How can I monitor across the enterprise what the Discoverer Activity is?

I'm told by our FM supplier that the number of Discoverer reports that are being run by users is having a detrimental impact on the general Oracle system performance. However, this is a "gut feel" and no hard facts can be produced.
Is there a way of seeing a summary of all the reports kicked off during the day / week, and the length of time each takes to run {or some other metric that would show the complexity of the report} ?
Thanks

You can enable the QPP Stats on the EUL and this will tell you a bunch of information about the workbooks, who ran them, how long they ran, etc. I can't find the documentation on it right now, but it can be enabled through the pref.txt on your application servers.

Similar Messages

How can I monitor what my kids are searching on the internet and chats with their iphones

Can I monitor from my iphone what my kids are searching on their iphones

Hello Fellows2014,
After reviewing your post, I have located an article that can help in this situation. It contains helpful advice concerning parental controls:
iOS: Understanding Restrictions (parental controls)
http://support.apple.com/kb/ht4213
You can enable Restrictions, also known as parental controls, on iPhone, iPad, and iPod touch. Restrictions stop you from using specific features and applications. Learn more about the types of Restrictions and how to enable or disable them on your device.
Thank you for contributing to Apple Support Communities.
Cheers,
BobbyD

How can I sign up with Enterprise program, while I have an active membership of the iOS developer program?

How can I sign up with Enterprise program, while I have an active membership of the iOS developer program?
I have bought a memership for the iOS Developer program.
I have created an in-house app.
Now I want to publish it to all employees without registering the devices.
So..
I go to their website and try to sign up for the enterprise program, image shown below:
http://s29.postimg.org/q06ylh5o6/Clipboard01.jpg
Within the image above, I click continue...
http://s14.postimg.org/46lqcpy74/Clipboard02.jpg
Then I am taken to the image above, there I need to select a program, but I already have a program, the iOS developer program! And the checkbutton of that program, is disabled. If I try to click continue at this page, without sleecting a program, a javascript-box shows "You have to select a program before continuging"...
Do I need to unsubscribe my iOS developer program, to then register it again? Lol!
PS: no clue where I should post this, looked over the forums and could not see anything related to singing up, registering for a program...

Our apps came offline automatically shortly after this as iTunesConnect thought we had not renewed our license, even though we had several weeks ago.
We had a brief panic as our apps were offline for 12 hours, which is how long it took Apple Support to work out what was wrong and hook things up.
I suggest you contact them ASAP to get this fixed so you don't get that iTunesConnect alert to your phone 'Your app status has been changed to Pending Contract'.

My 10 yr old wants to text from his iPod touch. We have 1 family Apple ID. How can I monitor his texts without receiving all of his friends messages? Do I need a separate Apple ID or can I link a new email address to the same Apple ID?

My 10 yr old wants to text from his iPod touch. We have 1 family Apple ID. How can I monitor his texts without receiving all of his friends messages? Do I need a separate Apple ID or can I link a new email address to the same Apple ID?

Just an email address
MacMost Now 653: Setting Up Multiple iOS Devices For Messages and FaceTime

How can I monitor my monthly data usage for all 3 computers in my house? I have an Airport base station and it seems there should be software to monitor it from that point rather than monitoring the usage for each computer and then adding it up.

How can I monitor my monthly data usage for all 3 computers in my house? I have an Airport base station and it seems there should be software to monitor it from that point rather than monitoring the usage for each computer and then adding it up.

The following example was one of dozens that showed up on a simple Google search of.....
monitor Internet data use on a Mac
Watch your Internet usage with NetUse Monitor | Macworld
Most service providers have an application for their users as well.

I keep getting the message: "what should firefox do with this file" in Windows XP every time I want to download a file, e.g., adobe, excel, etc. How can this annoying message be deleted? The check box to "open file automatically" does not work!

I keep getting the message: "what should Firefox do with this file" in Windows XP every time I want to download a file, e.g., adobe, excel, etc. How can this annoying message be deleted? The check box to "open file automatically" does not work!

cor-el,
Thanks for your prompt reply. However, the sources you gave do not seem to apply exactly to my situation. I have attached some screenshots that show what the dialogue box looks like for a pdf download, and what my settings in the Apps panel of Options are. You will note in the first screenshot that I have checked the box to handle this file type automatically; however, the next time I try to download a file of that type, the same dialogue box appears looking exactly like the one shown, so checking the "automatic" option appears to do nothing. The files to be downloaded from my Gmail messages are not generic or altered file types - they are shown as pdf, doc, docx, etc. So while your intent was good, your post did not help. Thanks anyway.

HT204266 I live in China, have Dutch nationality, and no US address or Credit Card; how can I have access to products from the US iTunes store, in particular music, when such items are not available from the China iTunes store? In general, what are the di

I live in China, have Dutch nationality, and no US address or Credit Card; how can I have access to products from the US iTunes store, in particular music, when such items are not available from the China iTunes store? In general, what are the differences between countries' iTunes offerings? Does one really need an address and a credit card for any country to be able to access that countries iTunes store? Why these restrictions?

You cannot.
You cannot use another countrys itunes store.
You must be physically locates inside the borders of a country to use that countrys itunes store and a credit card issued in that country with a valid billing address in that country.
The owners of the distribution rights of movies/music/etc differ by country. These distributors decide who can sell their content in that country.
Buy from another source if your countrys itunes store does not carry somehting that you want.

How can I monitoring the usage of an index in oracle 8i

Dear Gurus,
I known the Oracle 9i have this new feature "Identifying Unused Indexes" via ALTER INDEX MONITORING USAGE, but how can I monitoring the index usage in the Oracle 8i?
Regars

You can't in 8i. However you can look at the SQL Text in the SGA looking for anything that matches the table name that the index is for and then look at the explain plan for the selects and updates. Pain in the xxx to do but it should give you the information.

What does this error message when I try to do updates mean? And how can I fix it? Thanks. The operation couldn't be completed. (NSURLErrorDomain error -1012.)

What does this error message when I try to do updates mean? And how can I fix it? Thanks. (The operation couldn’t be completed. (NSURLErrorDomain error -1012.)
James
maverick 10.9.1

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you boot, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal boot may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, reboot as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

ITunes randomly stops playing purchases that have previously viewed on the same hardware. It has an error message about HD. How can this issue be resolved? What information is available besides the "learn more" option that does not deal with the problem?

iTunes randomly stops playing purchases that have previously viewed on the same hardware. It has an error message about HD. How can this issue be resolved? What information is available besides the "learn more" option that does not deal with the problem?
Many people have the same problem. However, there is little or nothing readily available to users. This problem has existed for two or more years. Does anyone have anything to offer about this disturbing problem?

Thanks for the suggestion kcell. I've tried both versions
9.0.115 and 9.0.124 and both fail with the policy permission error.
I also tried with and without your crossdomain.xml file but
with the same result. It looks like this file is intended for URL
policy, instead of socket policy. Recently Adobe separated the two.
When I run with the files installed on my dev PC, it does
work, which makes sense because the flash player isn't loaded from
an unknown domain.
I did get one step closer. If a crossdomain.xml in the server
root exists and the socketpolicy file is loaded from the app folder
then the first two warnings disappear. The logs now show:
OK: Root-level SWF loaded:
https://192.168.2.5/trunk/myapp.swf
OK: Policy file accepted: https://192.168.2.5/crossdomain.xml
OK: Policy file accepted:
https://192.168.2.5/trunk/socketpolicy.xml
Warning: Timeout on xmlsocket://192.168.2.5:843 (at 3
seconds) while waiting for socket policy file. This should not
cause any problems, but see
http://www.adobe.com/go/strict_policy_files
for an explanation.
Warning: [strict] Ignoring policy file with incorrect syntax:
xmlsocket://192.168.2.5:993
Error: Request for resource at xmlsocket://192.168.2.5:993 by
requestor from https://192.168.2.5/trunk/myapp.swf is denied due to
lack of policy file permissions.
Which basically says, everything is okay, but you stay out
anyway.
PS: I found the XML schema files here:
http://www.adobe.com/devnet/flashplayer/articles/fplayer9_security_02.html
and the socket policy schema:
http://www.adobe.com/xml/schemas/PolicyFileSocket.xsd.
UPDATE: When serving up the policy file on port 843 using the
example perl script then the socket connection seems to be accepted
and the connect succeeds. After that flex hangs trying to logon to
the IMAP server.

I FORGOT MY IPAD4(wifi) password and it got disabled now how can i recover it?? By the way the wifi is of and the location services and find my ipad are enabled now what can i do to recover it???? PLZ HELP!!!

I FORGOT MY IPAD4(wifi) password and it got disabled now how can i recover it?? By the way the wifi is of and the location services and find my ipad are enabled now what can i do to recover it???? PLZ HELP!!!

Entering your Wifi password will not - unless I'm missing something completely - disable your iPad. The only thing which will disable your iPad that I'm aware of is entering your passcode for iPad incorrectly multiple times.
If this is the case then please see: http://support.apple.com/kb/HT1212
If you have forgotten your password for your router the WPA or WPA2 key as it's also known as they you will need to log in to your Router and setup a new WPA(2) key.
Regards,
Steve

HT4061 I just bought a new iPad min and it will not complete the initial up its been hooked up to me computer 2 days no results how can i send a photo of what it is doing apple almost complete white bar but won't go 100% ?

I just bought a new iPad min and it will not complete the initial up its been hooked up to me computer 2 days no results how can i send a photo of what it is doing apple almost complete white bar but won't go 100% ?

Greetings,
I've never seen this issue, and I handle many iPads, of all versions. WiFi issues are generally local to the WiFi router - they are not all of the same quality, range, immunity to interference, etc. You have distance, building construction, and the biggie - interference.
At home, I use Apple routers, and have no issues with any of my WiFi enabled devices, computers, mobile devices, etc - even the lowly PeeCees. I have locations where I have Juniper Networks, as well as Aruba, and a few Netgears - all of them work as they should.
The cheaper routers, Linksys, D-Link, Seimens home units, and many other no name devices have caused issues of various kinds, and even connectivity.
I have no idea what Starbucks uses, but I always have a good connection, and I go there nearly every morning and get some work done, as well as play.
You could try changing channels, 2.4 to 5 Gigs, changing locations of the router. I have had to do all of these at one time or another over the many years that I have been a Network Engineer.
Good Luck - Cheers,
M.

UWL Help - How can i create my own task within the Enterprise Portal

Dear all,
I am currently working with UWL .
I have tried the customization and those stuffs associated with UWL , and it is working properly.
My current issue is , how can create my own task within the Portal ( not using Ad Hoc Workflow , which is present in Portal) ?.
If i can create my own task within portal by API or using another method , then How can i add that task link within the drop down box that is present in the Collaboration launch pad and Mytask Workset.?
Is there any API regarding UWL (which is useful for creation of custom tasks in Portal using Developer Studio by means of Portal Application Creation) ?
How can i add that custom task in the drop down ?.
I have tried the customization of existing UWL.
I shall be grateful to those who can help me to solve this issue with links regarding the solution of my problem's.
with regards
Kishor Gopinathan

Hi Kishore,
I am trying to do the same thing. When i am creating Collaboration Task, it has standard templates in the dropdown like "Single Step" and "Multi-Step" etc., If i want to create my own Custom Task Template and display in that dropdown, how can i do that? Your help is really appreciated.
Thanks
Vijay

How can I monitor number of bytes downloaded so I don't go over my plan limit?

I have a limited number of bytes I can download per day. How can I monitor this on a daily usuage?

I think that is exactly what i need. I have downloaded and restarted firefox. I entered the user name and password I use to sign on to the internet and get a red x next to the icon and it is not working. any suggestions?

How can I get Lync 2013 to "remember" the size of my conversation window

Each time I open a Lync conversation, the window size always reverts to a default that is too small. With Lync 2010, a new conversation remembered the size of the window from a previous conversation. How can I get Lync 2013 to remember the
size from a previous conversation? I have a multi-monitor setup and would also like for Lync to remember the location of the last conversation window. Lync 2010 remembered both the size and location. I have Lync 2013 and Windows 7.

I believe what you're seeing is expected behaviour. The Lync 2013 client appears to remember the position of the conversation window relative to the Lync client itself. It seems like it is noting it's screen co-ordinates based on the clients location. This
works fine for single monitor, but ultimately means that a conversation window cannot remember it' location if it is on a different screen to the Lync client itself.
Regarding the window size - I believe this has come up before and is not something you can change either natively in Lync, or through registry manipulation.
Kind regards
Ben
Note: If you find a post informative, please mark it so using the arrow to the left. If it answers a question you've asked, please mark the thread as answered to aid others when they're looking for solutions to similar problems or queries.

How can I monitor across the enterprise what the Discoverer Activity is?

Similar Messages

Maybe you are looking for