How can I move clips in my project more accurately? i.e. Less than one frame over left or right?

Hi there
I'm trying to sync some video to some audio. I have snapping turned off, yet I cant move a frame left or right any less than one frame.
Is it not possible to move a frame anyless than one frame left or right? It still SNAPS to one frame left or one frame right.

As Jon has told you, you CAN NOT adjust video in less than a 1 frame increment.  And I honestly doubt that even if you could, that you'd see the difference in the audio synch.  In the good old days of film editing, it was only possible to adjust the audio synch for 35mm within a 1/4 of a frame (as each frame has 4 perforations) and 16mm within a frame (as each frame has 1 perf). 
The only way to avoid this problem (if it is a problem) is to genlock the cameras so the timing of each frame matches from camera to camera.

Similar Messages

  • How can I move Acrobat 9 Pro from my old MacBook to a new one?

    Hi there,
    How can I move Acrobat 9 Pro from my old MacBook to a new one?
    Thanks!

    Hi cialbert,
    Do you have the install media? If not, you can download Acrobat from here: Download Acrobat products | 9, 8 - Adobe.  You'll need your Acrobat serial number (see Find your serial number quickly - Adobe).
    Note, as well, that the licensing agreement allows you to activate the software on up to two computers. If you've already activated it on two computers, deactivate on one before installing on the new computer (see Activation & Deactivation Help).
    I think that should take care of it! Please let us know if you need additional help.
    Best,
    Sara

  • HT201528 I bought a new iMac.  How can I move my iWeb site from my old computer to my new one.  iWeb is installed on my new iMac.

    I bought a new iMac.  How can I move my iWeb site from my old computer to my new one.  iWeb is installed on my new iMac.

    iWeb stores the data in a Domain.sites2 file whose default location is shown here...
    http://www.iwebformusicians.com/iWeb/iWeb-Tips.html
    Move this to your new Mac.
    See this page for info about using iWeb with OSX 10.7 & 8...
    http://www.iwebformusicians.com/iWeb/mountain-lion.html

  • Is there a way to slide a clip less than one frame?

    Hi, When syncing audio to video, or lining up two different sources of the same audio, I sometimes find that I want to slide a clip less than one frame in the timeline. Is there a way to do this?
    Thanks, Bob

    You can slip the audio in sub-frame increments, but you cannot slip video as the frame is the basic unit.
    To slip the audio in increments less than a frame, see:
    http://documentation.apple.com/en/finalcutpro/usermanual/index.html#chapter=43%2 6section=7%26tasks=true
    MtD

  • How can I move my Events and projects to an exterior disc?

    When working in FCPX, I have been getting an alert that my (laptop) startup disc is nearly full, and I should delete files to make more space.
    How can I move my final cut events and projects to my external drive?
    I have already copied the folders Final Cut Pro Events and Final Cut Projects to a LaCie 2T drive, but I hesitate before emptying the trash on my laptop, afraid that FCPX will not be able to see my projects/media.
    I am running FCPX 10.0.5 on a MacBook ProRetina with version 10.7.5 OS
    Thanks for any help you can give me.

    In that version, as I recall, you can simply move the projects and events from one mounted drive to another working from within the FCP UI.  Since you've already  copied the files, see whether they open. You may need to use the Organize (or Consolidate – can't remember) command if your files are not all within the moved event.
    Russ

  • How can I move clips from one library to another? Clips are still in original drive and not in new drive.

    I am using iMovie 10.0.7 on a 1-week old iMac 27" running Yosemite 10.10.2. I migrated from iMovie 9 on a 2008 iMac running Snow Leopard and updated the libraries and events, etc.
    I have two external drives connected via USB. I want to move / consolidate the library and clips from one of the external drives to the new iMac's 3TB fusion drive. This is to make room on the external drive to run Time Machine backups.
    Apple's instructions on managing libraries and moving/copying clips/events tell me to drag to move between libraries and to Option-drag to copy. However, simply dragging only copies. I find that if I Command-drag the events/clips, I can "move" them. But when I look outside iMovie in the Mac OS X Finder, the event folders and clip files themselves are still sitting in the original drive.
    I'm very perplexed as to how to really move the clips and event structure. Should I manually copy the clips and event folder structure outside of iMovie? I worry I will mess up iMovie's internal record keeping and folder structure information.
    Thanks in advance.

    Ahh, Ok. I actually had to go to Lynda.com to watch a training video of this highly bassackwards maneuver, but now I have it. In other words, while the intuitive thing is to make a new event to hold the clip you want and then open the old event and drag the clip into it's new event, the only way to accomplish this maneuver is to NOT create a new event, but rather, go to the clip AFTER the one you want to move, select it and then Right-Click on it and select SPLIT EVENT BEFORE SELECTED CLIP (or go to FILE>SPLIT EVENT BEFORE SELECTED CLIP). Then you wait a few seconds while the program thinks a bit (no feedback it is doing this - just a pause) and then it automatically creates a new event with the clip you wanted. Now just double-click the new event and name it something meaningful.
    Thanks for your help!

  • How can I move a clip on the timeline less than one frame?

    I need to move an audio clip on the timeline to match the video but it snaps one frame at a time and I need to move it less than that.?

    I've just had a look.
    Try
    Edit
    Keyboard Shortcuts
    Panels
    Program Monitor Panel
    Program Monitor Panel Menu
    You should then find this:
    You can then set up your preferred shortcut key.

  • How can I move my sons songs from my iTunes account to his new one we're opening just for him?

    my son is building quite a collection on out family's itunes account. We now want him to have his own and move his songs to his new
    itunes account. how can this be done?
    Thanks,
    RKB

    It can't be done. The most you can do is ask store reps to grant those songs to newly created account, but I see that highly unlikely to be approved. Reason: for store purposes your son does not exist - just two different accounts. If they will start doing that and giving to one customer something that was purchased by another, the DRM companies will sue Apple/Itunes for every penny that was sold by them.
    http://www.apple.com/support/itunes/contact/
    here is link for e-mail contact if you still want to try. Good luck!
    P.S. to your second note. You have multiple ways for him to use that music, Just not to move to itunes account.

  • How can I Find/Replace a word on all cast members together rather than one at a time?

    I currently use Director 11.5.9 with Windows 7 64 bit
    I have some director movies I programmed years ago.  I included the file extension .dir when I used "go to movie" statements (I didn't know any better at that time).  For example, I would write, go to movie "alpha.dir".  I have now updated those movies to Director 11.5.9 and want to protect them by updating them to .dxr movies.  Obviously, the code "go to movie name.dir" won't work any more.  I need to take out the .dir extensions from every occurance in those movies.  Most all of them are cast scripts on buttons.  A few of them appear in score scripts.
    In searching this forum, I did find some tips for search/replace on ALL cast scripts, but when I attempted to follow them I did not find the options they suggested on the drop down menus.
    Can someone tell me the steps for going into a Director movie and telling the Find and Replace function to replace ALL occurences of ".dir" in Cast Scripts with ""?
    Currently, I am having to find them manually and replace them one at a time.  There are a LOT  movies with a LOT of occcurences of .dir, so this is far too slow.  I'm sure it can be done more efficiently.
    Any help than anyone can provide will be greatly appreciated.  I have a project that is coming due very soon and I don't want to delay it if possible.
    Dewey

    When you open any script in this movie and press CTRL+F it should open a search-and-replace text dialog with a "Replace all" button/option that does exactly what you are asking for - unless I've misunderstood.

  • How can I move Adobe Acrobat Pro from my old laptop to my new one?

    A few years ago I purchased Adobe Acrobat Pro. I recently purchased a new laptop. As such, I'd like to install Adobe Acrobat Pro on the new machine, however; I don't want to have to purchase it again. Does anyone know how I can move it from my old laptop to my new one?

    I feel I've explained plenty what you must do but you aren't getting it.
    All music on your old iPhone should be in your iTunes library on your computer. Transfer the music from your iTunes library on your computer to your new iPhone in the same way it was transferred from your iTunes library to your old iPhone - via the iTunes sync/transfer process.
    Since you prefer the manual way, you must manually drag and drop the same 377 songs from your iTunes library to your new iPhone - in the same way the 377 songs were manually transferred from your iTunes library to your old iPhone.
    Or you can sync which provides more options overall. Create an iTunes playlist for the 377 songs. Select Sync Music under the Music tab for your iPhone sync preferences with iTunes and choose selected playlists, artists, albums, and genres. Select the iTunes playlist below that includes the 377 songs followed by a sync.  

  • How can I move my data to a new macbook and give my old one to my child

    I am getting a new macbook air and want to give my old macbook pro 13 to my daughter.  I would like to remove all my data but keep the progrtams on it when I give it to her. I have a copy of office that is usable on up to two family computers. I have been using a 1.5Tb drive for both timemachine backup and storage of itunes movies and it is hooked up thru a thunderbolt display.
    Is there an easy way to pull all my files off the pro and move them to the air (they both have 500gb drives) and if I give my daughter the pro will she have to log in with my apple id to get the program updates?

    Doing what you recommended... now.
    I also need to (re)create the local users with a specific GeneratedUID for each one.
    I used "dscl . -read /Users/USERNAME GeneratedUID" command to get the UID of the old local users.
    What is the best way to do this
    Create the user and then update the UID?
    OR
    Create the user while specifying the UID at creation time?
    What is the command for each, i can't seem to dig up anything on google?

  • How can I get two cameras to aquire at the same time rather than one after the other

    I've got (2) PCI-1428 cards, Two Uniq Vision cameras with power supplies, cameralink cables, and IMAQ-D6804 cables. Both cameras are being triggered by the same switch, but they are not grabbing images at the same time. Right now it is triggering one camera as desired, but the other doesn't aquire until after the time-sensitive event. On the next test, the two camera will trade these roles. I am using 2 cards, so they should acquire at the same time. How do I change it so that they grab images at the same time? Thank you for your help.
                                                      ​            Deater

    Hi Deater,
    Thank  you for your post.  Triggering from two cameras at the same time may be a little trickey, but it can be done.  There are multiple ways to tackle this problem.  If you have a RTSI cable, you can RTSI the two PCI boards together internally to lock them in HW.  You should also be able to use the triggering line on each board.
    One of the best methods for triggering multiple boards is called GenLocking.  The following Developer Zone page describes GenLocking more fully and has several examples to help you out: http://zone.ni.com/devzone/conceptd.nsf/webmain/a3​87b5c0ac6f6f4e86256c87005fcddf.
    The "HL Grab with two boards.vi" shipping example is also a good example of the code needed to trigger two individual boards in LV.  I found a similar post that may be of some help as well: http://forums.ni.com/ni/board/message?board.id=230​&message.id=2691&requireLogin=False
    Hope this helps!
    Thanks,
    Scott Savage
    National Instruments
    Applications Engineering
    www.ni.com/support

  • How can I move a clip from one movie to another

    How can I move a clip from one movie to another?

    If it's just a clip, you can simply go to the other project and Add Media/From Files and Folders.
    But if it's a part of your movie -- say a sequence of clips or a clip that's had effects added to it -- you technically can't cut and paste betweeen projects in Premiere Elements. However, some people have been able to do it using the third party program ClipMate, available online.

  • How can i move video and music and narration all at once in the project library

    how can i move video, narration and music all at once in the project library  it is only moving the video

    Select the directory with your pngs in it.
    Right-click>Browse with Adobe Bridge
    Select your pngs
    Tools>Photoshop>Load to photoshop layers (not sure how many layers this can handle--you may wind up having to do this in batches)
    Save your new psd
    In Flash, create a new symbol with a blank timeline
    Ctrl-R, navigate to the psd you made earlier
    Select all the Photoshop layers
    Check "create MovieClips for these layers."
    Convert layers to keyframes or flash layers (not important, since you probaby don't need to keep this symbol)
    OK
    You'll have Movie Clips, not Graphic Symbols, but maybe you can write or find a JSFL to convert them and then you can block select them, click the Properties button, and change the type from MovieClip to Graphc.

  • How do I move clips between projects?

    Should be a simple enough task but, how do I move clips made in one project to another project?

    clip media is not conained within a project per se, rather it is referenced by a project, so as long as the media is on the hard disc then it can be referenced by as many projects as you'd like.
    you can open multiple projects simultaneously ... then to move clips between the projects you can just drag and drop between the various projects' bins, or copy and paste if you prefer.

Maybe you are looking for

  • Is it possible to "export" the advance catalog research results ?

    Hello, I use Acrobat Pro 9 on windows xp. Is there any method to select & "export" all the results of an advance research to create (for example) a "porte documents" in one time, or to copy at once the documents in a different folder, or to print the

  • Gray box around images in PDF and when printing? Why?

    Hi, I'm using CS5 and I'm getting a gray box around any image embedded in my document.  The box comes if I click on it when a PDF and it prints around them.  I can't seem to figure this one out.  I'm not used to prepping files for print and I'm tryin

  • DBMS_SCHEDULAR JOB STICKINESS ON PARTICULAR NODE IN RAC

    Hi All, I am using 10g rac . We have scheduled gather stats on node 1 from OEM with instance stickiness is False. but it is  running on node2  sometimes  . When it runs on node 2 , node 1 is up and running with lightest load. I am confused why it is

  • Using img tag with htmlText

    I'm trying to display images within mx:Text components using htmlText.  However, no matter what I try, I can't get an image to display.  The application just displays whitespace where the <img> tag is.  My current code looks something like:          

  • When exporting as Microsoft Word, headers and footers created incorrectly

    Using Acrobat X, I converted a PDF file to Microsoft Word 2007 format. I selected "Flow Layout" because I'm writing automated software that reads Word documents and flow makes it easier to process. In case you're wondering, I don't read PDF directly