How can i navigate to a webpage in project siena

Hello,
You can use
Launch(“http://www.bing.com”)
This will load the webpage in the default system browser.
In the current release there is no control in Siena to load a page within Siena itself
Regards
StonyArc

Similar Messages

How can i navigate via navigational link between views in different windows

hello
i am using CRM_UI and have opened a popup
gv_transcr_popup is a attribute referrring to if_bsp_wd_popup in my implementation class
gv_transcr_popup = comp_controller->window_manager->create_popup(
    iv_interface_view_name = 'AIC_CM_TRANS/AssignTranspReq' "#EC NOTEXT
    iv_usage_name          = 'CUBAssignTransporReq'         "#EC NOTEXT
    iv_title               = lv_title ).
get instance of BOL dynamic query
lo_qs = cl_crm_bol_dquery_service=>get_instance( 'BTQAIC_CM_TRANSPORTREQ').
gv_transcr_popup->set_on_close_event( iv_view = me iv_event_name = 'AssignTranspReq' ).
gv_transcr_popup->set_display_mode( if_bsp_wd_popup=>c_display_mode_surrounded ).
gv_transcr_popup->open(   ).
through the iv_usage_name i will open in this popup a search view from another window
in this window is a searchview implemented and now after selecting the line in the result view in want to navigate through outbound plug / inbound plug to the starting view .
but i get the exception
Target view AIC_CM_TRANS/TransportReq of the navigation is not assigned to the current window AIC_CM_TRANS/AssignTranspReq ( which is true)
now the question: how can i navigate between views of different windows?
Best Regards
britta

hi
i have found a way : you have to use a outboungplug from the windows interface ..then it is working
best regards
britta

How can we navigate between two windows of same component in webdynpro ABAP

Hi
how can we navigate between two windows( not views ) of same component in webdynpro ABAP. its an urgent requirement
Thanks in advance.
Regards
Laeeq

Hi Laeeq,
You cannot navigate between windows of one component. You can only call a dialog box showing the contents of a second window, or you can embed the contents of a window of a different component.
Just add all the views you need to the one and only main window of the component.
Ciao, Regina

How can i navigate between windows?

Hi.
Experts
I want to navigate between windows.Because i am making a project of Guest House management in webDynpro.So many many screens are there to built and link.I am planning to make a single webdynpro component for it.
Is this right?If yes Tell me how can i navigate between windows.
(like room request to allocate room and many other window).
Regards
Sunny.

HI Sunny
If You want to make a window DEFAULT follow these steps
1) Suppose if you have 2 windows say Window1 and Window2
2) Double Click on your Application
3) In Application Properties -->Interface View
you will get two interface views Window1InterfaceView and Window2InterfaceView
4) Select which ever window you want to make as default
and make your view in desired window's DEFAULT property to true
Best Regards
Chaitanya.A

How can i navigate system preferences if trackpad is not working somehow the option were unchecked

How can i navigate system preferences if trackpad is not working?
Somehow the first couple of trackpad functions were unchecked and since they are not operational I can't click or tap to turn them back on.
I've tried shutting down and restarting and holding my hand on the trackpad for 3-4 sec. then sliding it off (another post had this suggestions).
I don't use the function keys at all to navigate the computer so I am at a total loss if the trackpad does not work.

Thanks for the response.
Unfortunately this did not work - the tap to click is still not checked - and the tap function does not work.
I did try it twice - and even used a stopwatch to be sure I got the time right.
I noticed there is also an instruction to reset PRAM (was with the SMC reset instructions). Is that something that may help?

How can I make my flash Webpage displayed same size on any screen resolution?

Hi,
How can I make my flash Webpage displayed same size on any screen resolution of my computer? Whether it is 1024 X 768 or 1280 X 960 screen resolution, the size of Webpage (Flash Webpage) should always be same so that user don't need to use horizantal scroll bar to view all the content.
And secondly, how can I scroll my webpage vertical on moving with my mouse like in the following link: The below link also shows that it's webpage size is always same on any screen resolution.
http://www.matkostankovic.com/#/portraits/oliver-mlakar/http://www.matkostankovic.com/#/about/
Thanks.

Hi,
Please do help me.
Waiting for response from anybody who can help me.to solve this problem.
Thanks.

My iPhone is stolen and reformatted by the thief aside from Find iPhone how can I navigate my phone? I'm literally crying

My iPhone is stolen and reformatted by the thief aside from Find iPhone how can I navigate my phone? I'm literally crying!

Find my iPhone is the only way to track it. If you had it turned on, and it was running iOS 7 or 8, then take comfort in knowing that it will be useless to the thief, even if they restored iOS. They will be unable to activate it without your Apple ID and password.

How can I move a photo from one project to another

How can I move a photo from one project to another without creating a duplicate so I have the same photo in two projects.
I seems to me in the past when I moved the photo from project 1 to project 2, I would get a number showing the # of photos being moved and you could drag and drop in the 2nd folder and the photos would disappear from project 1 and show up in project 2. is there a setting I am missing. Now when I drag and drop the photo no red # shows up and the photo stays in project 1 and also shows up in project 2 apparently creating a duplicate.
Any suggestion?

Now when I drag and drop the photo no red # shows up and the photo stays in project 1 and also shows up in project 2 apparently creating a duplicate.
The projects are the basic containers. Each image and all its versions are in exactly one project.
You can use an image in many albums, without duplicating it, also in many products like books, screensaver, slideshows. But the projects are the basic structure of the library and you cannot have the same image in two different project, without duplicating it by storing the same original image files twice. Use albums to organize your library thematically.
Sorry, I misread your question. Dragging an image file between projects should move the image and all its versions to the other project. Aperture should only duplicate the image, if you hold down the alt/options key while dragging and move the image otherwise.
Which Aperture version are you using? And which MacOS X version? Is your profile signature "MacBook Pro with Retina display, Mac OS 9.2.x, Aperture 3.5.1" still valid?
In Aperture 3.6 on MacOS X 10.10.1 dragging between projects is still working as expected:

How can I burn a copy of my project to a DVD . I do not have IDVD because I have the Lion os. I did purchase Wondershare for burning but it will not load the iMovie events or projects

How can I burn a copy of my project to a DVD . I do not have IDVD because I have the Lion OS. I did purchase Wondershare for burning but it will not load the iMovie events or projects

There is no proper substitute for iDVD.
Why is there no iDVD on my new Mac?
https://discussions.apple.com/docs/DOC-3673
UPDATE & ADDENDUM:
But even though you can still buy iLife 11 that includes iDVD 7 from Amazon, Apple now make it difficult to install:
Poster jhb21939 posted this in another thread:
“when I attempted to load iDVD into a new iMac. A notice came up on the screen stating that the 'Authorisation Licence' had expired on 25 March this year (2012).
I contacted the Apple support team and eventually, I was told that the Licence had been withdrawn and could no longer be used.”
In other words Apple are now so adamant that we don’t use iDVD that they have tried to make it impossible to install.
In response, Old Toad posted this solution:
“You can still use it one all of your Macs. If you get an invalid certificate message just set your Mac's clock to sometime before early 2011 and run the installer. After you're done reset the time back to the correct time.” He added this comment:
“It began after iDVD and iWeb were discontued and they were dropped from the Apple Store. All I can think of is the certificate was set to expire after a certain time period after the intitial iLife disc was released.
I've been able to use the installer even without setting back the date. I just clicked on the Continue button and it would work as expected. For some it would not continue unless the date was set back.”
The latest anorexic iMacs just announced do not even include a CD drive! Proof positive that Apple virtually prohibit the use of DVDs - although the newly announced Mac Minis do include a Superdrive.
Yet, they still include iMovie! Heaven alone knows or understands what you are supposed to do with your newly edited masterpiece - except make a low quality version for YouTube?

How can I save controller assignments with a project?

How can I save controller assignments with a project, so that I can use different controller assignments for the same synth in another project
Let's say I am controlling a Logic instrument with MIDI and CC data sent from MaxMSP. I have created a composition and would now like to make another one, with new assignments of controllers, in a new project. Is it possible to save the first piece's c.a. with it's project, so that I can switch between projects and have the controller assignments switch accordingly? Is that something that's become possible in Logic X with Smart Control or another workaround?
Thanks a lot for any hints!

With standard instruments you can cable transformers before the objects translating incoming cc's to "fader" events.
With the new plug-ins they've hacked into Logic (ultrabeat, sculpture) this isn't possible, so your stuck with the "controller assignments" window which to me seems to be aimed at dedicated control surfaces and autoloads. My experiences with the controller assignments window aren't good, as i've found it drops incoming messages quite often.
Knowing how to do this(controller assignments per song) would give me a reason to open the controller assignments window again..Pretty useless to me otherwise.

I want to break up my hour long video in iMovie 11 into smaller 15 minute segements to upload to youtube. How can i put EDITED VIDEO in new projects in iMovie?

I want to break up my hour long video in iMovie 11 into smaller 15 minute segements to upload to youtube. How can i put EDITED VIDEO in new projects in iMovie? (each 15 minute segment to iMovie)

In iMovie's Project Library view (where all your projects are listed), click on the name of your project (don't double-click to open it, just single click to highlight it).
From the Menu select File > Duplicate Project. A copy of your project will be placed in the Project Library. It will have the same name as the original, but with a number appended. You can rename it if desired - click on its name twice (not double-click) so that it is highlighted as light blue, then over-type it.
Delete from the duplicate all the clips and other media (for example, photos, music and so forth) that you don't want included in the first of your 15 minute segments. In other words, delete all but the first 15 minutes.
Continue creating duplicates of the original (and rename if necessary). Delete from each duplicate all the unrequired parts for each segment. So, for example, for the 2nd duplicate delete the first quarter (15 minutes) and the 3rd and 4th quarters.
You should end up with 4 duplicates with separate names, each containing the required segment. You will also have kept intact the original one hour movie, which you may wish to use independently of YouTube (maybe for burning a DVD or playback through a Media Player).
Note that duplicating the original project will not take up much extra space on your drive. Projects reference (link to) the associated Event (or Events) in the Event Library - they don't actually contain video as such. The project file also keeps track of titles, transitions, effects, music and so forth that you've added to the project.
John
Message was edited by: John Cogdell

Can I convert Facebook time Text to Project Siena's Date value ?

Can I convert Facebook time Text to Project Siena's Date value ?
I want to show create_time on screen by my Localtime formatted text.
Facebook time Text = 2014-07-14T11:22+0000
I want to show = 2014/07/14 18:22
My Time Zone is +09:00, Osaka/Japan.
Currently I try it by Text/Replace/Replace/Replace/Left/DateValue/+ , etc.
And I ask more simple way.
Regards,
Yoshihiro Kawabata

Thank you Andy , and Robin, I can.
Text(TimeValue(Substitute(ThisItem!created_time,"+0000",".000Z")),"yyyy/mm/dd hh:mm")
At Facebook Albums's Gallary, I can convert from Facebook created_time to Localtime Text DateTime.
and I hope more easy way like Excel Power Query's one.
Regards,
Yoshihiro Kawabata

Can I convert Twitter time Text to Project Siena's Date Value ?

Can I convert Twitter time Text to Project Siena's Date Value ?
I want to show localtime of Twitter created_at.
Twitter time text = ThisItem!created_at , ex: Tue Jul 15 17:19:00 +0000 2014
I want to show 2014/07/16 02:19 by Japan localtime.
Regards,
Yoshihiro Kawabata

Siena uses JavaScript to parse date/times, via the TimeValue function. A good specification regarding what is acceptable can be found here:
https://developer.mozilla.org/en-US/docs/Web/JavaScript/Reference/Global_Objects/Date/parse
The example above is truly bizarre: I thought I had seen it all. You will need to turn that form into one of those listed on the above site, using string functions to chop it up and reassemble it into a saner form.

Can I update Twitter Timeline Gallary in Project Siena ?

Can I update Twitter Timeline Gallary in Project Siena ?
I want to update Twitter Timeline Gallary by 60 second each.
Gallary's Data = Twitter!Timeline()
"Refresh(Twitter!Timeline())" is NG.
Regards,
Yoshihiro Kawabata

Hi Yoshihiro,
There are a couple of ways to do this. Add a timer control to your app. Now set the following properties on the timer control:
Data > Repeat: true
Data > AutoStart: true
Behavior > OnTimerEnd: Clear(C); Collect(C, Twitter!Timeline())
Behavior > OnTimerStart: Clear(C); Collect(C, Twitter!Timeline())
Setting Repeat to true causes the timer to keep cycling from 0 to 60 seconds. Setting AutoStart to true causes the timer to kick off when you visit the screen. Both, when the timer starts off (OnTimerStart), and when it hits 60 seconds (OnTimerEnd), you're
clearing the collection C and then collecting the Twitter!Timerline data into it.
Now, bind the Data > Items property of your gallery to C.
Please note that with the above settings, Twitter will soon return a "Rate limit exceeded" error due to the frequency of your calls.
Thanks
Robin

Can I connect Azure SQL Database from Project Siena ?

Can I connect Azure SQL Database from Project Siena ?
I want to connect Azure SQL Database of Office 365 SharePoint's Access App from Project Siena.
Access App's Database is Azure SQL Database.
and can connect to Excel/PowerBI/etc.
Access App's Database can connect from specific location / any locations.
Access App's Database can allow read-only connection / read-write connection.
I want to create Windows App connected to Access App's Database.
Regards,
Yoshihiro Kawabata.

Hi Yoshihiro,
Could you share more with us about the high level scenario for what you are trying to accomplish offline? We can discuss further at
[email protected]
Once we are done, we will definitely share our findings with the community.
Thanks!

How can i navigate to a webpage in project siena

Similar Messages

Maybe you are looking for