How can I mount a server to the desktop?

When I open the Finder, under SHARED there is my old friend Communications Server. I cannot figure out how to mount a shortcut to it on the desktop.

You can only create shortcuts to individual shares on the computer, and not the computer itself. As such, open the networked computer and create an alias to one of the shared folders you see. Then put that alias on your desktop and you will be able to connect through it.
Alternatively, you can create an Automator workflow that will find, mount, and open the shared server.

Similar Messages

How can I use applet to get the desktop image of client

hi,I have a question to ask u.
How can I use applet to get the desktop image of client? Now I develop a web application and want user in the client to get his current image of the screen.And then save as a picture of jpeg format ,then upload it to the server?
I have done an application to get the screen image and do upload file to server in a servlet with the http protocal.

Since the desktop image is on the client's local hard drive, you'll need to look at trusted applets first.

How can I drag a photo to the desktop

How can I drag a photo to the desktop

Assuming you are using iPhoto....
You want to select the event that has the photo in it then click once on the photo so it is highlighted with a yellow ring around it and then click and drag it to the desktop.
If you are finding it difficult to move the file that way you can select the picture in iPhoto and select
File > Export (Command + Shift + E) and select how you want to export it (format) and where you want to put it .
Hopefully this helps you.
GL !

How can I take a widget to the desktop

I would like to take a widget to my desktop ¿Is it possible to do it in Lion?
I´ve done it before in Snow Leopard but it does not work anymore
Cheers!

Assuming you are using iPhoto....
You want to select the event that has the photo in it then click once on the photo so it is highlighted with a yellow ring around it and then click and drag it to the desktop.
If you are finding it difficult to move the file that way you can select the picture in iPhoto and select
File > Export (Command + Shift + E) and select how you want to export it (format) and where you want to put it .
Hopefully this helps you.
GL !

How can we take backup of all the RDL'S existing at Report server dynamically at one time

How can we take backup of all the RDL'S existing at Report server dynamically at one time ? I want to take backup of all the reports existing at the report server dynamically at one time only. currently I'm able to take backup of the reports folder wise
using VBScript. and I have to pass the folder names again and again. I want this to be happened for all the reports of all the folders at single shot only using VBScript.

Hi DineshRemash,
Based on my research, we can store the following VB Script to a text file, then modify the file name extension from .txt to .rss.
Dim rootPath As String = "C:\Reports"
Sub Main()
Dim items As CatalogItem() = _
rs.ListChildren("/", true)
For Each item As CatalogItem in items
If item.Type = ItemTypeEnum.Folder Then
CreateDirectory(item.Path)
Else If item.Type = ItemTypeEnum.Report Then
SaveReport(item.Path)
End If
Next
End Sub
Sub CreateDirectory(path As String)
path = GetLocalPath(path)
System.IO.Directory.CreateDirectory(path)
End Sub
Sub SaveReport(reportName As String)
Dim reportDefinition As Byte()
Dim document As New System.Xml.XmlDocument()
reportDefinition = rs.GetReportDefinition(reportName)
Dim stream As New MemoryStream(reportDefinition)
document.Load(stream)
document.Save(GetLocalPath(reportName) + ".rdl")
End Sub
Function GetLocalPath(rsPath As String) As String
Return rootPath + rsPath.Replace("/", "\")
End Function
Then navigate to the folder contains the script, we can directly run the below command from the run menu:
rs -s
http://aa/ ReportServer -i download.rss
We can modify the rootpath to point at whaterver fold you’d like to download the RDL files.
Hope this helps.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

How can I edit iCal server addresses in Mountain Lion? I keep getting an error with regards to my google calendar and I understand that the way to fix the problem is adjust the server address, but I cannot access it because the preferences are restrictive

How can I edit iCal server addresses in Mountain Lion?
I keep getting an error message with my google calendar, and I heard that if I delete the extra slash at the end of the address the problem will be fixed. But the iCal account preferences take me to system preferences > accounts every time I want to edit the account.
Does anyone know where I can edit the server address?

You should ask in the iCloud forum, this is for iMacs. https://discussions.apple.com/community/icloud/icloud_on_my_mac

How can I set BPEL server enviorment and create BPEL domain?

Without use the http console, how can I set BPEL server enviorment and create BPEL domain?
When I try to use API like below
import com.oracle.bpel.client.Server;
Server s = new Server(ServerAuthFactory.authenticate("oracle","localhost"));
But I always got four exceptions and one warning like below:
java.io.FileNotFoundException: C:\Workspace\WOSEDISystem\BPEL_Domain_Creation\config\security.properties (The system cannot find the path specified)
java.io.FileNotFoundException: C:\Workspace\WOSEDISystem\BPEL_Domain_Creation\config\ejb.properties (The system cannot find the path specified)
Warning: unable to read transaction.interoperability config property
java.io.FileNotFoundException: C:\Workspace\WOSEDISystem\BPEL_Domain_Creation\config\security.properties (The system cannot find the path specified)
java.lang.Exception: Failed to create "ejb/collaxa/system/ServerBean" bean; exception reported is: "javax.naming.CommunicationException: Can't find SerialContextProvider
Is it right to use com.oracle.bpel.client.Server like this, please help me.
Best regards,
Vita

Anyone can help me? Because I need deploy BPEL process on production server, so I need the Java funtion to create domain. Thank you very much if you can tell me the correct method of using com.oracle.bpel.client.Server API.

How can I make a server differ between two or more clients?

How can I make a server differ between two or more clients?
The clients can connect and talk to the server fine, but how can I make the server talk to one, two or all clients? i.e. what would be a good way to implement this?
Currently, the server listens for connections like this:
while (listening) {
try {
new ServerThread(this, serverSocket.accept()).start();
I guess one way would be to add the ServerThreads to a Hashtable with the client ID as key, and then get the ServerThread with the proper client ID, but this seems unnecessary complicated. Any ideas?

Complicated was perhaps the wrong word, I should have
written something like it doesn't "feel" right. Or is
this a common and good way to solve communication
between a server and multiple clients?Thats pretty much how I do it. I normally use an array or ArrayList of Sockets instead of HashTable, with [0] being the first player etc.... Then you can communicate with exactly who you want. If you want to send bytes to all of them, just send the same thing to each socket individually (or is there a better way to do this?).

How can i check my mails on the iphone and make sure that the mail wont pop up again on my computer ?

How can i check my mails on the iphone and make sure that the mail wont pop up again on my computer/ will be deleted on the server ?

For that kind of connectivity you need to be using an email account configured either as IMAP or Exchange.
IMAP & Exchange accounts will maintain a sync across all your devices, so if you read / delete a message on your phone, it will disappear from the server as well. This cannot happen in POP email accounts.
If your using gmail, instructions on how to set up exchange / imap are here http://www.google.com/support/mobile/bin/answer.py?answer=138740&topic=14252
Alternatively, if its anything other than Google, you will need to contact your email providor or IT department (if your email address resides with an enterprise environment) to get the correct settings.
Hope this helps!

How can i use dsadm to change the ldap port?

I have a ldap with port 1389,I changed it to 389,now I can not start it because it is a non root user.
Now I want to change the port back to 1389,but I can not use dsconf because the server is not running.
How can i do now? How can i use dsadm to change the port?
Thank u very much.

My apologies, I didn't mean to be rude/impolite.
I just wanted to emphasize that in a situation where a Directory Server doesn't even start, you cannot interact with the live server to configure the new port (either talking LDAP or otherwise). All you can do in that case won't be related with the LDAP (that's just the name of the protocol): either assigning network privileges to the user, or changing the Directory Server configuration file.
The other thing I'd like to outline (and this could take a separate thread ;-) ), is that semantically, I'd prefer talking of a Directory Server instead of an LDAP Server because the former is 'something' providing Directory Services, whereas the latter is just the name of the protocol we use to interact with the server; but this is just my personal opinion, you don't have to agree with me.
that's all folks!
marco

How Can i specify multiple server names in rwservlet.properties file?

How Can i specify multiple server names in rwservlet.properties file without clustering?
I am using oracle 10g Application server. we have 3 servers Repsvr1, RepSvr2 and RepSvr3. Now i need to configure rwservlet.properties file to point to these servers based on any running report. i got 3 keymap files with reports info.
Sample entry in the key map file is:
key1: server=Repsvr1 userid=xxx/yyy@dbname report=D:\Web\path1\path2\reports\Report1.rdf destype=cache desformat=PDF %*
key2: server=Repsvr2 userid=xxx/yyy@dbname report=D:\Web\path1\path3\reports\Report2.rdf destype=cache desformat=PDF %*
rwservlet.properties file letting me to enter only one servername. Even though i merged all 3 keymap files into 1, still i have the server name issue. If i leave the server to the default name still i am getting the below error.
REP-51002: Bind to Reports Server Repsvr1 failed. However, i know the default rep_<servername> would be used incase we dont have SERVER=<value> parameter in the rwservlet.properties file.
If i specify the servername in the rwservlet.properties file then only Repsvr1 reports are working fine and other 2 server reports are giving the same error like
REP-51002: Bind to Reports Server <<Server Name>> failed.
how can i configure the info which will work all 3 reports. 2 Port servers are invoking using oracle forms and report server is invoking using ASP pages.
If i specify Server name & Key map file in rwservlet.properties one at a time, all the reports are working without any error, whenever i am trying to integrate all 3 to workable i am getting binding error. if i exclude the server from rwservlet.properties still i am getting the same error.

My RELOAD_KEYMAP setting is YES only.As i said If i specify Server name & Key map file in rwservlet.properties one at a time, all the reports are working without any error.
keymap file entries
key1: server=Repsvr1 userid=xxx/yyy@dbname report=D:\Web\path1\path2\reports\Report1.rdf destype=cache desformat=PDF %*
key2: server=Repsvr2 userid=xxx/yyy@dbname report=D:\Web\path1\path3\reports\Report2.rdf destype=cache desformat=PDF %*
If i use http://server.domain:port/reports/rwservlet? cmdkey = key1 should bring the report from Repsvr1 and http://server.domain:port/reports/rwservlet? cmdkey = key2 should bring the report from Repsvr2, but i am getting an error from Repsvr2 saying that REP-51002: Bind to Reports Server repsvr2 failed.
Only Servername Repsvr1 is in rwservlet.properties file. Now what is the best option to by pass the server from rwservlet.properties file and should be from keymap file. if i comment server name in rwservlet.properties file still i am getting REP-51002: Bind to Reports Server <<Server Name>> failed error for both keys.

How can I reference a dtd in the Web-Inf directory from an xml file?

Hi,
I've placed my test.xml and test.dtd files in the following
direcory (part of my web application)
weblogic\config\MyDomain\applications\sample\Web-inf
When I refer to the dtd from the xml file, as follows,
<?xml version="1.0" encoding="ISO-8859-1" ?>
<!DOCTYPE application SYSTEM "test.dtd">
Weblogic tries to look for the dtd in the weblogic directory(the
place where I started the server from). How can I get it to read
the dtd in the Web-inf directory?
I'm using Weblogic6.0 SP1 on Windows NT 4.0
Thanks.

Two options:
1) Use SYSTEM "http://localhost:7001/sample/test.dtd"
2) Or use XML registry in WLS6.0
Cheers - Wei
"Paromita" <[email protected]> wrote in message
news:3aaff997$[email protected]..
>
Hi,
I've placed my test.xml and test.dtd files in the following
direcory (part of my web application)
weblogic\config\MyDomain\applications\sample\Web-inf
When I refer to the dtd from the xml file, as follows,
<?xml version="1.0" encoding="ISO-8859-1" ?>
<!DOCTYPE application SYSTEM "test.dtd">
Weblogic tries to look for the dtd in the weblogic directory(the
place where I started the server from). How can I get it to read
the dtd in the Web-inf directory?
I'm using Weblogic6.0 SP1 on Windows NT 4.0
Thanks.

How can i download flash player on the kindle fire

How can I download flash player on the kindle fire

andy7012 wrote:
How can I download flash player on the kindle fire
You can't.
Android (Google) dropped all support for Flash last summer. The reason is the same one Apple gave seven years ago when they released iOS: Playing Flash content is very processor consumptive and it kills batteries... as well as shortening the battery life in mobile devices.
Android recommends using either "Dolphin" or Puffin" as your browser (BOTH are free in the GooglePlay store). They use "server side rendering" of Flash content to reduce the load on your Android device.

How can i improve sharepoint server farm scalability

Hi,
How can i improve sharepoint server farm scalability, like currently 1000 users can access my SharePoint.
Now i am looking to improve my SharePoint users scalability (1000 to 2000) , How can i
do this and how can i improve my SharePoint performance
Prakash

Scale up or scale out.
Either provide your SharePoint servers with more CPU and RAM (scaling up) or add more servers to the farm (scaling out) to allow the load to be shared between the servers.
The exact breakdown depends on the details of your implementation.

How can i host a server for assetto corsa

How can i host a server for assetto corsa with log me in ?We are like 5 friends, and we are on diffrent networks Pls Help, if this is possible that is

National Instruments also offers a web UI builder, and you can learn more about it here. This allows you to build a web-based user interface for your programs. I have never used it, but it says it can compile "the code into a Silverlight .XAP file, which can then be deployed to any web server for a user to invoke from a web browser". Maybe this could run on your web server.

How can I mount a server to the desktop?

Similar Messages

Maybe you are looking for