How can I open raw files from my Nikon D7100 in CS4 or CS5?

How can I open raw files from my Nikon D7100 in CS4 or CS5?

Andy,
In the simple and short form, what happens with the ACR (Adobe Camera RAW) module is that it gets updated with regularity, to accommodate the camera mfgr's. changes for their newer models. That ACR works within the host program, such as Ps, PsElements, Lightroom, etc.. At a point, Adobe ceases to support older host program versions. When that happens, the user has a few options:
Upgrade the host program version
Use another host program, such as PsElements or Lightroom
Use the free DNG converter, per Curt's suggestion. That is not host program dependent
Glad that the DNG Converter works for you.
Good luck,
Hunt

Similar Messages

  • How can I open RAW files from Nikon D7100 in Photoshop Elements 9?

    How can I open RAW files from my Nikon D7100 in Photoshop Elements 9

    Three choices:
    1. Upgrade to PSE11
    2. download the free Adobe DNG Converter and then convert your RAWs to DNG, which will open in PSE9
    3. Use manufacturer's software and convert to TIF (or JPG)

  • How do I open RAW files from the Nikon D4s in photoshop?

    How do I open RAW files from the Nikon D4s in Photoshop? I have the updated newest version.

    The Nikon D4S is a brand new camera which has just been added by Adobe to Camera Raw 8.4.
    http://labs.adobe.com/technologies/cameraraw8-4/?tabID=details#tabTop
    8.4 has not yet been finally released but you can download and install a pre-release copy for CS6 and CC (it is not compatible with CS5 and earlier)
    CS6:http://labs.adobe.com/technologies/cameraraw8-4/
    CC: http://labs.adobe.com/technologies/cameraraw8-4-cc/

  • I'm using a 30 days trial of PS  CC...but I Can't open raw files from my NIKON D 7100

    I can't open raw files in PS CC.
    I'm using NIKON D7100.

    Noel,
    Good morning, and may I just add  THANK YOU!
    While certainly not as efficient or handy, that is the answer.  I simply
    instructed my PC to open the containing folder, in this case my direct card
    reader, and manually copied the files to my hard drive (highlight first and
    last-SHIFT-Enter) and moved them to a pre-named subdirectory.
    I opened PScc and pointed to that file, clicked on the photo I wanted and
    VIOLA!  Opened in Camera Raw and I was off to the races!
    Perhaps the user groups can make some noise and someone at Nikon may take
    notice!
    Thanks again for the suggestion.
    Larry

  • How can I open raw files from Canon Mark III on iMac 10.5.8?

    I bouth upgrade to the CS5 and got CS6 but it looks taht my iMac 10.5.8 cannot install Ps Cs6 since its software is too old ( 10.5.8). Do I need new computer to do so cause I cannot find upgrade to my computer which is not that old ( I bouth it in Jan 2009). What can I do.please help!

    Buy the Snow Leopard OS and then update to
    Mac OS X 10.6.8 Update Combo v1.1
    That should get you what you need.

  • Can't open raw files from a supported camera

    Hi.  I just uninstalled pse 12, installed pse 13 and ran all updates.  I still can't open raw files from my Nikon D5200, which is a supported model.  It works on a Vista system I have with pse 12, so it definitely isn't the camera.  Any ideas?

    The D5200 has been supported since midway through PSE11’s life, so PSE12 and PSE13 should work ok.
    I’d suspect that the NEFs have been touched by Nikon software which can rendering them unrecognizable to Adobe products.  You can test for this by using Explorer to copy a newly shot raw file from your memory card to the computer and then see if that will open, making sure no Nikon software has viewed it or been involved in the copy process.
    If the files are corrupted, then a utility from here can reverse it:
    http://owl.phy.queensu.ca/~phil/exiftool/fix_corrupted_nef.html

  • How can i open RAW files in Photoshop CS4 from Canon EOS 6D camera?

    How can i open RAW files in Photoshop CS4 from Canon EOS 6D camera?

    You can't directly but can use DNG Converter to convert your files so ACR can read and process them.
    Camera Raw plug-in | Supported cameras
    Camera Raw-compatible Adobe applications

  • Can't open raw files from Nikon d800 in PS CS5 and can't update Camera Raw plug-ins

    Can't open raw files from Nikon d800 in PS CS5 (Win7 64-bit). It says, the model not supported by Camera Raw. Tried updating Camera Raw plug-ins for d800 but keep getting error message: Update failed, Adobe Application Manager may be damaged. Re-install the latest application manager but still the same error message. How to fix?

    These links may help
    Adobe - Photoshop : For Macintosh
    Adobe - Photoshop : For Windows
    Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6

  • Can't open raw files from my D800E in CS5. What is the fix for this?

    How do I fix this problem? Can't open raw files from my D800E in CS5.

    You could try Help > Update, but that was a flakey process in CS5 times.
    It's better to download and instally manually.
    Windows
    http://www.adobe.com/support/downloads/detail.jsp?ftpID=5603
    Mac
    http://www.adobe.com/support/downloads/thankyou.jsp?ftpID=5370&fileID=5003

  • How do I open raw files from a Panasonic DMC-GF5 using Elements10 on a PC?

    How do I open RAW files from a Panasonic DMC-GF5 camera using Elements 10 on my PC?  When I try to open a Raw file I get a message 'wrong type of file'

    I believe you need ACR 7.1 which PSE10 cannot be updated to. 
    Use the DNG Converter to make DNGs from the RAW files and those should open in your older PSE version.
    You can also buy a newer version of PSE.  Perhaps do a Trial (Try) of PSE12 and see if PSE13 comes out in the next week or so.
    The DNG Converter can be found on this page:  http://www.adobe.com/downloads/updates
    PSE12 Trial: http://www.adobe.com/downloads.html

  • How can I  process raw files from lumix GH4 on photoshop elements 12?

    How can I  process raw files from lumix GH4 on photoshop elements 12?

    Your files should open in photoshop elements 12, since there is only one version of camera raw 8.5
    (RC means a release candidate of 8.5, which came before the final version of camera raw 8.5 and was for testing)
    In the pse 12 editor if you go to File>Open and select one of the lumix GH4 and then press Open, what happens?
    In the pse 12 editor, if you go to Photoshop Elements>About Plug-in and click on the words Camera Raw, what version does it say?

  • How can I upload raw files from my canon g7x to lightroom5

    How can I upload raw files from my canon g7x to lightroom

    See this thread in the official Adobe feedback forum: Why doesn't my version of Photoshop or Lightroom support my camera?

  • Can not open RAW-Files from Nikon D4 in Photoshop cc

    hi. i can not open RAW-Files from Nikon D4 in Photoshop cc. (Camera RAW 6.7) can you help please?

    ACR 6.7 would be for an older product, PS-CS5 or PSE10 or PRE10.
    What does Help / About Plug-ins… / Camera Raw… show in PS-CC for a version for ACR and is there more than one version of ACR in the Help / About Plug-in list.  Help / About Plug-in is what I’d do on Windows; I’m not sure if the menu path is the same on a Mac or not.

  • Can't open RAW files from a Canon 70D

    Can't open RAW files from a Canon 70D with Photoshop Elements 12.  Is there an upgrade / download available.  Current RAW plug in is version 8.0.0.137

    What operating system are you using?
    The newest version of camera raw for pse 12 is version 8.4, which should open the canon 70D files.
    Have you tried Help>Updates from within the pse 12 editor?

  • I can't open RAW files from new Sony Alpha a6000 camera in PSE 11 camera raw editor. Is there an update that will allow me to do this or do I need to always use DNG convertor?

    I can't open RAW files from new Sony Alpha a6000 camera in PSE 11 camera raw editor. Is there an update that will allow me to do this or do I need to always use DNG convertor?

    You would need to update to PSE 12, or just keep using the DNG converter. Your camera requires ACR 8.4, which isn't compatible with PSE 11. It's also not compatible with PSE 12 if you are running Vista or XP.

Maybe you are looking for

  • EA6500 First Day Impressions & Advise.

    My first impressions of the EA6500 are a little rocky, anyone who doesn't know router settings like I do or knows their way around web-based browsers probably won't be able to even get online, yes really.  This router has probably in my opinion been

  • External Hard drive No Longer Readable by Macbook Pro

    I've been using a PQI Portable HD 551 external drive to back up my files for some time now. I haven't backed up since 9/21/12 and I tried to today and got the error message "The disk you inserted was not readable by this computer." I've had no proble

  • How to convert date format?

    HI, I want to convert one kind of data format like default to another kind of format like "DD/MM/YY". I remember I should use SimpleDateFormat class , but I fogot how to use it . Thanks gary

  • Sol Man Code Page = 4130?

    In a new installation of Solution Manger 7.0, the installer asks me: His "code page is 4130? .. This related AMERICAN_AMERICA.UTF8 user Oracle admin and SAP admin? What is the relationship that exists between the two (code page and UTF8)? What is the

  • Failure installing Air 2.7 upgrade from application installer

    Hi, We are developing an Air application and just updated our  SDK to Flex 4.5.1 and Air 2.7. When the application installer runs and  tries to update the system version of Air to 2.7 it gets an installation  error. This error has not been encountere