How can I obtain a return receipt using Mail?
I have never had to use a password as the administrator of my imac. I simply clicked OK without filling it in and it worked just fine. I downloaded Mavericks, and I was asked to enter the password as the administrator. I cannot do so. How do I fix this?
I'm confused. Your question has NOTHING to do with the subject title.
1) You cannot obtain a return receipt using Mail. That functionality does not exist.
2) If your admin password is blank, then just hit return. I cannot believe you have NEVER seen an administrator password prompt in normal use of the OS, unless you've only used OS X for an hour total.
Similar Messages
-
How can I obtain a receipt for the purchase of my Time Capsule back up external drive. My drive was stolen and I am trying to find the serial number of the device.
Unless you registered it, for warranty purposes, with the manufacturer, there's no way.
Or if you have the box it came in, the box may have the S/N.
Cheers, Tom -
How can I request a return receipt when sending email from Leopard Mail?
Has anyone found a way to request return receipts when sending email with Leopard Mail?
see this [link|http://discussions.apple.com/thread.jspa?messageID=7244096�].
However,
this is only possible if the email client of the e-mail receiver supports this feature and it is turned on. if it doesn't support it or it supports it but the feature is turned off there is absolutely nothing you can do. -
How can I make the return receipt and deliver status notification work ?y
I have checked marked "return receipt" and "delivery status notification" when doing emails.
Doesn't seem to be working.
Please helpare they not working, or has the recipient simply declined to send them? That is the real question. Sending mail to yourself rarely triggers the return receipt
-
HT2500 How do I get a return receipt with Mail?
I want to be sure that someone reads the e-mail I am sending. In my old system (Windows Outlook) I was able to check a box to get a return receipt. I've looked all over Mail, including the help system, and can find no instructions on this. I can't imagine this important feature has been omitted from the program, but I cannot find it anywhere!
Terrible fail, Apple help!
Anyone out there know how to do this? Thanks for the help!
Best Regards,
JimAustin,
Thanks for the info. I was vainly hoping Apple actually had the feature in the program. Sadly, this looks like a fail all the way 'round. I know a return receipt doesn't guarantee anything, but it at least gives me some level of knowing someone got the message. Sadly, Apple simply doesn't support the feature.
Fail, Apple. Fail!
Jim -
How can you keep your iPhone 4 (using it as my car's iPod) staying on the Audible app? When I leave the car and return to continue hearing a book, it has switched to iTunes.
The first time an iPhone is connected to iTunes that is used to sync with another iPhone or iOS device, you are prompted to transfer the backup for the other iPhone or iOS device or to set up the iPhone as a new iPhone.
The former does as provided - it transfers the backup for the other iPhone or iOS device to the iPhone replacing all data on the iPhone that is included with the backup being transferred. The latter does nothing allowing you to make your various selections for the iPhone sync preferences with iTunes.
This is designed to be done right away with a new iPhone.
If you don't have a backup for the iPhone with iTunes on your computer and don't have an iCloud backup that hasn't been updated since choosing to transfer the backup for your iPod Touch to the iPhone, the data that was on the iPhone is gone. -
How can I obtain numeric subtotals in a spredsheet already sorted by catagory? Am using version 3. This process was fairly straight forward in previous versions.
SUMIF or SUMIFS function?
-
How can I obtain my licenses if another email address was used for the purchase?
How can I obtain my licenses if another email address was used for the purchase?
Hi 79bison,
Welcome to Adobe Forum,
You will have to log in with to www.adobe.comfor retail purchase or licensing.adobe.com if Volume licenses with the E-mail with which it is registered
Then you can retrieve the serial number, you can opt for transfer of license to get it registered with your Email, if applicable & eligible.
You can contact Adobe Support for further assistance at http://adobe.ly/yxj0t6.
Hope it helps you.
Rajshree -
How can I obtain the coefficients m, b from MAX scale?
I use CWAI ActiveX for acquire data. Also, I use MAX to set the virtual channels for CWAI. When I try to use scale option of MAX (for exemple y = 0.5x + 3 to transforn volts in my phisics values) I obtain true data from ScaledData (phisics values), but I can't obtain true data from (BinaryCodes x GetScaleMultiplyer) + GetScaleOffset. How can I obtain true value from binarycodes?
How can I obtain m and b from ActiveX?drg,
The GetScaleOffset & GetScaleMultiplier refer to the hardware factors used by the driver to transform the binary values produced by the ADC converter to actual Voltage values (not physical units of the Virtual Channel).
The documentation (NI-DAQ 6.9.3) for the ScaleMultiplier property mentions this:
"Returns the slope in the linear scaling formula for converting the binary codes of the analog-digital converter to voltages. The CWAI control multiplies the binary code by the ScaleMultiplier and adds the ScaleOffset to convert a binary code to a voltage.
(BinaryCode * ScaleMultiplier) + ScaleOffset = Voltage"
If the signal range was, for example +/- 5 V, the multiplier for a 12 bit board would be approximately 0.00244141 so that:
2047 * 0.002441
41 = 5V
NOTE: The 12 bit range (4096 words) is divided into +2047 / -2048
Unfortuantely there is not a function or method in the CWDAQ API to obtain or set parameters from the Custom Scales used by the Virtual Channels.
The reason for this is probably due to the fact that once Virtual Channels are created, most users would read in scaled values directly rather than reading binary values, getting the scale constants and applying the custom scale themselves. Since the user specifies the values for the custom scales anyway, the application could as well store the scaling constants as part of its configuration.
Still, it would be nice to have this functionality so I thank you for pointing this out. I will create a suggestion indicating the need for such functions.
The ways to achieve the results you desire are:
1) Use Virtual Channels and read scaled data
or
2) Use the ScaleMultiplier and ScaleConstants to transform binary values into actual voltage values. Once
you obtain the voltage values you can manually apply the same custom linear scale you had created through MAX.
Regards,
Alejandro Asenjo
Applications Engineer
National Instruments -
Hi,
I need obtain the source code of one webpage (the page is http://www.banxico.org.mx/tipcamb/tipCamIHAction.do).
Until now, i obtained the source code of pages with the function module SCMS_HTTP_GET_WITH_URL, but this page return the code 404 (Not found). The esception is: Access error HTTP: IF_HTTP_CLIENT->RECEIVE 1 ICM_HTTP_CONNECTION_FAILED
How can i obtain the source code of this page? Exists other function module o class for this?
Best regards and, thanks!amy be
1. the site was down when you called.
2. your ICM was down.
3. some authentication is required from your environment to call internet (proxy) which is missing in your call.
Exists other function module o class for this?
you can use cl_http_client class for the same -
How can I disable POST GOODS RECEIPT button in transactions VL31N/VL32N via Authorization or Role Level, There is a requirement from my client and i propose two methode
1- Creation of Ztcode ZVL32N and do changes ABAP program level
2- Disablement via Authorization/Role level - but how can i find the auth object/ Authorization corresponds to POST GOODS RECEIPT button in VL32NI think you can make use of SHD0 - Transaction variant to achieve this. You can make it as grayed out while recording steps in SHD0.
-
How can we know the return code of BDC Program ?
Hi All,
Please tell me : How can we know the return code of BDC Program when being exceuted in Session or in Transaction mode.
In my program, we are uploading data from Excel sheet to SAP via BDC
The records that are not updated we want to create a log file.
Now to know whether a record is updated ot not, wat syst field shloud be used?
Its urgent....
<b>Reward Point will be there ....</b>
Thanks,
HarishHi harish,
try the logic in this code ...
i had attached input file in the end.
TYPES: begin of errmess,
msgnr type t100-msgnr,
text type t100-text,
end of errmess.
TABLES : t100.
DATA: BEGIN OF DD_VA01,
AUART TYPE VBAK-AUART,
KUNNR TYPE RV45A-KUNNR,
BSTKD TYPE VBKD-BSTKD,
MABNR TYPE RV45A-MABNR,
KWMENG(2) type C,
KBETR(2) type C,
END OF DD_VA01.
DATA:IT_VA01 Like TABLE OF DD_VA01,
WA_VA01 Like LINE OF IT_VA01,
WA_VA01_F Like LINE OF IT_VA01,
IT_BDCDATA TYPE TABLE OF BDCDATA,
WA_BDCDATA Like Line OF IT_BDCDATA,
W_FNAME TYPE STRING,
messtab like bdcmsgcoll occurs 0 with header line,
it_errmess type table of errmess,
wa_errmess like line of it_errmess,
err_message type string.
data: zf1 type i,
zc1 type c value '2',
fn(20) type c.
Main Code ************************************************************
PERFORM get_input using 'C:\Documents and Settings\ic881592\Desktop\Daran_bdc_VA01-e.txt'.
SORT IT_VA01 BY AUART KUNNR BSTKD.
LOOP AT IT_VA01 INTO WA_VA01.
if WA_VA01_F-AUART <> WA_VA01-AUART OR
WA_VA01_F-KUNNR <> WA_VA01-KUNNR OR
WA_VA01_F-BSTKD <> WA_VA01-BSTKD.
PERFORM set_header_flag.
PERFORM create_bdc_header_data.
endif.
PERFORM create_bdc_item_data.
ENDLOOP.
PERFORM call_transaction.
PERFORM errorlog.
Procedures ***********************************************************
form get_input using w_fname.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
FILENAME = W_FNAME
HAS_FIELD_SEPARATOR = '#'
TABLES
DATA_TAB = IT_VA01.
endform.
form call_transaction.
PERFORM bdc_field using 'BDC_OKCODE' '/11'.
CALL TRANSACTION 'VA01' USING IT_BDCDATA MODE 'A' messages into messtab.
refresh it_bdcdata.
endform.
FORM set_header_flag.
WA_VA01_F-AUART = WA_VA01-AUART.
WA_VA01_F-KUNNR = WA_VA01-KUNNR.
WA_VA01_F-BSTKD = WA_VA01-BSTKD.
if zf1 = 1.
PERFORM call_transaction.
endif.
zf1 = 1.
endform. "set_header_flag.
form create_bdc_header_data.
perform bdc_dynpro using 'SAPMV45A' '0101'.
perform bdc_field using 'VBAK-AUART' WA_VA01-AUART.
perform bdc_field using 'BDC_OKCODE' '/00'.
perform bdc_dynpro using 'SAPMV45A' '4001'.
perform bdc_field using 'KUAGV-KUNNR' WA_VA01-KUNNR.
perform bdc_field using 'VBKD-BSTKD' WA_VA01-BSTKD.
perform bdc_field using 'BDC_OKCODE' '/00'.
perform bdc_dynpro using 'SAPMSSY0' '0120'.
perform bdc_field using 'BDC_CURSOR' '04/06'.
perform bdc_field using 'BDC_OKCODE' '=CHOO'.
perform bdc_dynpro using 'SAPMV45A' '4001'.
PERFORM bdc_field USING 'BDC_OKCODE' '=POAN'.
endform. "create_bdcdata
FORM create_bdc_item_data.
CONCATENATE 'RV45A-KWMENG(' zc1 ')' INTO FN.
perform bdc_field using 'BDC_CURSOR' FN.
perform bdc_field using FN WA_VA01-KWMENG.
CONCATENATE 'KOMV-KBETR(' zc1 ')' INTO FN.
perform bdc_field using FN WA_VA01-KBETR.
CONCATENATE 'RV45A-MABNR(' zc1 ')' INTO FN.
perform bdc_field using FN WA_VA01-MABNR.
perform bdc_dynpro using 'SAPMV45A' '4001'.
PERFORM bdc_field USING 'BDC_OKCODE' '=POAN'.
ENDFORM.
form errorlog.
LOOP AT MESSTAB .
if MESSTAB-MSGNR = '311' or MESSTAB-MSGTYP = 'E'.
SELECT SINGLE msgnr text FROM T100
into wa_errmess
WHERE SPRSL = MESSTAB-MSGSPRA
AND ARBGB = MESSTAB-MSGID
AND MSGNR = MESSTAB-MSGNR.
IF SY-SUBRC = 0.
err_message = wa_errmess-TEXT.
IF err_message CS '&1'.
REPLACE '&1' WITH MESSTAB-MSGV1 INTO err_message.
REPLACE '&2' WITH MESSTAB-MSGV2 INTO err_message.
REPLACE '&3' WITH MESSTAB-MSGV3 INTO err_message.
REPLACE '&4' WITH MESSTAB-MSGV4 INTO err_message.
ELSE.
REPLACE '&' WITH MESSTAB-MSGV1 INTO err_message.
REPLACE '&' WITH MESSTAB-MSGV2 INTO err_message.
REPLACE '&' WITH MESSTAB-MSGV3 INTO err_message.
REPLACE '&' WITH MESSTAB-MSGV4 INTO err_message.
ENDIF.
CONDENSE err_message.
WRITE: / MESSTAB-MSGTYP, err_message .
ELSE.
WRITE: / MESSTAB.
ENDIF.
endif.
ENDLOOP.
endform. "errorlog
FORM BDC_DYNPRO USING PROGRAM DYNPRO.
WA_BDCDATA-PROGRAM = PROGRAM.
WA_BDCDATA-DYNPRO = DYNPRO.
WA_BDCDATA-DYNBEGIN = 'X'.
APPEND WA_BDCDATA TO IT_BDCDATA.
CLEAR WA_BDCDATA.
ENDFORM.
FORM BDC_FIELD USING FNAM FVAL.
WA_BDCDATA-FNAM = FNAM.
WA_BDCDATA-FVAL = FVAL.
APPEND WA_BDCDATA TO IT_BDCDATA.
CLEAR WA_BDCDATA.
ENDFORM.
input file :
OR 2148 0001235 R-1162 8 17
OR 2148 0001235 R-1161 2 30
OR 2148 0001235 100-400 6 25
OR 2148 0001235 R-1162 4 12
OR 2148 0001236 R-1162 3 12
OR 2148 0001236 R-1161 2 30
OR 2148 0001236 100-400 1 25
OR 2148 0001236 R-1162 7 12
OR 2148 0001236 R-1161 8 30
OR 2148 0001236 100-400 10 25
OR 2148 0001235 R-1161 5 30
OR 2148 0001235 100-400 2 25
OR 2148 0001235 R-11621 3 12
OR 2148 0001235 R-1161 2 30
OR 2148 0001235 100-400 1 25
OR 2148 0001235 R-1162 7 12
OR 2148 0001235 R-1161 8 30
OR 2148 0001235 100-400 10 25
OR 2148 0001236 R-1162 8 17
OR 2148 0001236 R-1161 2 30
OR 2148 0001236 100-400 6 25
OR 2148 0001236 R-1162 4 12
OR 2148 0001236 R-1161 5 30
OR 2148 0001236 100-400 2 25 -
How can I obtain the value of a database column in a JSP variable ?
How can I obtain the value of a table column in a JSP variable?
For example the <jbo:ShowValue datasource="cl" dataitem="Cont" ></jbo:ShowValue>
I need to have it in a variable like this:
<% String cnt=<jbo:ShowValue datasource="cl" dataitem="Cont" ></jbo:ShowValue>; %>
But it is not workig this way.
Please help me to obtain the value.
I am using JDev RC2.
Thanks.Try something like
String cnt = c1.getRowSet().getCurrentRow().getAttribute("Cont").toString();
-A
How can I obtain the value of a table column in a JSP variable?
For example the <jbo:ShowValue datasource="cl" dataitem="Cont" ></jbo:ShowValue>
I need to have it in a variable like this:
<% String cnt=<jbo:ShowValue datasource="cl" dataitem="Cont" ></jbo:ShowValue>; %>
But it is not workig this way.
Please help me to obtain the value.
I am using JDev RC2.
Thanks. -
How can I obtain a version of Print Studio Pro that works with Photoshop Elements 13 (64 bit)?
How can I obtain a version of Print Studio Pro that works with Photoshop Elements 13 (64 bit)? The advertising refers to Print Studio Pro 2 but all I find available to download is version 1.35.
Thanks - I did notice that the 2 was a superscript on one site but on another (I think the one for the Pro-10 printer) it was definitely a 2 in line with the rest of the text and separated by a space (at least on my browser). At any rate, I suspected something of the kind and will simply use Photoshop Elements 11 when I want a pattern print until the change is made.
If you have an inside line to Canon you might also suggest some changes to their Image Garden program, specifically its handling of DVD label projects. It has several themes and within each theme several layouts. As far as they go these are fine but they do not give nearly enough flexibility. The boxes for insertion of images are useful as is the simple procedure for rescaling the image so it is cropped in varying ways while staying within the fixed box. However, it should be possible (a) to relocate the boxes on the page and (b) to resize and reshape the boxes - probably by a control which would become available by right-clicking on the box. For example, there are times when the user might want to include a full 16 x 9 frame shot as one of the images, and in general the aspect ratios of the provided boxes do not permit this.
I have over the years preferred to use Word for this purpose after setting up masks to expose just the printable area of the DVD or Blu-ray disc, setting up the margins so that the center of the disc is in the horizontal center of the page, and finally introducing text and pictures and adjusting the font size of blank lines above the disc to line everything up properly in the vertical direction. A typical layout might involve one large picture, located so the center hole and the curved outer edge do not block anything important, or two pictures side by side, or four pictures centered vertically (to minimize the effect of the outer edge of the disc) but possibly of different widths (so as to make both close-ups and wide scenes optimal on the same disc label). The text then goes above and below the pictures. All of this works perfectly so I probably wouldn't use Image Garden very often for this purpose, but the inability to resize and relocate the boxes must be very limiting for others as well.
Some of the layouts have image locations severely reduced by the edge of the disc.
As I said ... if you have an inside line to Canon .. but if not, please excuse the length of this post! -
How can a responsible eleven year old use an ipod? I do not want to 'follow the flow' as I have been instructed to do by other parents in order to obtain an apple id for her by changing her birth year. I believe in truth. I believe that even a 'little white lie' simply adds a burden in our childrens hearts and allows them to think it is okay. As I was told, "It is okay, how is Apple going to find out?" I do not want to travel that path. Her friends have ipods, our 9 year old cousin has an ipod....Help, Honest Mom in need of a solution.
She can use an iPod. She just can't have her own account in the iTunes Store. The restriction is on using the iTunes Store, not on using apps or playing content purchased from it. You just need to set up an iTunes Store account and buy items for her rather than having her do it on her own.
Regards.
Maybe you are looking for
-
How to set up two iPhones on same account in Find Friends
I have tried to add a second iPhone5 to Find Friends, each time it tell me I can't send a request to myself.
-
Hi, Under the Plant 6000, We had a valuation class 9634, Gl accounts were created assigned and moved to production. As per the Client requirement, they want to shutdown the previous plant and start the new one. They want to assign the same GL Account
-
I can't open my Spot Light preferences or Mail after wipe and restore from TM
I had to wipe my hard drive, re-install Lion (not ML [I couldn't post specifically for Lion]) and then I restore my documents from my Time Machine Backup. I had two users, a diag user and my normal user, only my diag user was "recovered" from time ma
-
ABAP coding required in order to send Output via External Send (5)
Hi I require some coding to an ABAP program in order for my SD output to be succesfully sent by 'external send' I have a shipping output type. assigned Partner functions and applicable mediums - 1, 2 and 5 however when trying to produce output via co
-
IClouds contacts x my Mac contacts
My iClouds contacts are OK. But not on my Mac and my iPhone. How do I download the iCloud contacs to my Mac? I'm afraid to lose/ delete the iClouds correct ones. Any help? Thank you so much.