from the Shared Review Initiation Dialog.
    For deleting the profile, Go to  "Edit menu-> Preferences->Tracker" and from the 'Remove Custome Server Locations' section choose the server profile which you want to delete and click on Remove Server Profile.
    -Priyanka

  • How can i modify the check constraint   in the table

    How can i modify the check constraint in the table. This table containts check constraint, condition is code_value between 1 and 4. codevalue is column name.
    Please suggest me.

    Go to tahiti.oracle.com, pick version browse reference manual and see the alter table statement
    Also read the goal of this forum.
    Your question is more appropriate to Database general forum
    General Database Discussions
    Gints Plivna
    http://www.gplivna.eu

  • How can I modify the High Speed Data Reader VI to show correct time informatio​n in x-axis?

    I am just a beginner learning the LabVIEW programming currently.
    I have a PXI 6115 DAQ card and have to make a hardware timed acquisition VI for maximum performance. Thus I use the High Speed Data Logger VI for data acquisition.
    However, when I read my data by using the High Speed Data Reader VI, it doesn't show its correct time information in the graph.
    How can I modify the High Speed Data Reader VI to show correct time information in x-axis?
    I hope you can explain easily because I am a beginner.

    Hey Chunrok,
    I've modified the High Speed Data Reader VI slightly so that it now uses the scan rate of the data (as determined from the file) to set the scaling for the data points. If you wanted the start time to be a specific time you could use the start time obtained from your file to set the xscale offset as well.
    I hope this helps!
    Sarah Miracle
    National Instruments
    Attachments:
    Example.vi ‏281 KB

  • How can I modify the High Speed Data Reader VI to show the time information in x-axis?

    I am just a beginner learning the LabVIEW programming currently.
    I have a PXI 6115 DAQ card and have to make a hardware timed acquisition VI for maximum performance. Thus I use the High Speed Data Logger VI for data acquisition.
    However, when I read my data by using the High Speed Data Reader VI, it doesn't show its time information in the graph.
    How can I modify the High Speed Data Reader VI to show the time information in x-axis?
    I hope you can explain easily because I am a beginner.

    Format the x axis to either absoulte or relative time.
    You can do this by right clickingo n the graph and selecting x axis then formatting from the menu.
    Thanks,
    Naresh

Maybe you are looking for

  • My mac is getting full...

    I like my music on my mac but I don't need all those series and movies on there... is there a way for me too keep movies and series on a external drive while keeping all my music on my mac while at the same time syncing all this to my TV?

  • C-form against CST

    Hi, I have a requirement from client. For the CST they are paying they want to have C-forms. Where can I maintain this. Any confuguration/customisation required for capturing these. Is there any report, showing the C-forms to be delivered? Regards

  • ABAP APPLICATION_ ERROR

    Hi, I am doing purchase requsition scenario. ie. ECC> PI>SRM The message are coming successfully from ECC to PI from Pi to SRM and response back from SRM to PI to ECC. But when we check the ECC system SXMB_MONI we are getting the following error. You

  • Hyperion FR report PDF view

    Hello: I created a large P&L report with Financial Report Studio. The report views perfectly with the web browser. However, when I click "Save to PDF" icon in Hyperion workspace; and then open the saved PDF file, the report looks really funny. Some l

  • Help get me on the wireless!!!

    Here's the thing. Bought my new Macbook in Singapore, got it home (in Singapore), opened it up and BANG! We're online (after setting it the MAC ID) as easy as that. Now I come over to Brunei, the wireless system I'm trying to access did have a WPA pa