How can i Omit the chars in the string

Hi Gurus,
I have a input variable, assume that in that variable the value is like CAD0586/08 or BR80195/08.
my requirement is i have a new variable in that the value should be, starting alphabets should be omitted in the above variable.
ie
my input value is like var1 = CAD0586/08 or BR80195/08
my output should be
var 2 = 0586/08 or 80195/08
i have to perform this in SAP script. what is the logic for this.
regards,
Lakshminarayana

Hi ,
data : var1 type c,   (give a specified length)
          var2 type i,
          var3 type i
*Make a range table(r_tab) , contain the digit from 0 to 9 .
w_tab-low = '0'
w_tab-sign = 'I'
w_tab-option = 'BT'
w_tab-high = '9'.
append w_tab to r_tab.
var2 = strlen (var1).
do var2 times.
if var2+0(var3) not in r_tab
continue.
var3 = var3 + 1.
endif.
enddo
now take offset of var1 from position at var3.
var4 = var1+var3(var2).
Thanks
shambhu
Edited by: shambhu sharan pandey on Oct 27, 2009 7:16 AM

Similar Messages

You changed the order of the menu for "Open in a new window" or "Open in new Tab", How can I change it back? Or how can I omit any reference to tabs? I do not use them at all.

You changed the order of the menu for "Open in a new window" or "Open in new Tab", How can I change it back? Or how can I omit any reference to tabs? I do not use them at all.

You can use the Menu Editor add-on to rearrange or remove menu items - https://addons.mozilla.org/firefox/addon/menu-editor

How can we delete a line from the table control .

hi all
how can we delete a line from the table control .
situation is.
created table control in se51 which will display the data of a table.
how could i select a line from the table control ?
how could i delete the selected lines form the table.
thanks in advance

Change the Table Control attributes such that user can only select a single record(row).
<u>Tip to delete a selected record</u>
1) write a module 'Mark' in the PAI as below
PROCESS AFTER INPUT.
MODULE cancel AT EXIT-COMMAND.
LOOP WITH CONTROL table_view.
MODULE read_table_control.
FIELD flag MODULE mark ON INPUT.
ENDLOOP.
MODULE user_command_0100.
2) Module Mark is below.
MODULE mark INPUT.
CHECK flag = 'X'.
x = table_view-top_line + sy-stepl - 1.
Delete itab INDEX x.
ENDMODULE. " mark INPUT
Table_view is the TableControl Name.
'flag' is of type char(1) available in the Internal table which was assigned to the select option in the table control.
<u>award if uesful</u>
Regards,
Sudheer

How can 2 people use itunes in the same household? we both have iphone 4 and separate id but the same itunes? pleasehelp

how can two people use itunes in the same household? i had a iphone before so alreday had an itunes account now me and my husband have upgraded and we now both have them. he has set up a username and i have mine yet when he logs in he seems to just get my account? please help

Decide which iPhone will be keeping the current iCloud account. On the one that will be changing accounts, if you have any photos in photo stream that are not in your camera roll or backed up somewhere else save these to your camera roll by opening the photo stream album in the thumbnail view, tapping Edit, then tap all the photos you want to save, tap Share and tap Save to Camera Roll. If you are syncing Notes with iCloud, you'll also have to email your notes to yourself so they can be recreated in the new account as they cannot be migrated.
Once this is done, go to Settings>iCloud, scroll to the bottom and tap Delete Account. (This will only delete the account from this phone, not from iCloud. The phone that will be keeping the account will not be effected by this.) When prompted about what to do with the iCloud data, be sure to select Keep On My iPhone. Next, set up a new iCloud account using a different Apple ID (if you don't have one, tap Get a Free Apple ID at the bottom). Then turn iCloud data syncing for contacts, etc. back to On, and when prompted about merging with iCloud, choose Merge. This will upload the data to the new account.
Finally, to un-merge the data you will then have to go to icloud.com on your computer and sign into each iCloud account separately and manually delete the data you don't want (such as deleting your wife's data from your account, and vice versa).

How can i use my account without the billing info, as i do not have a credit card. and my shipping and billing info is under US. i'm in singapore. how do i change this?

how can i use my account without the billing info, as i do not have a credit card. and my shipping and billing info is under US. i'm in singapore. how do i change this?

If you are just visiting Singapore, then leave the account as it is. If you have moved there, then view your account using the iTunes app on a Mac or PC and change the country/region to your current location and address. If you do not have a bank card, you can fund your account using iTunes gift cards if available in Singapore.

How can I save multiple titles under the same DVD?

I use HandBrake to rip DVD's into iTunes. How can I save multiple titles under the same DVD? For instance, I have a Jimi Hendrix documentary that comes with special features, such as concert performances. I would like to have the main feature and the special features saved in my iTunes under the same title, perhaps as different 'tracks' (kind of like how different songs can be saved under the same album).
Is there a way for me to do this, or am I chasing phantoms?

*This response is for iPhoto 11 (v9). If you're using an earlier version, please post back and let us know. Troubleshooting steps are not the same for different versions. To find out which iPhoto you have: iPhoto Menu -> About iPhoto)*
Duplicate the photo first. (Photos -> Duplicate). This means that you will have multiple copies of the master as well as the edited version.
If you use versions like this often and wish to have only one master then you can do this with Aperture.
Regards
TD

When importing songs of a same album but different artist iTunes will separate the artists. How can I bring all together in the same album?

When importing songs of a same album but different artist iTunes will separate the artists. How can I bring all together in the same album?

Generally setting a common Album Artist will fix things. For deeper problems see Grouping tracks into albums.
tt2

How can I get iTunes to display the tracks from a CD in their original (album) order?

To be absolutely honest, I don't really understand what this box is for, so I shall just use it to repeat and expand on my question. (I have already sent a "Feedback" comment on the same topic).
How can I get iTunes to display the tracks from a CD in their original (album) order?
It seems to me that there is something very basic wrong with the way iTunes handles CD Tracks.
Professionally produced CD tracks are seldom if ever in a randomised order. Why then does iTunes seem unable to display the tracks in the order they appear on the original CD source - whether from a personally owned CD or from a download from the iTunes Store?
Some music demands a specific, non-alphabetic sequence in order to make sense. Why does it seem that iTunes only offers Alphabetic, or reverse alphabetic order - both of which make a nonsense of the original, often intended order of tracks?
Why not replace the so-called "cover-art" in the bottom left hand corner if the iTunes window - which, while it may look attractive to some, gives the barest of information concerning the original disc, with a list of the original CD tracks in their original order, so that the user can easily reestablish the order in which they should be played.
As I would expect legibility might be a problem with doing this, why could not the original contents, (in their original order), at least, be displayed when the "cover art" is double clicked-on - the result of which at present gives me an enlarged version of the "Cover Art". While on the subject of the contents of the source disc, what about all the album notes which someone takes trouble to write in order to increase the appreciation of the music on the CD and the listener's general background knowledge of the artists involved. Such notes, it seems to me, have considerable intrinsic value in their own account. I would, I think, normally be prepared to buy such "Sleeve notes" - so long as a "taster" was supplied (as it is for the music) - for something like the cost of a single 'Tune" on iTunes.
These two aspects let Apple iTunes down enormously, in my opinion. I think that by chopping even quite protracted sequences of music up into bits does no one any favours - except perhaps Apple's already quite substantial bank balance. People have to be aware that two and a half, to three and a half minutes is a very short time to develop a piece of worthwhile music, and that there are many, many composers, not all of whom are alive today who have written music that huge masses of mankind value for the enrichment of their lives and the human condition in general.
Please make the viewing of iTunes tracks in their correct order by default possible. By all means have the alphabetical variations available as offering a different approach to the music, but not the sole approach to it - PLEASE.
Frustratedly yours
Alan Whitaker
PS I work at my old 24" iMac Intel Core 2 machine which runs OS "Tiger" - because it is more beautiful to look at, the screen is more pleasant to work on, and because, in some ways it is more capable (it will run FreeHand MX without needing a "patch"), than my more recent 21.5" which runs "Snow Leopard". (I don't find it that much slower, either).

Dear Mike
Thanks for the support. I am utterly amazed that after all the hype about how good iTunes is that it cannot play a downloaded CD in the correct order, and that what that order should be is not available directly from within one's own iTunes installation. (I know that one can go back to the iTunes Store to check what the order should be, but having downloaded the tracks surely iTunes is clever enough to retrieve this important information.
My iTunes to differ from yours in that I have also noticed that it seems unable to download copies of my "talking books" in the correct order either. But in my case it downloads them - from a CD - in order, but with the first track downloaded first - so that it appears at the bottom of the column of tracks so that it would get played last! (At least this is, while being inexplicable, a relatively "logical" bit of blundering and because of this is relatively easy to put right!).
I like many genres of music, some of which are not really programmed except perhaps by the artist performing them. I know that Frank Sinatra was very careful to programme his album songs to obtain a particular effect and in relation to the keys of the music. iTunes presumes to know better.
Film scores may be totally randomly put together, in some cases, but in others the order is vital to one's appreciation of the music as a whole and how it relates to the plot of the film.
In symphonic music most works are divided into sections and are conceived by the composer that way. Some individual sections may gain a life of their own if played separately, but they are never complete in the sense that the composer envisaged them without being placed in their proper context.
Opera and probably most choral music too, is similar except that the words may well become meaningless if the order is changed at the whim of a piece of ill-written computer code, while ballet music has to be heard totally within its sequential context or it becomes meaningless.
Finally, I would venture that iTunes, by jumbling up the order of the tracks as recorded on a CD, does an immense disservice, not only to the music on a particular CD, but to music in general, by expressing everything in terms of "Songs" - which it seems to interpret as stand-alone items of between 2 and 4 minutes whatever the genre. Even the way the iTunes publicity speaks of how many "songs" it can store instead of how many minutes or hours of recorded sound. This has to be another brick in the wall of "dumming-down" of people's expectations, and the shortening of their attention spans.
I don't know about anyone else, but I feel betrayed by Apple over this. Perhaps the look, feel and general presentation of an item are not the most desirable features of a consumer product. Maybe it should be judged more on it fitness for the purpose for which it was sold. There is one other possibility - that Apple are trying to redefine "Music" - and that everything that lasts longer than about 3.5 minutes or is in the form of what could for want of a better term be called symphonic in the broadest sense is something else - not "Music" within Apple's new definition, at all!
Well that's off my chest! now I can get down to creating some sort of order in my iTunes Libraries, knowing that I have to reconsult all the sources in order to confirm the source playing order.
Anyway thanks again. At least I know that it is not just me
alanfromthatcham

How can I get all photos from the camera roll onto the photo stream so they will share between iphone and ipad?

How can I get all photos from the camera roll, and all new pictures taken, to get on the photostream so they can share between iphone and ipad?

When turning PhotoStream on with photos available in the Camera Roll, only photos captured by the iPhone or saved on the iPhone are placed in the PhotoStream.
For all photos that were in the Camera Roll prior to turning PhotoStream on, import the photos with your computer and add the photos to your PhotoStream on your computer.

How can I get someone to answer the phone? I'm ready to give VERIZON my business. I sat on the phone for over 20 minutes only to be transferred to "Sales." I then sat on the phone for another 15 minutes!!!! I finally hung up.

How can I get someone to answer the phone? I'm ready to give VERIZON my business. I sat on the phone for over 20 minutes only to be transferred to "Sales." I then sat on the phone for another 15 minutes!!!! I finally hung up.

It takes an enormous amount of patience and time to get through to a qualified person.
My Samsung S5 was locked out and needed a factory reset. Including attempts to achieve this locally, it took over an hour before my problem was even addressed.
You may be interested in my journey to a very good technical support person.
First I called the local sales person who had given me his personal business card with the friendly advice to call me with any questions. No answer at about 8:30 am when the business was open. His voice mailbox was full.
Then I called the local store where I had purchased the phone. The person who answered the phone had learned all the proper stock phrases, but was not familiar with the issue, stated that there were no customers in the store, and I should go there in about an hour when there would be more staff. He suggested dialing *411 from my phone (which was locked). Then he gave me a number to call Verizon, which he had to look up, and it took a minute or so. The number was (removed). That is an internal number for employees and contractors and requires a code to access, obviously not designed for customers' use. He finally cut me off by stating that there were a number of customers in line waiting for his attention!
After researching all my papers I found 800-922-0204 on my bill. The automated message suggested a hold time of 5 minutes, it took 20 minutes for a Customer Service Representative to pick up, and then I was referred to technical assistance. The hold time was announced to take 5 minutes, after 12 minutes I finally was connected.
Fortunately I had my computer set up for Skype on a loudspeaker, and was able to do some other paperwork while waiting.
Persistence was rewarded by having the good fortune to be connected to a very experienced, qualified and patient technical support staff with the name of Thomas (removed). He solved my problem, answered my questions during the process of resetting the phone, and gave an example of courteous and kind customer service that I had never experienced before when dealing with any major internet company.
>> Edited to comply with the Verizon Wireless Terms of Service <<
Edited by: Verizon Moderator

How can I make a folder in the TV for my home movies

How can I make a folder in the TV shows for my home movies collection? I have created a folder in the library in finder and put all the videos in there but they do not appear in itunes.
pshultz

It's best to never move iTunes media around in Finder. Add it to the Library through the iTunes interface by dragging them into the window. Once they've been added to the library, you can try using Get Info on the files in iTunes and change the tag info to make them group together. (A unique album name should do this.) If you want them to be included with TV Shows, you can try using Get Info to set the Kind to TV Show (found under the Options tab in Get Info), but I'm not sure if it will work. Otherwise, you could make a playlist and drag them into to access them all in one convenient spot.
If you add the items as noted above and they still do not appear in your library, it's probably because they are not a compatible format.
Message was edited by: Diane Wordsmith

How can I make different catalogs from the same image

How can I make different catalogs from the same image where that image has been changed in some way between the catalogs. For instance if I wanted to have a catalogs for cropped images and have 3 catalogs one for 4x6 , 5x7 and 8x10 cropping. When I tried this , if I changed a file in one catalog that same image in the other would change also.

Do not confuse the creation of the crops and the display in collections per crop ratio.
Of course one virtual copy (VC) per crop ratio is needed. If the same image should be cropped in all 3 mentioned ratios there would be 3 VCs.
The OP asked how to have/see a set of same-crop-ratios.
After having created the virtual copies for whatever crop ratio he wants, the way to display this result in the fashion asked for is via smart collections, provided they can be found. Without a plugin the naming of the VC with the crop ratio applied is a straight way to achieve that.
IF the wish is to get new crops automatically added. (See my answers 2+3)
IF the wish is to creat static collections per crop ratio for a certain set of images, I'd go as follows:
1. Select all images you want to have cropped in that way,.
2. With this selection click on the + to add another collection and fill the dialog box like this:
Then navigate into this newly created selection and perform the 4x6 crop - according to taste individually or by synchronizing the first crop.
Cornelia

How can I import data in to the digital word generator in Multisim?

How can I import data in to the digital word generator in Multisim?
I just received this comment from a friend, a RADAR engineer, who has just down loaded Multisim. He has been using HP/Agilent software. He has a work around using a piecewise linear voltage waveform with data imported from Excel but this is not really a good solution. It would also be helpful to import data from Mathcad or equivalent.
"I thought I was about to be impressed with MultiSim but it ended only in disappointment. There is a word generator in the simulation instrument panel which can drive the DAC with a waveform and it can have thousands of lines of values. I opened Excel, wrote the formula to generate the time and voltage points for a chirp, converted to DAC values in Hex and then went back to the word generator in MultiSim to load the values only to find that you have to enter each value manually. It doesn’t even allow you to paste in a list of values from a text file. I’m not going to type 5000 values by hand. If you get the chance to give feedback to National Instruments please ask them if the paste option can be added to the word generator. MultiSim is useful in many regards, but in this case, it left me with the impression that it is considerably limited in capability compared to what I’m used to."

Hi,
You can load your data automatically in the Multisim word generator. Follow these steps:
- Save your data file (in excel .xslx ir .csv format) on your computer
- Change the extension of the file to ".dp"
- Double-click the word generator in Multisim and click on Set...
- In the Settings dialog box, click on Load and then Accept
- This will prompt you to select the .dp file you have on your computer, select it and you're good to go
However, in Multisim you have the option of creating your own custom simulation analysis and instrument.
I will try creating the instrument and send it back to you but it might take some time.
Multisim and LabVIEW are very powerful in test automation, with the custom instruments you create for Multisim you don't need to export your data file into excel from LabVIEW (or MathCAD or other tools) and then reload it into Multisim. The test procedure is automated instead.
Please check this reference design about automated simulation
http://zone.ni.com/devzone/cda/tut/p/id/7825
Here is how you can create your own custom measurement tool in Multisim and LabVIEW, but as I mentioned, I will create the word generator and come back to you anyways
http://zone.ni.com/devzone/cda/tut/p/id/5635
Let me know if you have any questions.
Mahmoud W
National Instruments

How can i display a portlet in the Edit view only ?

Dear All,
I'm developing a portal in which the end user can change the content of the portal page (personalize) using Edit smart link and i ask How can i display a portlet in the Edit view only ? not shown in the production view ?

Last time I heard with Oracle they said the only way is to look at the current URL. If it contais _mode=16 then we are in edit mode.
This is a function I use:
FUNCTION inEditMode return boolean is
bEdit boolean := false;
begin
if PORTAL.wwpro_api_parameters.get_value('_mode', 'qaz') = '16' then
bEdit := true;
end if;
return bEdit;
end inEditMode;
Kind regards
Tomas Albinsson
Stockholm, Sweden

How can I get netflix streaming audio, the video is fine but the audio coming through is from the TV(dish)

how can I get netflix streaming audio, the video is fine but the audio coming through is from the TV(dish)

It's exactly as I stated. Whenever I try to drag these kinds of loops (ESX24 / software instrument loops? the ones marked in green with the white music note next to them) from the loop browser into the timeline a message comes up saying Audio Not Found for that loop. And a new track is created automatically when loops are dragged into the timeline, so I'm not creating some other random / synth instrument track so I'm not sure what the deal is... But perhaps I'll try creating a software instrument track first and then drag the loop into that track and see what happens - maybe there's something with the default settings that automatically creates audio tracks whenever loops are imported?

How can i transfer videos without losing the sound to my iPhone 3G?

Hi
I have bought my iPhone 3G yesterday. I have found out how to transfer music from iTunes however i can't transfer videos. I'm selecting the videos i want to transfer on the videos tab after i chose my iphone from the side menu and pressing apply. iTunes says that its syncing my iphone but it doesnt transfer the videos.
Lately i have found out a function on the advanced menu for movies as "create iphone or ipod version". When i used that it transfered that video to my iPhone however the sound was completely lost besides that action takes too much time(around 10 mins for a 3 min video and i have a pretty strong computer).
How can i transfer videos without losing the sound to my iPhone 3G?

One thing I'd recommend is that you make sure the video/audio you're trying to transfer falls within the guidelines listed in the 'Video' section here:
http://www.apple.com/iphone/specs.html
What's most likely happening is that the file is not converted as such so when you try to transfer it, it's wanting to convert it but is unable to for any number of reasons.
There's software out there that might make this easier for you but I can't recommend anything specifically.

How can i Omit the chars in the string

Similar Messages

Maybe you are looking for